Tool milling machine Milling machine

Deckel FP 1

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of construction: 1976 - workshop tested Machine no.: 53426/08 geometric acceptance with test report Accessories: - 3-axis digital display Heidenhain ND 750 - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system Codpfx Aoflc N Asb Teaa - Counterholder with counter bearing - Operating instructions - used, as seen, but without guarantee -

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 7,900 h, machine/vehicle number: #652, load capacity: 350 kg, mast type: telescopic, lifting height: 28,000 mm, platform length: 1,800 mm, platform width: 800 mm, overall weight: 7,490 kg, transport length: 7,550 mm, transport width: 2,500 mm, construction height: 3,450 mm, Attention: This rental fleet machine is expected to become available in January 2026. Working height: 30.00 m Platform height: 28.00 m Lateral reach: 20.50 m Codpswnq Dpsfx Ab Teaa Overall length: 7.55 m Overall height: 3.45 m Overall width: 2.50 m Platform capacity: 350 kg Permissible total weight: 7,490 kg Work basket (l x w x h): 1800 x 800 x 1100 mm Swivel range: 540° Basket rotation: +/- 85° Stabilizers: 2.56 / 3.90 / 5.10 m Other: - Basket arm 195° - Crank rotary table - Automatic basket arm rest - Roof protection grid 04/2024: Clutch + master-slave cylinder replaced and oil pan & fuel filter sealed 09/2024: Right joystick module replaced 10/2024: Fuel filter, basket tilt sensor replaced 11/2024: Rotary encoder replaced 01/2025: 2x truck battery replaced 04/2025: Solenoid coil As of 28.04.2025: approx. 73,000 km, approx. 7,900 operating hours Price: ON REQUEST

Condition: excellent (used), Year of construction: 1986, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 290 mm, Year of manufacture: 1986 Travel paths: X = 300 mm Y = 160 mm Z = 290 mm Equipment: Standard accessories Vertical milling head, SK 40/20x2 Fixed angle table 210 x 600 mm, NEW! Retrofitted safety device for milling spindle, electrically protected, NEW! Active digital display (TNC113), 3 axes Cedpfx Abewgafyo Teaa Coolant system Machine light Machine feet Documentation Condition: Good, mechanics and control system workshop-tested

Condition: used, Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm table width 120 mm voltage 380 V frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t Cedpfx Abjvvnfue Toaa dimensions of the machine ca. 1,8 x 1,5 x 1,8 m DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN documentation various tool holders Machine vice etc.

Condition: used, Year of construction: 1988, x-travel 310 mm Codpet Hxatjfx Ab Tjaa y-travel 340 mm z-travel 170 mm total power requirement 2,5 kW weight of the machine ca. 900 kg dimensions of the machine ca. m

Condition: good (used), TOOL MILLING MACHINE DECKEL FP 1 Cajdpfx Abox A D Nfo Tja - Travel X/Y/Z: 245-150-340 mm - Without vertical head / Machine was used exclusively for horizontal milling operations - Speed range: 95 - 1900 rpm - Dividing head - Automatic feeds on X & Y axes - Various collets and tool holders - Documentation included Dimensions: LxWxH 1.1x0.9x1.6 meters / Weight: 600 kg Errors and omissions excepted

Condition: good (used), DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Expansion of working area to: 300 x 260 mm Spindle speeds, vertical/horizontal: 40 – 2,000 rpm Gear stages: 16 Csdpsxyc Tkefx Ab Toaa Spindle taper: SK 40 Tool holder: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z axis: 5 – 500 mm/min Feed adjustment: stepless Rapid traverse X/Z axis: 1,200 mm/min Feed Y axis: manual Fixed angle table: 600 x 210 mm Tilting vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data subject to change! Features: - For horizontal machining, the milling head is swiveled 90 degrees and pushed to the rear. - 3-axis precision digital readout HEIDENHAIN - Stepless feed on X/Z axis - The machine was partially overhauled by a specialist company a few years ago. Equipment: - 3-axis digital readout HEIDENHAIN - Micro coolant spray system - Fixed angle table - Chip tray - Machine lamp - Machine feet Further accessories available on request! Condition: Good to very good, from a training workshop Available from March 2026

Condition: excellent (used), The used SCHAUBLIN 120 VM precision parallel lathe is a medium/small sized Swiss manual lathe, 120mm center height, 600mm center distance, 25mm spindle hole. Cajdpfx Abewqxcfo Toa Complete machine with feeds and various equipment, already complete with electrical panel and safety devices; equipment and conditions as per photo.

Condition: refurbished (used), Year of construction: 1978, Universal tool milling machine Make: DECKEL Model: FP 1 with stepless feed year of construction: ca. 1975 - partly overhauled, new painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue Caodpfedf E H Ajx Ab Tsa with warranty geometric acceptance with test report accessories: - 3-axis digital display FAGOR Innova 30i-M, new - fixed table 600 x 250 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - cooling device - operating instructions - used, as seen -

Condition: excellent (used), DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 2-axis Digital Readout Travel Paths: X/Y/Z: 300 x 160 x 340 mm Manual Adjustment Milling Head Arm: 100 mm Extension of Working Area to: 300 x 260 mm Spindle Speed Vertical/Horizontal: 40 – 2,000 rpm Gear Steps: 16 Spindle Taper: SK 40 Tool Fixture: S20 x 2 (Deckel Standard) Quill Travel: 60 mm Feed X/Z Axis: 5 – 500 mm/min Feed Control: stepless Rapid Traverse X/Z Axis: 1200 mm/min Feed Y Axis: manual Fixed Angle Table: 600 x 210 mm Casdpfx Aexyc N Ejb Tsa Tilting Vertical Head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data not binding! Features: For horizontal machining, the milling head is swivelled 90 degrees and slid to the rear. 2-axis precision digital readout HEIDENHAIN POSITIP VRZ 719 Infinitely variable feed on X/Z axis The machine underwent partial overhaul by a specialized company a few years ago. Equipment: 2-axis HEIDENHAIN digital readout Fixed angle table Chip tray Machine lamp Machine feet Further accessories on request! Condition: good to very good from training workshop Available from March 2026

Condition: new, High performance threading machine with lead screw device. Safety device against tool breakage. Programs for single and continuous cycle, programmable thread depth, piece counter, LED light and electronically controlled motor brake for the single cycle. Easy change of lead screw by quick coupling. Normal drilling capacity 15 mm Thread cutting capacity M 3 - M 10 Threads per hour 1.000 Spindle MK 2 Thread depth 60 mm Drilling depth 100 mm Throat 250 mm distance spindle/table 185 to 541 mm Table surface 340 x 445 mm T-slot width 12 mm Caodjfrlndopfx Ab Tsa Column diameter 90 mm Total height 1,050 mm Weight 120 kg Special motor 0,55 kW Power supply 400 V/50 Hz BT 18 GL M00033 4 spindle speeds 320 min-1 560 min-1 1,000 min-1 1,600 min-1 Also available as pillar drilling machine BS 18 GL (M00034)! Digital display for speed as standard. 200 mm longer column 14154

Condition: reconditioned (used), Year of construction: 1984, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1984 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray Mach. no.: 2102-2520 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X, Y and Z axes - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system Csdpshtq Edofx Ab Tjaa - Operating instructions - used as seen -

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 Csdpfxomhfrrj Ab Toaa with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine corresponds technically to the state of the year of manufacture.

Condition: used, Year of construction: 1978, x-travel 300 mm Caodpfx Abewl N R Ns Tea y-travel 160 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, counter bearing, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: reconditioned (used), Year of construction: 1987, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1987 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray Mach. no.: 2102-3429 with guarantee geometric acceptance with test report Casdpohtrd Ijfx Ab Tja Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X, Y and Z axes - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Central lubrication, electric - Operating instructions - Used as seen -