Used mounting technology for sale (159)

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, empty load weight: 600 kg, bar diameter (max.): 120 mm, bar length: 1,600 mm, TECHNICAL DETAILS Bar length: 130 – 1,600 mm Crelhcoxxlzzjdw Aek Bar diameter: 6 – 120 mm MACHINE DETAILS Machine weight: 600 kg Required space: 2.5 × 2.0 × 1.9 m

Year of construction: 2017, operating hours: 157 h, condition: used, functionality: fully functional, machine/vehicle number: 0000014/21, Essemtec pick-and-place machine paraquda.g2 with dual head Cjljw U Dpqshcdw Ajrk Accessories: 8x 8mm double high-speed feeder; 10x 12mm high-speed feeder; 6x 16mm high-speed feeder 3x 16/24mm high-speed feeder; 2x 32/44mm high-speed feeder; 3x 8mm 10-lane feeder 1x 8/12mm 8-lane feeder

Year of construction: 2004, condition: good (used), functionality: fully functional, machine/vehicle number: 2340-F / 04071226482, Dimensions: System 7mx2mx2m; handling can be disassembled into smaller units of 2mx1mx1m Celhox Adx Hocdw Asrk Weight: System approx. 1 ton; other handling components each 100kg Equipment: incl. Asys solder frame handling with lift and ejector - Power connections: 400V; compressed air 6 bar; nitrogen 6 bar - Interfaces: Smema for handling; exhaust air 200mm - Working area: according to Seho original - Drives: according to Seho original equipment - Control: according to Seho original equipment - Miscellaneous: Full tunnel system with nitrogen

Year of construction: 2010, condition: ready for operation (used), Offered are 2 fully automatic stand-alone stencil printers for SMD assembly technology, PCB assembly year 2010. Fully automatic vision system, Linux-based operating software, double loading system, motorized table drive, large printing area X/Y 440mm/440mm, frame size X/Y max. 670mm/700mm, PCB thickness max. 6mm, cycle time approx. 18-25 sec., product changeover time < 5 min., squeegee pressure 4-24kg programmable, snap-off/separation speed programmable, compressed air supply 6bar approx. 60l/min., dimensions X/Y/Z 2080mm/1130mm/1450mm, signal tower 2000mm, weight approx. 285kg. Inspection possible by appointment. Crelhcdsxzt Dpow Aek

Condition: used, Year of construction: 2015, Vitronics Soltec myReflow 7038 SMD reflow soldering oven Year of construction 2015 Pin length: 5 mm Pin spacing: 19 mm 10 heating zones 4 cooling zones Crolhcdwouhfm Ue Aok N2 pressure: 6 bar LP width: 50 mm - 508 mm Max. component height: 40 mm / 30 mm (top / bottom) Transport height: 832 - 914 mm Width adjustment: electrical Software version: 4.0.6.b

Year of construction: 2006, condition: good (used), functionality: fully functional, Without solder Nitrogen hood IR preheating Single soldering nozzle 3 solder frames Software, etc., manual Tool, spare parts box Crolsxzrflehcdw Ask New timing belt, new impeller for drive installed

Condition: like new (used), Year of construction: 2024, operating hours: 2,000 h, functionality: fully functional, Date of manufacture: 01.12.2024 Working hours: approx. 2,000 Crolhcdsxgt Sdow Aok Condition: like new, excellent working state Price: €13,000 + VAT Placement capacity: up to 16,000 components/hour Chip sizes: from 0201 up to 45x45 mm Laser centering: contactless “on-the-fly” + vision alignment Feeders: 64 slots Feeder positions: compatible with 8 mm / 12 mm / 16 mm tapes, as well as IC trays PCB working area: up to 1,200 x 350 mm Placement heads: 8 nozzles Software: intuitive control + CAD data import supported Additional features: Dual vision system for precise component centering Automatic fiducial recognition Low maintenance, energy-efficient design High reliability and repeatability in production

Year of construction: 2016, condition: used, Ask for additional information! Crjlhcdoxy Sphjw Aok

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: DSPL-2025-Q2-01, overall weight: 150 kg, input voltage: 400 V, input current: 10 A, type of input current: AC, warranty duration: 12 months, total length: 1,560 mm, total width: 780 mm, total height: 950 mm, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, DS-Place – the compact all-in-one pick-and-place solution The DS-Place is a ready-to-use complete solution for automated parts handling. It combines robot, camera, PLC, conveyor system, and material hopper in one compact system – without lengthy integration. ✅ Fast & precise: Up to 1,200 parts per hour are reliably detected, picked, and transferred to the next station. Cjlhcjw Rm Hwjdw Asrk ✅ Flexible: Handles a wide variety of plastic or metal parts – gently and consistently. ✅ Simple: Set up, connect, and start – no separate interface programming or complex coordination required. ✅ Industrial-grade: Built with proven components from leading manufacturers (Epson, Keyence, Siemens, Item, Vetter). With DS-Place you save time, reduce error sources, and increase process reliability. Ideal for companies that want to automate quickly without setting up a complex project. 👉 Contact us now for more information or a non-binding offer. Keywords: Pick-and-Place – Sorting system – Robot cell – Feeding – Conveying – Parts handling – Automation – Robot handling – Sorting – Positioning – Handling.

Year of construction: 2019, condition: ready for operation (used), Software: OptiCon Pilot 5.1, with documentation, camera and lighting module, 3x repair work place software for defect visualisation and 4GB RAM computer, was last maintained in 2013. Crslhcdjxzq H Uow Aek

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, JUKI KE 3020, 3010, 3010 production line or standalone machines with electric feeders. KE-3010XL Year of manufacture: 2014 Longboard option Vision camera KE-3010AL Longboard option Year of manufacture: 2017 KE-3020R 2016 Longboard option Vision / Fine Pitch camera Cjlhsu Hrc Ajcdw Aork Including nozzles and accessories Including electric feeders (EF) 93 x 8mmS 26 x 12mm 21 x 16mm 9 x 24mm 5 x 32mm 2 x 44mm 1 x 56mm 1 x 72mm 1 x DTS 1 x tray holder 10 x feeder trolley Very good condition with maintenance history

Year of construction: 2014, condition: good (used), EKRA Stencil Printer Serio 4000 Year of manufacture: 2014 Print format: min. 80x50 mm, max. 510x510 mm Substrate thickness: 0.2 to 6 mm Stencil size: min. 450x450 mm, max. 800x900 mm Repeat accuracy: +/-12.5 µm IQUESS steel squeegee 2 1/2 D inspection Adjustable transport width iPAG jet dispenser (with heating) Solder paste dispenser for cup diameter 53 mm, 57 mm, and 64 mm Paste level control Crjlhexxk Elecdw Ajk EKRA Material Storage System S10 Select Year of manufacture: 2018 Consumables such as solder paste and adhesives can be stored according to product requirements and production options Traceability Temperature control (4-12°C) 8 shelves Material dispensing via lift system Handheld scanner

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 18,000 h, The machine is in very good condition, 5 years old, with approximately 18,000 operating hours. Regularly serviced, fully functional, and immediately ready for production. Technical specifications: Number of 8 mm feeders: 46 units (20 front, 26 rear) Supported feeders: 8 / 12 / 16 / 24 / 32 mm, vibration feeders Placement heads: 4 units Placement accuracy: ±0.01 mm Drives: Panasonic servo motors + ball screw + linear X/Y axes Vision system: synchronous recognition on 4 heads Operating modes: manual, semi-automatic, automatic Maximum placement speed: 8,000 cph Typical placement speed: 4,000–5,000 cph Maximum Z-axis travel: 20 mm Maximum PCB size: 480 × 300 mm Supported components: from 0402 up to 45 × 45 mm, LED, QFP, BGA with pitch ≥ 0.3 mm Maximum component height (Z): 5.5 mm Monitor: 15″ Operating system: Windows 7 Programming: data conversion, step-by-step, visual Power supply: 1 phase, 230 V, 50 Hz, 750 W Air pressure: 5–6 bar Machine dimensions: 1095 × 1165 × 1400 mm Weight: 450 kg Quick coupling: Ø 10 mm Cslhcdwew Rd Urj Asrk

Year of construction: 2013, condition: used, Working machine and 2 units available total. Located in the EU. Ask for additional information. Celjxy Sl Ashcdw Ajrk

Year of construction: 2012, condition: excellent (used), Our Asys TRM 03 transport system is for sale. Year of manufacture: 2012. Condition: good. The system is in very good condition, only the protective film on the control unit is loose in one spot (can be glued). Crslhcsxwtrfjdw Ask

Condition: like new (used), Year of construction: 2007, operating hours: 300 h, functionality: fully functional, machine/vehicle number: PSW-L, Used in very good condition, only 300 operating hours, 3 pallets included, documentation included Cslhcou A Ddwedw Aork

Condition: used, Various JUKI KE 20XX pick-and-place machines with feeders and accessories! JUKI FX-3L Year 2010 KE2080E with Tray TR6DER Year 2013 KE2080L Year 2010 KE2070E Crjlhjxzqldecdw Aek Year 2013 KE2080L with TR6 MTC Year 2007 KE2070L Year 2007 and 2008 KE2060RL + MTS tray Year 2007 KE2050RL Year 2010 Around 1000 mechanical feeders type CF/FF from 8mm to 72mm. Additional feeder trolleys, nozzles, spare parts. Sale possible as single machines or complete production line. Extra sale of feeders and trolleys – please inquire!

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018-0865A01, Push-down stacker - handling device for electronic circuit boards. Circuit boards arrive individually at the top and are stacked on top of each other at the bottom. Suitable for circuit board manufacturers or after individual PCBs have been marked in order to then bring stacks into the assembly line. Handling device for El. PCB / Circuitboards. Sequentially arriving PCB will be stacked on top of each other Machine can be used to stack PCB after manufacturing them or to stack PCB after Marking them for input into the SMD-placement lines ----- Please tell us your offer price. Crolsvamnvohcdw Aek Only sold within Europe, including Turkey ----- For technical data, see handout. Without packaging; any warranty is excluded. If you want to dismantle the system yourself, please include the relevant information in your bid. We accept no liability for the accuracy of the technical data, for the completeness of accessories and tools, or for compliance with all safety and environmental protection requirements specified in the accident prevention regulations.

Condition: good (used), functionality: fully functional, Year of construction: 2014, Frame size min. 450x450 mm Frame size max. 740x740 mm Print area min. 80x50 mm Print area max. 508x508 mm Repeat accuracy: +/- 12.5 µm Celhcdexwa Dhsw Asrk

Condition: used, Year of construction: 2013, Ask for additional information! Located in EU. Crelhoxy R Rwjcdw Aok

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 3002014, empty load weight: 2,500 kg, maximum load weight: 2,500 kg, overall weight: 3,000 kg, Year of construction: 2014, Offer Top condition 11.11.2025 1. 1x Eco Compact 20, year of manufacture: 2014 Crelhsxvyh Decdw Aok 2. 1x Quick-Point holder for the machine 3. 20 pcs. central clamps, 77 steel version, Art. No.: 46160 Complete ex works, free from third-party rights, €47,000 net

Condition: good (used), functionality: fully functional, Year of construction: 2015, CO2 laser Marking field 105x105 mm Marking area 460x460 mm Code size 5 mil Scan after print Side clamping PCB support Crolhcdoxv Tdxsw Aek

Year of construction: 2016, condition: used, Machine operational condition. Colexy R Dqshcdw Ajrk Additional machines available from 2015 to 2016. Baseline specs as seen on pictures. Ask for additional details and quotation! Machine located within EU.

Condition: good (used), functionality: fully functional, The following Asys handling systems are for sale: Asys LSB 03 Destacker (line start), year of manufacture 2018; Asys Inline 180° Flip Station WS 01, year of manufacture 2018; Asys PS 08 PCB buffer, year of manufacture 07/2011; Asys PS 10 PCB buffer, year of manufacture 2017; Asys PS 30 PCB buffer, year of manufacture 2018; Asys TRM 02 transport module, year of manufacture 2014; Asys TRM 03 transport module, year of manufacture 2018; Asys TRM 01 transport module, year of manufacture 2013; Asys BFS 01 Inverter Station, year of manufacture 2012; Asys BUL 01 PCB unloader station, year of manufacture 2012; Asys MPS 50 buffer station with cooling fan, year of manufacture 10/2008. Crelhcsxv Smfodw Ajk

Condition: used, Year of construction: 2010, Operational condition and with three Docking cart with movable feeder base. Crelhcsxvx Ucodw Ask Ask for additional information! Located in EU!