Condition: used, Year of construction: 1978, liter capacity 1000 l Dujln Setqp H Dehu Est weight of the machine ca. 0,3 t dimensions of the machine ca. 2,8*1,5*1 m No. 4406: 1 branded coolant tank with paper band filter Made by BEDA, type 1040 year of construction 1978 approx. 1000 l volume Dimensions approx. 2750 x 1450 x 1000 mm, weight approx. 300 kg

Condition: used, Year of construction: 1972, turning length 2000 mm turning speeds 1400 U/min centre height 315 mm Duoln Shjuap Uaeu Est turning diameter 630 mm Including accessories (see pictures). The machine is in very good condition and has been well maintained. Only the rapid traverse should be checked.

Condition: excellent (used), Year of construction: 1995, Schroeder HS 2000/1.0 Manual Guillotine Shear Specifications: Manufacturer: Schröder Model: HS 2000/1.0 Year of Manufacture: 1995 Working Length: 2000 mm Doln Shuowhf Ntj Esut Cutting Thickness: 1.25 mm Collecting Tray Rear Paralleling Device via Handwheel Location: Arrives at Warehouse 54634 Bitburg - Available at Short Notice -

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius Duoln Shuewhf Hfs Ejt 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: used, Year of construction: 2012, x-travel 735 mm y-travel 650 mm z-travel 560 mm Control HEIDENHAIN TNC 530 3D table-size 800 x 650 mm rotary table 650 mm table weight 600 Kg table rotation (C-Achse) 0,001º (±360º) ° b-axis (B-Achse) -120 +120º ° workpiece dia. 840 mm workpiece height max. 500 mm rapid taverse 40.000 mm/min feed 40.000 mm/min taper HSK-A63 engine output 24 kW turning speeds 24.000 U/min Tools place 60 fach Internal cooling system 40 bar Machine on 28.008 Program on 13.900 h total power requirement 39 kW weight of the machine ca. 9.100 kg -Round table -Direct measurement system -Tool charger included -Tank with 500l paper filter -Active refrigerator cabinet -Infrared measuring probe Heidenhain -Blum laser probe meter included Duoln Shovzhb Hsu Est -Chip extractor included -Cleaning gun with 2 bar 40 l/min pump -3D quick set -HEIDENHAIN HR-410 Portable Steering Wheel

Condition: good (used), Year of construction: 1995, Circulation/rotation Ø over bed 650 mm Circulation/rotation Ø over in the recess 680 mm Rotation/rotation Ø via cross slide 420 mm Turning length before chuck diameter 200 / 1500 / 2000 / 3000 mm longitudinal slide -travel 1050 / 1550 / 2050 / 3050 mm face slide travel 420 mm max. workpiece weight kg spindle head DIN 55026 Gr. A8 mit metr spindle bore 90 mm spindle diameter in front bearing 140 mm quill stroke 200 mm diameter of quill 100 mm taper in tailstock-quill MK 5 max. chucking diameter 400 mm Largest turning tool cross-section 25x25 mm Feed force Z-axis 12500 N Feed force X-axis 9000 N Feed rate Z-axis mm/U Feed rate X-axis - mm/U rapid traverse Z-axis 7 m/min rapid traverse X-axis 5 m/min - Three-jaw chuck Ø315mm - 1x riding sock - 2x steady rest - Multifix inserts - 12x tool holder - 6x jaws with base holder Duelnjwhf Ebs Shu Eot

Condition: used, sheet width 1040 mm plate thickness 1.50 mm ST diameter of upper rolls 65.0 mm side roll diameter 90.0 mm diameter of lower rolls 90.0 mm speed 6.0 m/min voltage 400 V total power requirement 1.0 kW weight of the machine ca. 680 kg range L-W-H 2250 x 825 x 1910 mm Very well-maintained condition (!!) New price including accessories ~ €20,000 Special price upon request Pre-rolling and finish-rolling is made easy with this machine thanks to its special roller concept, extensive accessories, and robust construction. A machine for both one-off and series production = extremely versatile and cost- effective. Dujljv Td Dujn Shu Est Features: - Electromechanical three-roll bending machine - Driven by spur gear brake motor + backlash - Motor-driven upper and lower rolls - Asymmetrical roll arrangement - FASTI control unit * Adjustment of max./min. travel value of side roll - Pivoting upper roll with safety bearing - Conical bending device - 1x double foot switch * Right/left rotation of the rolls - Electrical safety device (cable) - Machine operating manual (PDF)

