Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood MAWEG ROTOR 6000. Material size 6000 X 900 x 200mm 4 working areas, automatic rotation. Psdpfx Aezraalodlorc 12 pcs hydraulic cross pressures per 1 area 12 pcs hydraulic surface pressures per 1 area Self weight 7000kg. Very good condition. Available immediately.

Condition: like new (used), functionality: fully functional, HOT PRESS with electric heating of plates , model ORMAMACCHINE NPC/E/DIGIT6/90 second hand machine working condition: excellent for wood, corian, joinery, furniture, custom furnishings, panels, doors, composite materials, and more maximum temperature: 140°C CE-certified machine plate dimensions: mm. 2500 x 1300 electric plate heating n.6 pistons, diameter: mm.70 opening: mm.400 total thrust: 90 tons automatic opening with timer Prsdpfjzwphpjx Adlsc pressure: 3.3 kg/cm2 n.4 racks for smooth movement of the lower plate hydraulic motor power : Hp 2 electric plates: Kw 17,8 overall dimensions: 3300 x 1550 x 1900 mm weight: 2800 kg volts 400/50 total installed electrical power Kw 22,5 ability to set separate temperatures for the plates daily programming for automatic turning on the machine heating the plates are composed of a chipboard support and a 12 mm thick aluminum plate containing the heating elements. the Digit series is equipped with an electronic control panel for managing the pressing parameters (temperature, pressure, and closing time)

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: Psdpfx Aszvq Rcodlorc • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, documentation/manual, • Suitable for pressing veneer, fire-resistant panels, decorative paper, etc. • Suitable for laminating furniture panels, partition walls, wooden doors, or for laminating all kinds of decorative materials onto composite boards. • The press can also be used for drying or smoothing veneer. Pressing force 100 tons Dimensions of heating plate 3000 × 1300 × 42 mm Number of working layers 1 layer Number of heating plates 2 pcs. Distance between heating plates 200 mm Surface roughness of heating plate Ra ≤ 1.6a (2.5 μm) Cylinder diameter Ø 85 mm, material: steel Number of cylinders 8 pcs. Power of hydraulic press motor 5.5 kW Heating method Heating oil Heating power 24 kW Pjdpfezhv Svox Adljrc Power of circulation pump 1.5 kW Pressure per cm² 3.07 kg/cm² Maximum heating temperature 130°C Press dimensions 4200 × 1670 × 1900 mm Press weight 5300 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total width: 1,700 mm, total height: 1,500 mm, total length: 3,050 mm, briquette diameter: 90 mm, overall weight: 5,800 kg, type of input current: three-phase, power: 80 kW (108.77 HP), year of last overhaul: 2014, Equipment: cooling unit, emergency stop, Complete, turnkey production line for wood briquettes based on the C.F. Nielsen BP 6000 mechanical briquetting press – a benchmark for high-density, round briquettes. The line covers the entire technological cycle and is offered as a single package with all auxiliary units. Process: raw material storage → metered screw feeder → high-pressure pressing → cooling line → automatic squaring saw → roller conveyor → two-stage Kallfass packaging (film wrapping + heat shrinking). Key data – C.F. Nielsen BP 6000 press: Round briquette Ø90 mm Output 1,200–1,800 kg/hour (depending on the material) Main motor 55 kW with soft starter Siemens PLC control Lubrication on bronze bearings Dimensions ~3,050 × 1,700 × 1,550 mm, weight ~5,800 kg Included: 2 flywheels, control cabinet, Grundfos oil cooler, Ø90 mm dies Scope of supply (complete line): C.F. Nielsen BP 6000 mechanical briquetting press Feed hopper (~1,300 × 1,300 × 1,200 mm) Mixing and transport screws Feeder with rotary valve + control cabinet OBL MB 75 PP metering pump (max. 420 l/hour) Psdpjztq Hxsfx Adljrc Cooling line – 10 × tube Ø90 × 3,000 mm, with supports Most MBC 100 P squaring saw (disc Ø350/30 mm, cut 100 × 100 mm) Roller conveyor (3,500 × 490 mm, 46 rollers) Kallfass Wrapmat 900 wrapping machine Kallfass 950 Uni heat shrinking tunnel (27 kW) with KORA PACKMAT friction feeder Condition: according to documentation, machines are fully refurbished and stored in original packaging, unused. Some units (cooling line, saw) are still in crates; the feeding section is shown installed. Offered as a single, complete line, sold “as is” – inspection is welcome. Ideal for manufacturers of wood/biomass fuel briquettes (sawdust, wood chips, wood shavings) who are looking for a proven European line at the price of a single used press. Price: €80,000 net (excluding VAT), entire line with all components. Delivery – self-collection, location on request. Photos and technical documentation – upon request.

