Used Other metal presses for sale (161)

Condition: ready for operation (used), An older Promecam press brake is available. Pressing force: 100t, bending length: 4000mm, throat: 400mm, stroke: 100mm, installation height: 300mm, weight: approx. 8500kg. On-site inspection is possible. Iedpfxewr Dwwo Afijtn

Condition: used, Year of manufacture: 2002 Connection: 400 V, 200 A Power: 80 kW Clamping force: 4,000 kN Isdpfxswxv E To Afistn Net weight: 45 t Press dimensions: 3,500 x 2,400 x 3,900 mm (LxWxH) Including pictured accessories. The machine is located at the Schlotheim site and has not been dismantled. The price is quoted without dismantling and loading.

Condition: not inspected (used), fustellatrice Iedpjuau Sqsfx Afiotn

Year of construction: 2003, condition: good (used), Briquetting press for metallic waste, chips, dust Plant as new , used only for trial purposes Isdsfb T Eyjpfx Afistn

Condition: used, TECHNICAL DETAILS - Pressure : 2 - 125 [t] - Working speed : 0 - 7.6 [mm/sec] - Vertical rapid speed : 440 [mm/sec] - Compressor piston stroke : 0 - 130 [mm] - Upper extractor stroke : 15 [mm] - Passage between uprights : 404 / 104 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1500 x 1500 [mm] - Machine height : 2450 [mm] Iedpfow Ihtmox Afistn - Machine weight : 2300 [kg] MACHINE HOURS - Number of hours under power : 35271 [h] EQUIPMENT - CNC : Siemens - Oil mist extractor : Elbaron RON/A 100 SV

Condition: used, Year of construction: 2025, A universal arbor press made of high-quality cast iron. Products of this series provide great capabilities in one reliable and inexpensive device. Simple in handling in such processes as bushing, bending, straightening and reaming. Iedpfx Afsw Hxmcoietn Machine features For mounting and removing bearings, sleeves and pins High-quality cast iron Table adjustable in four positions Can be used in all workshops Technical data Pressing force 3 t Maximum workpiece height 285 mm Distance from piston axis to column surface 165 mm Table diameter 163 mm Arbor dimensions 38×38 mm Largest hole in the table 44 mm Height after arbor lowering 615 mm Base dimensions 455×300 mm Weight 65 kg NOTE: 100% COMPLETE, SIGNS OF CORROSION

Year of construction: 1998, condition: ready for operation (used), Two identical strip presses are available. Press force: 70t, stroke: 160mm, stroke rate: 112 strokes/min, stations: 4, strip dimensions X/Y: 308.3mm/978mm, connected load: 10kW, weight: approx. 10200kg. Documentation available. On-site inspection is possible. Ijdpfsv I Dcajx Afistn

Condition: used, Year of construction: 2018, functionality: fully functional, HPFS series are suitable for processing metal materials, such as stamping, bending, compressing and drawing metal sheet etc. It can also be used for straightening, pressing, plastic molding, balsa wood punching and sintered parts compacting. Nominal force 1000KN Max. working pressure of liquid 25Mpa Slider stroke 400mm Max. opening height 700mm Worktable size 1700 x 800mm Idle speed of slider 100mm/s Working speed od slider10-25mm/s Return speed of slider 30-80mm/s Height above floor 800mm Specification Unit Parameter Model No. HPHS-100T Nominal Pressure KN 1000 Return force KN 320 Slide Stroke mm 400 Max. Opening Height mm 700 Slider Speed: -Downstream speed mm/s 100 -Pressing mm/s 10-25 -Return mm/s 30-80 Table Size: -L.R. mm 1700 -F.B. mm 800 Overall dimensions: -L.R. mm 2300 Itsdoquqc Ispfx Afisn -F.B. mm 800 -Height above floor mm 3000 Servo motor Power KW 18.5 Voltage 400V, 50Hz, 3 Phase Total Weight app. T 12 Below attached drawing with tech. specification