Condition: used, Year of construction: 1997, y-travel 850 mm z-travel 600 mm y-travel 700 mm weight of the machine ca. 3,7 t dimensions of the machine ca. 1,6x1,6x3,1 m Djln Sjwhf D Rohu Ejut

Condition: excellent (used), Year of construction: 1995, Schroeder Manual Bending Machine with Segments Specifications: Manufacturer: Schroeder Model: Ak 2000/1.0 Year of Manufacture: 1995 Working Length: 2000 mm Bending Thickness: 1.0 mm With Segments Mobile Location: Arrives at warehouse in 54634 Bitburg Deln Shuewhf Eho Ejut - Available at short notice -

Condition: used, Year of construction: 2000, table width: 850 mm, table length: 1,450 mm, installation height: 420 mm, overall weight: 24,000 kg, pressing force: 200 t, ram stroke: 200 mm, lifting height: 200 mm, worktable length: 1,450 mm, tool height: 420 mm, PRESS DESIGN .. frame design: C-frame, double sided PRESS FORCES .. total force (nominal): 200 to PRESS TABLE .. table surface (left-right): 1450 mm .. table surface (front-back): 850 mm Deln Sswhf Amohu Esut SLIDE .. slide force: 200 to .. table surface (left-right): 850 mm .. table surface (front-back): 630 mm .. stroke: 200 mm SLIDE (MECHAN. PRESS) .. slide adjustment: 110 mm .. stroke rate (min.): 30 /min .. stroke rate (max.): 55 /min TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 420 mm DIMENSIONS / WEIGHTS .. total weight approx.: 24000 kg ATTACHMENTS (PRESSES) .. light barrier: yes

Condition: used, Favretto 500 Rotary table surface grinding machine, horizontal spindle dia 500mm Duoln Sev Icmkjhu Eet electric elettrico with DRO

Condition: good (used), Grinding machine, angle grinder, turning steel grinding machine, thread drill grinding machine, milling cutter grinding machine -Angle adjustment -Grinding device -Disc: Ø 190 mm -Drive: 0.2 kW -Speed: 2800 rpm -Dimensions: 700/700/H1400 mm -Weight: 275 kg Dujln Shusb A Nihs Eot

Condition: used, Year of construction: 2004, pressure 60.0 t chamfer lenght 2600 mm distance between columns 2050 mm column arm 310 mm working feed 10.0 mm/sec return speed 61.0 mm/sec stroke 100 - 140 mm dayligth 450 mm table height 860 mm oil volume 100 ltr. Control ELGO P8822 operating pressure max. 200 bar Number of working hours ca. 2.370 h voltage 380 V total power requirement 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 3000 x 1850 x 2050 mm good / well-maintained condition (!!) Dujlnovr Hcwj Shu Eot with only approx. 2,370 operating hours current new price approx. 60.000 euros special price on request in checked conditions - machine video - ?v=PsUeM3O5wAM Equipment: - NC electro-hydraulic press brake - with ELGO NC control unit "P8822" * Input of target/actual values ??for back stop * Input of target/actual values ??for depth adjustment ` * swiveling operation, front left * manual mode selectable - NC controlled axes: Y1 + Y2 + X - NC electro-motorized back stop, on ball screws * with 4x manually adjustable stop fingers * adjustment in R+Z axis (manual) - Upper tool holder SYSTEM A (AMADA), with upper wedge crowning * 1x split set of upper tools * clamping jaws with clamping lever (quick clamp) - 1x universally rotatable MULTI V die block - 2x side-hinged doors (protective device) - 1x rear sliding door (protective device) - 2x front stable support arms - 1x freely movable foot control (on rollers - movable) - Operating instructions (PDF)

Condition: used, Year of construction: 2010, faceplate diameter 500 mm total power requirement 1 kW Duolsvylgwon Shu Est weight of the machine ca. 1 t dimensions of the machine ca. 1 m

