Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. R upward and downward axis of the register. Z1 and Z2 axes of the movement to the right and left of the stops. X1 or relative X which is the axis of the movement forward and backward of a single stop. De Ia Ud Ejvxipgsnjut 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis.

Condition: excellent (used), Functionality: fully functional, Weiler Primus L + Z Rotation range: 250 x 450 Speeds: 60 - 3000 2-axis digital Heidenhain, 3-jaw Röhm 125 chuck, collet set, live center, keyless drill chuck, spindle brake, emergency stop, Multifix A with 5 holders. Dimensions: L 1.18m D 0.65m H 1.25m Condition: very good, smooth running and very good guides. Can be viewed under power, of course. Free shipping to D-88433 Schemmerhofen. Dj Iaewhugbs Ud Enout ATTENTION: Anonymous inquiries without a valid phone number will not be answered.

Condition: defective spare-parts repository (used), Year of construction: 1995, Functionality: not functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 800 mm, controller manufacturer: Fidia, controller model: M20, Offered is a used, defective 5-axis milling machine from FIDIA, model Digit 218/5 FIDIA M20 control system Year of manufacture 1995 Travel paths: X-axis longitudinal 2000 mm Y-axis transverse 1300 mm Z-axis vertical 800 mm Table dimensions clamping area 2300 mm x 1300 mm The table is not attached to the machine block, but is mounted separately Spindle speed range: 2000 – 20000 rpm Spindle power: 6 kW 2-axis fork milling head with integrated electric spindle B-axis 110 degrees C-axis 360 degrees Digitization device with K5 probe 15-station tool changer One set of collets / One set of shrink-fit adapters HSK 40 Total connected load 20 KW Documentation and circuit diagrams are available. The machine weight is stated on the nameplate as 9 tons. External panels/protective devices have already been partially removed (see pictures). The X and Y axes can be moved manually (with an Allen key) after releasing the motor brakes. Regarding the defects: A data connection from the operator terminal to the machine's main computer no longer exists. Therefore, the machine cannot function. The exact nature and extent of the damage to the machine cannot be specified. This machine is suitable for skilled personnel who are able to carry out potentially extensive repairs. Ds Ia Ujwhuf Rod Ensut Alternatively, equipping it with new components could be a solution. Keyword: retrofit. This machine is only sold to tradespeople with existing expertise in all aspects of mechanical engineering necessary to repair and recommission such a machine. Basic operating knowledge is by no means sufficient. To my knowledge, there has not been a crash. Until the electronics failed, all axes could be moved, the milling spindle was running, and the tool changer worked. During my ownership, the machine was only used for simple drilling work, so I cannot provide any information about the achievable dimensional accuracy in milling operations. The machine has been unusable for several years. Since I lack the resources and prospects, it is now being offered for sale. The machine is being sold as defective. The exact extent of the defects is unknown. For refurbishment or as a spare parts carrier. The seller's liability for simple negligence is excluded. Purchased as seen and excluding any warranty, liability for material defects, or guarantee claims. The seller is not liable for indirect damages, lost profits, or other financial losses of the buyer. Extended retention of title: The machine remains my sole property until full payment is made. By purchasing the machine, the buyer expressly agrees to this. The machine is available for inspection and testing in 28857 Syke.

Year of construction: 2024, Condition: new, 5 axis double head sawing machine FOM INDUSTRIE KEOPE E5 6.6 m Duo Ied Izq Hoa Ud Enet Machine in stock Equipment: - No.2 carbide tungsten saw blades Ø 600 mm - Minimum cutting capacity between two heads: 470 mm (with heads at 90°) - Maximum cutting capacity between two heads: 6.6 m - No.4 vertical vices and No.2 horizontal (for step-by-step operation) - Micro-drop pure oil blade lubrication system - Set up for the extraction of chips and fumes - Blade motors, three phase 5 HP (3.7 kW) - 230/400 V- 50Hz. Blade rotation speed 2400 RPM - Head rotation between 22.5° and 140° (Y and Z axes) with electronic control (vertical axis) - Internal blade inclination between 90° and 45° (W and U axes) with electronic control (horizontal axis) - Handling of mobile head (X axis) with electronic control - Mobile head max. speed 25 m/min. - Hydraulic saw blade feed (adjustable blade exit speed - quick return) - Profile lifting kit - Loading roller conveyor length 2.2 m, width 400 mm (on mobile head) - No.3 intermediate pneumatic retractable support - Chip conveyor belt - Label printer - FSTCut software - Software for special cut-off (beyond measure and super minimum) and profile bevel cut for 45° cuttings - Step-by-step cutting software, complete with 1 extra surface on fixed head, 90° cuts, two-hand control - Vacuum cleaner

