Condition: good (used), Year of construction: 2001, Functionality: fully functional, Technical details grinding length 600 mm grinding width 330 mm workpiece height - mm Control Siemens FM-NC grinding spindle drive 12,5 kW total power requirement 20 kVA weight of the machine ca. 5 t dimensions of the machine ca. 3200 x 2590 mm Additional information Precision, surface and profile grinding machine Equipment: CNC control Siemens FM-NC SIMATIC OP 27 Electronic hand-wheel Grinding wheel flange for planar contact Creep feed device Ball screw X-axis Coolant system with paper belt filter, 180 liters, coolant pump 75 l/min. Oil mist extraction device, weight 55 kg Housing in stainless steel execution included, costs new as an machine option Crjlnowhvhae Hbhasb EUR 15.000,- Electromagnetic clamping plate 600 x 300 mm, height 81 mm, weight approx. 100 kg Separate control cabinet Machine documentation Technical data: Grinding area max. 600 x 330 mm [Working areas] X-axis 800 mm Y-axis 370 mm Z-axis 330 mm Distance table-spindle center 600 mm Table height 900 mm Table load 450 kg [Grinding wheel] Grinding wheel diameter 300 mm Max. width 50 mm Grinding wheel bore 76.2 mm Speed 100 - 4000 rpm. [Speeds] X-axis up to 35000 mm/min. X-axis 2-30000 mm/min. Space requirement length x width 3200 x 2590 mm Machine height 2850 mm Transport height 2350 mm Machine weight 5000 kg

Condition: good (used), Year of construction: 1988, 6-spindle-automatic lathe brand: TORNOS Colevwmb Den Hbhajrb type: SAS16 new in: 1988 equipped with: sub spindel threading attachement flushing system chip conveyor automatic baroader IEMCA PRA 40/31/P

Condition: used, Year of construction: 1999, suction capacity: 5,600 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which results in high efficiency of the device. Sinbran filter cartridges. SINBRAN filter cartridges are environmentally friendly and therefore suitable for use in the pharmaceutical and food industries. They are suitable for separating aerosols of organic materials, such as those created during laser cutting operations. SINBRAN filter cartridges combine the advantages of membrane filters with the advantages of rigid body filters: Large filter surface requiring minimal space. High mechanical load capacity, very long life cycle, low pressure drop and high filtration efficiency is a new approach to dust removal that achieves impressive filtration results, even in particularly difficult applications. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters it causes minimal pressure loss. Short compressed air pulses during the filtration process ensure effective filter cleaning. 7.5 Kw fan Efficiency 5600 m3/h Sinbran filter inserts 12 pcs. Negative pressure 3000 Pa Celn Hbevxtkzehajrb

Condition: good (used), Year of construction: 1998, Control: Fidia CXR with handwheel (new in 2017!) Working areas X-axis: approx. 5,000 mm Y-axis: approx. 2,500 mm Z-axis: approx. 1,250 mm Clamping table Length x width x height: approx. 5,600 x 2,740 x 520 mm (cast iron) Table load: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Milling spindle (new!) Type: HSD ES951 Adapter: HSK63F Cooling: Air Clamping: Pneumatic Maximum speed: 24,000 rpm Power: 10 kW Torque: 8.7 (S1) and 10.5 (S6) Suitable materials: Wood, plastic Aluminum Linear axis drives X, Y, and Z axis feed rate: up to 20 m/min X, Y, and Z axis acceleration: up to 1.5 m/s2 Connection data Croln Hbjh Dyvgjhajb Connected load: approx. 28 kW Back-up fuse: 63 A Dimensions, weight Machine space requirements: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg Machine condition Fully functional, regularly maintained by the machine manufacturer. Machine is no longer powered and no longer has a housing! Available immediately!

