Used gantry milling machines for sale (149)

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,150 mm, travel distance Y-axis: 1,850 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 24 m/min, spindle speed (max.): 24,000 rpm, torque: 87 Nm, Fidia C20 CNC WORKING AREA X-axis longitudinal travel: mm 3,150 Y-axis transverse travel: mm 1,850 Z-axis vertical travel: mm 1,000 MAX AXIS SPEEDS X, Y axis feed rate: m/min 30 Z axis feed rate: m/min 24 WORK TABLE Clamping surface: mm 3,000 x 1,600 Maximum permissible load: kg/m² 5,000 T-slots: • Longitudinal 8 H12 + 1 H8 • Width mm 22 • Pitch mm 160 ELECTROSPINDLE Maximum power (S6 60%): kW 55 Spindle speed range: rpm 240 ÷ 24,000 Constant power range: rpm 6,000 ÷ 24,000 Maximum torque: Nm 87.5 Tool holder: HSK-A63 C-axis travel: ± 200° C-axis speed: °/min 2,000 C-axis offset from spindle axis: mm 75 A-axis travel: +95° / -110° A-axis speed: °/min 2,000 Max distance spindle nose – table surface: mm 1,175 Ljdpfx Aieyw Tddjijrn Machine equipped with: • 24-position tool magazine • Remote electronic handwheel • HMS system for head calibration • Various equipment included with the machine • User and maintenance manual and CE declaration of conformity

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 4480, total length: 14,500 mm, total width: 7,800 mm, total height: 3,500 mm, overall weight: 20,000 kg, Reichenbacher Machining Center VISION III-TT-L – 5-Axis, 3-Axis, MBG8, 5x SNA Equipment: 5-Axis Unit with Cardanically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 3-Axis Unit with Vertically Mounted Spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed freely programmable from 0 – 24,000 rpm, in 1 rpm increments Clockwise/counterclockwise rotation selectable via program Driven by frequency inverter Maintenance-free Water-cooled Hybrid bearings Automatic spindle stop in case of emergency stop Orientated stop for thread cutting Tool holder: HSK-F63 hollow shaft taper according to DIN 69893-6 Max. tool length usable from spindle nose: 240 mm Max. tool weight: 6 kg 8-Spindle Drilling Unit (1 unit): L-Shape, Grotefeld Drill spindles: individually selectable Rotation direction: clockwise/counterclockwise Pitch: 32 mm Power: 2.5 kW Speed: 5,000 rpm fixed Z-axis stroke: +75 mm Holder: D = 10 mm H7 Plunge stroke: 80 mm Grooving Unit (5 units): GROTEFELD Angle Saw Unit F100-S The working/milling stroke is pneumatic. Drive: three-phase motor with multi-ribbed belt LEFT version Lrsdpfxeywzq Se Aiijn Drive rotation direction: clockwise/counterclockwise Speed reduction: 1:2.86 – belt drive Power: 2.20 kW – 220-240/380-415 V – 50 Hz Speed: n1 = 2,800 rpm, n2 = 8,011 rpm at 50 Hz Spindle power: 2.2 kW Feed: 150 mm Tool holder: Ø30 x 1.5 mm – 5.0 mm Tool holder rotation: opposite to drive rotation direction Feed force: 2565 N Underfloor Drilling Unit in Machine Bed (1 unit): GROTEFELD Angle Milling Head G06-1.1-P The working/drilling stroke is pneumatic. Drive motor: 1.1 kW 220-240/380-415 V 50-100 Hz Drive rotation direction: clockwise Speed reduction: 1:1.55 gear drive Drive speed: 2,800 – 5,600 rpm Tool spindle speed: 4,340 – 8,680 rpm Tool holder: 1x HI-Q/ERM25 DIN6499-C (8°) For ER25 collet DIN 6499-B Ø0.5–16 mm max. Tool holder rotation direction: clockwise Flange clamping piece: FK45 Feed slide: with pneumatic cylinder and double steel guideways Feed: 80 mm