Condition: reconditioned (used), Year of construction: 1995, total height: 3,105 mm, table length: 940 mm, table width: 650 mm, pressing force: 50 t, overall weight: 9,100 kg, year of last overhaul: 2019, space requirement length: 2,407 mm, space requirement width: 1,278 mm, controller manufacturer: BRUDERER, controller model: B2, worktable length: 940 mm, CONTROLS .. PLC BRUDERER B2 PRESS DESIGN .. openings in uprights: yes .. table cushion: no .. opening in table: yes PRESS FORCES .. total force (nominal): 50 to PRESS TABLE .. table surface (left-right): 940 mm .. table surface (front-back): 650 mm .. opening in bed (left-right): 760 mm .. opening in bed (front-back): 100 mm Dus Ia Uewglz Hed Enjt SLIDE .. table surface (left-right): 810 mm .. table surface (front-back): 420 mm SLIDE (MECHAN. PRESS) .. slide adjustment: 64 mm .. stroke min.: 16 mm .. stroke max.: 51 mm .. stroke rate (min.): 100 /min .. stroke rate (max.): 1120 /min STRIP-FEEDER .. feeder type: roll feeder DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2407 mm .. space requirements -front/back-: 1278 mm .. total height: 3105 mm .. total weight approx.: 9100 kg

Condition: good (used), Year of construction: 2010, Roller diameter: 315 mm Bending speed: 4.6 rpm Working height: 1250/1100 mm Shaft length: 260 mm I-steel - edgewise: 220x30 mm I-steel - flat: 130x20 mm Tube diameter: 100x2.5 mm Square bar material: 140x80x8 mm Angle steel: 100x100x12 mm Total power requirement: 12.5 kW De Ia Uowglwzsd Ensut Machine weight: approx. 2,800 kg Space required: approx. 1,650x1,700x1,800 mm Equipment: - 3 driven rollers

Condition: good (used), Year of construction: 1984, Control Phillips 432 Spindle SK 40 Speed range 20-5000 1/min Travel X800mm Y500mm Z600mm Duj Ia Udsr A Di Sj Enot 4-axis rotary table Tool storage 30 pcs Spindles horizontal and vertical, automatic change by means of M function Chip conveyor

Condition: good (used), Functionality: fully functional, Voest DA 160 Duj Ia Udowhufwj Enot Rotation range: 330 x 600 Speeds: 30 - 2500 Multifix A with 5 holders, 3-jaw chuck 160, new, keyless chuck, live center, spindle brake, emergency stop. Condition: Good, guides and smooth running very good. Dimensions: L 1.45m D 0.8m H 1.38m Can be inspected under power, of course. Free shipping, D-88433 Schemmerhofen ATTENTION: Anonymous inquiries without a valid phone number will not be answered.

Year of construction: 1974, Condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Duo Ijq A Icqja Ud Enot

Condition: excellent (used), Year of construction: 2019, Bandsaw MACC SPECIAL 411 CSO, year 2019 Condition: very good - Sawing machine with cutting band falling controlled by hydraulic - Vice closure operated manually - Manual head return - Vertical rotation on bolt with adjustable tapered bearings without backlash - High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw - Blade tensioning obtained per manual rotation of the handwheel and guaranteed by microswitch - Vice with device for quick approach - Accident-preventing devices on flywheel casing, on control handle, on blade, and external guard - Hydraulic cylinder for controlled descent - Cutting thickness 1,2 mm - Cutting range 45° left 60° right Ds Iaopmaubj Ud Enout - Adjustable end stop for cuts of the same size - 24 V low voltage control - 0,06 kW power-driver pump for band cooling - Pedestal with chip collection tray and removable tank for coolant - Inlet conveyour