Condition: good (used), Year of construction: 1993, machine/vehicle number: 190238, With motorized backgauge, numerical control, manual bending beam lowering, and foot switch. The machine will be repaired, tested, and cleaned by a specialist and will then be fully functional. A test run will be performed. Sheet width: 3020 mm Steel sheet thickness: 2.0 mm Aluminum sheet thickness: 3.0 mm Stainless steel sheet thickness: 1.5 mm Backgauge: 1000 mm Color: green Total power requirement: 400 V Space requirement: 3800 x 1000 mm Cjlnov Tvipj Hbhajrb Machine weight: 4500 kg Upper beam stroke: 200 mm Without roller shears/ Opening width: 200 mm

Condition: used, Technical details: Csln Hbeu S H R Njhasrb width: 630 mm depth: 500 mm height: 805 mm weight of the machine ca.: 300 pro Stück kg 2 pieces available (price per piece) to DIN 650: T-slot width a= 28; h= 50; b= 48; c= 21 mm, T-slot spacing 160 mm Foot clamping slotted hole Ø 32 x 330 mm *

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Technical details x-travel 800 mm y-travel 500 mm z-travel 500 mm Control Siemens 828D total power requirement 25 kVA weight of the machine ca. 6,25 t dimensions of the machine ca. 3887 x 2256 x 2917 mm Additional information CNC control: Siemens 828 D Machine was put into operation in 2022. Machine with new milling spindle (replaced in December 2024). Table -Table size (LxW) 900x520 mm -Working height (table/floor) 870 mm -T-slots, number 5 pieces -T-slots, width 16 mm -T-slots, distance 80/100 mm -max. Table load 450 kg Travel paths -X-axis 800 mm -Y-axis 500 mm -Z-axis 500 mm Spindle -Mounting DIN 69871 40 ISO -Spindle speeds 10000 rpm -Spindle motor 10.5/15.8 kW Crelewhvf Een Hbhasb -Spindle torque 50.0/75.4 Nm -Distance spindle nose/table 100-600 mm Feed rates -X-axis 10 m/min -Y-axis 10 m/min -Z-axis 10 m/min -Rapid traverse X-axis 30 m/min -Rapid traverse Y-axis 30 m/min -Rapid traverse Z-axis 30 m/min Tool changer -Type Arm type -Tool stations 30 stations -Max. tool -0 75/125 mm -max. tool length 300 mm -max. tool weight 8kg Coolant system -Pump output 155 l/mm -Tank capacity 496 liters Chip flushing system -Pump motor 850 W -Pump output 130 l/min -Pump pressure 4 bar Drive performance - Main drive motor output 10.5/15.8 kW - X-axis drive 2.64 kW - Y-axis drive 2.64 kW - Z-axis drive 5.4 kW Connected load 25 kVA Machine dimensions -Length without chip conveyor 2652 mm -Length with chip conveyor 3887 mm -Depth/width 2256 mm -Height 2917 mm Machine weight 6,250 kg Equipment: -CNC control Siemens 828D including ShopMill with 10.4 display -Portable electronic handwheel -Cooling through the spindle (IKZ) 20 bar with built-in coolant tank and cartridge filter system 40 microns -10,000 rpm belt drive spindle ISO 40 -Precision spindle, dynamically calibrated -Automatic 30-way tool changer ISO 40 (double arm version) -Precision ground work table with 5 T-slots, size 16 -C3 precision ball screws, pre-tensioned in all 3 axes -Servo motor with direct drive for all axes -INA linear guides (roller guide) in all 3 axes -Automatic lubrication (oil) of the guides -Telescopic guide covers for all Axes -rear 4 bar chip flushing system -coolant system with integrated coolant tank and 4 cooling nozzles (3x water/1x air) -hinge - chip conveyor system with side discharge -full enclosure with roof and sliding doors with large window areas -light bar on the roof to display the machine status -work area lighting -side opening safety windows for easy machine cleaning -side, pivoting control panel -switch cabinet with heat exchanger -preparation for 4th axis, wiring etc. without servo drive -rigid thread cutting without compensating chuck (ragid tapping) -low voltage circuit -EMC and safety module -machine in accordance with CE -machine documentation / German-electronic

Condition: used, Year of construction: 1989, Used machine Year of construction 1989 Technical data: 4-spindle drill head with press-fit bracket Pitch : 52/5.5/32 mm 7-spindle hole drilling head 32 mm pitch with locking pin incl. drilling depth adjustment incl. stop extensions incl. folding stops Creln Hbhsv S Nn Neaeb Connection: 380 V Dimensions: 550x750x790 mm without stops Location:Hesse Availability: Immediately