Condition: refurbished (used), Year of construction: 2005, Functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, Charmilles Roboform 350 Year of manufacture 2005 C-frame design Fixed table with lowerable basin Travel paths: X=350 mm, Y=250 mm, Z=350 mm Max. workpiece size: X=780 mm, Y=530 mm, Z=300 mm Max. workpiece weight: 500 kg Max. electrode weight: 50 kg Distance table to chuck: 150 - 450 mm Operating current: 64 amps Best achievable surface finish: Ra 0.1 µm Integrated Accura C-axis Linear glass scales with 0.05 µm measurement resolution Including Erowa ITS 50 pneumatic chuck Machine weight (net): 2800 kg Machine dimensions (L x W x H): 1900 x 1690 x 2522 mm Dujln Showhfqqou Eet The machine has already been cleaned, serviced, and thoroughly tested. We would be happy to commission the machine for you.

Condition: excellent (used), Year of construction: 2018, operating hours: 6,373 h, Functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, LAGUN MM6 Traveling Column Milling Machine Current Specifications: Duslnjwhfi Ts Shu Ejt - Status: Used Machine - Year of Manufacture: 2018 - Condition: Very Good - Machine Hours: 6,373 Hours (Program Run) Control: - Heidenhain iTNC 530 Linear Axis Travels: - X-Axis: 6,000 mm - Y-Axis: 1,300 mm - Z-Axis: 2,000 mm Machine Table/Plate Area: - Table Size: 7,000 mm x 2,000 mm - T-Slots: 8 x 28 mm - Slot Spacing: 250 mm Basic Technical Specifications: - Performance (S1/S6): 4,000/5,000 rpm and 1,068/1,316 Nm - X-Axis Drive: Rack and Pinion Master-slave drive - Feed rate X/Y/Z: 20,000 mm/min - Rapid traverse X/Y/Z: 20,000 mm/min Equipment: Milling head: - Automatic milling head with two swivel planes and 1° indexing Performance (S1/S6): 4,000/5,000 rpm and 1,068/1,316 Nm - Tool holder SK50 - DIN 69871A - BIG PLUS - Tool changer: 60 magazine positions Horizontal and vertical tool changing, max. tool length 500 mm, max. tool diameter 250 mm, max. tool weight 20 kg Compressed air, coolant, and chip management - 20 bar internal coolant high-pressure pump, controllable via potentiometer - Internal compressed air through the spindle - Automatic hinged chip conveyor Longitudinal direction - Additional automatic hinged-belt chip conveyor in the transverse direction Other features SIEMENS main spindle motor HEIDENHAIN axis servomotors HEIDENHAIN HR 510 handwheel HEIDENHAIN linear scales in all axes Sturdy machine structure made of cast iron GG30 55 mm linear guides 2-stage ZF gearbox Electronic heat compensation on the Y-axis Hydraulic counterbalance on the Z-axis Automatic central lubrication Coolant system Control cabinet cooling Work lamp Operating manual in German

Condition: used, Vertical machining center LEADWELL MCV 610 CR CNC Fanuc 0M X 610 Y 510 Z 410 6000RPM ISO 40 The machine is in our warehouse in Gussago BS, under power Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets Delstrbb Ejn Shu Ejut X axis: 610 Y axis: 510 Z axis: 410 CNC type: Fanuc Spindle revolutions: 6000

Condition: good (used), Year of construction: 2002, DAEWOO MYNX 540 Dujln Shovn Tyueu Est Machining center CNC FANUC SERIES 21 –i M MM. TABLE 1200 mm x 500 mm RACE: X.MM.1020 Z. MM.625 Y. MM.510 DELIVERY SPEED 8000 rpm COOLING IN THE SPINDLE / HIGH PRESSURE DELIVERY MOTOR POWER 11/15KW DELIVERY CONNECTION ISO 40 MAND. TABLE MM.200-775 MACHINE WEIGHT 7,500 KG TOOL MAGAZINE 30 POS. CHIP EVACUATOR COMPLETE WITH ALL DOCUMENTATION MACHINE IN EXCELLENT CONDITION YEAR: 2002/12

