Double-Column Hydraulic Press

Dieffenbacher DT II 320/120 SH/Z

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Technical Specifications: • Programmable control cutter, • Automatic straightener, • Sectional roller shear, • Labeling system, Iodpowi Twhsfx Adnsa • Outfeed conveyor, • Control panel, • Usable sheet width: 1270 mm, • Straightening rollers: 6 units, • Number of blades: 5 pairs, • Blade type: stainless steel.

Condition: not inspected (used), Year of construction: 2002, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, table width: 515 mm, table length: 640 mm, Wire EDM machine Chmer EDM Iodpfx Ajqgcimjdnoa Type: CD 305G X-path: 400 mm Y-path: 300 mm X-path: 220 mm bed: 515 x 640 mm Year of construction: 2002 Hours: 16333 Including documentation and parameters Dimensions: 245x200x203 cm LxWxH

Condition: used, Tool holder shaft type:HSK-A 100 Tool holder shaft type:Wohlhaupter Tool holder shaft type:Feindrehwerkzeuge Ausdrehkopf / Precision Turning Big selection of Wohlhaupter HSK-A 100 Tool holders / precision turning tools / adapters /extenders etc. for sale Sales list with prices upon request. Ijdpfxsg Nqlio Adnoa

Condition: used, Year of construction: 2018, pressure 800 t Ijdsw D Hkdepfx Adnea stroke 80 – 360 / 400 mm no. of strokes 3 – 60 /min distance between columns 4200 mm dayligth (stroke and adjustment up) 1400 mm column travel -side 1800 mm table surface area 4000 x 1800 mm hole in the table 3400 x 450 mm table height over floor 950 mm ram surface 4000 x 1700 mm ram adjustment 305 mm material width 800 mm material thickness 0,7 - 6,0 mm material cross-cut 2800 mm² power requirement 475,0 kW Weight 154,00 t dimensions of the machine ca. 6,05 x 3,95 x 7,7 mxmxm total height over floor 6,6 m Servo-Press (Press, Coil Line, Transfer) - Press Schuler, MSD 2-800-4.0x1.8-400 Servo - eccentric drive in transverse-shaft design via 2 torque motors, hydraulic overload protection, motorised ram adjustment, ram counterbalance, main control panel with TFT touch colour display motor-driven retractable change plate, hydraulic slide-in clamping elements - Coil Line Schuler-Automation AC-UEL-M-0800 / AC-SH-9-70/160-0800 R-L / AC-RM-EHP-0800 Transfer Schuler-Automation AT2-M-800-500-405

Condition: good (used), Year of construction: 2016, The machine can be inspected at our premises in Immendingen after consultation. Included is the original chip conveyor and a bar feeder from FMB 2-20 turbo Iodpfxsu Rmy Rs Adnsa Incl. Kraft and Bauer fire extinguishing system

Condition: used, Year of construction: 2000, grinding length 1600 mm Isdpfxot Hxcbj Adnoa grinding width 600 mm workpiece height 500 mm total power requirement 50 kW

Condition: used, functionality: fully functional, Brogtec METEOR homogenizer High performance colloid mill ATEX Colloid mill in pharmaceutical design, mobile on a stainless steel trolley. Electric cabinet on the trolley with speed control via frequency converter, on/off switch. Version with mechanical seal and sealing pressure vessel for pressure maintenance and cooling of the sealing medium in the sealing circuit of the mechanical seal. VAC/48-62 Hz, 400 V Brogtec METEOR High performance colloid mill - homogenizer ATEX Iedpfxsr Hquhs Adnea Colloid mill in pharmaceutical design mobile on a stainless steel trolley. Electrical cabinet on the trolley with speed control via frequency converter, on-off switch. Design with mechanical seal and barrier pressure vessel for pressure maintenance and cooling of the barrier medium in the sealing circuit of the mechanical seal. VAC/48-62 Hz, 400 V