Condition: used, Year of construction: 2007, suction capacity: 3,300 m³/h, negative pressure: 3,500 Pa, Dust extraction, welding fume extraction by Keller. For collecting and separating dust, such as fine particles of metal oxides and fumes generated in thermal processes such as joining, separation or surface treatment using laser, plasma or gases. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, soda blasting, grinding plaster, cement, plastics and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. Fan with a power of 5.5 kW. Capacity 3300 m3/h Negative pressure 3500 Pa Celn Hbhjvxt Eljaorb Inlet diameter - 400 mm Electrical documentation included. Dimensions of the device: height - 3.30 m total width - 1.35m x 1.15m stock number: 0953

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details turning diameter 320 mm turning length 810 mm control FANUC MSX-701 / MAPPS 3C total power requirement 89 kVA kW weight of the machine ca. 8,3 t Additional information CNC high-performance CNC turning and milling center The machine has been running with oil. Condition: Very well maintained, the machine has recently been checked by a service technician with geometry measurement. We can send you with WhatsApp videos of the machine check up of our service technican. The machine has received a new Mapps unit with the latest version Mapps 3C including USB connection. Costs approx. EUR 8-10,000 including installation. Equipment: CNC control FANUC MSX-701 / MAPPS 3C Bar loader LNS SPRINT 552-565 Collet chuck HAINBUCH SPAN-TOP 65 on main and sub-spindle Basic range of standard turning holders and driven holders Cjlewhvdzjn Hbhajrb Fire extinguishing system made by Siemens Chip conveyor Coolant system with high-pressure filter system Workpiece unloading device with gripper Tool pre-setting device on spindle 1 and 2 Technical data: Swing diameter over bed 800 mm Swing diameter over cross slide 800 mm Maximum turning diameter 320 mm (interference with turret cover) Standard turning diameter 200 mm Maximum distance between the centers 1130 mm Maximum turning length 810 mm Maximum workpiece size 300 mm Travels: X-axis turret 1 and 2 210/210 mm Y-axis 100 mm (+65/-45 mm) Z-axis turret 1 and 2 810/810 mm B-axis 920 mm (headstock 2) Main spindle: Maximum speed 5000 rpm. Number of speed ranges 2 Drive power 25/22 kW (30 min/continuous operation) Maximum bar diameter 65 mm Spindle bore 73 mm Spindle diameter in front bearing 120 mm Spindle mount JIS A2-6 C-axis resolution 0.001 degrees Sub-spindle: Maximum speed 5000 rpm. Number of speed ranges 2 Drive power 25/22 kW (30 min/continuous operation) Maximum bar diameter 65 mm Spindle bore 73 mm Spindle diameter in front bearing 120 mm Spindle mount JIS A2-6 C-axis resolution 0.001 degrees Feed drives: Rapid traverse turret 1 X/Y/Z 30/20/50 m/min. Rapid traverse turret 2 X/Z 30/50 m/min. Tool turret: Number of turrets 2 Number of tool stations per turret 16 Of which 16 prepared for driven tools Shaft cross-section for turning tools 20 x 20 mm Maximum shaft diameter for boring bars 32 mm Turret switching time (1 station) 0.18 s Maximum speed of the driven tools 6000 (12000) rpm Drive power for driven tools 7.5/5.5 kW (5 min/continuous operation) Dimensions, weights: Installation area without chip conveyor 3930 x 2721 mm Installation area with chip conveyor, ejection on the right 5120 x 2721 mm Total height (without automatic door) 2320 mm Net weight 8300 kg

