Used Table Press for sale (64,316)

Condition: good (used), Laenge: About 2430 mm Dsdpfx Aod Nmdfof Iscn Width: About 1520 mm Heithrange: About 540 mm

Condition: excellent (used), Year of construction: 2002, You are purchasing an ironing system Djdpou Nyu Sjfx Af Iscn Presse Vite ironing/steam table with 4 height-adjustable whirlpool hoods and 2 steam generators Working width approx. 340 cm, 9000W Year of manufacture 2002 223-380V Pr12LP Control unit GE VAT20 U20NOK7S Find more items in our shop!

Condition: used, 2 clamping plates, 1 pair of clamping bars with T-slots Clamping block, press table, auxiliary table with T-slots Length of each clamping bar: 900 mm Width of each clamping bar: 295 mm Thickness of each clamping bar: 130 mm - 6x T-slots, 30 mm - T-slot spacing: 150 mm - 6 holes Ø 18 mm (spacing 300 x 160 mm) Dcjdpfx Afjxf Uwls Isn - All faces machined Net weight per clamping bar: 240 kg Good condition

Condition: like new (used), 1 used press table in very good conditionDimensions: 500 x 380 mm Dcsdsd Tmfmepfx Af Ion

Condition: ready for operation (used), Year of construction: 1992, operating hours: 5,000 h, functionality: fully functional, total width: 1,400 mm, total length: 3,200 mm, total height: 2,900 mm, overall weight: 23,000 kg, temperature: 210 °C, pressing force: 200 t, operating temperature: 200 °C, workpiece height (max.): 150 mm, table width: 1,400 mm, table length: 3,200 mm, You can view the machine under power until mid-July 2025. For sale is an almost as-new veneer press with infeed/outfeed table from the German manufacturer Wemhöner, model KTV1E (serial number 1645, year of construction 1992). The machine is in excellent condition and has only low usage hours. Machine type: Throughfeed press Manufacturer: Wemhöner Type: KTV1E Serial number: 1645 Selecta Year of construction: 1992 Location: 57223 Kreuztal Available: immediately Technical data Dcedpfx Ajwnpcdjf Ijn Press length: 3200 mm Press width: 1400 mm Heating plates: yes Heating medium: oil Loading: yes Infeed belt: 3200 x 1900 mm Outfeed belt: 3200 x 1900 mm Press area: 3200 x 1450 mm Passage height: approx. 100 mm Feed temperature: 200° Thermal output: 45 kW Heating medium: oil Press force: 200 tons The press machine is in top condition, has had very low usage, and has been used exclusively for development projects for the past 15 years. I will gladly send you further information and pictures on request. The machine is immediately available and can be viewed by arrangement at any time. Pick-up only! Function video on request. If interested, I am happy to provide further information or arrange a viewing!

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 6513/19, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Djdswu Sg Espfx Af Ijcn

Condition: new, Year of construction: 2022, bending press 10 ton with welding table - motor 1 KW - 400 Volt 50 Hz 3 phase - with punch and die - bending high 150 mm - with welding table - 1000 x 1000 mm Djdpfjpz Hztox Af Iocn - moveable on wheels - welding table without accories

Condition: excellent (used), Year of construction: 2008, Amada EMK 3510NT electric punch, 45 Station Turret with 4 Auto indexing units 2008 Year of manufacture Country of Manufacture: Japan Bridge Type 30 tonnes (196kN) High speed AC servo direct twin drive 1270 x 2500mm 1270 x 5000mm ( ONE REPOSITION) 34.5 mm mild steel 150Kg max sheet weight mm 58 Stations Turret Dcedpow Dc Dyjfx Af Ijn Turret Stations: 36 x A (Max. Dia. 12.7mm) 12 x B (Max. Dia. 31.7mm) 4 x C (Max. Dia. 50.8mm) 2 x D (Max. Dia. 88.9mm) Auto Indexing Stations 2 x B (Max Dia 31.7mm) 2 x E (Max. Dia. 114.3mm)

