Used Doosan 300 for sale (313)

Condition: good (used), Year of construction: 2006, 1 used CNC lathe Manufacturer: Doosan Model: Puma 300 MSB Year of manufacture: 2006 Control unit: Fanuc 18i TB Kodpfxox Tayws Ad Njwt Max. swing diameter: 590 mm Max. machining diameter: 355 mm Turning length: 583 mm Chuck diameter: 250 mm Travel X-axis: 650 mm Z-axis: 680 mm Max. bar capacity main spindle: 76 mm Main spindle max. speed: 3,500 rpm Main spindle motor power: 22 kW Turret Number of tools: 12 Feed X-axis travel range: 240 mm Machine dimensions Length: 3,700 mm Width: 1,900 mm Weight: 6 t Equipped with: Subspindle diameter: 170 mm Power: 7.5 kW Passage: 52 mm Driven tools

Condition: used, Year of construction: 2001, Daewoo Puma V300 CNC Lathe Fanuc 18 – T Vertical lathe Daewoo PUMA V300 Year of installation: 2001 Kitagawa chuck, diameter 305 mm Max. swing diameter over bed: 550 mm Max. turning diameter: 410 mm Ksdpfxjyahy Ds Ad Njwt Max. turning height: 420 mm Spindle speed: 2,500 rpm AC motor power (cont./30 min.): 18.5 kW Turret with 8 tools Drilling diameter: 50 mm Tool section: 25 mm Control: Fanuc Series 18-T Equipped with chip conveyor Complete with documentation

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station Kedjx Sw E Ijpfx Ad Nowt - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: used, DAEWOO PUMA 300 LB (Doosan) 2-axis CNC lathe CNC Fanuc 18T Hydraulic tailstock Condition: very good. This machine can be inspected in our warehouse, under power. Mimu machine tools Italy Kodpfx Adjqfm A As Njwt

Condition: ready for operation (used), Year of construction: 2020, operating hours: 3,300 h, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1050 mm Y-AXIS TRAVEL: 900 mm Z-AXIS TRAVEL: 1000 mm DISTANCE SPINDLE NOSE-TABLE: 100 - 1100 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 10000 rpm; 25-45 kW; 600 Nm; ISO 50 - BT PALLET: N.2 ; CONTINUOUS ; 630x630 mm Kwjdpfxoxvfuvo Ad Nst MAX ADMITTED LOAD: 1500 Kg MAX MACHINABLE PIECE DIMENSIONS: ø1050 x 1350 mm TOOL MAGAZINE: CHAIN-TYPE ; 90 POS CONTROL UNIT: FANUC 31i WEIGHT: 18000 Kg OVERALL DIMENSIONS: 6520 x 3930 x 3495 mm ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER

Condition: used, Year of construction: 2011, operating hours: 10,650 h, Year of manufacture: 2011 Kwjdpfx Adox Hgr Ho Net Empty weight: 18.890 kg Dimensions (LxBxH): 810 x 292 x 347 cm Digging depth: 7.533 m

Condition: used, Year of construction: 2020, operating hours: 7,800 h, CE mark: yes Please contact ATS Norway for more information Please provide reference number upon request: 21289   Specifications: • 2020 model• 7800 hours• S70 quick coupler• Width: 349 cm• KW: 202• Weight: 29,400 kg• Rototilt R8• Grapple• Previously on a gold service contract. Now on a standard service contract• Makin 3D GPS• Includes a 1600-liter grading bucket (bucket in picture not included)• Good undercarriage (see pictures)• Includes spike guard• High and wide undercarriage• Large light package• App-controlled Webasto heater• One operator• Central lubrication on both machine and tilt• Extra hydraulics• 360 camera Description: 2020 Doosan 300LC-7 for sale on behalf of customer.The machine appears to be in very good condition and well maintained. Sold with a lot of extra equipment such as R8 Rototilt, grapple, Makin 3D GPS, high and wide undercarriage, large light package, and app-controlled Webasto heater.Ready to go straight to work for the new owner. Hours: 7800 Own weight: 29400 Total Weight: 29400 Width: 349 Kw: 202 CE: Yes Engine hours: 7608 Model: DX-300LC7 - HDHW - GPS - Kwjdpfxjxdhxae Ad Nst