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Technical details x-travel 2000 mm y-travel 2300 mm z-travel 1000 mm Control Siemens 840 D total power requirement 153 kVA weight of the machine ca. 67,0 t dimensions of the machine ca. 9,0 x 7,5 x 5,1 m Additional information Used universal machining center for turning, drilling and milling. Large machine in portal design with fixed portal and movable base with integrated rotary table / turning station and pallet holder. New price EUR 1.327.160,- (without service) The machine can be demonstrated and tested under power/chip. Technical data: Control: Siemens 840 D Max. workpiece diameter: 2000 mm Distance spindle nose to pallet surface min. 150 / max. 1120 mm Pallet changer: 2-way pallet changer with set-up station, pallet buffer space and rotating pallet transfer station Pallet size Diameter 1250 x 200 mm and Diameter 1600 x 230 mm Pallet clamping surface designed with 12 star-shaped T-slots 22H9 Pallet center hole diameter 100 mm H6 Maximum permissible pallet load 3000 kg Rotating spindle speed range: 1 - 400 rpm Rotating spindle drive power: 70 kW Drilling and milling spindle: HV swivel head as B-axis by 90° freely programmable Water-cooled AC main drive as motor spindle Speed range of drilling and milling spindle: 1- 12000 rpm Drive power of drilling and milling spindle: 40 kW (S1-100%) Cjlswhvapjn Hbhasrb Maximum spindle torque 137 Nm Hydraulic weight compensation for the spindle slide Spindle positioning per degree (M19) Main spindle bearing diameter 70 mm Cutting performance: Solid drilling diameter 50 mm in C45 Tapping M 42 in C45 Milling 400 cm³/min. in C45 Milling 3000 cm³/min. in aluminum Travel: X-axis: 2000 mm (cross slide travel) Y-axis: 2300 mm (longitudinal table travel) Z-axis: 1000 mm (spindle slide stroke) Carousel turning station with C-axis operation and holder for pallets with diameters of 1250 and 1600 mm Double main drive, each with an integrated water-cooled main drive motor and automatically switching gearbox with transmission ratio 1:4 Main drive 70 kW (S6-60%) Maximum speed 400 rpm. Maximum torque 25000 Nm Main bearing designed with 845 mm diameter axial bearing and 200 mm diameter radial bearing (2-way) Technical data C-axis drive: Number of positions 360,000 Measuring system directly via ROD Positioning accuracy +/- 0.001° Repeatability accuracy +/- 0.0005° Maximum speed 15 rpm

Condition: good (used), Year of construction: 2006, Functionality: fully functional, Technical details turning diameter 570 mm turning length 1500 mm control Siemens SINUMERIK 810D weight of the machine ca. 5,2 t dimensions of the machine ca. 6648 x 2735 x 1973 mm Additional information Centre height 570 mm Centre height over flat track 280 mm Diameter over bed 570 mm Diameter over cross slide 365 mm x-axis 345mm x-axis feed max. 2500 mm/min z-axis feed max. 5000 mm/min x-axis rapid traverse max. 5000 mm/min z-axis rapid traverse max. 10000 mm/min x-axis feed force 7,100 N Crslnewhu Urj Hbhaob z-axis feed force 12500 N Feed control 0% - 120% max. workpiece weight from front edge of clamping device 400 kg with tailstock 1000 kg with tailstock and 1 steady rest 1300 kg with tailstock and 2 steady rests 1600 kg Main spindle: Spindle / bore / spindle Ø in the front bearing DIN 52027 - A 8 / Ø62 / Ø100 Inner taper of the main spindle metric 70 Drive power 25 kW 60%; 20 kW 100% ED Torque max. 1800 Nm / 1400 Nm 2 gear stages Speed range 3-2500 rpm Speed range gear step 1: 3-500 rpm Speed range gear step 2: 15-2500 rpm Tool: SAUTER 8-station turret: Ø40 Turret no.: 0.5.480.516-089768 ComNo. 06.09216 Tool holders DIN 69880 / Ø50 Lathe tool - cross-section according to DIN 770 h x w 32 x 25 Tailstock: Quill diameter 100 mm Inner taper quill MK 5 Quill travel 190 mm Cooling: frequency controlled 1 bar/10 ltr - 4 bar/20 ltr; 2-stage programmable Dimensions: max. machine size (without chip conveyor) 4300 x 2131 x 1973 mm Space requirement (incl. chip conveyor) 6648 x 2735 x 1973 mm Accessories: 3-jaw chuck, diameter 250 mm chip conveyor, make KNOLL, built 2015 fixed steady rest moving steady rest various tool holders

Condition: used, Year of construction: 2001, Functionality: fully functional, Technical details turning diameter 570 mm turning length 1500 mm control Siemens Sinumerik 810 D spindle bore 62 mm spindle turning speed - stepless 3 - 2500 U/min transmission ratio 2 feeds - longitudinal max. 10000 mm/min feeds - cross max. 5000 mm/min tailstock quill taper MT 5 main drive motor 20/30 kW Dimensions (LxWxH) 4,10 x 2,16 x 1,98 m total power requirement 35 kVA weight of the machine ca. 5,3 t Additional information Crsln Hewhu T Ujbhaob The machine was used in 1-shift operation. Equipment/accessories: * CNC control SIEMENS Sinumerik 810 D * Tool/swivelling holder Parat size 3, Sandvik Capto C4 * Boring rest * Full clamping cylinder Forkardt OKRJ 120 for operating power chucks * Hydraulic unit Hydac * Steady-rest, diameter 20-315 mm * 3-jaw manual chuck, diameter 315 mm * Coolant device * Chip conveyor

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Crjln Hbewhu Tuehasb Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21. If you are interested, the machine can be demonstrated under power/chip.