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Dcedogd D U Ejpfx Af Ien Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: new, Motor ----- 750W - 230V - 1Phase Drilling capacity ----- 20 mm Pole stroke ----- 85 mm Dcedpfjk Iuqyjx Af Ien Spindle attachment ----- MK2 Number of speeds ----- 16 Spindle speed ----- 220-2840 rpm Work table ----- 305 x 305 mm Foot ----- 460 x 280 mm Column diameter ----- 72 mm Overall height ----- 990 mm Weight ----- 60 kg Packing ----- 820 x 500 x 290 mm INCLUDING * Digital depth stop * CE hood * Laser device * LED illumination * CE emergency stop * Drill head with MK2 adaptor * Drive key

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 11/7, Detailed Description of the Listing Type: Motorized folding machine, model RAS UpDownBend 78.30, designed for bending thin sheet metal. Unlike traditional press brakes, the beam executes up and down movements, enabling bending operations without the need to flip the workpiece. Ideal for large, heavy parts or pieces requiring multiple handling steps. Brand & Model: RAS UpDownBend 78.30 Year of Manufacture: 2009 Technical Specifications: • Positive and negative bending • Bending length: 3200mm • Bending capacity: 4mm mild steel • Minimum allowable bending radius: 1.5 x sheet thickness • Maximum upper beam opening height: 600mm • Maximum bending angle: 135° Dcedsw A It Rjpfx Af Ijn • Minimum flange length: 6 x sheet thickness • Backgauge depth: 95-1500mm • CNC control: CNC Controller 6000-4 • Connected load: 15kW • Weight: 11T Condition: Fully operational with some tooling requiring replacement Recent investments: • In 2024: CNC controller replaced by RAS • In 2024: Replacement of folding beam transmission motors with self-locking motors (new motors, cables, and drives); work carried out by RAS Included accessories: • Standard bending tools • Motorized front stops • Technical documentation in French Location: Linselles 59126, France Availability: Immediate Transport / Delivery: Machine preparation and transportation at the buyer’s expense Power disconnection and securing at the seller’s expense Additional Information: We are selling this machine following the recent purchase of a traditional press brake equipped with handling arms, which is better suited to our new production setup.

Condition: good (used), TABLE PRESS WITH POWER UNIT Dedpfx Afek Adfno Ijcn

Condition: good (used), Press force: approx. 6 tons Table size: 400 x 300 mm (W x D) Table opening: Ø 133 mm Ram size: Ø 70 mm Thrust: 178 mm Installation height: 240 mm (top stroke) Stroke: 1-100 mm Weight: approx. 480 kg Drive power: 2.2 kW Other features • Hydraulically driven • Continuously adjustable stroke rate Dedpfsvxvtxox Af Iscn • With protective screen for inserting work with secure tools • With height-adjustable mounting bracket (feed optional)

Condition: excellent (used), Year of construction: 2002, Model .Amada. Vipros 368 King Stock number 01967 Year of manufacture 2002 Frame Construction ... Bridge Type Dedpfxevn D Tfj Af Ijcn Press Capacity ... 30 Tonnes (294 kN) Press Type ... High Speed Hydraulic Servo Ram Axis Traverse Distance ... 1525 x 2000 mm Workable Max. Sheet Size ... 1525 x 4000 mm (with auto repositioning) Max. Material Thickness ... 3.2 mm mild steel Max. Hole Dia. Max. Material ... . (shearing strength 36 kg/mm2) 82 mm dia Max. Material Weight ... 75 Kg Max. Material weight ( Max. Speed) ... 60 Kg Max. Hole Dia. ... 114.3 mm Number Of Stations ... 58 stations:24 x 12.7 mm 24 x 31.7 mm 4 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm 2 x 114.3 mm Axis Speed ... 113.0 m/min Hits Per Minute (2mm pitch) ... 860 H.P.M./3 mm stroke (8mm pitch) ... 560 H.P.M./3 mm stroke (25mm pitch) ... 460 H.P.M./3 mm stroke Turret Speed Bi-Directional ... 30 R.P.M. Punching Accuracy ... ± 0.1 mm (incl. 1 reposition) Ram Stoke Length (maximum) ... 40 mm Tool Lubrication ... Air Blow System Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 28 kVA 400V +/- 10% 50Hz Air Pressure Required ... 5.0 Kgf/cm2 Air Flow ... 250 1/min Cooling Water Flow ... Min 40 1/min. Machine Length ... 5025 mm Machine Width ... 4120 mm Machine Height ... 2630 mm (3190 mm to mirror) Machine Weight ... 18000 Kg

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Djdpfjr I E Itox Af Iocn Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: new, Motor ----- 550W - 230V - 1Phase Drilling capacity ----- 16 mm Pole stroke ----- 85 mm Spindle attachment ----- MK2 Dcjdpfxok Iuzie Af Ion Number of speeds ----- 16 Spindle speed ----- 220-2840 rpm Worktable ----- 290 x 290 mm Foot ----- 420 x 250 mm Column diameter ----- 72 mm Overall height ----- 980 mm Weight ----- 47 kg Packing ----- 820 x 500 x 290 mm INCLUDING * Digital depth stop * CE hood * Laser device * LED illumination * CE emergency stop * Drill head with MK2 adaptor * Drive key

Condition: new, Year of construction: 2022, Estimated Equipment Weight 3500 Kg Equipment Dimensions (front x depth x height) (Ca. Aussenmasse) 1354 x 2005 x 2595 mm Table Dimensions (Useful Area) front x depth (Tischgroesse) Ø1050 mm Opening between table and hammer (Daylight) 350 mm Hammer stroke (Stoessel-Verfahrweg) 300 mm Drive power (Leistung in KW) 14,24 Kw Motor Rotation 1500,00 RPM Pump Flow 44,50 LPM Pump Motor Ratio 27,59 cm³/Rot Dcedpshmi T Usfx Af Isn Working Force (Zylinderleistung) 100,00 Ton Return Force (Rückzugskraft) 10 Ton Forward Speed 250 mm/s Working Speed with Pressure (Arbeitsgeschwindigkeit) 3~15 mm/s Return speed (Hebegeschwindigkeit) 150 mm/s Working Pressure (Maximaler Arbeitsdruck) 210,00 Bar Cylinder quantity 2 pc Stem Diameter 41,76 mm Cylinder Diameter 250,97 mm Cylinder stroke (Stoessel-Verfahrweg) 300,00 mm Reservoir Capacity (Volumen des Oeltanks) 350,00 Liters Extractor Cylinder 5,00 T Cylinder travel (Stoessel-Verfahrweg) 150,00 mm

Year of construction: 1955, condition: used, used manufactured by IMA type B55 built in 1955 Masch.-No. 0/650 pressing cylinder pneumatic 4 Dsdovwf Szopfx Af Ijcn table 2900x1300 mm working height 750 mm max. material thickness ca. 200 mm located in 97447 Gerolzhofen, free on truck, unpacked sale in current condition as seen without guarantee and warranty

Condition: good (used), Pressing force: approx. 10 tons Table size: 500 x 300 mm (W x D) Pedal size: 110 x 105 mm (W x D) Installation height: approx. 150 mm (large stroke at the top) Stroke: 5...29 mm Pedal adjustment: 25 mm Other • Rotating wedge coupling • Foot release • Control and protective screen as new, only used very little Dodpsvnrhwsfx Af Iocn • Without table

Condition: used, Size: 3,000 mm x 1,200 mm -no attacks Dodpfod Hwwusx Af Iecn -without pressing cylinders

Condition: new, Motor ----- 750W - 230V - 1Phase Drilling capacity ----- 20 mm Dcedpfega T E Uox Af Ion Pin stroke ----- 82 mm Spindle mounting ----- MK2 Variable speed Spindle speed ----- 400 ~ 2000 rpm Work table ----- 305 x 305 mm Foot ----- 460 x 280 mm Column diameter ----- 72 mm Overall height ----- 990 mm Weight ----- 61 kg Packaging ----- 820 x 500 x 290 mm INCLUDED * Digital depth stop * Digital spindle display * CE cover * Laser device * LED illumination * CE emergency stop * Drill head with MK2 adaption * Driven wedge

