Used Double Column for sale (13,643)

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring Hnsdpfx Agjwva I Hs Isl - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation Hnjdpfx Agsdzp Tco Iel - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control system: Heidenhain TNC430 PA Working areas X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x Width x Height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates depicted as well as other clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Drives - Linear axes Feed rate X, Y, Z axis: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions and weights Space required (machine without control cabinet): approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional equipment - Tool changer Hnjdpjx Ifdkjfx Ag Iol - TT140 touch probe Condition of the machine Fully functional, machine without enclosure! The zero-point clamping plates and other accessories shown are not included in the scope of delivery!

Condition: used, Year of construction: 1994, pressure 600 t stroke 100 mm Hnedpfxsw U Ekps Ag Isl no. of strokes 45 /min distance between columns 580 mm dayligth 460 mm table surface area 550 x 620 mm ram surface 550 x 430 mm ram adjustment 50 mm power requirement 15,0 kW Weight 13,5 t dimensions (WxDxH) 1,5 x 2,45 x 2,75 m Nominal force travel 1.7 mm Nominal energy 10.2 kJ With knuckle-joint drive, flywheel brake, hydraulic clutch, press frame balancing, self-monitoring control system

Condition: used, Year of construction: 1997, Pressure 500 t distance between columns 1550 mm Hnsdjy Rutmspfx Ag Ijl stroke 600 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1200 x 1300 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 150 mm die cushion area 950 x 950 mm table height over floor 1245 mm side window 1250 mm ram surface 1200 x 1300 mm speed down 750 mm/s speed up 780 mm/s working speed 105 mm/s oil volume 4000 l power requirement 263,0 kW weight 45,0 t Dimensions (WxDxH) 3,3 x 3,3 x 6,1 m height over floor 6,1 m YOM 1978 - overhaul 1997 with oil-hydraulic drive, hydraulic drawing cushion in table, pneumatic ejector in ram (0,5 t), cutting impact cushioning with depth stop (motoric adjustable), mechanical ram interlocking in TDC as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1988, Pressure 315 t distance between columns 1350 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1200 x 1300 mm table height over floor 1245 mm side window 1250 mm ram surface 1200 x 1300 mm Hnedey Rutgepfx Ag Iel speed down 750 mm/s speed up 680 mm/s working speed 180 mm/s oil volume 2000 l power requirement 150,0 kW weight 35,0 t Dimensions (WxDxH) 3,3 x 3,3 x 5,5 m height over floor 5,5 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning with depth stop (motorized adjustment), hydraulic ram interlocking as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1988, pressure 160 t Hedpfxsy Ruq Ee Ag Ienl distance between columns 880 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 530 mm table surface area 830 x 1000 mm hole in the table 260 x 360 mm table height over floor - 850 mm side window 610 mm ram surface 830 x 1000 mm power requirement 55,0 kW weight 14,7 t Dimensions (WxDxH) 2,2 x 2,0 x 4,3 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in ram (50 t / 10 mm), hydraulic cutting impact cushioning, motoric adjustable depth stop, motoric adjustable table, two-hand operation No foundation pit necessary

Condition: used, pressure 160 t distance between columns 1360 mm stroke 300 mm Distance table/ram, max. stroke up, adjustment up 620 mm table surface area 1300 x 900 mm table height over floor 950 mm side window 640 mm ram surface 1300 x 900 mm power requirement 45,0 kW weight 16,0 t Dimensions (WxDxH) 2,5 x 2,1 x 4,1 m with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop No foundation pit necessary Hnedpfx Ajyx Im Njg Iel

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 1110 mm Hnedpfsyx Im Asx Ag Ijl stroke 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm Table surface area 1100 x 900 mm Table height above floor 950 mm Side window 690 mm Ram surface 1100 x 900 mm Oil volume 730 l Power capacity 56,0 kW Dimensions (WxDxH) 2,3 x 1,55 x 3,96 m with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, depth stop No foundation pit necessary

Condition: used, Year of construction: 1985, pressure 40 t distance between columns 495 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 490 x 400 mm hole in the table 50 mm table height over floor 950 mm side window 155 mm ram surface 150 mm speed down 480 mm/s speed up 480 mm/s working speed 20 mm/s oil volume 115 l power requirement 7,5 kW weight 2,2 t dimensions (WxDxH) 1,35 x 1,1 x 2,2 m Hedsyx Imvspfx Ag Ionl with oil-hydraulic drive, upper and lower stroke limitation, mechanical depth stop, two-hand and foot operation

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 1125 mm stroke 250 mm distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1100 x 900 mm pressure of drawing cushion in table 63 t stroke of drawing cushion in table 100 mm die cushion area 700 x 400 mm table height over floor 960 mm side window 700 mm Hsdpfjyx Il Esx Ag Isnl ram surface 1080 x 900 mm oil volume 1000 l power requirement 35,0 kW weight 23,0 t Dimensions (WxDxH) 2,5 x 2,3 x 4,5 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick), hydraulic drawing cushion in table, cutting impact cushioning No foundation pit necessary

