Hydraulic four column press

SAHINLER HKP100

Condition: new, drilling on table: 120die cushion returning speed: 52die cushion stroke: 200die cushion press capacity: 30motor power: 11retracting speed: 165working speed: 8,5rapid traverse: 100daylight: 750pressure: 100tappet measurements: 900 x 600table diamension: 1100 x 700messurements (LxWxH): 2.180 x 1.600 x 3.350weight approx.: 9300total power requirements: 11stroke: 500 Knedpfx Aled Ab Imobjc

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Press cylinder, stroke length: 400mm Knsdpog Rn Efefx Albsc Press table with T-slot 1,500x900mm above 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. All statements without guarantee. Without transport costs.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser hours: 7,000 h, laser power: 4,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 750 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 80 m/min, power: 4 kW (5.44 HP), Equipment: CE marking, cooling unit, dust extraction, fume extraction, ONLY 7,000 OPERATING HOURS – LASER UNIT! Special Equipment: - Automatic front-opening sliding door - Cabin lighting - Movable pendant control panel - FastLine Cell - 2D cutting tables with support rails & drawers Standard description: - Machine frame with Y-arm and integrated laser unit - Laser unit: CO2 laser TruFlow4000, high-frequency excited - Maintenance-free turbo radial blower - Mirror telescope - Cooling unit - Positioning laser diode Knjdpfx Asyidpqolboc - Laser power control - Logbook function - Drives: maintenance-free three-phase servomotors - Illumination under the Y-arm - Magnetic coupling for processing head - Head detection - AutoLasPlus - Pendant control panel - TFT color monitor - Teach panel - Network connection RJ 45 Processing Methods: - Laser cutting - Dynamic cutting head (155mm) - Cutting head (240mm) - PierceLine

Condition: as good as new (ex-display), Year of construction: 2018, machine/vehicle number: DF0151 - Rev.00, pressing force: 110 t, pressure:110 t Knsdsdxrqwjpfx Alboc passage width:800 mm stroke:500 mm Approx. weight (w/o operational materials):5 t Measurements L x W x H:ca. 1950 x 1510 x 3145 mm Return Capacity:11 t Engine Output:20 kW Cylinder diameter:200 mm Max Working height:700 mm Approaching Speed max. :195 mm/sec Pressure Speed:1 - 15 mm/sec. Return Speed:5 - 140 mm/sec Travel:500 mm Ram plate:800 x 600 mm Thickness of ram plaet:6 Zoll Table size:800 x 700 mm Table height above ground level (approx.):900 mm Oil Tank Capacity:400 l Program Memory:200 prgms Monitor Siemens:10 Zoll Siemens Control System:S7 1200 Lightcurtains by Schmersal:700 mm Speed controlled via proportional valve for speeds between 5 to 195 mm/sec on approach, 1 to 15 mm/sec during pressure phase and 5 to 140 mm/sec during return. HMI - pressure regulation for capacity of hydraulic cylinder from 20 to 110 tons Siemens remote access for maintenance purposes Motor with energy efficiency level IE3 according to CE

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Kjdjfz A D Nspfx Albsnc ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: good (used), Suhner Sumatic BEM 20 + Polydrill Drilling Unit Manufacturer: Suhner Model: Sumatic BEM 20 + Polydrill kW: 2.2 V: 380/220; 460/230 A: 5.7/9.8; 4.9/8.5 Hz: 50/60 RPM: 940 / 1150 Spindle mount: 13 mm, 25-125 mm, double spindle drill head Knedpsd Huvqofx Albjc

Condition: new, Year of construction: 2017, machine/vehicle number: DF0152, pressing force: 80 t, pressure:80 t stroke:500 mm total power requirement:12 kW weight of the machine ca.:5,1 t Controll:Zweihandbedienung cylinder:1 work height max.:800 mm working area:800 x 800 mm Table dimensions:800 x 800 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec Knodpfxjfxyh He Alboc :700 mm Column-Diameter:75 mm :10 kW main drive:WEG 15 kW pump:REXROTH, Parker elektronische Axialkolbenpumpe kW :25 (bei280bar) t :200 mm :30 mm :80 mm/sek. :REXROTH/Parker :REXROTH/Parker :300 L :ca. 250 L :über PLC (Mindestdruck 10 to :zur Ölabkühlung ? mit Elektroventilator :manuell, über Schmiernippel oder Kartuschen :SIEMENS / MOELLER :auf Schwenkarm :automatisch über 2 Handbetrieb mit Schlüsselschalter, manuell über Bedienpult im Einrichtbetrieb :Zweihandbedienung beweglich, :zur Datenübertragung :Siemens für Fernwartung :zur Hublängeneinstellung :0 ? 10 sec. Oil tank capacity:150 l :800 mm lang, vorne und hinten, 300 mm unten diagonal

Condition: new, pressure: 100motor: 11daylight: 500stroke lenght (max.): 400Tappet adjustment: 790 x 600table height: Fußboden zu Tischplatte Oberkannte - 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 barControl / Key Switch Modes:Setup Mode – Manual operation without light sensor Automatic Mode – Full speed with integrated light sensor Hydraulic System:Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 pcs, Ø 50 x 30 mm Auxiliary Guides: 2 pcs, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc, 23 L/min – Helical gear pump Speed:Approach: 110 mm/sec Return: 200 mm/sec Pressure phase: 9 mm/sec Machine Dimensions:Daylight Opening: 500 mm Stroke Length: 400 mm Ram Plate: 790 x 600 mm (with T-slots) Ksdowrkctspfx Albsnc Table Plate: 790 x 600 mm (with T-slots) Table Height: 850 mm (from floor to top of table) Hydraulic Equipment:REXROTH hydraulic control block & components Pressure adjustable via PLC (20 – 100 tons) Speed adjustable via PLC Air oil cooler Pre-fill valve Pressure hold valve Control System:Siemens S7-1200 PLC Main control cabinet Safety PLC (SICK) Light curtains (SICK – 700 mm) Linear encoder for stroke adjustment 10” PLC touchscreen – BEIJER (German & English) Movable two-hand control unit Ethernet connection for remote support Visual and acoustic fault alarms Dual work area lighting In full compliance with EN 693 machine safety regulations Side safety doors (outward opening) Hydraulic proportional valves Dual-channel safety control User manual & parts list (German) Oil Volume: 220 L (Tank capacity: 250 L)Total Weight: approx. 5,500 kgOverall Dimensions: 1300 x 2000 x 2750 mmColor: RAL 7035 Light Grey & RAL 7016 Anthracite Grey Besichtigung unter Strom bei uns in Böheimkirchen 3071 (Neustiftgasse 34) möglich.

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic CNC press, 100 tons (1,000 kN) pressing force Siemens SPS1200 series 10" Beijer display Stroke 400 mm Table size 790 mm x 600 mm Feed speed 110 mm Return speed 140 mm Sick light curtain Remote maintenance module installed Kedonp Ndhjpfx Albonc Rexroth hydraulics with cooler Modifications can be implemented upon request Upon request, the manufacturer can supply C-shaped frames for presses with a pressing force of 10 tons to 400 tons and variable dimensions.

Condition: new, pressure: 100stroke: 300total power requirements: 7,5weight approx.: 5400messurements (LxWxH): 1900 x 1300 x 2750table diamension: 1100 x 600tappet area: 680 x 420drilling on table: 120daylight: 500working speed: 5,5retracting speed: 37rapid traverse: 17,5 Knodpjd Ab Iyofx Albjc