Workshop press with folding device

Zimas P100-1050

Condition: used, functionality: fully functional, machine/vehicle number: 294, spindle speed (max.): 1,250 rpm, spindle speed (min.): 40 rpm, total height: 2,300 mm, drilling capacity: 50 mm, total width: 970 mm, total length: 1,300 mm, spindle mount: MK 5, drilling depth: 240 mm, table width: 870 mm, table length: 670 mm, overall weight: 1,200 kg, Dear Sir or Madam, We are happy to answer any questions. This sale is made without any warranty or guarantee. Errors and typos cannot be ruled out. Please check the information in the PDF. No returns accepted. Ljdpjv T Aursfx Adkjrw

Condition: used, turning diameter / mm turning length / mm swing diameter over bed slide / mm Technical data - Model 230 DIMENSIONS Centre height on the bed: 230 mm Spacing between centres: 1000-1500 mm 2000-2500 mm 3000 mm Bed width: 360 mm Largest turning Ø: on the bed: 465 mm on the carriage: 278 mm on fixed steady rest: 200 mm on travelling steady rest: 160 mm CROWNING Width of the crank: 300 mm Distance between face plate edge and offset: 150 mm Largest turning Ø on the offset: 690 mm SPINDLE Ø of front bearing (inside): 110 mm Ø of rear bearing (inside): 95 mm Ø of hole: 77 mm Mounting Type - Cam Lock: 6" Internal spindle taper - taper: 1 : 20 Spindle taper - C. M. - N.: 5 Speed ranges: Slow feed - rev. 1': 15÷1000 Normal feed - rev. 1': 22÷1500 Fast feed - rev. 1': 30÷2000 FEEDS (without gear change)-N.: 108 Longitudinal feed range at revs. : 0.04÷4 mm Ljdpfx Adewz Rywokorw Transverse feed range at revolution: 0.02÷2 mm Lead screw - Ø: 40 mm Lead screw pitch: 12 mm THREAD (without gear change) Metric - N. 54 to: 0.5÷28 mm Module - N. 54 to Module: 0.25÷14 Whitworth - N. 54 to Wt. x 1": 56÷1 Diametral Pitch - N. 54 to D.P.: 112÷2 Inch - N. 54 to Inch: 1/32 ÷ 13 3/4" SPINDLE PIT Quill Ø: 75 mm Quill barrel: 220 mm Quill taper - vices N. 5 POWER Main motor - HP: 10 Pump motor - HP: 0.25 WEIGHT approx. - kg 2000-2220 2530-2720 2920 ON REQUEST Main motor - HP

Condition: good (used), Year of construction: 1985, machine/vehicle number: 4888, Offer 25234 Technical Data: - Drilling capacity in steel ST 60: 32 mm - Maximum drilling diameter in steel ST 60: 40 mm - Long spindle MK 3 - Drill spindle speeds steplessly adjustable - Range 1: 160 – 1125 rpm - Range 2: 320 – 2250 rpm - Drill spindle stroke: 120 mm - Feeds: 0.1 + 0.2 mm/rev - Throat depth: 293 mm Lsdjwylvqspfx Adkjrw - Column diameter: 115 mm - Table size: 300 x 300 mm - With 2 T-slots 14 x 224 mm - Emergency stop button - Machine vice - 10 pcs. HSS drill bits 10 – 25 mm - Required space approx.: W 500 x H 1750 x D 900 mm - Weight approx.: 270 kg

Condition: good (used), A used high-speed radial drilling machine Fab.DONAU Type: DR 32 with vice. The machine operates in all directions. The clamping to the right and left is weak. Therefore, we are selling the machine at a favorable price. Lrsdpfx Adewn Ex Usksw

Condition: good (used), functionality: fully functional, Data: Tool holder MK 5--- Drilling capacity with ST60 50 mm--- Infinitely variable speed ranges approx. 40 - 180 rpm + 180 - 800 rpm--- 5 feeds 0.1 / 0.14 / 0.2 / 0.28 / 0.4 mm/rev--- Lrsdpexa Egtjfx Adkew Table surface, 880 x 670 mm--- throat depth: 385 mm---

Condition: used, Year of construction: 1991, Work table 600mm x 1200mm Column travel 600mm Lrjdoxpfglspfx Adkow Tool holder MK 3 Drilling capacity 28mm in steel Tapping device Coolant system Documentation

Condition: good (used), Year of construction: 1979, functionality: fully functional, drilling capacity: 32 mm, overall weight: 1,870 kg, Drilling capacity into full 32 mm Tapping capacity into full M 32 mm Motor power 1.5 / 3 kW Tool holder MK 4 Quill stroke 170 mm Stroke approx. 400 mm Lredpfxsxlk Ade Adkow Speeds : Range 1 , infinitely variable from 38 - 192 rpm Range 2 , infinitely variable from 119 - 596 rpm Range 3 , infinitely variable from 400 - 2000 rpm

Condition: used, Year of construction: 1987, Work table 750mm x 1200mm Arm travel 800mm Tool holder MK 3 Lredpfoxpfhvex Adkjw Drilling capacity 28mm in steel Thread cutting device Coolant system Documentation

Condition: ready for operation (used), Year of construction: 1997, Padovani Labor E255 x 1500 cycle lathe Manufacturer: Padovani Model: Labor E255 x 1500 Lrodpfxjxmkv Ho Adkjw Year of manufacture: 1997 Condition: Used, good, powered up and ready for demonstration Video available.

Condition: good (used), DONAU DR 40 Z - High-Speed Radial Drilling Machine incl. Tools - Drill spindle taper MK 4 - Quill diameter 55 mm - Quill stroke 220 mm - 18 spindle speeds 35-1800 rpm - Drill feeds 0.075–0.60 mm/rev - Column height adjustment 450 mm - Drilling radius min/max 305–1005 mm - Table size 1200x600 mm - Drilling capacity / steel 40 mm - Drilling capacity / cast iron 50 mm - Thread cutting unit / steel / M33 - Thread cutting capacity / cast iron / M45 - Various tools included, see photos Dimensions: LxWxH 1.9x2.3x2.8 meters / Weight 1800 kg Ljdpfx Ajw En Sledkjrw Errors and omissions excepted.