Condition: used, Year of construction: 2013, table length: 2,000 mm, pressing force: 160 t, controller manufacturer: SIEMENS, controller model: ET 200 S, worktable length: 2,000 mm, CONTROLS .. PLC SIEMENS ET 200 S PRESS DESIGN .. drive system: eccentric / crank .. openings in uprights: yes .. number of suspensions: 2 .. number of slide actions: 1 .. table cushion: no .. opening in table: yes .. feedstock transport direction: left to right PRESS FORCES .. total force (nominal): 160 to PRESS TABLE .. table surface (left-right): 2000 mm Dj Ia Udjwglzyo Enjut SLIDE (MECHAN. PRESS) .. slide adjustment: 100 mm .. stroke min.: 12 mm .. stroke max.: 120 mm .. stroke rate (max.): 300 /min .. main drive power: 51 kW Press is ready for demonstration under power Control system: SIEMENS drives, SIEMENS ET 200 S controller with Profinet UNIDOR ioController Accessories: + LORENZ servo feed + RAZIOL belt lubrication system

Condition: excellent (used), Functionality: fully functional, Machine type: Precision measuring and marking plate made of cast steel Manufacturer: MESSWELK/Germany Condition: Very good Type of offer: Used machine Technical specifications: Working area: 1510 x 1000 x 160 mm Note: With scraped surface, Including adjustable base (3 feet), Wooden cover, Including Mitutoyo digital height gauge The machine is in very good and ready-to-use condition and can be inspected and demonstrated at our premises. Dus Iowglr Eoa Ud Enst We would be pleased if you are interested in our offer. Errors, changes, and prior sale excepted.

Condition: used, Year of construction: 2008, 5-axis simultaneous DMG DMC60U duoblock Very good condition! Operating hours: 78,000 h Spindle hours since replacement: 5,900 h (2022) 2023: XZ sliding plate replaced The machine can be inspected at any time by arrangement. Control: iTNC530 Heidenhain Travel: X-600 mm, Y-700 mm, Z-600 mm B-axis: -30 / -180° C-axis: 360 ° endless Spindle mount: SK40 Spindle speed: 20 - 12,000 rpm tool magazine: 60 seats Turntable diameter: 630 mm Pallet size: 630 mm x 630 mm Internal coolant supply (IKZ): 40 bar Belt filter system: Belt filter system equipment: Measuring probe, electric handwheel, documentation, two zero-point clamping systems; Ds Iewglnyoa Ud Eneut Belt filter system: Belt filter system

Condition: good (used), Year of construction: 2004, Emcomat 17 S with CE, built in 2004 Rotation range: 340 x 700 Speeds: 30 - 2500 Multifix B with 4 holders, 3-jaw chuck 200 mm, keyless drill chuck, live center. Electrically monitored chuck guard, power-on monitor, spindle brake, splash guard, covered L + Z spindle. Dimensions: L 1.6 m, D 0.85 m, H 1.3 m Dj Ia Uswhufkod Enjut Condition: Good, guides and smooth running in good condition, fully functional. Can be inspected under power, of course. Free shipping, D-88433 Schemmerhofen ATTENTION: Anonymous inquiries without a valid phone number will not be answered.

Condition: used, Year of construction: 1996, Coil weight 3000 kg, belt width max. 900 mm, Dus Ia Ustxpdbed Enjt

Condition: new, Year of construction: 2024, Corner crimping machine FOM INDUSTRIE BAIHA L Machine in stock - Max. profile height 200 mm - Hydro-pneumatic drive - Three pneumatic clamps - Min/max height of blade position from 0 to 180 mm - Kit for profile support Duj Iaed E Eimo Ud Enst - Digital counters for profile positioning - No. 2 right tool-holder - No. 2 left tool-holder - No. 2 knives 2 mm thickness - No. 4 tools 5 mm thickness - No. 2 fold-away profile fences