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Briquetting Machine Diameter of briquetting drums: 800 mm Working width of briquetting drums: 900 mm Rotational speed of briquetting drums: 8 rpm Number of working rollers: 4 pieces Mixer Drum diameter: 1,500 mm Number of mixing blades: 4 pieces Rotational speed of mixer: 17.8 rpm Screw Conveyor Length: 4,000 mm Width: 850 mm Rotational speed of screw shaft: 36.6 rpm Prjdpfx Adezr Efaoljc MACHINE DETAILS Suitable materials: anthracite coal, lignite, wood, bulk materials Design: Supporting structure including base housing for briquetting unit, mixer, and screw conveyor EQUIPMENT Belt conveyor for separating fine particles and non-briquetted material Single-shaft paddle mixer Driven screw conveyor 4 additional jackets for preparing further dies

Condition: used, Year of construction: 2006, operating hours: 926 h, functionality: fully functional, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, overall weight: 750 kg, Equipment: emergency stop, Hydraulic briquetting press for compressing dry wood chips, sawdust, paper, cardboard, and other similar materials. Pjdpfxeztl E As Adlerc Throughput (material-dependent) is approximately 30 to 50 kg/h. The machine was inspected at the WEIMA factory after 600 operating hours, and after that, I used the press very little. For this reason, I am offering the press for sale.

Condition: used, We are offering for sale a floor-type press made by the Italian manufacturer Colombo R. Available for immediate delivery. Pjdjzry Rwopfx Adlerc

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Shelf length: 3100 mm Shelf width: 1300 mm Clearance between shelves: 44 cm Number of pistons: 6 Hydraulic heating Safety cut-out with shear pin Year: 2015 Capacity: 5000 kg Power: 4 kW CE marking Pedeztcuzepfx Adljrc

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: A7879, functionality: fully functional, pressing force: 70 t, overall weight: 3,000 kg, opening width: 400 mm, TECHNICAL DETAILS Heating temperature: 70 - 100 °C Total pressing force: 70 tons Specific pressing force: 2.5 - 3.5 kg/cm² Opening width: 400 mm MACHINE DETAILS Control: Push-button control for opening, closing, and stopping Drive: Electro-hydraulic Heating plates: Aluminum Dimensions of heating plates: 2,550 x 1,100 mm Heating: Electric Hydraulic cylinders: 4 Diameter of hydraulic cylinders: 80 mm Rated voltage: 380 V Type of current: 3~ Frequency: 50 Hz Control voltage: 220 V Rated current: 21 A Power: 13.6 kW Dimensions & Weight Transport dimensions: 2,900 x 1,400 x 2,000 mm Prsdpfx Aezktpqodlec Weight: 3,000 kg EQUIPMENT Safety pull cord Pressure monitoring (automatic adjustment) Adjustable limit switch for specific opening width

Condition: excellent (used), functionality: fully functional, total length: 4,100 mm, total width: 1,600 mm, total height: 2,000 mm, Shelf length: 3500 mm Shelf width: 1300 mm Clearance: 390 mm Number of pistons: 6 Piston diameter: 80 mm Water heating Emergency stop with pull switch Predpezxpv Ajfx Adljc New Teflon foils on the plates Machine dimensions: Length: 410 cm Width: 160 cm Height: 200 cm