Condition: used, Year of construction: 1984, pressure 200 t distance between columns 1800 mm stroke 710 mm Distance table/ram, max. stroke up, adjustment up 1100 mm table surface area 1600 x 1300 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 250 mm die cushion area 1400 x 1080 mm table height over floor 800 mm side window 800 mm ram surface 1660 x 1300 mm speed down 400 mm/s speed up 410 mm/s working speed 14,3 - 49,7 mm/s power requirement 38,0 + 13,0 kW weight 25,0 t Hedpfsyx Ilrox Ag Ienl Dimensions (WxDxH) 3,65 x 3,3 x 5,4 m height over floor 5,05 m height beneath floor 0,4 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic drawing cushion in table (controllable), hydraulic cutting impact cushioning (in side frame), mechanical depth stop (motoric adjustable), mechanical ram interlocking, two-hand operation

Condition: used, Year of construction: 1988, pressure 160 t Hsdpfx Agsyx Ilfs Ienl distance between columns 1600/1420 mm stroke 345 mm distance table/ram, max. stroke up, adjustment up 830 mm table surface area 1460 x 850 mm table height over floor 1100 mm side window 770 mm ram surface 1410 x 850 mm speed down 540 mm/s speed up 520 mm/s working speed 26 - 85 mm/s oil volume 2100 l power requirement 45,0 kW weight 23,0 t dimensions (WxDxH) 4,0 x 2,3 x 4,9 m with oil-hydraulic drive, ram interlocking

Condition: used, Year of construction: 1980, pressure 400 t distance between columns 3250 mm distance table/ram, max. stroke up, adjustment up 1000 mm stroke 800 mm table surface area 3250 x 1400 mm table height over floor 1250 mm die cushion capacity 170 t die cushion stroke 200 mm die cushion area 1800 x 1000 mm distance between cutting impact cushioning 2610 mm side window 800 mm ram surface 3250 x 1400 mm return capacity 51 t speed down 300 mm/s speed up 300 mm/s working speed 16 - 33 mm/s quantity of oil 2900 l power requirement 100,0 kW weight 70,0 t Hjdpsyx Ik Ujfx Ag Ijnl Dimensions (WxDxH) 4,9 x 3,1 x 7,6 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic drawing cushion in table (controllable), hydraulic cutting impact cushioning with motoric adjustable depth stop, hydraulic ram interlocking, two-hand operation as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck

Condition: used, Year of construction: 1991, pressure 400 t stroke 300 mm table surface area 1200 x 700 mm ram surface 1200 x 700 mm dayligth 500 mm adjustment of stroke 300 mm return capacity 348 kN capacity of ejector 100 kN ejector stroke 100 mm control SIEMENS Simatic S 5 total power requirement 65 kW weight of the machine ca. 28 t Hjdpjtqqlcefx Ag Isnl dimensions of machine L x W x H 4,4 x 2,75 x 4,0 m = hydr. punching and embossing press Accessories: tool changing table - with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 m

Condition: used, Year of construction: 1983, pressure 315 t distance between columns 1620 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1600 x 1100 mm pressure of drawing cushion in ram 20 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 300 x 300 mm side window 600 x 1100 mm table height over floor 750 mm ram surface 1600 x 1100 mm oil volume 1500 l power requirement 110,0 kW weight 35,0 t dimensions (WxDxH) 4,65 x 2,61 x 5,5 m height over floor 5,05 m height beneath floor 0,45 m Hedpfxsyx Ikho Ag Ijnl with oil-hydraulic drive, controllable dependent on pressure/time and way, NO drawing cushion in table, hydraulic drawing cushion in ram, hydraulic cutting impact cushioning, two-hand operation

Condition: used, Year of construction: 1993, Pressure 1500 t distance between columns 5050 mm Hodpfx Aevuucqeg Ionl stroke 1100 mm Distance table/ram, stroke up 2300 mm Table surface area 5000 x 2700 mm pressure of drawing cushion in table 320 t Die cushion stroke in table 300 mm Die cushion area in table 4300 x 1830 mm Die cushion pressure in ram 120 t Die cushion stroke in ram 200 mm Die cushion area in ram 3410 x 1650 mm Ram surface 5000 x 2400 mm Speed down 360 mm/s Speed up 168 - 505 mm/s Working speed 19 - 86 mm/s Oil volume 10500 l Power capacity 450,0 kW Weight 400,0 t Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m Height above floor 8,21 m Height below floor 4,0 m year of manufacture 1983 - overhaul 1993 with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning / stroke limitation (adjustment of the spindle approx. 500 mm, max. dampening force approx. 750 t, dampening stroke max. approx. 30 mm), controllabel dependant on pressure/time and way as is where is, WITHOUT dismantling, WITHOUT loading

