Condition: used, Year of construction: 1972, Milling machine used Make:Kunzmann Model: UF6N year of construction: 1972 Dehx Dneudb N Djk Teut Technical data: Table longitudinal travel automatic: 440 mm Table longitudinal travel by hand: 450 mm Transverse table travel 200 mm Table vertical travel horizontal/ vertical 465/500 mm Table size 860x240 mm Table swivels 45° on both sides Distance table/spindle 430 mm Spindle holder ISA 30 Quill stroke 60 mm Tiltability of the spindle head +/- 90 18 spindle speeds horizontal 32-1342 rpm 18 spindle speeds vertical 72-2888 rpm 6 automatic feeds lengthwise 13.12-164 mm/min 6 automatic cross feeds 26.24-328 mm/min. Spindle drive 1.8/2.6 kW with inclinable vertical milling head/clamping vice/ Counter holder/collet chuck with collets Weight approx. 850 kg Dimensions approx. 1400x1900x1800 mm

Condition: ready for operation (used), Year of construction: 1987, Functionality: fully functional, machine/vehicle number: 2803-3500, feed length X-axis: 400 mm, feed length Y-axis: 320 mm, feed length Z-axis: 400 mm, spindle speed (max.): 3,150 rpm, spindle speed (min.): 32 rpm, For sale is an FP3NC with Heidenhain MC 320 control. The machine has recently been equipped with the control and the functions have been tested. The machine is offered without tools/vise. The table is included in the scope of delivery. On request, delivery throughout Germany is possible at cost. Dujhx Djt Dmx Eenk Tst

Condition: new, x-travel 300 mm Dehjfrzunox Dnk Tsut y-travel 200 mm z-travel 350 mm table-size 700 x 200 mm spindle taper ISO 40 turning speed range - horizontal 150 - 1660 U/min turning speed range - vertical 110 - 1230 U/min quill stroke 120 mm spindle drive 3,0 kW weight of the machine ca. 1,15 t dimensions of the machine ca. 1,31 x 1,38 x 1,65 m

Condition: good (used), Stock number: 2888 Make: Hermle Machine number: Type / Model: FU 801 Travel x-y-z: 400 - 150 - 350 mm Manual travel: 430 - 160 - 370 mm Table: 800 x 220 mm Speed range: 50 to 3,150 rpm Spindle holder: SK 40 Feed rates: 4 to 1,100 mm/min Dohx Dnksub Rxce Tout Rapid traverse: 8 to 3,300 mm/min Connection: Accessories/equipment: Coolant device; counter bearing, dividing head (integrated), various holders, various horizontal spindles Condition: good, Z-axis only works with manual adjustment Weight: 0.8 t Dimensions: 2,300 x 1,700 x 2,400 mm

Condition: used, Year of construction: 1971, x-travel:450 mm y-travel:320 mm z-travel:450 mm table-size:950 x 300 mm spindle turning speed range:39-2320 U/min spindle taper:SK 40 power capacity - milling spindle:2,5 kW total power requirement:2,8 kW Duohx Dsiv Tf Henk Tet weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,3 x 1,8 m with vertical head, spindle quill, swivelling horizontal spindle, variable adjustable feed for all 3 axes, coolant device, machine light, chip pan, emergency cut-off

Condition: like new (used), Year of construction: 2004, Functionality: fully functional, GANTRY ROTOTRANSLATING TABLE MILLING MACHINE EQUIPPED WITH SELCA 4060 PD NUMERICAL CONTROL X- AXIS CHAIR 1,600 mm. Y AXIS COURSE 2,000 + 500 mm. for tool change Z AXIS THROUGH 900 mm. Dujhxst I Tuze Dnk Tot ROTARY TABLE DIMENSION (C AXIS) 1,200 X 1,200 mm. MAXIMUM LOADABLE WEIGHT : Kg. 2.000 T-slots No. 9 slots width 18 mm. Distance between columns 1,550 mm. Electrospindle power S1 28 Kw at 3,000 rpm. 24-position tool changer SELCA numerical control type 4060 PD electric cabinet cooling unit (airc) "Spray mist" type tool cooling system (SPR) Laser system for tool integrity check measurement

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 271297, feed length X-axis: 2,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 600 mm, Milling Machine GOGLIO Model FX20 CNC Year 1997 Condition Used Serial Number 271297 X axis stroke 2000 MM Y-axis travel 750 MM Z-axis stroke 600 MM Numerical Control SELCA 3045 Dshx Djt I Em Njnk Tsut Spindle taper ISO 50 Tool changer 15 Pos Dimensions 5000x3000x2900H mm Weight 12000 kg Ready for delivery Location: Parma (Italy)