Condition: excellent (used), functionality: fully functional, shelf length 3000 mm; shelf width 1300 mm; water heating; 6 hydraulic cylinders; piston diameter 70 mm; new Teflon films on the shelves Pedpfx Adezxp Skjlerc

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, plate length 3500mm plate width 1300mm solid steel plates oil heating with included heater 8 hydraulic pistons pistons diameter 85mm Pjdpfx Adezxp Swjlorc total pressure 160 tons safety line switch year 2002

Condition: like new (used), Shelf length: 3000 mm Shelf width: 1300 mm Psdpezxgx Usfx Adlorc 6 hydraulic cylinders Clearance: 410 mm Water heating system Safety shear pin

Condition: good (used), Frame press, gluing press Prjdjb A H Dhjpfx Adlsc -operated: hydraulically -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100/H3700 mm -Transport dimensions: 4200/1200/H2300 mm -Weight: approx. 3500 kg

Condition: new, Year of construction: 2024, - Frame and edge press, single-sided/stationary - Usable dimensions in mm as a frame press: 2630 x 1610 - Usable dimensions in mm as an edge press: 3000 x 1610 - External dimensions in mm: 3200 x 2090 x 730 - Sturdy frame welded construction made of thick-walled profile tubes and laser-cut steel sheet parts ensures a torsion-resistant and dimensionally accurate press frame (no screwed frame parts!) - With left-hand counter bearing, sliding carriage for width adjustment, central locking system, and 2 manual hydraulic press units with ergonomic handles. - 3 roller-bearing, vertical pressure beams, type SK, made of thick-walled profile tube, galvanized, with manual hydraulic press units incl. ergonomic handle. 20,000 N pressing force, 60 mm stroke. Press units adjustable in a 50 mm hole grid. - Counter bearing at the bottom with safety lock, adjustable in 5 steps in the hole grid - Lower clamp with spindle pressure - Chassis with 4 swivel casters (2 with brakes) - Powder-coated (glue-resistant) gray-white RAL 9002, pressure plate and counter bearing cornflower blue RAL 5010 - The Quattra 1-SK version is equipped with a comfortable adjustment system for the manual hydraulic press units, providing additional safety for the operator. Prodpfohd Nywjx Adlec

Condition: good (used), Used machine, good condition. Delivery time appr. 7 weeks after ordering The basic machine starts at 135.000 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Podpfjfmqq Eex Adlorc Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 12 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 9 t, total length: 3,100 mm, total width: 1,600 mm, total height: 1,600 mm, overall weight: 750 kg, operating temperature: 200 °C, Equipment: CE marking, documentation/manual, The machine is designed for vacuum forming of various elements of thermoplastic plates such as: PP, PET, PS, HIPS, EPS, PLA, PVC, PMMA, KYDEX. Technical dat Working area dimension: 800×600 mm The dimension of the plate sheet: 860×660 mm Predpsiimw Aofx Adlsc Working table stroke: 290mm Thermoformed board thickness: 0,2 to 2 mm only the upper inrun heating Thermoformed board thickness: 3 to 5 mm additionaly lower inrun heating Power supply for the electric installation: 400V Heating power: *Upper inrun heating -12 kW *Lower inrun heating - 12 kW *Lower heating heating to maintain the temperature of the template - 2.4 kW Vacuum pump performance: 40 m3 oil Pressure in the chamber: ok.0,95-0,98 kg/cm2 Dimensions: width x depth x height: 1500 x 1600 x 1800 mm Weight: 600 kg Optionally, the machine can be configured according to the customer’s wishes: -increasing the dimensions of the working area, -demonstrative temperature measurement of the dome and material, -pneumatic clamp of frame -material cooling, -mobile control panel, -adaptation to work with a roll of foil, -reduction frame narrowing the working area. We produce vacuum machines. Chceck our vebsite for more. We ship worldwide.

