Used Long Planer for sale (7,560)

Year of construction: 2001, condition: excellent (used), vertical longitudinal feeder on pneumatics for planers and drills, after renovation, new electrics Ncsdpfxjvcac So Ad Nel

Condition: used, Year of construction: 2020, functionality: fully functional, Technical Details: Manufacturer: • MEYER PLANTTEC • PLANER Systemtechnik Model / Designation: Weighing System Ricon 603 Control Cabinet Type: 2005767 = P1 Power Supply: 400 VAC / 50 Hz Control Voltage: 24 VDC Maximum Fuse Capacity: 25 A Rated Current: 8 A Total Weight: 60 kg Serial Number: 2005767-1 Year of Manufacture: 2020 PST Drawing Number: 161-10-760-02 2. System Overview (Visible Components) 2.1 Structural Frame • Welded steel frame with grating work platform • Integrated drum support area • Mounted linear guide rails and table elements • Lower grating section for drainage or spill containment 2.2 Pump and Mixing Area Mounted on the left side: Nodjx Itr Nopfx Ad Nocl • Vertical, motor-driven pump assembly equipped with INVEOR motor controller • Pump inlet connected to a chemical container positioned on the system frame • Stainless steel piping connected to the valve block and dosing line 2.3 Valve and Drive Unit • Stainless steel valve block with flange connections • Pneumatic rotary actuator: AIR TORQUE Germany Type/Model: SC0050-AJZ Series: FGF-010-S-17 Pressure Range: max. 10 bar Torque Values: 29 Nm (min) / 60 Nm (max) Temperature Range: –40 °C to +180 °C Connections: 1/4" Certification: CE, ATEX (EX II 2 G Ex h IIC T6 Gb X / Ex h IIIC T85°C Db X) Year Code: 20138769

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm Ncedpfei Apuhex Ad Nol - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Nodpfeu Au I Tex Ad Njcl Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes.

Condition: good (used), In this offer you acquire a used longbow feeder "Canon BDT VX 370". Item for sale: 1 x Canon BDT VX370 suitable for: Canon imagePRESS C10000VP Canon imagePRESS C8000VP Ricoh Pro C7100 Serie Ricoh Pro C9100 Serie Ncjdjl Axtgspfx Ad Nel Condition: This is a used unit and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The unit has been tested for function Packing and shipping: You are welcome to view the unit during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available upon request! Before shipment or collection, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

Condition: used, Capacity: 80 m/min Planer feed table, tested. At speeds up to 80 m/min. Nsdpfjg S Dm Nex Ad Nscl

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads Ncjdpfjl Dw Nxox Ad Nsl long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0179 (033), turning length: 125 mm, spindle speed (max.): 7,000 rpm, turning diameter: 32 mm, clamping diameter: 32 mm, workpiece length (max.): 150 mm, The machine is supplied with tool holders and spare parts. TECHNICAL DETAILS Swing diameter over bed: 32 mm Spindle bore: 32 mm Turning length: 125 mm Control: YASKAWA SIEMENS 840 DI V2 Spindle speeds: 7000 rpm Workpiece length: max. 150 mm Clamping diameter: 32 mm Feed rate: 0 - 2000 mm/min MACHINE DETAILS Machine weight: approx. 5.7 t Space requirements: approx. 10.5 x 2 x 1.9 m Connection voltage: 200 V, 3 phases Frequency: 50 / 60 Hz Connected load: 8.0 kVA Nedpjx U Tchefx Ad Njcl

Condition: used, Year of construction: 1997, Planing width: 630 mm, planing height: 250 mm, Tersa cutter block Z = 4, rubber infeed and outfeed rollers, electric table adjustment with digital display, drive motor: 7.5 kW, feed speed: 7 + 14 m/min, extraction port: 160 mm, dimensions: 1070 x 1200 x 1060 mm, weight: approx. 700 kg. Storage location: Nattheim. Ncsdpfsyc Uqhex Ad Nel