Condition: used, Year of construction: 2004, sheet width 3200 mm plate thickness 0.5 - 6.0 mm cutting angle 1° 30 ° no. of strokes 14 Hub/min back stop - adjustable max. 525 mm down holder 13 Stück work height max. 800 mm Control "EASY-VIEW" oil volume 270 l voltage 400 V engine output 7.5 kW weight 6100 kg range L-W-H 4010 x 1610 x 1620 mm From a maintenance workshop - good condition (!!) According to the previous seller, it was only used sporadically. New price ~ 35.000 Euro - Inspected condition - Machine video - ?v=wyeVUYw-ZCw Features: - Electro-hydraulic swing beam shear - KNUTH "EASY-VIEW" Touch CNC positioning control * Robust backgauge with high-quality recirculating ball screws - Machine frame and cutter bar made of sturdy welded construction - The proven swing beam design enables a small cutter angle * For optimal cutting quality and minimal workpiece distortion - Hydraulically operated hold-down clamps - Electro-motorized cutting gap adjustment - Continuous cutting length adjustment for short strokes - Machine side stand with overhang - 1 long side stop, including tilting cam and mm scale - 3 front support arms - Support table including ball transfer units - Rear guard (safety doors) - Front finger/intrusion guard - 1x freely movable foot switch including emergency stop button Dolovvnd Ron Shu Eeut - "CE" marking - Operating instructions (PDF)

Condition: used, Year of construction: 2010, faceplate diameter 560 mm Duelnovylgqj Shu Eet total power requirement 1 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 m

Condition: used, Surface grinding machine LODI T 110 60 CN Duolnjwhfzve Shu Est stroke 1200x600mm Wheel-table distance 700mm Grinding Wheel dia. 400mm Magnet table The machine is visible under power in our warehouse in Gussago BS.

Condition: used, Year of construction: 2003, pressure 45.0 t chamfer lenght 2050 mm distance between columns 1600 mm column arm 300 mm stroke 150 mm dayligth 395 mm ajustment speed 100 mm/sec Djln Shetyznbju Eeut working feed 1-10 mm/sec return speed 70,0 mm/sec table width 60,0 mm table height 905 mm oil volume 150 l operating pressure 340 bar voltage 400 V total power requirement 5,5 KW weight of the machine ca. 3500 kg range L-W-H 2900 x 2100 x 2420 mm good / well-maintained condition (!!) - in checked condition - machine video - ?v=f0lMBgZD1VU Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front right * 2D graphical programming & product display * Tool & program library * including new screen (installed 11/2023 .. 1.200 euros) - CNC controlled axes: Y1 + Y2 / X / R axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - manual adjustment of the 2x stop fingers (Z axis) - AMADA-SYSTEM A upper tool clamping, including upper wedge crowning - AMADA SYSTEM A lower tool clamping - FIESSLER motor-adjustable laser protection device at the front (AKAS 160 S) - 1x freely movable foot switch - 2x front support arms - 1x set of AMADA-SYSTEM A bending tools - Rear safety device (lockable door) - Safety device on the side (pivoting doors) - Control instructions (PDF) + machine circuit diagram * Machine link: ?machineno=1008-9308356

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 87.0 kg. The AL1-2E electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continue to work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2E pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 Dueln Shust Ukr Dj Ejt (2?). Do you often notch pipes? Then the electrically driven AL1-2E pipe notcher with the 2.2 kW electric motor is just right for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electric motor pipe notching machine - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 93.0 kg. The AL1-2U electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continually work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2U pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). This pipe notcher is also suitable for notching a zinc outlet in round and rectangular metal pipes. You can notch pipe outer diameters of ø 20.0 -60.3. Dujln Shet Ukrwsu Eot Do you often notch pipes? Then the electrically driven pipe notcher AL1-2U with the 2.2 kW electric motor is just the thing for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electro-motor pipe notching machine - including notching station for zinc run-out notches - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: new, sheet width 2020 mm plate thickness 2,0 mm daylight opening 122 mit Segmente mm bending angle max. 0 - 135 ° work height max. 930 mm total power requirement von Hand kW weight of the machine ca. 1020 kg dimensions of the machine ca. 2,75 x 0,56 x 1,26 m characteristics - Segmented upper beam for a large number of bending options Doln Sjkm Rrcehu Eeut - Universally applicable bending machine for plumbing and repair shops - High upper beam for producing high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Large opening width for processing large workpieces - Robust construction in a modern design scope of delivery - Segmented upper cheek - Biegesegm. 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mm