Year of construction: 2001, condition: used, press capacity 148 to material Hartmetallstangen Itsdet Hw Snjpfx Afien quality Extrusionspressvorgang 0

Condition: like new (used), Karl Pfisterer, le principal fabricant de Electro-hydraulique. presses à balles Le sabot du câble me presse beaucoup d'accessoires. Tout était bien entretenu. Iodjd I Hffspfx Afiotn Accessoires voir liste. (Aucune garantie de complétude n'a été trouvée sporadiquement et tout était là)! Boîte en bois pratique. Pince de câble Plus d'articles - neufs et d'occasion - peuvent être trouvés dans notre magasin! Frais de port internationaux sur demande!

Condition: used, HORIZONTAL PRESS PRESSURE 80t Iodpfxeihvnme Afietn

Condition: good (used), Year of construction: 1971, functionality: fully functional, total height: 3,000 mm, pressing force: 30 t, overall weight: 4,500 kg, total width: 1,500 mm, total length: 2,000 mm, Overhaul 2005 Filling height 140 mm Strokes per minute 7.5 - 21.5 Top punch stroke 175 mm Top ram adjustment 115 mm Iodpfxsu Rn Hxs Afistn Top ram pre-spring 20 mm Total connected load 15 KW

Year of construction: 1982, condition: ready for operation (used), Stroke speed: 57-86/min, ram adjustment: 63mm, including documentation. Isdpfxsi Ati Nj Afijtn

Condition: excellent (used), Here we offer you a TOX press-in machine TOX-C-frame press. TOX Pressotechnik Press-in machine TOX-C-frame press Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Press type EMB 030.068.Α.001 Drive KWE3O.0O.17O.10H Pneumatic connection G3/4'' Compressed air preparation filtered and dried compressed air max. particle size 40 µm Air pressure working process Pmin. = 3,0 bar Рmах. = 6,0 bar Pressing force 170 kN Total stroke / scraper stroke 170 mm/ 10 mm Control STE 326-366-3/4"-90-230٧/АС special cpl. Electrical connection 90-230V/AC Ambient temperature operation Тmiп. = 10°C Tmax. = 60°C Tox press-in monitoring EPW 500FP Force / displacement measurement Holding-up device ZHE for Tox press Insertion dimensions: Width 1917.5 mm Height 2506 mm Depth 1917.5 mm Protective grid circuit Leuze B20/B21 Light curtain Press-in tool see (pictures 15 to 18) Press-in sleeve (Fig. 17) 24.5 ∅ mm Iedpfxjhhil Ts Afijtn Range of application, use Press-fit Weight: 2200 kg Type: EMB 030.068.A.001 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2003, condition: excellent (used), Press-in device for ceramic pins in rotor shafts Principle of operation: The ceramic pins are fed by means of an oscillating conveyor pot via a pneumatic hose to an inspection station in which the position of any one-sided hole is checked. This is done with an optical sensor. Incorrectly positioned parts are conveyed by a pneumatic slide into a collecting container. Pins in the correct position are fed through another pneumatic tube to the separator of the press-fit tool. The actual press-fit process is also performed pneumatically with a punch guided by a roller bearing. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too lightly into the shaft. A pressure p2, which is also manually adjustable, then presses the pin into the rotor shaft as far as it will go. A disk spring package preloaded with 5,000 N prevents excessive force from being exerted on the pin and shaft. The rotor shaft must be manually inserted into the die, removed and clamped by an operator. This process is safeguarded by a light curtain. Design Ijdpfsib H U Dox Afiotn Self-supporting station integrated in complete system for pressing in ceramic pins and balls. Rotor shafts Ø: 5 - 20 mm L: 50 - 200 mm Ceramic pin Ø: 3 mm L: 5 +/- 0,2 mm Working cycle Power: 15 strokes per minute Safety safety door with safety switch Category 4 light curtain Emergency off Airborne sound emission Continuous sound pressure at the workplace: 70 dB (A) Electrical connection Voltage: 230 V AC Frequency: 50 Hz Fuse. 10 A Compressed air connection Operating pressure: 5 - 7 bar Dimensions L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year 2003 Electrically height adjustable work table Documentation and wiring diagrams are available