Condition: used, Year of construction: 2009, installation height: 420 mm, table length: 1,600 mm, table width: 1,020 mm, pressing force: 160 t, overall weight: 32,000 kg, material thickness: 3 mm, sheet thickness steel (max.): 3 mm, controller manufacturer: SIEMENS, controller model: S7 300, worktable length: 1,600 mm, material width: 300 mm, sheet thickness (max.): 3 mm, tool height: 420 mm, CONTROLS .. PLC SIEMENS S7 300 PRESS DESIGN .. drive system: eccentric / crank .. openings in uprights: yes .. number of suspensions: 2 .. table cushion: no .. opening in table: yes .. feedstock transport direction: left to right PRESS FORCES .. total force (nominal): 160 to PRESS TABLE .. table surface (left-right): 1600 mm .. table surface (front-back): 1020 mm .. opening in bed (left-right): 1510 mm .. opening in bed (front-back): 300 mm SLIDE .. table surface (left-right): 1600 mm .. table surface (front-back): 700 mm SLIDE (MECHAN. PRESS) .. slide adjustment: 100 mm .. stroke adjustment: yes .. stroke min.: 12 mm .. stroke max.: 120 mm .. stroke rate (min.): 30 /min Dus Iajwglztj Ud Enjt .. stroke rate (max.): 300 /min .. main drive power: 51 kW TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 420 mm STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 300 mm .. sheet thickness max.: 3 mm DIMENSIONS / WEIGHTS .. total weight approx.: 32000 kg ATTACHMENTS (PRESSES) .. 2-hand engagement: yes .. acc. to actual accident protection regulation: yes .. European CE standards: yes Press can be inspected under power.

Condition: like new (used), Year of construction: 2021, Intended for DMG MORI CLX 450 Due Iaewglmvs Ud Enst (never installed, also suitable for other machines) bar length up to 1,600 mm (depending on spindle length) Z-axis axial displacement 7" Touch control panel Material slide D 26 mm Material slide D 21 mm Material slide D 15 mm Material slide D 12 mm

Condition: new, Breton Power Skiving is the innovative gear manufacturing technology that combines turning and milling reducing the machining time by up to 50% . Do Ia Ud Eswglmpenout

Condition: good (used), Functionality: fully functional, Weiler Condor B in good condition Rotation range 330 x 800 Duj Ia Uewhub Eod Enet Speeds 22 - 2800 3-axis digital, 3-jaw key bar chuck 160 with multiple jaw sets, live center, keyless drill chuck, coolant system, Multifix B with 4 holders. Safety features: electrically monitored chuck guard, start-up protection, spindle brake, splash guard, 2 emergency stops. Condition: Good, guides and smooth running in good condition, fully functional. Dimensions: L 1.84m D 0.88m H 1.45m Can be viewed with power on, of course. Free shipping, D-88433 Schemmerhofen ATTENTION: Anonymous inquiries without a valid phone number will not be answered.

Condition: good (used), Year of construction: 1984, Functionality: fully functional, Pressing force 75 t , throat depth 300 mm , installation height 450 mm , table 80 x 620 mm , ram 475 x 180 mm , hydraulic multi-plate clutch , fixed table , wheel transmission Ds Iastwcqfe Ud Ensut

Year of construction: 2024, Condition: new, Double head sawing machine FOM INDUSTRIE BLITZ ALVA 500 A 6m with Ø 500mm blades. Maximum cut between the two heads: 5m In stock Due Isgkpv Dsa Ud Enst Equipment: - Two Ø 500mm tungsten carbide saw blades - Head tilting: 90°- 45°- 22.5° and intermediate angles achieved using stops - Cutting area guard kit - Two pneumatic vertical vices - Three pneumatic horizontal vices - Movable head roller table (2,5m) - Two retractable pneumatic intermediate profile support - Profile height measuring device - Spray mist blade lubrication system - Set up for the extraction of chips and fumes - Control RIGHEL - Hydro-pneumatic feeding of saw blades - First and second head angle readout kit - Software for highlighting profile sections in DXF format - Software for step-by-step cutting with two-handed command - Software for special length cuts (over and under size and super undersize) and 45° trim cut - Label printer - USB port - Ethernet for network connection - Aspiration system

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device Dj Ia Udel Dw U De Enout of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Year of construction: 1990, Condition: not inspected (used), Force: 125 tons (2x63) Speed adjustable 0-10mm/sec. Speed up: 20mm/sec Distances between columns 950x550mm Table size front 950x820mm Dj Ia Ud Esgy Hzpjneut Table size sidewise 1220x550mm Ram size see table Daylight: 700mm Stroke: 550mm Weight: 5500 kos Requested power: 18,5kw 2 precision cylinders steples adjustable strokeend

Condition: good (used), Year of construction: 1981, operating hours: 16,769 h, Center height 175 , Center width 700 , Angled position of turntable 10° , Workhead swiveling 90° , Speed range 30-675 rpm , Due Ia Ujtz T H Dsd Enjt Morse 5 , Grinding headstock _ grinding wheel diameter 400 , largest width 50 , drive power 6,25kW