Condition: used, Weinig Unimat 22E planer and moulder for four-sided planing and profiling of wood, with a slotted bed for short and curved workpieces, a mobile spindle for varying widths, a set of machining tools, and a long planing table. Special price available ex-works. spindles: 6 spindle 1: Bottom (5.5 kW) spindle 2: Right (4 kW) spindle 3: Left (5.5 kW) spindle 4: Right (5.5 kW) spindle 5: Top (7.5 kW) spindle 6: Bottom (4 kW) Ncedpfx Aoyc Upqsd Nel Spindle speed: 6,000 rpm spindle diameter: 40 mm working width: 220 mm working height: 120 mm mobile spindle: Yes groove bed: Yes Groove bed: Yes feed: 5.5 kW / / 6-36 m/min

Condition: used, x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 10 m/min Nedevkit Aspfx Ad Necl creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C table load 50.000/100.000 kg drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and ls the drive of x-axis consists of one hydrostatic screw with hydrostatic rack

Condition: used, Year of construction: 1996, BMH four side moulder With all in- and outfeed conveyors - Year: 1996 - Documentation available: No Ncodpfx Aewniqbod Nsl - CE marking present: Yes - CE certificate present: No - Serial number: 95777 - Deals (actions): er deal - Voltage [V]: 380 - Power [kW]: 48.0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, Dimensions (LxBxH): 217 x 460 x 183 cm Price: On request - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107402 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle diameter [mm]: 40 - └ Spindle 2: - - Spindle diameter [mm]: 40 - └ Spindle 3: - - Spindle diameter [mm]: 40 - └ Spindle 4: Ncsdjwnig Nspfx Ad Nol - - Spindle diameter [mm]: 40 - Feed table length [mm]: 1780 - Feed motor [kW]: 5.2 - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 400 - Transport dimensions: 2170mm x 4600mm x 1830mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, Empty weight: 5.000 kg Dimensions (LxBxH): 450 x 200 x 180 cm Price: On request Four-sided planer Weinig Unimat 23 Year of construction 1998 Serial number 82747 Feed speed 5/36 m/min Workpiece width min/max 20/230mm Workpiece height min/max 8/160mm Spindle diameter 40mm Half Groove Bed 1st spindle bottom: 7.5kW 2nd spindle right: 7.5kW 3rd spindle left: 7.5kW 4th spindle top: 7.5kW 5. Spindle bottom: 7.5kW 6. Spindle universal: 11kW Total power 55kW Total 119Amp Fuse 125Amp. Transport dimensions: 4500x2000x1800 (LxWxH) weight +/- 5000kg - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: 82747 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 Njdpfx Aownh D Tsd Nscl - - Spindle diameter [mm]: 40 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - └ Spindle 6: - - Spindle type: Universal - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - Min. planing width [mm]: 20 - Max. planing width [mm]: 230 - Min. planing height [mm]: 8 - Max. planing height [mm]: 160 - Feed speed: - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 36 - Current consumption [A]: 119 - Fuse [A]: 125 - Power [kW]: 55.0 - Transport dimensions: 4500mm x 2000mm x 1800mm (l x w x h) - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Feed table for a four-sided planer Njdohtq Amopfx Ad Necl TECHNICAL SPECIFICATIONS: max. workpiece length 5000 mm min. workpiece length 400 mm max. workpiece width 330 mm max. element thickness 120 mm roller motor power 1.1 kW 1.5 kW chain motor power adjustable feed on the inverter 7 guide chains 13 steel feed rollers roll diameter 90 mm height of the rollers from the base 820 mm pneumatic pressure height of the rollers from the base 820 mm dimensions (length / width / height) 600/240/155 cm weight ~ 1500 kg

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with portable hand control unit Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x Width x Height: approx. 4,500 x 2,000 x 400 mm Longitudinal T-slots 18H12 T-slot spacing 250 mm (Shown zero-point clamping plates and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Linear axis drives Feed rate X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 touch probe Nodpfjx Ifdkjx Ad Necl Condition of the machine Fully operational, machine is supplied without enclosure and must be enclosed by the purchaser in accordance with CE regulations.