Condition: used, Year of construction: 2010, functionality: fully functional, turning length: 300 mm, turning diameter over cross slide: 20 mm, turning diameter: 20 mm, spindle speed (min.): 10,000 rpm, spindle speed (max.): 10,000 rpm, spindle bore: 20 mm, rotational speed (max.): 10,000 rpm, power: 30 kW (40.79 HP), Turning and milling center complete with bar feeder LNS HYDROBAR MINI SPRINT bar loader(Maximum bar length 3,000mm) DMG MORI SPRINT 20-8 Control: Fanuc 310i Main spindle speed: 10.000 rpm Power: 5,5 kW torque: 14 Nm bar passage: max. 20 mm C1 axis: 0.001 travel Z1 axis: 80 mm Counter spindle speed: 10.000 rpm Isdpeq Nmm Ejfx Adnea power: 5,5 kW torque: 14 Nm C2 axis: 0.001 Travel X2 / Z2 axis: 240 / 300 mm rapid traverse in X2 / Z2 axis: 40 m/min Tool carrier I (X/Y) Technology: Linear slide Internal machining: 6 stations tool holder: 20 mm External machining: 6 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck, ESX 16 Travel in X/Y axis: 50/350 mm Rapid traverse in X/Y axis: 40/30 m/min Tool carrier II (Y) Technology: Linear slide internal machining: 4 stations tool holder: 20 mm External machining: 4 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck , ESX 16 Travel in Y2 axis: 120 mm rapid traverse in Y2 axis: 40 m/min MACHINE DETAILS weight: 4200 kg Connected load: 30 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Chip management: chip conveyor Coolant management: Coolant pump Fire extinguishing system: Kraft + Bauer Oil mist extraction: Interface prepared Further equipment: Signal lamp

Condition: new, Year of construction: 2023, ENERGY T20000 20.00 KVA/16 KW At 400V 20,00 KVA /// 16 KW At 230 V 16,00 KVA /// 12,8 KW 255 KG L= 970mm W= 680mm H= 955mm Giri/min - speed 3000 Frequency Hz 50 Voltage 230/400 V Amps 32.0A at 400V 70A at 230V GASOLINE (EURO V) Electric start engine power hp (KW) 32 (23,8) Cylinder 2 Cooling system air Protective measures Low oil level Speed governor mechanical Ijdpfx Aeipvhkednea Fuel consumption 75% of load Lt/h 9.8 Tank capacity Lt 65 Voltage control AVR Voltage accuracy % ± 1% * 2 CEE socket 32A 3pole 230V single phase * 1 CEE socket 32A 5pole 400V three phase * 1 12V DC * Voltage selector switch (400V three-phase or 230V single-phase) * LED multimeter: Voltmeter, amperometer, KWmeter, frequency meter and hour meter. Power unit stands on 2 sturdy wheels and 2 legs, and can be moved with them. The handles can be folded to save space. Emergency gensets of the ENERGY Thunder series are not suitable for continuous operation! However, an emergency supply can be established without any problems! ENERGY T20000 Full Service Kit € 78.00 incl. 20%. * Worldwide transport incl. unloading is possible for an additional charge * An invoice with VAT will be issued

Year of construction: 2018, condition: used, x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance between columns:1500 mm distance spindle center to table:225-925 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x 160 x 8 mm spindle taper:HSK-A 63 spindle speed:24000 U/min spindle drive:25/33 kW Spindle motor torque:72.6/95.8 N.m. Iedehx R Dvjpfx Adnja rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Tool changer:20 fach max. tool diameter:100/130 mm max. tool length:300 mm max. tool weight:8 kg total power requirement:80 kva Weight approx.:22 t Machine size (LxWxH):5660 x 5295 x 3930 mm CNC controller:Heidenhain TNC 620 spindle:IBAG electric spindle 24000rpm HSK-A63 Scales:Heidenhain automatic tool changer:20 fach chip conveyor - auger:2 Stk. Used portal milling machine with extensive accessories at a special introductory price. Important manufacturers of the components used in this storage machine are: Controllers and Servomotoren of Heidenhain, type TNC 620 Ball Screw Bearing - Japan Nsk X ball screw spindle Taiwan Hiwin Y Ball Bearing Taiwan Hiwin Z ball screw spindle Taiwan Hiwin 3 Axes Linear Guide - Japan Thk Or Germany Rexroth Electric screw unit - Hsk A63-24000rpm from IBAG Linear Encoder - Heidenhain Pneumatic System - Japan Smc Lubrication - Japan Showa Covers - Hema Air conditioning - Taiwan Kaokung Spindle water cooler - Taiwan point 3 axles Cable towing - Germany Igus Clutch - Germany KTR Company - Germany Mecano Relay - Omron Electricity - Germany Schneider MPG hand wheel - Japan Tosoku Further information on the machine, standard accessories and special accessories can be found in the appendix. Of course, we also gladly organize for you the delivery free house including assembly / commissioning and ready for handover as well as instruction