Condition: used, x-travel 6500/13150 mm y-travel 4000 mm z-travel 1250 mm w-travel 2250 mm control Sinumerik 840 D table surface area 5500/12150 x 3000 mm distance between columns 3500 mm max. distance between table and spindle-nose 3000 mm max. workpiece weight 70000 / 105000 kg ram head dimension 480 x 510 mm spindle turning speed - stepless 6,3 - 4000 U/min Lrsdpfxswa Dx Rj Aiijn milling spindle motor 63 kW max. torque on the spindle 3300 Nm tool taper DIN 39871 AD ISO 50 feed speeds X/Y/Z= 24000 mm/min total power requirement 120 kVA weight of the machine ca. 245 t dimensions of the machine ca. 29 x 7,7 x 8,1 m The Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro! Equipment/accessories: - automatic tool magazine for 153 tools - automatic milling head magazine for 6 milling heads - machining modules/ milling heads: 1. machining module -straight - straight long - 2. machining module -standard angle - 4000 rpm, 144 x 2.5°, ISO 50 3. machining module -narrow angle extended -40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 4. machining module -universal index - 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5° , B-axis +/- 44 x 2.5°, ISO 50 - coolant unit - chip conveyor - technical documentation

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, table length: 4,500 mm, table width: 2,500 mm, spindle speed (max.): 22,000 rpm, CNC Heidenhain iTNC 640 WORKING AREA: Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE: Dimensions: mm 4.500 x 2.500 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE: Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. Ljdpfxoyv In Ie Aiiorn C-axis rotation range: ± 270° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Constant power range: rpm 3.000 to 18.000 Constant torque range: rpm 10 to 3.000 Tool interface: HSK-A63 DIN 69893 ELECTROSPINDLE HSK-A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM Spindle power (S1/S6): kW 37/43 Spindle torque (S1/S6): Nm 140/165 Maximum spindle speed: rpm 15.000 Constant power range: rpm 2.500 to 12.000 Constant torque range: rpm 10 to 2.500 Tool interface: HSK-A100 DIN 69893 CHAIN TOOL MAGAZINE – 55 POSITIONS, HSK-A100 / HSK-A63 Floor-mounted fixed chain magazine located at the rear of the machine, fully enclosed for operator protection, equipped with a vertical tool change arm and automatic tool pre-selection. Fixed-pocket management system. Hydraulic axis locking Total tools: No. 55 HSK-A63 tools (DIN 69893): Number of tools: No. 30 Max tool diameter: mm 90 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 300 Max tool weight: kg 10 HSK-A100 tools (DIN 69893): Number of tools: No. 25 Max tool diameter: mm 100 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 450 Max tool weight: kg 20 REQUIRED CONNECTIONS Maximum installed power: kVA 177 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • High-pressure water and air through the spindle • Semi-automatic electrospindle change system with HSK-A63 and HSK-A100 interfaces • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 2259, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,900 mm, rotational speed (max.): 24,000 rpm, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Ljdpfx Asyv A Dkeiiorn Travel X-axis: 6,000 mm Travel Y-axis: 3,500 mm Travel Z-axis: 1,900 mm B-axis: +/- 110° C-axis: 360° Spindle speed: 24,000 rpm Spindle taper: HSK 63 Spindle motor: 25 kW Table size: 6,000 mm x 2,500 mm (hole pattern 22H7 / M16) Feedrate X + Y: 30,000 mm/min Feedrate Z: 28,000 mm/min Rapid traverse: 30,000 mm/min MACHINE DETAILS Control: Siemens 840D Tool changer: 40 tools EQUIPMENT Spindle: Fischer (type MFWS 1709/30, 2 units) Milling head: Forest Line (type: fork head, B-axis swivels +/- 110°, C-axis rotates 360°) Richter chip conveyor (scraper conveyor) Blum tool measurement Parking station for milling head (2 units)