Year of construction: 1967, condition: good (used), Conversion 2000 hydraulics and electrics, table 3600x400 Itedpfslml Drjx Afisn

Year of construction: 1995, condition: ready for operation (used), A Gebrüder Edelhoff punching machine is available. Pressing force: 80t, stroke adjustment: 20mm-80mm, ram adjustment: 100mm, stroke rate: 30-200/min, motor power: 15kW, weight: approx. 9500kg. Including reel AMT CA 300/R7-60. The machine occasionally has a problem with the speed, as it increases by itself. This is probably due to the wiring harness. An on-site inspection is possible. Iedpfx Afouhqcboistn

Condition: good (used), Year of construction: 1973, functionality: fully functional, overall weight: 4,500 kg, total length: 2,000 mm, total width: 1,500 mm, total height: 3,000 mm, power: 30 kW (40.79 HP), Overhaul in 2007 Itsdpfx Afju Rn S Ioijn Filling height 140 mm Strokes per minute 8.0 - 25.0 Top punch stroke 175 mm Upper punch adjustment 115 mm Top ram pre-spring 20 mm Total connected load 9 KW

Year of construction: 1996, condition: ready for operation (used), Pressing force: 1500kN, max. sheet thickness: 2.5mm (at 450N/mm²), max. tool dimensions X/Y: 350mm/650mm, max. tool weight: 270kg, working speed: 13mm/s, ram stroke: 500mm, weight: approx. 10800kg. Itsdpjtxbzxsfx Afien

Condition: ready for operation (used), Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps. Itedpet Amdrefx Afion

Year of construction: 1962, condition: ready for operation (used), A Kieserling double-column eccentric crank press is available. Pressing force: 140t, table dimensions X/Y: 630mm/710mm, opening diameter: 200mm, column width: 630mm, ram table distance: 435mm/560mm, stroke: 50mm-125mm, ejector stroke: 20mm, stroke rate: 50/min, ram adjustment: 70mm, ram dimensions X/Y: 500mm/425mm. Machine dimensions X/Y/Z: approx. 2000mm/1700mm/3600mm, weight: approx. 11000kg. Including one roller feed unit. Documentation available. On-site inspection is possible. Itodpfx Afewyxacjijn

Year of construction: 1995, condition: ready for operation (used), A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible. Iedowm Nn Repfx Afistn

Year of construction: 2000, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible. Itsdpfxsw N Shke Afien

Year of construction: 1989, condition: ready for operation (used), Drive power: 23kW, pressing force: 800kN, overrun distance: 25mm, overrun time: 93ms, safety distance: 148mm, oil capacity: 650l, weight: approx. 7000kg. Includes a Sick safety light curtain. An on-site inspection is possible. Isdpfxjw Na E Ro Afistn

Year of construction: 1993, condition: ready for operation (used), Two press brakes LVD are available. 1) Press brake LVD PPBL-H 100/40, year of manufacture: 1993, pressing force: 1000kN, working length: 4000mm, distance between uprights: 3150mm, ram stroke: 130mm, table-to-ram distance: 310mm, throat depth: 200mm, table width: 180mm, table-to-floor distance: 910mm, closing speed: 80mm/s, working speed: 8mm/s, return speed: 60mm/s, oil capacity: 120l, weight: approx. 8200kg. 2) Press brake LVD PPBL-H 165/40, year of manufacture: 1993, pressing force: 1650kN, working length: 4000mm, distance between uprights: 3150mm, ram stroke: 150mm, table-to-ram distance: 350mm, throat depth: 250mm, table width: 180mm, table-to-floor distance: 930mm, closing speed: 80mm/s, working speed: 7.5mm/s, return speed: 70mm/s, oil capacity: 150l, weight: approx. 10500kg. Documentation available. An on-site inspection is possible. Sale of individual units is possible. Iodpfx Afsw Na Hujijtn