Condition: used, Year of construction: 1985, pressure 320 t distance between columns 1530/1370 mm stroke 320 mm distance table/ram, stroke up 830 mm table surface area 1500 x 650 mm die cushion pressure in table 12,5 t table height over floor 1100 mm side window 570 mm ram surface 1240 x 650 mm Hodpfxjyx Ihto Ag Ienl capacity of ejector in table 12,5 t speed down 450 mm/s speed up 440 mm/s working speed 63,6 mm/s oil volume 2100 l power requirement 2 x 45,0 kW weight 27,0 t dimensions (WxDxH) 4,0 x 2,3 x 4,9 m with oil-hydraulic drive, hydraulic drawing cushion in table and ram, ram interlocking

Condition: used, Year of construction: 1988, pressure 160 t distance between columns 1340 mm stroke 300 mm Distance table/ram, max. stroke up, adjustment up 600 mm table surface area 1300 x 900 mm table height over floor 930 mm Hodpfx Ajyx Ihmjg Ionl side window 600 mm ram surface 1300 x 900 mm speed down 367 mm/s speed up 390 mm/s working speed 58 mm/s oil volume 800 l power requirement 30,0 kW weight 15,0 t Dimensions (WxDxH) 2,5 x 2,2 x 4,0 m with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic cutting impact cushioning, depth stop (motorized adjustment), two-hand operation No foundation pit necessary

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 1650 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1250 mm die cushion capacity 80 t die cushion stroke 300 mm die cushion area 1300 x 900 mm table height over floor 800 mm ram surface 1600 x 1250 mm oil volume 2000 l power capacity 43,0 kW weight 25,0 t Dimensions (WxDxH) 2,9 x 2,3 x 5,8 m height beneath floor 0,85 m Hnedpjxwdrvsfx Ag Isl SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1993, Pressure 250 t stroke 500 mm distance between columns 1650 mm side window 750 mm daylight 1200 mm table surface area 1650 x 1250 mm Hnedov Svb Aopfx Ag Iel die cushion capacity in table 80 t die cushion stroke in table 250 mm die cushion area in table 1070 x 780 mm table height over floor 850 mm ram surface 1650 x 1250 mm speed down 10 mm/s speed up 80 mm/s working speed 10 mm/s oil volume 400 l power requirement 22,0 kW Weight 21,5 t dimensions (WxDxH) 2,7 x 2,3 x 4,25 m height above floor 4,0 mm with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic drawing cushion in table, hydraulic cutting impact cushioning (4x Parallel holding cylinders), two-hand operation, hand lever operation

Condition: used, Year of construction: 2011, Pressure 200 t stroke 900 mm distance between columns 3520 mm Distance table/ram, max. stroke up, adjustment up 1400 mm Table surface area 3500 x 1600 mm Ram surface 3500 x 1600 mm Side window 1150 mm feed down 500 mm/s feed up 550 mm/s working feed 38 mm/s oil volume 2000 l power requirement 90,0 + 21,0 kW Weight 34,00 t Hnjdpsv Svbvjfx Ag Iol dimensions (WxDxH) 4,4 x 3,3 x 5,5 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back (cascading), hydraulic ram interlocking, operation with up to 4 operator's possible

Condition: used, Year of construction: 1999, Pressure 400 t stroke 800 mm distance between columns 2820 mm Side window 950 x 1100 mm distance table/ram (stroke up) 1600 mm table surface area 2800 x 1200 mm die cushion capacity in table 150 t die cushion stroke in table 200 mm die cushion area in table 2000 x 800 mm table height over floor 650 mm ram surface 2800 x 1200 mm speed down 420 mm/s Hsdev Sva Sjpfx Ag Ienl speed up 300 mm/s working speed 17,5 - 29,5 mm/s oil volume 2500 l power requirement 75,0 + 22,0 kW Weight 50,0 t dimensions (WxDxH) 4,1 x 2,8 x 7,2 m height over floor 6,15 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, hydraulic ram interlocking, two-hand and four-hand operation

Condition: used, Year of construction: 1987, pressure 2000 t distance between columns 975 mm stroke 400 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1015 x 1050 mm table height over floor 800 mm capacity of ejector in table 6,3 t ejector stroke in table 100 mm capacity of ejector in ram 65 t ejector stroke in ram 100 mm ram surface 975 x 1050 mm return capacity 150 t speed down 235 mm/s speed up 250 mm/s working speed 5 - 20 mm/s oil volume 4000 l height over floor 3,65 m height beneath floor 3,75 m power requirement 194,0 kW weight 105,0 t dimensions (WxDxH) 5,0 x 6,5 x 7,4 m Calibrating press with oil-hydraulic drive, hydraulic ejector in table and ram Hnjdpfx Ageyx Imps Iol

Condition: used, Year of construction: 1991, pressure 200 t distance between columns 1100 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1100 mm table surface area 1000 x 1000 mm pressure of drawing cushion in table 63 t stroke of drawing cushion in table 250 mm die cushion area 800 x 750 mm table height over floor 800 mm ram surface 1000 x 1000 mm Hodpfx Agsvzxqre Ijnl Speed down 400 mm/s speed up 250 mm/s working speed 22 - 56 mm/s power requirement 45,0 kW weight 24,0 t dimensions (WxDxH) 2,4 x 1,5 x 5,9 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ram interlocking, two-hand operation