Condition: good (used), Year of construction: 1997, Manufacturer: Line Type: Seramill 240 Control: NUM 750 Lredpfx Aioyf A H Neien Travel X: 6000 mm Travel Y: 2500 mm Travel Z: 950 mm Column spacing: 2400 mm Table: 6000 x 2100 mm Automatic milling head: 2.5° Spindle speed: 3200 rpm Feed rate: 10 m/min Machine weight: approx. 35 tons

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 12 m/min, total length: 11,000 mm, table length: 4,500 mm, table width: 1,250 mm, total width: 4,645 mm, spindle speed (max.): 3,000 rpm, total height: 4,170 mm, workpiece weight (max.): 10,000 kg, rotational speed (max.): 5,000 rpm, overall weight: 30,500 kg, Nicolás Correa FP40-40S gantry milling machine, refurbished model, is a high-precision solution designed for demanding industrial applications. With a large table size of 4,500 × 1,250 mm and 8 T-slots, it allows efficient machining of large workpieces. The travels on the X, Y and Z axes are 4,000 mm, 2,500 mm and 1,000 mm respectively. Equipped with an automatic UAG head and ISO 50 (DIN 69871) spindle taper, this milling machine provides flexibility and ease of operation for complex machining tasks. The machine offers a speed range up to 5,000 mm and a rapid feed of 15,000 mm/min, significantly improving productivity. The 30 kW head power ensures robust and consistent performance during extended operations. Lrjdpfx Aeul S Sysiion The Nicolás Correa FP40-40S supports a maximum table load of 10,000 kg, making it suitable for large and heavy workpieces. Carefully maintained and refurbished, this machine is an excellent option for companies looking for Correa reliability and precision at a competitive cost.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 650 mm, total length: 6,500 mm, table length: 2,000 mm, table width: 1,000 mm, total width: 3,600 mm, spindle speed (max.): 12,000 rpm, total height: 4,000 mm, overall weight: 14,000 kg, Equipment: rotational speed infinitely variable, The NICOLÁS CORREA EURO 2000 milling machine is a pre-owned machine that offers reliable performance for a wide range of industrial applications. Equipped with a HEIDENHAIN TNC 530 CNC control, this model ensures precise and efficient operation. Its working table measures 2,000 × 1,000 mm, providing a spacious and versatile working area. Lrsdpfxeul Txzj Aiisn The machine travels are 2,000 mm on the X axis, 1,250 mm on the Y axis, and 650 mm on the Z axis, offering sufficient capacity for complex machining tasks. The distance between columns is 1,250 mm, contributing to a robust and stable structure. The HSK 63 head with electrospindle reaches speeds of up to 12,000 rpm, enabling high-precision machining across a variety of materials. In addition, the milling machine features full enclosure guarding, improving operator safety while reducing noise and dust during operation. This used but well-maintained machine is an excellent option for companies looking to increase their production capacity without compromising quality.

Condition: used, Technical details: x-travel: 6500/13150 mm y-travel: 4000 mm z-travel: 1250 mm w-axis: 2250 mm table surface area: 5500/12150 x 3000 mm max. workpiece weight: 70.000/105.000 kg ram head dimension: 480 x 510 mm milling spindle motor: 63 kW max. torque on the spindle: 3300 Nm tool taper: DIN 39871 AD ISO 50 milling head speed: 6,3 - 4000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. distance between columns: 3500 mm passage: 3000 mm Ledpfxswc A Shj Aiiern total power requirement: 120 kW weight of the machine ca.: 245 t dimensions of the machine ca.: 29,0 x 7,7 x 8,1 m The machine is in mint condition and was generally overhauled in 2020! with CNC SIEMENS 840 D autom. tool magazine for 153 tool stations autom. milling head magazine for 6 heads milling heads - straight - straight extended length - milling head -angular head standard - 4000 rpm, 144 x 2,5°, ISO 50 milling head -angular small extended length -40 kW, 4000 rpm, 1800 Nm, 144 x 2,5°, ISO 50 milling head -universal index - 40 kW, 4000 rpm, 2100 Nm, C-axis 144 x 2,5° , B-axis +/- 44 x 2,5°, ISO 50 coolant attachment, chip conveyor *