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, rotational speed (min.): 1,500 rpm, rotational speed (max.): 9,000 rpm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1997 Control system: Heidenhain Working ranges X-axis approx. 3,000 mm Nodjx Iuguspfx Ad Nocl Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates shown and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Linear axes drives Feed speed X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Space required by machine (without control cabinet): approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is delivered without enclosure and must be enclosed in a CE-compliant manner by the buyer. Note: The tool changer, vacuum table including pump, and extraction unit can be purchased at an additional cost. However, they are NOT included as standard equipment with the machine!

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, Initial commissioning: 2005 Overhauled: 2022 Control system: SIEMENS SINUMERIK 840D PL Working area X-axis: 3,000 mm Y-axis: 2,500 mm Z-axis: 1,250 mm A-axis: +/- 100° C-axis: +/- 360° Hours Total machine hours: 110,000 h Total spindle hours: 60,000 h Current spindle hours: 1,900 h (new, February 2024) Clamping table Length x width: 3,000 x 2,500 mm T-slots: 18 H12 T-slot spacing: 250 mm Table load capacity: 5,000 kg/m² Installation: above floor Milling head VH6 Spindle power: 41 kW Spindle speed: max. 10,000 rpm Torque: approx. 200 Nm Tool holder: HSK 100A Axis clamping A & C: 3,000 Nm Drives linear axes Drive technology: linear motor Feed rate X/Y/Z-axis: 40–60 m/min Axis acceleration X/Y/Z: 3–5 m/s² Ncedpfx Aox Npmrsd Nsl Electrical specifications Voltage: 400 V Frequency: 50 Hz Dimensions & weight Machine space requirement: approx. 7,300 x 6,500 x 5,600 mm Total weight: 60 t Additional equipment - 1x chip conveyor, left - Video camera system for work area monitoring - 40 bar ICS coolant supply with belt filter system - 11 bar external coolant supply, face end - 30-position tool changer, expandable by 20 additional positions - Renishaw RMP60 / Renishaw touch probe - BLUM tool measurement and tool breakage control

Condition: used, Year of construction: 2017, x-travel 5850 mm y-travel 2500 mm z-travel 1000 mm Control 840D sl feeds x- + y-axis 20 m/min feeds z-axis 20 m/min acceleration 5 m/qs spindle drive - main spindle 60 kW spindle turning speed - stepless 24.000 U/min max. torque on the working spindle 87 Nm tool taper HSK-A63/F80 c-axis +/- 360 grad a- axis +/- 100 grad tool changer 20 stück coolant tank 2300 l surface area 6.000*2.500 mm number of T-slots 18 flute distance 125 mm dimensions of the machine ca. 14,8x7,3x5,8 m Machine table Width 2,500 mm Length 6,000 mm Number of T-slots 20 Distance of T-slots 125 mm Dimensions of T-slots 18H8 mm Max. table load 8,000 kg Travels Cross rail: X axis 5,850 mm Cross slide: Y axis, horizontal 2,500 mm Z axis, vertical 1,000 mm Feeds X-, Y- and Z-axes Feed rate 20 m/min Rapid traverse rate 45 m/min Acceleration 5 m/s² Vertical Slide Cross section 560x420 mm Motor spindle Drive power S1 (100% ED) 60 kW Max. speed 24,000 rpm Max. torque 87 Nm Tool interface HSK-A63/F80 C-axis Swivel range ±360 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm A-axis Swivel range ±100 degree Feed 50 min-1 Acceleration 50 rad/s² Nodpfxsycln Ds Ad Necl Holding torque 1,400 Nm Clamping torque 4,000 Nm Total dimensions Length 14,800 mm Width 7,300 mm Height 5,800 mm