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Technical details x-travel 3500 mm y-travel 2200 mm z-travel 1200 mm Control Heidenhain iTNC 530 total power requirement 45 kW weight of the machine ca. 48 t Additional information Csln Hbjwhu S Rshasrb The milling spindle was renewed / overhauled in November 2024. Operating hours 15918 Travels: X/Y/Z 3500/2200/1200 mm Table clamping area 3000 x 2000 mm Rapid traverse X/Y/Z 30 m/min. Max. spindle speed 20000 rpm Tool holder HSK A 63 Power 30 kW Torque 80 Nm Equipment: Heidenhain iTNC 530 CNC control Universal milling head with B axis -110°/+110° and C axis -200°/+200° 32-ATC tool changer Coolant through spindle 24 BAR THREE-DIMENSIONAL PROBE HEIDENHAIN TS 460

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, Technical details x-travel 750 mm y-travel 400 mm z-travel 500 mm Control Heidenhain TNC 320 spindle turning speed range 3800 U/min transmission ratio 2 tool taper 40 SK table-size 1500 x 670 mm table surface area 1270 x 320 mm table load 600 kg spindle drive 5,5 kW distance spindle /table 100-600 (min.-max.) mm distance spindle center to column 526 mm quill travel 120 mm weight of the machine ca. 2,2 t dimensions of the machine ca. 3,10 x 2,45 x 2,50 m Additional information CNC universal milling machine comes from a swiss company. Year of production: 2010 Cjln Hbswhu Swshaerb First machine installation: 2012 Equipment: * 3-axes CNC-control Heidenhain TNC 320 * Additional handwheels for manual operation * Manually swiveling milling head (45 /90 deg.) with drilling quill * Central lubrication * Coolant equipment * Documentation/manual Maximum machining capacities: Drilling mild steel 40 mm diameter Tapping M 36 Boring 120 mm

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, Technical details x-travel 290 mm y-travel 150 mm z-travel 330 mm table surface area 210 x 600 mm tool taper SK 40 total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a from a training workshop. Equipment: Coln Hbowhu R Hshaorb Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment Technical data: Longitudinal table movement, motorised / manual 290/300 mm Headstock transverse movement, motorised / manual 150/160 mm Vertical support movement, motorised / manual 330 / 340 mm Work spindle drive 1.5/1.9 kW Number of milling spindle speeds 16 Speed range 40 - 2000 rpm. Horizontal milling spindle Tool holder Standard taper 40 Feed range infinitely variable 5 - 500 mm/min. Creep speed 4 mm/min. Rapid traverse 1200 mm/min.

Condition: good (used), Functionality: fully functional, machine/vehicle number: S/N° 8070, Two DECKEL FP 2 machines are available. Machine in green has the serial number 8070 Stock No. 2372 Technical details x-travel 400 mm y-travel 190 mm z-travel 325 mm Table surface 700 x 240 mm Tool holder SK 40 Spindle speeds 40 - 2000 rpm Feed range 8 - 400 mm/min Motor power 2.2 kW Machine weight approx. 1.2 t Equipment and accessories: 3-axis digital display Feed and rapid traverse in 3 axes Vertical + horizontal spindle Adjustable angle table Vertical milling head can be swiveled Machine in blue/gray has the serial number 2906 Stock No. 2371 Technical details x-travel 500 mm y-travel 170 mm z-travel 315 mm Table surface 700 x 280 mm Tool holder SK 40 Spindle speeds 40 - 2000 rpm Feed range 8 - 400 mm/min Motor power 2.2 kW Machine weight approx. 1.2 t Equipment and accessories: 3-axis digital display Mitutoyo Rigid angle table Vertical + horizontal spindle Vertical milling head swivels Feed and rapid traverse in 3 axes Celn Hewhu N Njbhaorb Machine lamp

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Technical details grinding length 1250 mm grinding width 600 mm Control SIEMENS LC 200 / TP277 weight of the machine ca. 7,7 t Additional information CNC precision, surface and profile grinding machine CNC control SIEMENS LC 200 / TP277 Dresser - straight Table load maximum to the magnetic chuck 1200 kg Drives: X-axis drive hydraulic Y and Z-axis drive with servo drive and ball screw measuring system: X-axis rotary with rotary encoder Y and Z axis linear scale traverse paths X axis 1400mm Y axis 600mm Z axis 600mm Grinding length 1250 mm Grinding width 600 Crsln Hbhswhu Nceaob Distance between table and spindle center 700 mm Grinding wheel diameter 400 mm Grinding wheel width 100 mm Grinding wheel bore 127 mm Note: Machine will be sold without a coolant device.

Condition: good (used), Year of construction: 1995, Functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Celn Hbhowhu Irsaerb Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: good (used), Year of construction: 1992, Functionality: fully functional, Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Equipment: Coolant system 500 liters with paper belt filter 4 grinding stone (3 of them unused) Crjln Hbewhu Ifjhaob Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Technical details workpiece diameter 800 mm workpiece weight 1000 kg workpiece height 480 mm Control Siemens 840 Di total power requirement 15 kW weight of the machine ca. 6000 kg dimensions of the machine ca. 2750 x 2590 x 2310 mm Accessories coolant equipment with paper band filter Additional information Machine comes from a plant closure Equipment: CNC control SIEMENS Sinumerik 840 Di Electromagnetic clamping plate Frequency converter (inverter) for changing the motor speeds Coolant system with paper belt filter Grinding wheel with flange Lighting of the work area Technical data: Largest grinding diameter 800 mm Rotary table diameter 600 mm Rotation speed 15-150 rpm Cross travel 550 mm Cross speed adjustable 0-8 m/1 Grindable height vertically 480 mm Grinding wheel speed 1500 rpm Grinding wheel dimensions diameter 400x60x127 mm Grinding wheel motor power 11 kW Crelnjwhu H Io Hbhasb Hydraulic motor power 4 kW Max. table load 1000 kg

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Technical details cutting diameter 730 mm saw band length 9195 x 67 x 1,6 mm cutting width 830 mm Control Kasto total power requirement 30 kW weight of the machine ca. 11,6 t dimensions of the machine ca. 4800 x 2600 x 2870 mm Additional information Heavy-duty, high-performance band saws with a horizontally and parallel-traversing saw blade for cutting solid material, profiles, and pipes of all qualities, including difficult-to-cut materials such as titanium, Hastelloy, Inconel, etc. The optimal use of carbide or bi-metal saw blades was consistently considered during the development of these machines. Cutting range Cutting diameter: 730 mm Cutting width: 830 mm Saw blade size: 9195 x 67 x 1.6 mm Total power requirement: 30 kW Machine weight: 11600 kg Machine dimensions (L x W x H): 4800 x 2600 x 2870 mm Equipment: Carbide package With driven heavy-duty roller conveyors for the infeed and outfeed sides. Roller conveyor on the inlet side, dimensions (LxWxH) 4000x1000x500 mm Roller conveyor on the outlet side, dimensions (LxWxH) 3000x1000x500 mm Croln Hbjwhu Hnshaeb Weight 2000 kg Chip conveyor

Condition: good (used), Year of construction: 1986, Functionality: fully functional, cutting diameter 420 mm saw band length 6300 mm cutting width 420 mm capacity 90 degrees: square 420 x 420 mm cutting speed 20 - 130 m/min dimensions of saw-band 6300 x 38 x 1,3 mm Csln Hjwhu E Robhaorb sawing motor 4,0 kW Dimensions (LxWxH) 2420 x 3050 x 2150 mm total power requirement 6,5 kW weight of the machine ca. 2,9 t Additional information Used fully automatic band sawing machine Smallest cut-off length 6 mm Automatic feed length single 600 mm Feed length multiple 5400 mm Minimum offcut length single cut 75 mm Automatic operation 115 mm * Hydraulic saw blade tensioning * Infinitely variable cutting feed * Hydraulic material feed * Automatic feed with horizontal vice, hydraulic material clamping, infinitely variable * Coolant device * Chip conveyor * Roller-type conveyor, approx. 2500 x 500 mm

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details: max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information: The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Crsln Hbhewhuzxeaob Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW