Condition: good (used), Steady rests and puller for a WMW cylindrical grinding machine with a center height of 175 mm 1 x fixed steady rest, inner diameter 220 mm 3 x fixed steady rests 1 x puller with diamond dresser and fine adjustment Only available as a package deal! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Dkjbowg Rx Ds E Hrhnel

Condition: good (used), Chamber furnace, hardening furnace, tempering furnace, muffle furnace, nitriding furnace, chamber furnace, annealing furnace, annealing and hardening furnace -Manufacturer: Nabertherm, hardening furnace type M110 -Program control: ROD Type SE-402 -Usable space: 200/320/H150 mm -Heating power: 2.9 kW -Nominal temperature: 1100°C -Individual components: see photos Deb E Hswg Rv Ajrhnjkl -Dimensions: 740/580/H755 mm -Weight: 78 kg

Condition: used, Year of construction: 1999, Technical details: turning length: 1000 mm centre distance: 1000 mm swing diameter over bed: 570 mm swing diameter over face slide: 340 mm centre height: 280 mm spindle bore: Ø 66 mm revolution per minute: 1 - 625 steples U/min max. torque on the spindle: 1600 Nm longitudinal feeds:: 0 - 20 mm/U cross feed: 0 - 20 mm/U tailstock quill adjustment:: 160 mm Dksbewg E Ere E Hrhnsl tailstock quill: MK 5 mm total power requirement: 20 kW weight of the machine ca.: 3,2 t

Condition: used, Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 122085, pressing force: 150 t, overall weight: 14,000 kg, distance between side stands: 3,100 mm, working length: 3,650 mm, Darley EHP 150 36/31 CNC Press brake. Machine purchased new in 2001 and always maintained by Darley. The machine has a 6-axis stop system and is equipped with crowning. The bottom tool holder is an LVD system. The top tool holder is a Wila system. Deb E Hsway Nforhnekl Due to the purchase of a new press brake, this machine is no longer needed.

Condition: ready for operation (used), Year of construction: 1986, spindle bore: 81 mm, center width: 4,000 mm, Capacity 4000 x 725 mm Djbewifuro E Hrhnskl Bore 81 mm External electrical cabinet Bezel

Condition: good (used), Year of construction: 2005, Machining center, Cincinnati-Lamb Model CFV800SI Year of manufacture 2005 X-axis 800 mm Y-axis 540 mm Deb Eov Efzre Hrhnskl Z-axis 560 mm Spindle 20,000 rpm Very good condition and runs perfectly. Machine can be tested under power. Price greatly reduced.

Condition: good (used), Fixed steady rest Center height 225 mm Siegfried Volz Machine Tools Dkjb Ejwg Rwgs Hrhnsl Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel

Condition: good (used), Countersink, twist drill, drill bit, spiral countersink, three-cutter, twist drill -Three-edged -Diameter: 28-40 mm -Recording: MK3 Dob E Hjcbyzvsrhnskl -Type: HSS -Quantity: 37 pieces -Sale: only complete -Weight: 50 kg

Condition: good (used), Epilog Helix 24 laser: The Epilog Helix is the ideal choice for engravers who want to work with large engraving parts. With the Helix's generous engraving area of 610 x 457 x 215.9 mm (24" x 18" x 8.5"), Good condition ready for use. Dkobsvgxg Do E Hrhnjl

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, spindle bore: 20 mm, CNC Fanuc 32i MACHINE CONCEPT Number of linear axes + C axes + B axes: mm 5 + 1 + 0 Number of spindles: 2 Number of channels: 2 MAIN SPINDLE Maximum bar passage: mm 20 Number of revolutions: rpm 10,000 Power (S2 30 min/S1): kW 3.7 / 2.2 Torque (S2 30 min/S1): Nm 23.6 / 14 COUNTER SPINDLE Maximum bar passage: mm 20 Number of revolutions: rpm 10,000 Power (S2 30 min/S1): kW 2.2 / 1.5 Torque (S2 30 min/S1): Nm 7.0 / 4.8 WORK AREA Z1 stroke: mm 60 Tool holders 1 stroke X1 / Y1: mm 50 / 325 Counter spindle stroke X2 / Z2: mm 220 / 170 Rapid speed on linear axes X1, Z1, X2, Z2/Y1, Y2: m/min 32/32 Acceleration of linear axes: m/s2 5 Dsb Ejwifrko Hrhnokl TOOL HOLDERS ON SLIDE 1 Fixed turning tools: 6 Tools for frontal and secondary machining: 6/3 Driven tools: 2 + 2 Maximum number of revolutions: rpm 6,000 Power (S3 40% / S1): kW 1.3 / 0.8 Torque (S3 40% / S1): Nm 2 / 1.3 Power (S3 40% / S1): kW 1.3 / 0.8 Torque (S3 40% / S1): Nm 3.5 / 3 TOOL HOLDER ON SLIDE Y2 Fixed/motorized tools for secondary machining: 4/0 Maximum number of revolutions: rpm 6,000 Power (S3 40% / S1): kW 1.2 / 1 Torque (S3 40% / S1): Nm 2.5 / 2

Condition: used, Year of construction: 2008, Technical details: turning diameter: 315 mm turning length: 515 mm control: Siemens 810 D centre distance: 550 mm greates pass round over bed: 400 mm spindle bore: 42 mm tool taper: VDI 30 spindle turning speed - stepless: 6000 1/min rapid power traverse in X-and Z direction: 15 / 24 m/min drive capacity - spindle motor: 15,0 kW total power requirement: 25 kW Dkjb Esumzl Sj Hrhnol weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,20 x 1,35 x 1,86 m CNC lathe, turret, 12-pos., motorspindle "directdrive", tailstock MT 4, chipconveyor, collet chuck HAINBUCH, tooleye, direct measuring system, ICZ 15 bar, parts-catcher in front-door, barloader SPINNER Servoload 80-1200, no live-tooling device on turret. spindle overhauled in September 2024 - 0 hours! *

Condition: excellent (used), Year of construction: 2017, operating hours: 7,166 h, Functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, total length: 3,475 mm, total width: 3,130 mm, This machine is very well maintained and in very good condition. You can view and test this machine while it is running. Price is ex works, excluding dismantling. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 MODEL: MV4800 Production hours: approx. 7,166 hours Application type: EDM wire cutting Machine type: Wire EDM machine Technical specifications - Mitsubishi MV4800 General information Width: 3130 mm Depth: 3475 mm Height: 2815 mm Weight: 5700 kg Movement X-axis movement: 800 mm Y-axis movement: 600 mm Z-axis movement: 510 mm U/V movement: 200 (+/-100) mm Workpiece Diameter over bed: 1250 mm Diameter over carriage: 1020 mm Workpiece diameter: 505 mm Max. table load: 3000 kg Worktable External length: 1080 mm External width: 780 mm Dkjb E Hrovdu Hzshnol Price significantly reduced.

Condition: good (used), 8-station tool turret, manually rotatable, for retrofitting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel Djb Eswg Rv Ne Hrhnekl

Condition: excellent (used), Year of construction: 2007, Model: AD-S2060 Serial Number: 7301072843 Technical Specifications: Press Capacity: 60T Bending Length: 2050mm Distance Between Columns: 1700mm Rapid Traverse: 200mm/sec Bending Speed: 10mm/sec Retraction Speed: 120mm/sec Stroke: 265mm Thrust: 415mm Oil Tank Capacity: 100L Length: 4375mm // Width: 2650mm // Height: 2745mm Weight: 6000kg Electrical Information: Supply Voltage: 3x400V Panel Supply Current: 25A Motor Supply Current: 15.5A Supply Cable Diameter: 4 x 2.5mm Insulation Resistance: 1 M OHM Debswifnlo E Hrhnekl Test voltage: 1000V Control voltage: 24V Frequency: 50Hz Control: ModEva 10 Tools available, please inquire in advance! Test reports available, last tested in April 2024 - passed.

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, overall weight: 325 kg, welding power (max.): 200 kVA, pressure: 65 bar, frequency: 50 Hz, Equipment: type plate available, TECNA welder in very good condition Deb Ejwifmue Hrhnokl Sold from a liquidated plant in Poland. Connected to the power supply. Ability to check

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, Options: Chip conveyor 70 bar coolant preparation Djb E Hrhowifldsnjkl 72-tool Capto C6 magazine Renishaw preparation Temperature control Performance package 5 continuous axes 8 MB memory expansion 15 bar high-pressure coolant

Condition: ready for operation (used), Year of construction: 2007, MicroStep EasyCut plasma & oxyfuel - machining area: 3000 x 1500 mm + shaft 500 mm - 1x master burner carriage for straight plasma cutting - 1x slave burner carriage for oxyfuel cutting - power source: Hypertherm plasma source HD3070 - cutting table: electro-pneumatic Deb Ejq Dkhte Hrhnokl Price exworks Wouters Cutting & Welding

Condition: excellent (used), Year of construction: 2017, operating hours: 8,500 h, Functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, workpiece height (max.): 305 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 820 mm, type of input current: AC, table width: 840 mm, overall weight: 3,500 kg, table length: 640 mm, positioning accuracy: 0.003 mm, ### Price heavily reduced ### This machine is very well maintained and in very good condition. The machine is still in production. You can view and test this machine with power on. Price is ex works, without dismantling. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 MODEL: MV 2400R MV-R Series – Power for Precision Production hours: approx. 8,000 hours Application type: EDM / wire cutting Machine type: Wire EDM machine Technical specifications - Mitsubishi MV 2400R X-axis movement: 600 mm Y-axis movement: 400 mm Z-axis movement: 310 mm Travel (X / Y / Z) in mm: 600 / 400 / 310 Travel (U / V) in mm: 150 / 150 (+/- 75) Djbjvq Rh Us E Hrhnskl Max. workpiece dimensions (W x D x H) in mm: 1050 x 820 x 305 Max. workpiece weight in kg: 1500 Table dimensions (W x D) in mm: 840 x 640 Overall dimensions (W x D x H) in mm: 2687 x 3030 x 2150 Machine weight in kg: 3500 Price greatly reduced.

Condition: excellent (used), Max. edge length 1010 mm Material thickness 1.5 mm Weight 380 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Dsb E Hrewg Ru Eehnekl DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2015, operating hours: 32,033 h, Functionality: fully functional, machine/vehicle number: 78542, overall weight: 1,100 kg, Compact, high-performance gear grinding machine for grinding running gears, with two workpiece spindles and a tailstock (optional) on a large turret. Loading and unloading of the workpiece spindle is possible. Deb E Hrhjwifipsnokl Price/details upon request. All technical specifications are subject to typographical errors/mistakes. We only sell to countries within the European Union.

Condition: ready for operation (used), Year of construction: 1951, overall weight: 9,000 kg, Oerlikon Spiromatic 2 Fiat Mammano Cutter heads Tpl 120,150,180,260 Cutter Inspection Dsb Eovfpf Us Hrhnjkl Tool cabinet with change gear and accessory

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, Options: Chip conveyor Bar feeder interface Dkeb E Hrhewifkmensl Big bore chuck Memory extension 3-color lamp HP coolant

Condition: repair required (used), - Maximum turning diameter over bed: 460 mm - Distance between centers: 1500 mm - Weight: approx. 2000 kg Dkjb E Hrjwifcpjhnjl - Digital display - Some gear stages are damaged/in need of repair

Condition: used, Year of construction: 2001, operating hours: 10,000 h, Functionality: fully functional, machine/vehicle number: 651 26 2F, total height: 2,000 mm, type of input current: AC, control voltage: 24 V, material thickness: 2 mm, The machine is in good condition and was still running until recently. However, an inspection beforehand is recommended. Dsb E Hrewifauohnjkl

Condition: excellent (used), Max. cutting length 1000 mm Material thickness 1.5 mm With safety washer Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Dkjb E Howg Rthsrhnsl DE - 44143 Dortmund - Wambel