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, machine/vehicle number: M-970504, travel distance X-axis: 2,500 mm, travel distance Y-axis: 935 mm, travel distance Z-axis: 900 mm, rotational speed (max.): 3,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Control: 2x Heidenhain Bed dimensions: 2900 x 800mm Dohx Dnot H Nmdok Teut Rotatable table: 800 x 800mm Travel X / Y / Z: 2500 / 935 / 900 mm Rotatable milling head Spindle speed: 3000 rpm Tool holder: ISO 50 Tool places: 30 pieces MACHINE DETAILS Machine dimensions: 6500 x 3200 x 3500 mm Machine weight: 18500 kg EQUIPMENT - Accessories - Documents

Condition: used, x-travel 1000 mm y-travel 860 mm z-travel 800 mm table-size 1200 x 710 mm spindle taper ISO MK 4 turning speed range - vertical 45 - 2800 U/min quill stroke 300 mm total power requirement 7,0 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,2 x 2,3 x 2,4 m Universal milling machine - Heidenhain digital display - Angle head Duehxjt Dcvmj Dnk Tet - Gear head - Machine lights

Condition: good (used), Manufacturer: WMW Machine type: FUW 200/1 WMW Auerbach Machine number: Type / Model: Turn-tilt-swivel table Table top: 540 x 245 mm Clamping surface: 460 x 175 mm Stop surface: 290 x 195 mm Slot width: mm Groove spacing: mm Dehxeuan Rms Dnk Teut Table cross adjustment: 135 mm Equipment: rotatable, tiltable and swiveling Condition: good Weight: 80 kg Dimensions: 550 x 500 x 300 mm

Condition: used, Year of construction: 2003, x-travel:930 mm y-travel:400 mm z-travel:406 mm turning speeds:9-6750 1/min table::1370 x 254 quill stroke:127 mm quill feed:(3) 0,04; 0,08; 0,15 mm/U bore capacity in steel:32 mm feed range:19 - 890 (x) mm/min spindle cone:SK 40 Dohx Djt U Rm Ionk Tsut column arm:200 - 680 mm total power requirement:4 kVA weight of the machine ca.:1,15 t dimensions of the machine ca.:1,5 x 1,45 x 2,2 m 3-axis RSF-electronic Z503 digital display, swivelling vertical head +/- 90°, all 3 axes with Feeds, spindle quill (60 mm), switchable spindle brake, coolant system, bore-feed 0.03; 0.12; 0.06 mm/rev. machine light, angled table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders etc.)

Condition: like new (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: MATRICOLA N. 196729, NO.1 TRANSVERSE MOVING COLUMN MILLING MACHINE MM. 1210, VERTICAL STROKE MM.1000, "BRUSHLESS" A.C. AXIS MOTORS. , A.C. SPINDLE MOTOR POWER 20.5 KW (S6), TRANSMISSION WITH 2 SPEED RANGES, BALLSCREWS WITH PRELOADED NUT ON 3 AXES, COOLING SYSTEMS OIL LUBRICATION GEAR-HEAD, ELECTROMAGNETIC SAFETY BRAKE VERTICAL AXIS, LINEAR GUIDES WITH ROLLER PADS, HYDROPNEUMATIC COUNTERWEIGHT, AXIS FEED SPEED 25 M/MIN. LONGITUDINAL STROKE MM. 3000 TABLE 3200X710 SELCA S4045D CONTROL PORTABLE ELECTRONIC HANDWHEEL FAST CPU FOR SELCA CONTROL KOSMO 5000 UNIVERSAL BI-ROTARY AUTOMATIC HEAD, 5000 RPM/1' ISO 50 Djhx Dnet I Tr Hok Tsut FAEMAT ELECTROMANDRIN FA 120 CU, 30,000 rpm, 10 KW , 3 Nm

Condition: good (used), Technical data: - Longitudinal stroke: 3,500 mm - Slide stroke: 1,100 mm - Vertical travel: 1,500 mm - Table dimensions: 3,800 x 1,000 mm - Spindle taper: ISO 50 - Spindle speed: 5,000 rpm - Tool changer: 40 places - CNC: SELCA S 4045 PDH Dushetq Tnbox Dnk Tjt

Condition: ready for operation (used), Year of construction: 1992, Abene VHF 3 milling machine Abene VHF-3 Table size 1200×320 Longitudinal displacement 715 mm Duehx Dnjt E Dikek Tot Transverse displacement 275 mm Vertical displacement 500 mm Speed 44-2000 rpm Automatic feed X Y Z Idle speed X Y Z Automatic feeding is infinitely adjustable in the X Y Z 3 Axis digital readout from Heidenhain.

Condition: new, x-travel 600 mm y-travel 300 mm z-travel 350 mm table-size 1120 x 260 mm spindle taper ISO 40 spindle turning speed range 67 - 2010 U/min quill stroke 120 mm bore capacity in steel 40 mm total power requirement 2,2 kW Dohxsf Nb Hce Dnk Tsut weight of the machine ca. 1,3 t dimensions of the machine ca. 1,58 x 1,45 x 2,15 m

Condition: used, Year of construction: 1984, x-travel 1400 mm y-travel 630 mm z-travel 500 mm gear width 60 mm spindle cone SK 50 table surface area 1800 x 500 mm table load 2 t voltage 380 V frequency 50 Hz total power requirement 32 kW weight of the machine ca. 6 t dimensions of the machine ca. 4,2 x 5,2 x 2,35 m Dushjt Ev Tzox Dnk Tjt incl. scrap conveyor, new control panel with TFT monitor, CNC control

Condition: used, Year of construction: 2003, x-travel:760 mm Duehx Dst U Rm Uenk Tot y-travel:290 mm z-travel:370 mm turning speeds:60 - 4200 U/min table::750 x 230 quill stroke:127 mm quill feed:(3) 0,04; 0,08; 0,13 mm/U feed range:19 - 890 (x) mm/min spindle cone:SK 30 column arm:171 - 476 mm total power requirement:2,4 kVA weight of the machine ca.:0,95 t dimensions of the machine ca.:2,05 x 1,63 x 2,07 m 3-axis RSF-electronic Z503 digital display, swivelling vertical head +/- 90°, all 3 axes with Feeds, spindle quill (60 mm), switchable spindle brake, coolant system, bore-feed 0.03; 0.12; 0.06 mm/rev. machine light, angled table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders etc.)

Condition: new, Year of construction: 2024, General refurbished, as good as new machine, modernized to the legally prescribed safety standard "state of the art" according to the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS active - digital display Speed 50 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling performance Feed rate 6,3 to 630 mm/min, infinitely variable rapid traverse 1,3 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x460mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Duohx Dnjh R S Tcok Tot Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: used, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, Milling machine, second-hand Make: Fadal Model: 904-1 VMC 3016 Year of manufacture: Serial No. 9401487 Technical data: X-travel 762 mm Djhx Dnkstud Uto Tjut Y-travel 406 mm Z-travel 508 mm Spindle holder: SK 40 Spindle speed 8000 rpm Machine weight: 3800 kg

Condition: reconditioned (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 1,200 mm, table load: 2,000 kg, rotational speed (max.): 4,000 rpm, controller manufacturer: Heidenhain, controller model: TNC i530, Machine has been overhauled by technical experts for used milling machines CME. Dehx Det Di Tfenk Tjut TECHNICAL DETAILS Travel: 1200 x 750 x 750 mm Working speed: 20 m/min Rapid traverse: 30 m/min Speed: 4,000 rpm Control: Heidenhain TNC i530 Table size: 1300 x 700 mm Table load: 2 t Fixture: ISO-40 Power: 28 kW EQUIPMENT - Electronic handwheel - chip conveyor Machine is in very good condition and ready for immediate commissioning.

Condition: good (used), travel distance X-axis: 6,626 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 2,040 mm, Mecof CNC Bed Type Milling Machine x 9000mm Table 9000mm x 2200mm Djhx Dstv Nbbjnk Teut 2 off sub tables 1000mm x 11500m. Travels X 6626mm, Y 1000mm, Z 2040mm Heidenhain 426 CNC Control

Condition: used, X AXIS TRAVEL 2500 MM Y AXIS TRAVEL 1600 (COLUMN ) MM Dohx Dnotv H Ayjk Tjut Z AXIS TRAVEL 1500 (VERTICAL) mm TABLE 2700 X 1100 MM MAX WORKPIECE LOAD 10000 KG SPINDLE RPM MAX 6000 RPM SPINDLE POWER 28 KW ISO 50 DIN 69871 CNC HEIDENHAIN TNC 426 ATC 20 PLACES AUTOMATIC HEAD 2,5°x3°

Condition: new, Year of construction: 2024, machine/vehicle number: 2103 XXXXXX, The FPS 300M, heiress of the DECKEL FP1. Through our many years of experience in service, we decided to develop and produce our own milling machines. The FPS 300M is a conventional milling machine perfect for training and production. Control Dohx Dnkjh I Nqwj Tjut 3-axis - FPS Active - digital display Speed 40 - 2000 rpm geometrically stepped direct gearbox with 16 gear steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angular table 600x210mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: new, Year of construction: 2024, Through our many years of experience in service, we have decided to develop and produce our own milling machines. The FPS 500M is a conventional milling machine perfect for training and production. Through the Heidenhain Positip 8016 active digital display positioning and for example the creation and approach of a bolt hole circle is possible. Control Heidenhain Positip 8016 Active - Digital display Speed 0 - 3000 rpm geometrically stepped direct gear with 16 gear steps for maximum torque / milling power Feed rate 0 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min Djhx Dnsh Su Ipek Tout quill extendable quill, vertical 80 mm SK40 optional: horizontal work spindle or horizontal quill (approx. 100mm extendable) Pulling system: hydraulic tightening system - DIN 69872 optional: DIN 2080 Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x480mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. - Travelling chip tray - Machine light - Central lubrication - Z-axis bellows Options - universal table - rotary table - Shaper head - dividing head - counterholder - etc. Further technical data can be found in the attached data sheet.

Condition: new, Year of construction: 2024, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 800/300/400 mm Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table Djhx Dneh Sptnjk Tjut - rotary table - Shaper head - dividing head - counterholder - etc.