Condition: excellent (used), Catalogue number 7797 TECHNICAL DATA - Shaft width: 510 mm - Number of knives: 3 pcs Ncodpfx Adeycikve Njl - Table length: 2520 mm - Brake - Cast iron tables - Both tables adjustable - Original angle-adjustable fence - Motor: 4 kW - Extraction port diameter: 160 mm - Dimensions (L/W/H): 2520x870x950 mm - Weight: 672 kg ADVANTAGES – Polish production – 3-knife cutterhead – Brake – Used jointer, in very good condition Net price: 7,500 PLN Net price: 1,790 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number: 7775 TECHNICAL DATA - Cutterblock width: 640 mm - Number of knives: 4 pcs - Maximum working thickness: 300 mm – From above: - Anti-kickback fingers - Toothed, pulling, swiveling infeed roller - Pressure bar - Planing cutterblock - Pressure bar - 2 smooth, pulling, rubber-coated outfeed rollers - Digital thickness display - Main motor: 5.5 kW - Electric table lift: 0.7 kW - Variable feed speed: 6–20 m/min - Feed motor: 1.1 kW - Dust extraction port diameter: 150 mm - Dimensions (L/W/H): 1000 x 1400 x 1200 mm - Weight: 950 kg ADVANTAGES – Italian manufacture Ncedpoycihbefx Ad Nsl – Electric thickness display – Electric table lifting – Used thickness planer in very good condition, complete with original technical documentation (DTR), CE marking Net price: 31,900 PLN Net price: 7,590 EUR based on 4.2 PLN/EUR (Prices may vary with exchange rates)

Condition: excellent (used), Catalogue number 7734 TECHNICAL DATA - Shaft width: 630mm - Max. thickness of workpiece: 230mm - 4-knife planing shaft * from above: - Anti-kickback fingers - Toothed feed roller - Pressure bar - Planing shaft - Pressure bar - 2 smooth, driven outfeed rollers * from below: - Adjustable roller in bottom table - Motor approx. 7.5kW - Stepless feed speed adjustment - Extraction port diameter: 145mm - Dimensions (LxWxH): 1250x1300x1300mm - Weight: 908kg ADVANTAGES – Italian manufacture – Very good condition – Used thickness planer Net price: 21,900 PLN Net price: 5,200 EUR based on 4.2 EUR exchange rate Ncjdpeycidvjfx Ad Nel (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7667 TECHNICAL DATA - Working width: 630mm - Number of knives: 4 pcs - Max thickness of processed element: 250mm - From above: - Kickbacks - Serrated, driven infeed roller - Pressure bars - Planing cutterhead - Kickbacks - Smooth, driven outfeed roller - From below: - Adjustable rollers in lower table: 2 pcs - Main motor: 7.5kW - Electric table lifting - Lifting motor: 1.5kW Nedpfeycicrsx Ad Necl - 3 feed speeds: 8/12.5/20m/min - Feed motor: 1.5kW - Extraction port diameter: 120mm - Dimensions (L/W/H): 1150x1200x1700mm - Weight: 1100kg ADVANTAGES – Polish production – Electric table lifting – Thickness planer, used, in very good condition Net price: 21,900 PLN Net price: 5,200 EUR (according to 4.2 EUR exchange rate) (Prices may vary in case of significant rate fluctuation)

Condition: used, Year of construction: 1998, Dimensions (LxBxH): 450 x 222 x 190 cm Price: On request - Year: 1998 - Documentation available: No - CE marking present: Yes Nsdpoxr U Nuofx Ad Necl - CE certificate present: No - Serial number: 83929 - Number of spindles [pcs.]: 5 - └ Spindle 1: - - Motor power [kW]: 7.5 - └ Spindle 3: - - Motor power [kW]: 11 - └ Spindle 4: - - Motor power [kW]: 11 - └ Spindle 5: - - Motor power [kW]: 7.5 - Transport dimensions: 4500mm x 2220mm x 1900mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, Empty weight: 1.500 kg Dimensions (LxBxH): 22 x 128 x 167 cm Four-sided planer Weinig Unimat 300 5 axis machine Year of construction 2007 Min/max working height 6/120mm Min/max working width 13/230mm Working speed 6/12 m/min Spindle speed 6000 Rpm Spindle diameter 40mm Input table length 2450mm Engines 1st spindle - Under 5.5kw 2nd/3rd Spindle - Link/Right 11kW 4th Spindle - Above 7.5kW 5th Spindle - Below 5,5kW Dimensions 4500x1300x1500mm (LxWxH), Weight 1500kg - Year: 2007 - Documentation available: No - CE certificate present: No - Transport dimensions: 222mm x 1280mm x 1670mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Ncodpfx Adowng Uqo Nel VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels