Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, feed length Y-axis: 200 mm, feed length Z-axis: 335 mm, travel distance X-axis: 400 mm, spindle speed (max.): 1,890 rpm, TECHNICAL DETAILS Drilling and milling head Milling head swivel range: ± 90° Drilling and milling capacity Cutter head size max.: 100 mm Drilling capacity steel (S235JR): 30 mm Continuous drilling capacity steel (S235JR): 26 mm Shank cutter size max.: 25 mm Electrical data Drive motor power: 2.2 kW Supply voltage: 400 V Mains frequency: 50 Hz Horizontal milling table Length: 750 mm Width: 320 mm Distance vertical spindle - horizontal milling table min.: 75 mm Distance vertical spindle - horizontal milling table max.: 410 mm T-slot size: 14 mm Number of T-slots: 5 T-slot distance: 63 mm Distance horizontal spindle - horizontal milling table min.: 70 mm Distance horizontal spindle - horizontal milling table max.: 400 mm Max. load capacity: 285 kg Vertical milling table Length: 830 mm Width: 250 mm T-slot size: 14 mm Number of T-slots: 2 T-slot spacing: 63 mm Coolant system Coolant pump Drive power: 95 W Travel (manual) X-axis: 400 mm Y-axis: 200 mm Z-axis: 335 mm Travel (automatic) X-axis: approx. 310 mm Y-axis: approx. 160 mm Z-axis: 295 mm Dsb E Awisu Nh Dnjrjut Vertical spindle Projection: 100 mm Spindle holder: ISO 40 DIN 2080 Speed range: 50 - 1,890 min-¹ Number of speed ranges: 12 steps Tightening bar: M 16 Quill stroke: 120 mm Max. load: 1,100 Nm Feed speeds X-axis: 10 - 600 mm/min Y-axis: 10 - 600 mm/min Z-axis: 10 - 600 mm/min Electrical connection Total connected load: 4 kW Motor(s) Rapid traverse X-axis Drive motor power: 0.375 kW Rapid traverse Y-axis Drive motor power: 0.375 kW Rapid traverse Z-axis Drive motor power: 0.375 kW Dimensions and weights Length: approx. 1,239 mm Width/depth: approx. 1,168 mm Height: approx. 1,900 mm Weight: approx. 1,400 kg EQUIPMENT With digital 3-axis position display DP 700 from NEWALL, inverter drive of the feed axes, control panel with integrated joystick for feed settings, electric feed limit switch-off, ball screw in all axes, central control panel with digital position and speed display, solid cross table with 5 T-slots, coolant device, machine lamp, manual central lubrication.

Condition: excellent (used), Functionality: fully functional, Ladies and Gentlemen, We hereby offer milling machines of the type Deckel FP3. The machine is at least technically checked in our workshop and is therefore fully functional. We are looking forward to your inquiry ! Delivery time: on request Dimensions: 2,00x1,60x1,90m (LxWxH) Weight: approx. 1500kg X-axis travel: 500mm Y-axis travel: 300mm Z-axis travel: 380mm Duob E Awioq H Eabsrjt Table clamping surface: 800x420mm Speed range: 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Axes with feed: X, Y, Z Feed speed: 10-500mm/min Rapid traverse: approx. 1500mm/min Further equipment and accessories: on request Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can overhaul the selected machine completely or partially - You are free to choose the paint color of the selected machine - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: like new (used), Year of construction: 2022, operating hours: 300 h, Functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 300 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 18,000 rpm, Sell BZT portal milling machine in mint condition, new price in 2022 approx. 24000€, travel X-500, Y-2500, Z-300mm, 18000rpm Debou Hxvie E Awirjut

Condition: excellent (used), Tool Milling machine Maho MH 300 M Lacquer original Travels : X 300 Y 200 Z 350 Speeds : 40 - 2000 Feed X and Z stepless + rapid traverse Table . 240 x 560 Head with drilling quill can be swiveled and swiveled away for horizontal milling . Tool holder SK 40 Emergency stop , central lubrication , spindle brake , coolant device documentation complete . Accessories : vice 120 new , 10 holders , various milling cutters see pictures . Machine can be purchased with or without accessories . Condition: very good , guides impeccable without any run-in marks , Djb Esucc E De Awirout absolutely smooth running at all speeds and feeds . Dimensions: H 1.55m D 1.2m W 1.05m Weight 600 kg can of course be inspected under power . Free loading D - 88433 Schemmerhofen .

Condition: good (used), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: 5.49.10.07, feed length X-axis: 15,000 mm, feed length Y-axis: 15,000 mm, travel distance X-axis: 710 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, table width: 600 mm, table length: 1,200 mm, TECHNICAL DETAILS Machine type: CNC milling machine Manufacturer: MIKRON Type: UMS 710 Control: HEIDENHAIN TNC 426 Serial number: 5.49.10.07 Year of manufacture: 1996 Table and axes Table length: 1,200 mm Table width: 600 mm Longitudinal travel (X-axis): 710 mm Transverse movement (Y-axis): 630 mm Vertical travel (Z-axis): 500 mm Dueb E Awieu Dnarjrjt Spindle Spindle speed up to: 6,300 rpm (42,000* rpm with high-frequency spindle) Tool changer Number of tools: 20 Feed rates Longitudinal: 0 mm/min to 15,000 mm/min Transverse: 0 mm/min to 15,000 mm/min Vertical: 0 mm/min Milling spindle motor Power: 11 kW Weight and dimensions Machine weight: approx. 4,690 kg Dimensions (L x W x H): 4,700 mm x 2,100 mm x 2,700 mm EQUIPMENT Rigid angled table High-frequency spindle with 42,000 rpm (make: FISCHER) Set of tool holders Coolant / mist extraction system (make: FIBARON) Machine can be inspected assembled and energized for inspection after consultation.

Condition: good (used), Zimmermann FZ 40 5 Axis CNC Gantry Mill Year 2002 Table 5500mm x 3000mm Max Load 30,000kg X axis 5500mm Y Axis 3000mm Z Axis 1500mm C Axis 200 +/- deg A Axis +/- 95deg Roughing Spindle 25kw / 8000rpm / 240nm High Frequency Spindle 17kw / 23,600rpm / 13.7nm Fanuc 31i Control Dsb E Asu A Sxcowirsut Distance Between Columns 4050mm Total Weight 59,000kg Footprint 9750mm x 7750mm x 5120mm

Condition: good (used), Dimensions: width 2000mm, depth 2000mm, height 1600mm Table: 620mm x 390mm Machine weight: approx. 1500kg Debsu A Iuys E Awirout Control: Dialog 4 Equipment: backlash-free ball screws, hydraulic SK40 tool holder, electric handwheel

Condition: like new (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, quill stroke: 60 mm, table width: 650 mm, table length: 350 mm, overall weight: 1,800 kg, Equipment: documentation/manual, Ladies and Gentlemen, We are selling a Kunzmann WF4/3 CNC milling machine built in 2004. The machine can be operated manually and controlled. The Heidenhain TNC124 control is ideal for learning the basics of CNC programming and is nevertheless very popular in production and for machining special parts. The vertical milling head, which can be folded away very quickly, rounds off the Kunzmann as a real all-rounder with a small footprint. The machine has been thoroughly checked by us in the workshop and is therefore in absolutely new condition. You are welcome to see this for yourself in advance. Availability: immediately Year of manufacture: 2004 Control: Heidenhain TNC124 Table: rigid angular table 650x350mm travels: X400mm/Y350mm/Z400mm Quill stroke: 60mm Connected load: approx. 7kW Speed range: 1-4000 rpm Feed rate: 0-2000 mm/min Tool holder: SK40 Equipment and accessories: Coolant device, central lubrication, manual, documentation, machine feet, electronic handwheel, etc. Our service promise to you: Dsbeu H U Hks E Awirsut - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can overhaul the selected machine completely or partially - On request, you can also order additional accessories such as tools etc. directly - On request, we can fit additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: used, Year of construction: 2013, Functionality: unexamined, power: 0.75 kW (1.02 HP), Urban 4 m bed milling machine SK40 for sale. Slightly used, has only been used a little! The machine was set up and commissioned by Urban in February 2023 and has very few operating hours. The machine has a pick-up station incl. angle head drive as an accessory. Bids ex location Dossenheim. Dujbsu Aqmls E Awirjt

Condition: good (used), Year of construction: 2000, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, MTE Compact Plus, Year of manufacture 2000, Control Heidenhain TNC 426, travel X/Y/Z 2000/800/800 mm, 20-position tool changer, Dueb E Awisu Afwrerot SK 50 holder, Table clamping surface 2,200 x 750 mm, spindle speed up to 2,250, max. table load 4,000 kg, feeds up to 4 m/min, Machine weight approx. 10,000 kg, connected load 30 KW,

Condition: good (used), Stock number: 2857 Manufacturer: WMW Einsiedel Year of manufacture: Machine number: 1930801288 Type / Model: FW 200x630/III Travel x-y-z: 380 - 140 - 230 mm Table: 630 x 200 mm Speed range: 67 to 1,500 rpm Spindle holder: horizontal SK 30 Vertical collet chuck holder Feed rates: 10 to 125 mm/min Rapid traverse: 2,100 mm/min Connection: 2.2 kW Accessories/equipment: Duob E Awjt Si Ulsirjt Condition: good Weight: 1 t Dimensions: 1,000 x 700 x 1,500 mm

Condition: good (used), Year of construction: 1994, Functionality: fully functional, feed length X-axis: 1,050 mm, feed length Y-axis: 360 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, Equipment: documentation/manual, Tiger FO 135 universal milling machine Description of the machine The machine was purchased new in 1994 and has only been in operation for a few hours. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition. good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a digital readout for the 3 axes, which makes it possible to work with cutter compensation and recurring measurement machining. Operating instructions are included with both the machine and the digital indicator. Dob E Awsrqwbijireut Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic traverse path: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ Direct current motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast feed ➢ Lengthwise and crosswise 3,000 mm/min Vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low-voltage electrical controls on the pushbutton panel of the side arm - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Machine dimensions (for transportation) ➢ Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accessories - Counter supports for cutting shaft - Cutting shaft ø32 mm Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully functional. Axis movements are smooth and the guides are in good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a DRO for the 3 axes, which offers the possibility of working with milling compensation and recurring measurement processing. Both the machine and the DRO come with operating instructions. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic travel: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed services: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast forward ➢ Longitudinal and transverse 3,000 mm/min ➢ vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low voltage electrical controls on side arm push button panel - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Dimensions of the machine (for transport) Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accesories - Counter supports for cutting shaft - Cutting shaft ø32 mm

Condition: good (used), Year of construction: 1995, Universal tool milling machine cover FP 1 several machines see pictures Type : FP 1 3-axis digital readout Heidenhain Price : from 9.500€ excl. VAT Technical data: Dueb E Awjtdcfheirst x-path: 300 mm y-path: 150 mm z-path: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed steps work spindle: 8 Feed range: 10 - 500 mm/min Feed steps: 8 Quill stroke: 60 mm Spindle holder: SK 40 ... Dimensions/weight: 1235x1160x1800 / approx. 800kg

Condition: used, X AXIS STROKE 4500 MM Y AXIS STROKE 1700 MM ( VERTICAL ) Z AXIS STROKE 1000 MM ISO 50 SPINDLE SPEED 3000 RPM MACHINERY WEIGHT 28 TON CNC NUM 750 ATC 61 PLACES AUTOMATIC HEAD AXIS A 1° AXIS B 3 Duebet Hr Iko E Awirjt

Condition: reconditioned (used), Functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, Ladies and Gentlemen, We hereby offer a Deckel FP1 3-axis active milling machine with retrofitted safety devices. These machines of the newer version have, among other things, central lubrication, an electric coolant pump and a brake motor. In addition, the control cabinet can be disconnected from the machine in no time at all thanks to the Harting plug. This type of connector is also used to connect the safety components to the control cabinet, so that handling is not compromised in any way. The retrofitted safety devices, which we can offer for every machine type, come with a 12-month guarantee! The electronic spindle guard can be adjusted in several axes and is designed to prevent interference with the working spindle as well as hazards from flying chips, coolant, etc. The electronic spindle protection cap is designed to prevent interference with the rotating stub shaft and tool clamping. Delivery time: on request Year of manufacture: 1989-1992 Machine no. 2102-xxxx Table: rigid angular table Travel: X300mm/Y160mm/Z340mm Quill stroke: 60mm Connected load: 1,9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Stepless 5-500 mm/min Rapid traverse: 1200mm/min Equipment and accessories: Coolant device, central lubrication, manual, machine feet, electronic spindle protection, electronic spindle protection cap Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance Dob E Awisuw Uu Nerout - On request, we can overhaul the selected machine completely or partially - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: good (used), Year of construction: 2008, feed length X-axis: 50,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, Unisign Univers 6 - 5000, Year of manufacture 2008, Siemens 840 D control system, Travel X/Y/Z 5000/800/600 mm, tool changer 52 times, SK 50 holder, Dusb E Awjup D Axsiret drive power 26 KW, Long machining or pendulum machining, 5-sided machining with interchangeable angle head,

Condition: ready for operation (used), Cover FP 1 Milling machine Traverse path X-axis: 300mm Y-axis travel: 160mm Z-axis travel: 340mm Mounting: SK 40 with tightening thread Feed X-axis: 290mm Weight: approx. 940 kg (with pallet) Space requirement: 1300mm x 1200mm x 1800mm ( L x W x H ) Dimensions with pallet: 1400mm x 1400mm x 2000mm ( L x W x H ) Dob E Awjuvih Hsirjut You are welcome to come by for a viewing. We are happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 4,500 rpm, No minimum price - guaranteed sale at the highest bid! Pick-up condition: Machine must be collected in week 44 - Bidder is obliged to collect the machine on time! Provision: free loaded (FCA) or own dismantling (EXW) possible Dismantling & loading costs are waived for EXW provision TECHNICAL DETAILS Control: TNC 430 HEIDENHAIN X-path: 2,500 mm Y-path: 1,000 mm Z-path: 1,250 mm Table clamping surface: 2,700 x 900 mm Spindle speed Speed: 4,500 1/min Tool holder: SK 50 Spindle motor: 20 kW Debsuu Agmo E Awirsut MACHINE DETAILS Table load: 8 t Machine weight: approx. 16.5 t EQUIPMENT - CNC milling machine - Head 2-fold indexed milling head: 1°/2.5 - chip conveyor - no changer

Condition: like new (used), Year of construction: 2010, Machine comes from the Daimler Benz technical center X 650 mm Y 500 mm Z 450 mm Table size 1,100 x 600 mm Table load 450 kg Speed range 6,500 rpm Spindle holder SK 40 Tool changer 24-fold Siemens 840 D control unit Total power 20 kW Machine weight 5500 kg Duob E Awistdfbmjrjt Bm9zrnafs87 Space requirement (W x D x H) 2.3 x 3.1 x 2.3 m Condition very good

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, for sale is a partially overhauled Deckel FP1 with 3-axis TNC113 active control, which is particularly distinguished by its ease of operation. This newer version from year of manufacture 1989 has among other things a central lubrication, an electric coolant pump and a machine lamp. The machine has been extensively overhauled in our workshop and is therefore in excellent condition. You can convince yourself of this on site. In the course of the partial overhaul, among other things, the following work was performed: - Spindle bearing of the milling head renewed - Repainting - Various standard parts such as handles, oil sight glasses, keys etc. renewed - Wear parts like drive belts etc. renewed - Bellows partly renewed - V-guides adjusted - and much more... Delivery time: immediately year of manufacture: 1989 Machine No. 2102-xxxx Table: rigid angle table travels: X300mm/Y160mm/Z340mm quill stroke: 60mm Connected power: 1,9KW number of spindle speed: 16 Speed range: 40-2000 rpm Dlp00n tool holder: SK40 feed rate: stepless 5-500 mm/min rapid traverse: 1200mm/min Equipment and accessories: coolant system, central lubrication, manual, machine feet Our service promise to you: Djbspy Elds E Awirout - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and possibly worn parts are exchanged in advance - On request, we overhaul the selected machine completely or in part - If desired, they can order additional accessories such as tools, etc. directly with - On request we can mount further accessories like safety devices etc. for you - Gladly we take care of the dispatch and/or the bringing in

Condition: good (used), Year of construction: 2003, Matec 30 HV / 5 axles, Year of construction 2003, Control Bosch type 3 Osa, Travel X/Y/Z 3000/800/1100 mm, spindle speed up to 12,000 rpm, HSK 63 holder, NC swivel milling head +/- 90°, Work table 3500 x 835 mm, integrated rotary table Ø 630 mm, IKZ 70 bar, paper belt filter, Dujbeuhzbze E Awirot chip conveyor, clamping hydraulics, NC rotary table, annual maintenance,

Condition: used, Cover FP 1 Milling machine Traverse path X-axis: 300mm Y-axis travel: 160mm Z-axis travel: 340mm Mounting: SK 40 with tightening thread Feed X-axis: 290mm Feed Z-axis: 330mm Control: Heidenhain Weight: approx. 940 kg (with pallet) Space requirement: 1300mm x 1200mm x 1800mm ( L x W x H ) Dimensions with pallet: 1400mm x 1400mm x 2000mm ( L x W x H ) You are welcome to come by for a viewing. We are happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Dusbjuuy Hqj E Awiret Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 10,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, Unisign Uniport 6000, Year of manufacture 2008, Dujb Eeuqkkrj Awirjt Siemens 840 D control system, Travel X/Y/Z 10,000/2500/1000 mm, 5 side machining with interchangeable angle head, spindle speed up to 6,000 rpm, SK 50 tool holder, tool changer 170 times, rapid traverse 36 m/min,

Condition: good (used), Year of construction: 2001, travel distance X-axis: 12,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,200 mm, Unisign Uniport 7, Year of construction 2001, Siemens 840 D control system, Travel X/Y/Z 12,000/2,000/1,200 mm, tool changer 180 times, SK 50 holder, spindle speed up to 6,000 rpm, max. table load 2,000 kg/m², 5 side machining with interchangeable angle head, Spindle drive power 37 KW, Dob Ejuwn Ens Awirjut rapid traverse 36 m/min,

Condition: good (used), Year of construction: 2016, BG Cam 1325 ATC, Year of manufacture 2016, Siemens 808 D control system, Travel X/Y/Z 1270/2540/150 mm, High pressure vacuum table, Table with 4 zones, Yaskawa servo motor drive, rapid traverse X/Y 35 m/min, rapid traverse Z 15 m/min, Duob E Awiouhzyqorst Resolution 0.001 mm, repeat accuracy 0.01 mm, Spindle speed up to 24,000 rpm, new spindle 2024, ER 25, 6-station tool changer, linear guides, tool length measurement, vacuum pump, suction foot,