Condition: like new (used), HALT/ HASS Espec Here we offer you a temperature chamber. Temperature -100 to + 200°C Table in lower position (WxDxH) 889 x 889 x 889 mm Table in upper position (WxDxH) 889 x 889 x 635 mm Overall dimensions (WxDxH) 1425 x 1748 x 2134 mm Work table 762 x 762 mm Max load 145 kg Acceleration 5 to 75 gRMS Voltage 480 or 440 V / 60 A / 3F Dcsdpjqwybgofx Af Isn 400 or 380 V / 80 A / 3F Type: Qualmark T2.5 + compressor 99480630 Condition: used Only 147 hours Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) More We will be happy to answer any questions you may have over the phone.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3000x800x2100 mm Weight 1250 kg Dedpsvz Hxwjfx Af Iecn Total power requirement 0 kw

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 2,400 mm, total width: 1,500 mm, total length: 2,400 mm, pressing force: 20 t, overall weight: 2,000 kg, type of input current: three-phase, control cabinet width: 80 mm, input voltage: 400 V, control cabinet length: 60 mm, power: 22 kW (29.91 HP), input current: 32 A, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, height adjustment type: hydraulic, motor voltage: 400 V, type of motor: three-phase motor, Equipment: documentation/manual, If the press does not exactly match your requirements profile, please click here to request a customized offer tailored to your needs: Contact us for a customized quote HIDROBRASIL manufactures presses to your exact specifications at surprisingly competitive prices! ##### 20 T tablet press, single column press, C-press, manual insertion press Machine type: Hydraulic single-column press Year of manufacture: 2023 Location: Gelsenkirchen, Germany Technical specifications: - Pressing force: max. 20 tons (at 250 bar) - Free tearing force: max. 20 kN - Pressure build-up time: max. 2 seconds (closed tool steel on steel) - Maximum opening width: 500 mm - Stroke and minimum opening: 400/100 mm - Table height above floor: 800 mm - Total height: approx. 2400 mm - Hall height: at least 3,500 mm - Parallel deviation: +/- 0.1 mm at 20 °C - Deflection: 0.3 mm/m (at max. clamping force with 70 % occupancy) - Total weight: approx. 2 tons - Travel speeds: Fast closing 120 mm/s, pressing speed 10 - 5 mm/s - Sound pressure level: max. 78 dB(A) measured at a height of 15 m at the control panel in accordance with DIN 45635-T16-KL3 - Hydraulics: - Number of pressing cylinders: 1 pc. - Operating pressure: max. 250 bar - Pressure accuracy during the pressing stroke: +/- 5 bar - Main pump: Gear pump approx. 10 l/min - Oil volume: approx. 150 liters (HLP 46 MW) - Ambient temperature: max. 40°C - Oil temperature: max. 55°C - Electrical system: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 22 kW - Total connection: approx. 6 kW - Switch cabinet: - Protection class: IP 54 - Reserve space: approx. 20% - Cooling: no - Interior lighting: no Djdpfx Afjtv Ewde Iecn - Operating mode switch: lockable Features: - Light barrier: SICK/PILZ/SCHMERSAL - Position adjustment: via adjustable sensors - Pressure setting: 5 T to 20 T, adjustable via rotary control - Two-hand operation: standard, optional foot operation available - Table top: as a tray with 50 mm high edge and side drain - Control cabinet: on the right of the press, IP 54 protection class Function and operation: - Activation: via main switch - Pressure setting: via rotary control - Cycle activation: via two-hand operation or optional foot pedal - Safety features: in accordance with EU standards and UVV regulations Special features: - Crimping tool components: Upper tool with 8 pressing pistons, 3-part lower tool - Pressing cycle: can produce 8-12 pressed parts per minute - Hydraulic unit: can be completely dismantled for maintenance work Service and warranty: - Monitoring and testing: in accordance with DIN ISO 16092-3-2018 - Customer service: from Waibstadt or Gelsenkirchen - Documentation: in accordance with CE standards --- Are you looking for a customized machine? Contact us for a customized offer.

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers for 3 m sliding carriage Dcodpfxetxirfo Af Ijn