Condition: used, Year of construction: 1974, x-travel 9700 mm y-travel 3500 mm z-travel 640 mm w-axis 3000 mm Control Siemens type 840D PL spindle diameter 200 mm Spindle capacity 85 Kw surface area 9000x2800 mm Table load 40000 kg column daylight 3400 mm high speed spindle taper ISO 50 weight of the machine ca. 193,8 t dimensions of the machine ca. 22,4x10,2x8,2 m Retrofit 2009 Steep taper ISO 60 DIN 2079 Speed ??12-450 rpm Ledjyq Sxljpfx Aiiorn Milling heads: 1x WF 680/450 1x WFU 180/350 1x WFU 70/300 1x 550 mm extension for WFKs The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Year of construction: 2020, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 5645, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, total length: 6,550 mm, table length: 2,500 mm, table width: 2,500 mm, total width: 15,900 mm, spindle speed (max.): 4,000 rpm, total height: 11,500 mm, overall weight: 57,000 kg, working range: 2,500 mm, grinding spindle motor power: 46,000 W, Ladies and Gentlemen, Lodpfottri Tex Aiiorn Enclosed we advertise our portal bed milling machine. Installation winter 2019/2020. 12,000 operating hours. Price on request. The machine is currently still in operation. The price is for the machine only. Dismantling, transportation and installation are the responsibility of the buyer. We are looking forward to serious inquiries. Many thanks in advance.