Condition: used, Year of construction: 2006, functionality: fully functional, total width: 1,900 mm, total height: 1,800 mm, total length: 2,500 mm, briquette diameter: 80 mm, overall weight: 2,400 kg, type of input current: three-phase, oil tank capacity: 600 l, – after technical inspection – Italian production – year of production 2006 – DTR TECHNICAL PARAMETERS: Psdpov T Uphsfx Adljrc – briquette Ø: 80 mm – max. briquette length: 80 mm – efficiency: 350 kg/h – engine power: 27.5 kW – hydraulic crush: 1400 kg/cm2 – max. operating force: 150 bar – oil capacity: 600 l – container diameter: Ø 1200 mm – container height: 90 cm – dimensions (length/width/height): 2500 x 1900 x 1800mm – net weight: 2400 kg

Condition: excellent (used), A) Furniture Carcasse (Case) Continous Press Clamp (with CNC) "LIGMATECH" Mod. MDE 110/28/08 - Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) - Adjustable feeding speed m/min 12-40 - CNC Power Control 22 T - Total installed power Kw 14 - Total length of the machine mm 6220 Prjdpfx Adolkbn Ieloc Machine ables to process furniture cabinets (corpus) with dimensions: - Min/Max Length (Min/Max): mm 250 /2800 - Min/Max Depth - Width (Min/Max): mm 120 /800 - Min/Max Height (Min/Max): mm 280 /1320 B) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000) C) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000)

Condition: like new (used), • condition - used, after inspection • manufacturer - ORMA • model - C4 • shelves measuring 250 x 120 cm • max. clearance between shelves 490 mm • shelves straight, clean, without dents/damage • 4 pistons with a diameter of 55 mm Prjdpfxjwlwr Ie Adloc • max. pressure 150 bar • pump motor 1.1 kW • gluing time stopwatch • shelves heated with liquid • possibility of switching on and checking the device on site

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Pneumatic press for edge-gluing wood panels. Predpsyivr Hsfx Adlsc TECHFA type PTD 6000 Max. dimensions of glued elements: - length: 6300 mm - width: 160 mm - height: 850 mm Press is divided into 4 sections.

Condition: excellent (used), Through-feed System (of the furniture cabinets) Electro-mechanical pressing system Self-centering system Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) mm 4500 Adjustable feeding speed (m/min ) 10-40 Total lenght of the Press Clamp (mm) 4400 approx Electronic programmer PLC «OMRON» Total installed power (Kw) 8,8 approx Prjdpfeyzh I Ssx Adlec With in-feed conveyor (motorized belt) With out-feed conveyor (motorized belt) SIZE of FURNITURE CABINETS: Minimum lenght of the furniture cabinet (mm) 250 Maximum lenght of the furniture cabinet (mm) 2500 Minimum depth (Width) of the furniture cabinet (mm) 250 Maximum depth (Width) of the furniture cabinet (mm) 700 Minimun height of the furniture cabinet (mm) 250 Maximum height of the furniture cabinet (mm) 1200

Condition: new, Taylor 6/2.5m Clamp Carrier System For Solid Wood Edge / Face Laminating. Pedpfx Adjdy Dtrsljrc A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating, the Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a pneumatic clamp tightener / loosener, pneumatic component flattener and air motor drive for rotation. On request the machine can be specified with a working width of 3.1m and also with 12 working sections. 2.5m (8.5ft wide) 6 section frame. 36 x 302 type clamp arms with 90mm (3.5") high jaws and 1015mm (40") max. opening. (6 clamps per section). 1 x 80U type swing style pneumatic clamp tightener and component flattener with push button operation. 1 x 80AA pneumatic motor drive rotation. Front rest - manually operated. Pneumatic joy stick control for rotation / forward reverse. CE safety perimeter guards to sides / rear

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Equipped with: 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws Pjdjru Evgjpfx Adlorc - 2 x 80S heavy duty hydraulic drives for rotation - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener - Pneumatic movement in / out of front rest - CE safety perimeter guards Year - 2006 CE