Condition: used, Year of construction: 1973, x-travel 550 mm y-travel 155 mm z-travel 350 mm taper in main spindle SK 30 / DIN 2080 table surface area 640 x 200 mm turning speeds 50 - 1500 U/min feeds 30 - 340 mm/min distance spindle - column 165 mm distance spindle nose and table 245 mm voltage 380 V total power requirement 1.3 kW weight ca. 1250 kg range L-W-H 950 x 1000 x 1600 mm from a vocational school (!) Furnishing : - robust / conventional universal milling machine - rotatable / swiveling vertical milling head - Stable T-slot clamping/angle table - automatic table longitudinal movement - Feed range adjustable - 8x steps - Pole-changing drive motor Crjb Hlou Sbanjwzfjb

Condition: used, Year of construction: 1997, operating hours: 18,298 h, Functionality: limited functionality, machine/vehicle number: 178-49, travel distance X-axis: 2,000 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 520 mm, feed length Z-axis: 630 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 2,000 m/min, feed rate Y-axis: 520 m/min, feed rate Z-axis: 630 m/min, tool mount: 40 mm, rotational speed (max.): 6,000 rpm, input voltage: 400 V, power: 27 kW (36.71 HP), Equipment: rotational speed infinitely variable, CHIRON Type FZ 22 CNC vertical machining center Crsbevi Ntgj Hlwzfjb CNC control Simens 810 Tool holder SK 40 DIN 69871 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Spindle speed max. 4500 Main spindle drive max. 27KW Thread cutting capacity M36 Milling capacity 460cm³/min Torque 360NM Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - Tool changer 40-fold must be overhauled - Indirect measuring system - Coolant unit with chip conveyor opposite Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport weight on the truck approx. 10 tons.

Condition: like new (used), Year of construction: 1987, Functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed Mint CONDITION Ceb Hlwzsu R D I Sefjrb Technical data: >> Year of manufacture 1987 Machine no. 2102-3536 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication >> Machine lamp >> Coolant device >> Operating instructions, spare parts plan About the machine : Ccbroxg Universal milling machine Deckel FP1 built in 1987 in mint original condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: used, lunette, steady rest, lynette Cob Hlsu Rv Svowzferb -Clamping tool: clamping bracket -Clamping width: 142 mm -Dimensions: see photo technical drawing -Dimensions: 165/70/H125 mm -Weight: 2.5 kg

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 33064 Year of construction approx. 1960 travel X: 300 mm Y: 150 mm Z: 330 mm table size 600 x 210 mm spindle mounting MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 1,1 and 1,4 kW Mains connection 380 Volt, 50 Hz - feed in X- and Y-axis - pinol shift at vertical milling head - fixed angular table - coolant unit with mechanical pump in the machine base - adjacent switch cabinet with cable plug connection space requirement L x W x H 1100 x 900 x 1600 mm weight approx. 900 kg good condition Crob Hlwzsdzp T Eofsb machine new painted in original grey color

Condition: used, Year of construction: 1988, x-travel 500 mm Crsb Hlwzju Rutfefjb y-travel 400 mm z-travel 400 mm total power requirement 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2*2*2 m 1 x UWF 700 Digi 3 x UWF 801 TNC 135 + 124 1 x UWF 802 M From stock liquidation, partly not functional / in need of repair Price VHS / against bid

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, Brand CORREA Model CF22/25 Heidenhain TNC-420 numerical control (possibility of retrofit tnc 620) Year of manufacture 1999 Fixed bench type TECHNICAL SPECIFICATIONS DIMENSIONS Table dimensions 2,500 x 700 mm Number of slots 5 T-measurement 22 mm DISTANCES X axis 2,500 mm Y axis 800 mm Z axis 800 mm MACHINE FEEDS Range 5-5000 mm/min Rapid feed / X,Y-Z 12,000 mm/min WEIGHTS AND DIMENSIONS Crjboviwahe Hlwzfsb Machine weight 10.000 Kg Maximum admissible table weight 3.500 kg Machine dimensions 6,400 x 3,345 x 2,800 mm

Condition: used, X-AXIS STROKE 6300 MM Y-AXIS STROKE (VERTICAL) 1700 MM Z-AXIS STROKE 1000 MM ISO 50 SPINDLE SPEED 1200 RPM Ceb Hsvir Nqslwzferb 8000 X 1060 MM TABLE CNC HEIDENHAIN iTNC 320/530 BI-SPINDLE HEAD WIT ROTAZIONE 1 ° ( 360 POSITION )

Condition: excellent (used), Functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed Light gray Super CONDITION Technical data: >> Year of construction approx. 1990 Machine no. 2102-5231 >> Rigid angle table >> Speed: 40 - 2000 rpm Cjbeu Rn Tls Hlwzfjrb >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electrical central lubrication >> Coolant device >> Operating instructions, spare parts plan To the machine : We offer universal milling machine Deckel FP1 in very good condition in light gray. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: used, lunette, steady rest, lynette Csb Hlwzju Rv S Asforb -Clamping tool: clamping bracket -Clamping width: 148 mm -Dimensions: see photo technical drawing -Dimensions: 190/67/H45 mm -Weight: 2.0 kg

Condition: used, High-speed milling spindle HENNINGER type 801 - N 503 Crob Hofxg T Ujlwzfeb Speed max. 6000 rpm at 70% ED Gear ratio 1:6 Power transmission up to 2.5 kW Front dimension 110 mm (machine spindle to clamping nut) Tool holder SK 40 - S20x2 Collets Ø 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 / 15 / 16 mm in wooden storage box The head is equipped with bronze gears for high torque. Dead weight 5 kg Weight complete 9.4 kg good condition

Condition: used, Year of construction: 1991, x-travel 560 mm y-travel 500 mm z-travel 400 mm control Heidenhain TNC 114 Aktiv turning speed range 40 - 4000 U/min Crsb Hlou Rur Ujwzfob spindle drive, 2-steps 3,3 / 4 kW total power requirement 9 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,3 x 2,3 x 2,1 m

Condition: used, clamping height 45 to 90 mm Crob Hjvimv Selwzfjb width of T-slots 12 mm 2 units/pieces at complete price weight approx. 2.3 kg

Condition: used, Year of construction: 1973, x-travel:815 mm y-travel:400 mm z-travel:410 mm quill stroke:130 mm turning speed range - stepless:67 - 2300 U/min Crjb Hlwzjvimrmjfsb :8 feed speeds:0,04 - 0,08 - 0,15 mm/min feeds of table:15 - 230 mm/min table surface area:1120 x 255 mm T-Slots:3 mm T-slot - width:16 mm T-slot - distance:63 mm distance spindle - column:260 mm ram adjustment:315 mm main drive motor:1,5 kW weight of the machine ca.:1,0 t dimensions of the machine ca.:1,75 x 1,80 x 2,10 m

Condition: excellent (used), Year of construction: 1984, Functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed Super CONDITION Technical data: >> Year of construction 1984 Machine no. 2102-2601 >> Turn-tilt-swivel table >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm Crsbsu Racre Hlwzfjb >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: Dpbyzb >> 3-axis digital display Heidenhain TNC113 >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1984 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: used, lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 167 mm -Dimensions: see photo technical drawing -Dimensions: 190/60/H135 mm Cob Hou Rv Spolwzforb -Weight: 3.4 kg

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 52185/08 Year of construction 1968 travel X: 300 mm Y: 150 mm Z: 340 mm Cjbodzqb Se Hlwzferb table size 600 x 250 mm spindle reception SK 40 - S20 x 2 spindle speed 40-2000 rpm. 16 steps motor power 1,0 and 1,4 kW pole changeable Mains connection 380 Volt, 50 Hz - Feed in X- and Z-axis - Two motor speeds and 8 gear steps - Pinol shift on vertical milling head 60 mm - Fixed angular table - Coolant device in the machine base - Adjacent control cabinet - Counter holder with counter bearing for horizontal milling SK 40 Space requirement L x W x H 1200 x 1100 x 1600 mm weight approx. 1000 kg very good condition

Condition: used, Year of construction: 1984, x-travel:500 mm y-travel:400 mm z-travel:400 mm table-size:700 x 470 mm spindle turning speed range:40 - 4000 U/min feed range:02 - 3600 mm/min rapid traverse speed:4,0 m/min quill stroke:90 mm spindle taper:SK 40 control:Deckel Dialog 3 power capacity - milling spindle:3 kW total power requirement:22 kW weight of the machine ca.:1,8 t Deckel FP3 NC Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (left or Right) - Work Table: 700 x 470 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 3.0 kw Motor for Main Spindle - Deckel Dialog 3 CNC control Systems Crsb Hlwocxxypjzfeb - Seperate Power Cabin, Central Lubrication and Coolant System and Chip tray with Splash cabin

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine no. No. 2101 - 0875 Year of construction 1979 Manual travel X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps Feed X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.4 and 1.8 kW pole-changing Mains connection 380 Volt, 50 Hz Creb Hlwsr D T U Djzfjb - Infinitely variable feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Pinole displacement on vertical milling head 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant unit in the machine base - adjacent switch cabinet - Original chip tray to be placed on the machine base - Electrical diagram available Space requirement L x W x H 1350 x 1100 x 1700 mm Weight 770 kg very good condition