Condition: used, Year of construction: 1994, x-travel 7000 mm y-travel 3500 mm z-travel 1000 mm serial number 14908 control Siemens Sinumerik 880 2 Stück work table 3000x2500 mm spindle power 42 kW turning speeds max. 4000 U/min Tool changer 128-fach tool taper SK50 surface area 6800x2500 mm column daylight 3200 mm table load 20 t Accessories and cabinets can be purchased optionally The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Lrsdpfxoyqvqle Aiisn apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1971, x-travel 13000 mm y-travel 2750 mm z-travel 3000 mm turning speeds 600 U/min spindle taper ISO 50 Lredpfxsyqvl Aj Aiion milling head 4 No. 11137 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1991, x-travel 6200 mm y-travel 1500 mm z-travel 508 mm Control Mazatrol type M 32 Ledoyqvdropfx Aiijrn workpiece height 708 mm Tool changer 60 spindle taper ISO 50 table surface area 6200x750 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1986, x-travel 5300 mm y-travel 3300 mm z-travel 1300 mm Table load 50000 kg column daylight 2600 mm workpiece height max. 1700 mm Lrjdpfx Aoyqtm Rsiion Table dimensions 5000x2000 mm control Heidenhain type ITNC530 Maschine wurde überholt machine is retofit The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), travel distance X-axis: 11,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,250 mm, total length: 25,200 mm, table length: 10,000 mm, table width: 4,500 mm, total width: 11,200 mm, total height: 5,500 mm, table load: 30,000 kg, distance table center to spindle nose: 1,500 mm, WALDRICH COBURG MULTITECH 3500 FT GANTRY TYPE, MOVING CROSSRAIL MILLING MACHINE Equipped with Siemens Sinumerik 840 D CNC control. WORKTABLES (No. 2): - Mounting width: 3,000 mm - Mounting length, front table: 4,500 mm - Mounting length, rear table: 4,500 mm - Mounting length, tables coupled: 10,000 mm - T-slots, longitudinal: 28 mm / H8 - T-slot spacing: 250 mm - Max. load, front table: 20,000 kg - Max. load, rear table: 20,000 kg - Max. load, tables coupled: 30,000 kg - Distance between columns: 3,500 mm - Clearance between table and spindle nose (vertical spindle unit VS 125 C/150): 1,500 mm TRAVELS: - Table, longitudinal (X-axis): - Table 1: 5,000 mm - Table 2: 5,000 mm - Coupled: 11,000 mm - Milling/drilling unit, horizontal (Y-axis): 4,500 mm - Vertical spindle slide (Z-axis): 1,250 mm - Crossrail (W-axis): 1,000 mm MILLING/DRILLING UNIT TYPE M4: - Drive power: 45 kW - Spindle speeds: - I range: 5 - 1,300 rpm - II range: 40 - 6,000 rpm - Automatic indexing of horizontal spindle units from 1° to 1° over 0–360° AUTOMATIC TOOL AND ATTACHMENT CHANGER SYSTEM ROBOT: - Double gripper for tool change on vertical and horizontal spindle units - Double gripper for attachment change on milling/drilling unit - Tool holder flange diameter: 97.5 - 125 mm Lrodpfx Aoydmkvjiien - Max. tool weight: 50 kg - Max. attachment weight: 750 kg SHELF STORAGE SYSTEM: - Number of shelves: 4 - Total tool stations: 192 - Total attachment stations: 4 - Tool holders according to DIN 69871 ISO 50 - Station-to-station distance: 140 mm - Max. tool diameter with full occupancy: 135 mm - Max. tool diameter: - Standard: 250 mm - Direct access with shuttle trolley: 315 mm - Max. tool length: - Standard: 375 mm - In top row of the magazine: 600 mm OVERALL DIMENSIONS: - Total machine length: 25,200 mm - Total machine width: 11,200 mm - Total machine height from floor: 5,500 mm COMPLETE WITH: - 1x vertical spindle ISO 50, length 300 mm - 1x vertical spindle ISO 50, length 450 mm - 2x 90° heads - Workpiece inspection with Renishaw probe USED MACHINE

Condition: ready for operation (used), Year of construction: 2004, operating hours: 42,832 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 760 mm, controller model: FANUC SERIES 18i MB, clearance between the columns: 2,300 mm, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 2,100 mm Travel Z-axis: 760 mm Distance between columns: 2,300 mm Table size: 3,020 mm × 2,010 mm Maximum table load: 10,000 kg Lsdpfsymxi Aex Aiijrn Spindle taper: ISO-50 Standard spindle speed: 6,000 rpm Max. tool diameter / with empty magazine slot: 127 mm / 215 mm Max. tool length: 350 mm Max. tool weight: 20 kg Tool changer capacity: 32 tools Rapid traverse (X-axis): 20,000 mm/min Rapid traverse (Y-axis): 15,000 mm/min Rapid traverse (Z-axis): 15,000 mm/min Feed rate: approx. 1 – 10,000 mm/min MACHINE DETAILS CNC control: FANUC SERIES 18i MB Spindle motor power (continuous / 30 min): approx. 22 / 26 kW Operating hours, feed time: 42,832 h Operating hours, automatic mode: 53,246 h EQUIPMENT Automatic head changer (with angular milling head) RENISHAW probe