Condition: used, Year of construction: 2017, operating hours: 5,019 h, Serial number: dwgceceakh103xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21771 Spesifikasjoner. 2017 modell  Sertifisert til: 10/26  5019 timer  Vekt: 31800 kg  202 kW Maskin bredde: 320 cm  Understell (se bilder)  Beltestyringer  Pusseskuffe  Engcon rototilt ec233  Sentralsmøring  Ekstra hydraulikk  S70 feste  Lys pakke  Klima/ac  Radio  Leveringsklar    Beskrivelse:  Vi har en 2017 Doosan Dx300lc-5 Gravemaskin m/ rototilt og pusseskuffe for salg.  Det kan følge med Makin 3D gps om ønskelig mot et tillegg i prisen.  Maskinen har gått på serviceavtale og har full servicehistorikk. Alt skal fungere som det skal ifølge eier.  Leveringsklar  Hours: 5019 Own weight: 31800 Year controlled: Yes Year controlled until: 10/26 Kwodpoxvlfhjfx Ad Njt Width: 320 Kw: 202 Model: Dx300lc-5 Gravemaskin m/ rototilt og pusseskuffe

Condition: used, Year of construction: 2011, operating hours: 6,682 h, 2011 | Doosan DX300LC | Used Tracked Excavator | 6682 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 52500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 62 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good general condition of the excavator for its age. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39626 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Kodpfsx I Nngox Ad Nswt ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2014, spindle speed (min.): 2,500 rpm, Year of manufacture: 2014 Chuck diameter: 10" Number of axes: 3 Kwedox N A Ebopfx Ad Net Swing over bed: 250 mm Spindle speed (rpm): 2500 Machinable materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Derlin, Peek

Condition: used, Year of construction: 2017, operating hours: 7,830 h, Year of manufacture: 2017 Ksdpfxex Hgtwj Ad Nowt

Condition: used, color: other, Year of construction: 2019, operating hours: 3,256 h, Power internal combustion engine: 270 HP (199 kW) GVW: 31.860 kg Make of engine: Doosan CE mark: yes Serial number: 0020852 Kedpfewakc Ajx Ad Newt Machines for Sale Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly. We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,599 h, functionality: fully functional, machine/vehicle number: MM0018-000095, turning length: 1,540 mm, turning diameter: 760 mm, spindle bore: 86 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 1,585 mm, TECHNICAL DETAILS Turning diameter: 760 mm Turning length: 1,540 mm Travel X-axis: 630 x 220 mm Travel Z-axis: 1,585 x 1,515 mm Travel Y-axis: 230 mm Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1,000 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 10,000 rpm Tool changer: 80 positions Turret: 12 positions Tool holder: BMT 65 P, Capto milling head Drive power: 26/22 kW MACHINE DETAILS Total connected load: 100 kVA Dimensions & Weight Footprint: approx. 6.1 x 2.7 x 3.0 m Machine weight: approx. 15.5 t Operating hours Spindle hours: 7,599 h Run time: 47,684 h Power-on time (control): 85,381 h EQUIPMENT Sub spindle 80-position tool magazine Hydraulically actuated hollow clamping device 12-position lower turret with BMT 65 P Chuck air blow-off system spindle 1 and spindle 2 Automatic central lubrication Contour milling with B-axis incl. 4-axis simultaneous machining Internal coolant supply on sub spindle Automatic tool measuring arm Electronic tool breakage monitoring 2-pressure clamping for main and sub spindle Automatic shutdown after end of production Hinged belt chip conveyor 2 x power chucks 250 mm Kwedox Updnepfx Ad Not 1 x radial AGW 1 x axial AGW Measuring probe Extended high-pressure coolant system with paper belt filtration Note: For transportation, two Mega Liner semi-trailers with 3 m loading height will be required.

Condition: used, Year of construction: 2007, Multipallet Horizontal CNC Center Doosan HC500, year 2007. 7-pallet pallet system Fanuc 21i-MB control Spindle speed 8000 rpm ISO40 (BT) taper -X850mm -Y700mm Kwedpfxjycvpfj Ad Not -Z750mm 1-degree pallet indexing 60 tools Chip conveyor Through-spindle coolant (IKZ) Machine fully operational, available for inspection in France, 01360 Loyettes.

Condition: used, fuel type: diesel, color: orange, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,550 h, Year of manufacture: 2015 Kjdpfx Ajx Hgn Ued Nowt Field of application: Construction Empty weight: 6.000 kg Dimensions (LxBxH): 567 x 198 x 255 cm Engine type: Yanmar Yanmar 4TNV94L

Condition: excellent (used), Year of construction: 2019, CNC Lathe 2-Axis Doosan Puma GT2600 Year of manufacture: 2019 Control: Fanuc i Series with Manual Guide Max. turning diameter: 460 mm Kwedpfx Aeycgpcsd Njt Max. turning length: 658 mm Spindle speed (belt drive): 3,500 rpm Spindle bore: 81 mm SMW Autoblok chuck 250 mm Axis travel: - Z axis: 680 mm - X axis: 265 mm 12-position tool turret Tailstock Renishaw tool probe - chip conveyor with tank and pump - documentation - tool holders Operating hours: 2,700 hours Very good condition

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET Kedpfxjq Nqkxs Ad Njwt X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: used, Year of construction: 2019, x-travel 900 mm y-travel 550 mm z-travel 500 mm Control FANUC 31i-b tool change unit 30 pos. table-size 1.000 x 500 mm table weight 700 Kg spindle taper HSK - A 63 number of spindle speeds 20.000 U/min/rpm Kwedpfx Adjx Ak E Hs Net Spindle power 22 Kw Working hours 10.816 h Spindle hours 2.352 h Distance between table and spindle 150/690 mm weight of the machine ca. 9 t dimensions of the machine ca. 2.530 x 2.900 x 3.064 m

Condition: used, Year of construction: 2006, turning diameter 320 mm turning length 322 mm control Fanuc D -iT greates pass round over bed 510 mm x-axis 175 mm z-axis 330 mm spindle tunring speed 6.000 U/min spindle drive 15 kW number of tool places 12 Pos. auto power on hours ca. 43.947 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Kodpfx Adoya Ih Is Newt Technical features & accessories: - Chip conveyor - Manual tailstock - Tool setter arm - Parts catcher with collection box Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 770 mm, spindle motor power: 18,500 W, controller manufacturer: FANUC, controller model: 31i-MODEL B, number of axes: 9, This 9-axis DOOSAN PUMA TT 1800 SY was manufactured in 2014, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT 1800 SY machine we have for sale. Contact us for more information. Additional equipment • LNS bar interface • the robot is not included Machine Benefits Qualitative Machine Benefits • Part ejector + internal cooling for sub-spindle • Automatic electric tool measurement • Air conditioning in the electrical cabinet • Lns lamella-type chip conveyor • Auto door for robot application • Absolent air system mounted on the machine • 3 pcs driven tools radially • 4 pieces of m-l21590377d triple holders with v-offset, 2 pieces of m-l21590337e axial external holders, 2 pieces of m-l21590347d double holders (single l/h), 4 pieces of m-l21590367d double holders (external), 6 pieces of m-l21590317 single holders (external), 2 pieces of m-l21590387c single holders (external), and 6 pieces of m-l21590327b internal holders Kwedoyaqq Espfx Ad Not • 3 pcs hard jaws Technical Machine Benefits • Max turning diameter: 230 mm • Max turning length: 230 mm • Bar capacity: 65 mm • C1-c2 axis: 360, x2: 190 mm, z2: 720 mm • 2 x 12 position turrets, all positions driven (24/24 index) • Tool holder: bmt 55 p • Driven tools: 5. 5 kw, max: 5000 rpm • Coolant pump for main turret: 3. 7 kw, 14 mpa, 30 l/min • Coolant supply via sub-/right spindle • Belt-type oil skimmer, part ejector Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2011, axis stroke (X,Y,Z) 742 x 435 x 510 mm Number of spindle head vertical / St. Number of spindles head horizontal / St. The DOOSAN DNM 400 is a vertical CNC machining center designed for precise milling operations in metalworking. It is particularly suitable for small to medium-sized workpieces and offers a solid combination of performance, accuracy and reliability. All technical documents for the machine are available and included. Accessories included. Control: HEIDENHAIN iTNC 530 Travel ranges X-axis: 742 mm Y-axis: 435 mm Z-axis: 510 mm Rapid traverse Ksdpfowmxflsx Ad Njwt X-axis: 36 m/min Y-axis: 36 m/min Z-axis: 30 m/min Max. cutting feedrate: 1~15,000 mm/min Ball screw (Diameter × Lead) X-axis: 40 × P12 mm Y-axis: 40 × P12 mm Z-axis: 40 × P10 mm Accuracy Positioning accuracy: ±0.005 mm over the full stroke Repeatability: ±0.002 mm Table size: 920 × 435 mm Min./Max. spindle-to-table distance: 150~660 mm Max. table load: 600 kgf Table surface configuration: 4-125 × 15H8 Max. workpiece height: 465 mm

Condition: ready for operation (used), Year of construction: 2007, overall weight: 12,500 kg, This DOOSAN VT 900 was manufactured in 2007. It's a vertical turning machine featuring a CNC FANUC Oi-TC, a chuck diameter of 630 mm, and a conveyor. Weighing 12500 Kg, it also meets CE standards. Consider the opportunity to buy this DOOSAN VT 900 vertical turning machine. Contact us for more information. Machine Benefits Technical Machine Benefits Kodeyalm Uopfx Ad Njwt • Chuck diameter: 630 mm

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 6,000 rpm, travel distance X-axis: 170 mm, travel distance Z-axis: 510 mm, spindle motor power: 15,000 W, total height: 1,675 mm, overall weight: 3,100 kg, controller manufacturer: FANUC, number of axes: 2, This DOOSAN LYNX 200 LM turn-mill centre was manufactured in 2011. It features a swing over bed of 510 mm and a maximum turning diameter of 320 mm. The spindle supports a maximum speed of 6000 rpm, and the machine includes a 12-station turret with live tooling capabilities. Ideal for precision turning and milling operations. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Cutting feed rate: 1 to 5000 mm/min • Swing over bed: 510 mm • Swing over cross slide: 170 mm • Max turning diameter: 320 mm • Max turning length: 510 mm • Bar workpiece capacity: 65 mm • Turning tool size: 25 x 25 mm • Boring bar diameter: Ø40 mm • Live tooling max speed: 5000 rpm Extra Information Kwodpfxsyalive Ad Njt Machine still under power Dimensions Machine Depth 2410 mm

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, controller model: 31i CNC, total height: 3,760 mm, overall weight: 26,000 kg, spindle speed (max.): 6,000 rpm, tool weight: 30,000 g, number of axes: 4, This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine. Additional equipment • Belt-type oil skimmer • Triple light tower Kjdpeyair Uefx Ad Newt • Shower coolant • Through-spindle coolant 70 bar – 75 kW with cyclone filtration • Automatic shutdown • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 • Tool probe TS27R Machine Benefits Technical Machine Benefits • Equipped with fanuc 31i cnc control • B-axis: indexable by degree • Pallet size: 800 x 800 mm • Pallet centering device • Tool magazine: 60 tools type bt 50 • Max. Torque: 1732 n·m Extra Information Machine still under power Dimensions Machine Depth 8150 mm

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 5,000 rpm, spindle motor power: 3,700 W, total height: 1,730 mm, overall weight: 4,800 kg, number of axes: 5, This 5-axis DOOSAN PUMA 2000SY was manufactured in 2005, designed for precision in horizontal turning. Ideal for complex machining tasks, it offers robust performance and reliability. Consider the opportunity to buy this DOOSAN PUMA 2000SY horizontal turning machine. Contact us for more information about this machine. Additional equipment • LNS Quick Load Servo Bar Feeder Kjdpjyaip Hsfx Ad Njwt Machine Benefits Technical Machine Benefits • Max. Turning diameter: 330 mm • Distance between centers: 510 mm • Type: auto turret servo • Tooling size: 25 mm (bmt) • Presetter • Coolant pump (high pressure) Extra Information Machine still under power Dimensions Machine Depth 3118 mm