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine no. No. 2101 - 0778 Year of construction 1979 Manual travel X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps Feed X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.5 and 1.9 kW pole-changing Mains connection 380 Volt, 50 Hz - Infinitely variable feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Pinole displacement on vertical milling head 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant unit in the machine base - adjacent switch cabinet Cober U St Ue Hlwzforb - Original chip tray to be placed on the machine base - Electrical diagram available Space requirement L x W x H 1350 x 1100 x 1700 mm Weight 770 kg good condition

Condition: used, Slotting head for milling machine, milling head, CCCP / UDSSR STANKO type 1502 No: 200 Year of manufacture 1974 Crjbod Dk A Ae Hlwzfeb Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is like the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter - Degree scaling on the flange plate +/- 45° steplessly pivotable - This grooving head is flange-mounted in place of the normal vertical milling head (mounting in place of the vertical milling head, milling head) Weight: 42 kg good condition Slotting head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine. No. 2102 - 3322 Year of construction 1986 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps Crob Hler D T Uyowzfob Feed X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.6 and 2 kW pole-changing Mains connection 380 Volt, 50 Hz - Active digital readout for 3 axes HEIDENHAIN type TNC 113 - Infinitely variable feed in the X, Y and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Pinole displacement on vertical milling head 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant unit in the machine base - adjacent switch cabinet - Original chip tray to be placed on the machine base - Operating instructions, electrical diagram, spare parts diagram available Space requirement L x W x H 1350 x 1100 x 1700 mm Weight 830 kg good condition

Condition: used, Horizontal machining center with pallet changer STEINEL type BZ 24 FFZ with CNC control SIEMENS Sinumerik 850 M serial no. 77 year of construction 1990 Creb Hedzqmrslwzfob Travel X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm infinitely variable Tool holder ISO 40 Mains connection 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double arm gripper - Pallet changer with 4 pallets - Horizontal pallet position for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with transverse movement as Y-axis - KSS spray nozzles on the spindle ram and in the work area - Coolant device with chip conveyor under the work area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Space requirement L x W x H 9000 x 3100 x 3200 mm Weight 13.5 tons Transport dimensions on truck: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm Container loading into a 40" OT HC is possible. good condition

Condition: used, Universal console milling machine IMATEC type FU 145 No. 145658 Year of construction approx. 1986 Travel X: 850 mm, Y: 250 mm, Z: 450 mm (with measuring system) Travel X: 1130 mm Y: 300 mm, Z: 500 mm (without measuring system) Table clamping surface 1450 x 320 mm Tool holder ISO 50 Speed range 35 - 1500 rpm 12 steps Feed X, Y axis 10 to 510 mm/min. 12 steps Feed Z-axis 4 to 200 mm/min. 12 steps Csb Hlwof A Srpjzforb Rapid traverse 2.5 m/min. X, Y axis Rapid traverse 1 m/min. Z-axis Motor power 5.5 kW Mains connection 380 Volt, 50 Hz - 3-axis digital readout MITUTOYO, type FLC-1705-3 - Universal milling head can be swiveled in 2 axes - Work table with 5 T-slots 16 mm, spacing 62 mm - Coolant device in the machine base - Mechanical tool clamping via M24 threaded spindle - Horizontal milling shaft with 2 counter bearings - 5 SK 50 tool holders - Operating instructions Space requirement L x W x H 2450 x 2000 x 2160 mm Weight approx. 3000 kg good condition

Condition: used, Univ. console milling machine REMA type X 6230 serial no. 98307 year of construction 1998 Travel X: 700 mm, Y: 250 mm, Z: 380 mm Table size 1100 x 300 mm Spindle holder ISO 40 Distance spindle nose - table max. 470 mm Pinol movement 55 mm Spindle speed Vertical 45-2000 rpm 12 steps Spindle speed horizontal 32-1600 rpm. 18 steps Feed speed X and Y axis 15 - 1200 mm/min. 18 steps Feed speed Z-axis 5 - 400 mm/min. 18 steps Rapid traverse X and Y-axis 2500 mm/min. Rapid traverse Z-axis 800 mm/min Vertical spindle drive 2.2 kW Horizontal spindle drive 4 kW Feed drive 1.1 kW Mains connection 400 Volt, 50 Hz - 3-axis digital readout SINO, type SDS 6-3V - Vertical milling head can be swiveled manually in two planes with drilling quill - Vertical milling head can be moved manually W-axis = 400 mm (4th axis) - Work table can be rotated +/- 45°, with 4 T-slots 14 mm, spacing 80 mm - Mechanical tool clamping via threaded spindle M16 Crsb Hlwzjunc A Iofsb - Manual central lubrication via hand pump - Coolant device in the machine base - recirculating ball screws - Horizontal milling shaft with counter bearing - Halogen machine light - Switch cabinet fixed to the machine Space requirement L x W x H 2000 x 1700 x 1800 mm Weight 2500 kg Very good condition