Condition: good (used), Year of construction: 2010, functionality: fully functional, Unisign Uniport 6000 Year of manufacture: 2010 / Commissioned: 2011 Control: Siemens 840 D Travel ranges: X = 10,000 mm, Y = 1,500 mm Enlarged spindle ram stroke: Z = 1,000 mm Enlarged clearance height: 1,000 mm Clearance width: 1,500 mm Lsdpfx Ajymb Eajiiern Main drive: 36 kW, n = 6,000 rpm, 720 Nm 2-speed gearbox, 1:4 Taper: SK 50 Machining capacity in C45: - Solid drilling D=120mm - Tapping M55 - Milling 100 cm³/min Gantry design with traversing portal bridge and stationary clamping table. Clamping table equipped with transverse clamping beams at 750 mm intervals; standard plate sections eliminated. Hydraulic clamping device with clamping bridges for axle machining, including hydraulic unit Angle drilling and milling head, n = 4,000 rpm, SK 50 High accuracy and stability thanks to Hirth coupling Automatic tool change into the angle head Measuring probe RWP20.50-M Pendulum operation Safety fence with light curtains, Sick brand Clamping table with transverse clamping beams at 750 mm spacing Tool chain magazine on portal column with 30 stations Machine cooling unit Water-air heat exchanger integrated in the control cabinet Unisign remote diagnostics for Siemens Sinumerik 840 D Makrolon curtains on both sides of the portal bridge, motorized height adjustment Partition wall with viewing window Chip conveyor with hinged belt design Mounting and alignment elements included

Condition: like new (used), Year of construction: 2017, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,200 mm, table length: 3,500 mm, table width: 1,750 mm, spindle speed (min.): 24,000 rpm, Heidenhain iTNC 530 control Main spindle HSK-A 63 Speeds: 1-24,000 rpm Tool changer for 50 tools Through-spindle cooling 5-axis milling machine with simultaneous milling head (Gabelkopf) Ledpfjw S T Iqox Aiiorn

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm Lrsdpfxswwq Hcs Aiien A-axis: ± 115° C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk

Condition: excellent (used), Year of construction: 2012, First commissioned: 2012 Control: Heidenhain iTNC 530 including handwheel HR 420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis milling head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 min-1 Torque: 48 Nm Tool holder: HSK 63A Lsdevy A Tnepfx Aiiern Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y axis: up to 50 m/min Feed speed Z-axis: up to 30 m/min Axis acceleration X-, Y-, Z-axis: up to 2.5 m/s2 Connection data Connection power: 190 kVa Back-up fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Additional equipment - Coolant supply with belt filter system - 30-way chain tool changer - Work area cover - Chip conveyor, right side Optional for an additional charge: - BLUM laser Condition of the machine Fully functional, very good condition. Already dismantled and stored.

Condition: new, Year of construction: 2025, machine/vehicle number: 306, First commissioning: 2024 Control: Heidenhain TNC 640 including handwheel HR 520 X-axis: approx. 4,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,300 mm A-axis: ± 120° C-axis: ± 360° Clamping table Clamping surface: approx. 4,000 x 2,500 x 213 mm Aluminum with T-slots across every 250mm Max load: 1000kg distributed over the entire surface 2-axis milling head HS673 Spindle power: 22 kW Spindle speed: max. 24,000 min-1 Torque: 18 Nm Tool holder: HSK 63A Tool clamping: pneumatic Blowing air / MMS: outside Linear axis drives Feed rate X and Y axis: up to 60 m/min Lodpfx Asvy Dugsiiorn Feed rate Z axis: up to 40 m/min Color Housing, portal, control cabinet: light gray Z slider and milling head: orange Additional equipment - Work area cover - 16-way tool changer - Control in a separate, rollable desk Optional for an additional charge: - Blum laser tool measurement - Renishaw RMP60 radio probe - Heidenhain remote diagnosis Images show identical machine with slightly different equipment!

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Lsdewywciepfx Aiiorn Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min surface area 2500 x 4500 mm 48 St. Lrsdpfxeu I E Emo Aiijn tool taper SK50 daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t required space 16,8 x 10,3 x 7,9 m

Condition: used, Year of construction: 1965, Dimensions (L/W/H) 10460,0 × 5715,0 × 5537 mm Ledpouh E Tbjfx Aiijrn spindle head adjustment horizontal 3160 mm spindle head adjustment vertikal 1000 mm hobbing length 2250 mm weight of the machine ca. ca. 76660 kg t