Condition: used, Year of construction: 2004, First MCV 2000 - Vertical Machining Center with Fanuc 0i control. Dkoln Hom E Ttxokq Ajl Specifications: Table dimensions: 2200 x 1000 mm X axis travel: 2050 mm Y axis travel: 1150 mm Z axis travel: 760 mm Spindle speeds: 12.000 rpm Work feed: 8.000 mm/min Rapid speed Z-axis: 15 m/min Rapid speed X - Y axis: 20 m/min Machine in stock, fast delivery

Condition: excellent (used), Year of construction: 2001, GEKA R 8 three-roll bending machine, 2040 x 1.0 mm, used Dkjln Hswhf T Sskq Aol - Three-roll, asymmetrically mounted, made of high-strength steel - Side stand with solid welded construction - Quick rear roll adjustment - Crowned rollers to compensate for deflection - Bending length 2040 mm - Weight approx. 300 kg - Year of manufacture 2001 Location: arriving at warehouse 54634 Bitburg - Available at short notice

Condition: used, Year of construction: 2007, x-travel 1020 mm y-travel 560 mm z-travel 600 mm Control Siemens - Shopmill table-size 1.100 x 560 mm max. table load 1.000 kg tool taper BT 40 spindle tunring speed 10.000 U/min spindle drive 11 kW Djlnswhf Nge Hkq Ajkl number of tool places 24 Pos. Feed ( x / y / z) 36/36/24 m/min weight 6300 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - Internal Coolant (ICC) - Shopmill Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1978, liter capacity 1000 l weight of the machine ca. 0,3 t dimensions of the machine ca. 2,8*1,5*1 m No. 4406: 1 branded coolant tank with paper band filter Made by BEDA, type 1040 year of construction 1978 approx. 1000 l volume Deletqp H Don Hkq Aokl Dimensions approx. 2750 x 1450 x 1000 mm, weight approx. 300 kg

Condition: used, Year of construction: 1972, turning length 2000 mm turning speeds 1400 U/min centre height 315 mm turning diameter 630 mm Including accessories (see pictures). The machine is in very good condition and has been well maintained. Dkolneuap Uaj Hkq Ael Only the rapid traverse should be checked.

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Dkslnjwhf Hfo Hkq Aol Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: used, Year of construction: 2012, x-travel 735 mm y-travel 650 mm z-travel 560 mm Dslnevzhb He Hkq Ajkl Control HEIDENHAIN TNC 530 3D table-size 800 x 650 mm rotary table 650 mm table weight 600 Kg table rotation (C-Achse) 0,001º (±360º) ° b-axis (B-Achse) -120 +120º ° workpiece dia. 840 mm workpiece height max. 500 mm rapid taverse 40.000 mm/min feed 40.000 mm/min taper HSK-A63 engine output 24 kW turning speeds 24.000 U/min Tools place 60 fach Internal cooling system 40 bar Machine on 28.008 Program on 13.900 h total power requirement 39 kW weight of the machine ca. 9.100 kg -Round table -Direct measurement system -Tool charger included -Tank with 500l paper filter -Active refrigerator cabinet -Infrared measuring probe Heidenhain -Blum laser probe meter included -Chip extractor included -Cleaning gun with 2 bar 40 l/min pump -3D quick set -HEIDENHAIN HR-410 Portable Steering Wheel

Condition: excellent (used), Year of construction: 1995, Schroeder HS 2000/1.0 Manual Guillotine Shear Specifications: Manufacturer: Schröder Dsln Hjwhf Ntjkq Aekl Model: HS 2000/1.0 Year of Manufacture: 1995 Working Length: 2000 mm Cutting Thickness: 1.25 mm Collecting Tray Rear Paralleling Device via Handwheel Location: Arrives at Warehouse 54634 Bitburg - Available at Short Notice -

Condition: used, Year of construction: 1997, cutting diameter 320 mm saw band length 4200 mm Delnowhf I No Hkq Ajkl cutting width 500x300 mm total power requirement 2,2 kW weight of the machine ca. 2,5 t required space 3,0 x 2,4 m

Condition: good (used), Year of construction: 1995, Circulation/rotation Ø over bed 650 mm Circulation/rotation Ø over in the recess 680 mm Rotation/rotation Ø via cross slide 420 mm Turning length before chuck diameter 200 / 1500 / 2000 / 3000 mm longitudinal slide -travel 1050 / 1550 / 2050 / 3050 mm face slide travel 420 mm max. workpiece weight kg spindle head DIN 55026 Gr. A8 mit metr spindle bore 90 mm spindle diameter in front bearing 140 mm quill stroke 200 mm diameter of quill 100 mm taper in tailstock-quill MK 5 max. chucking diameter 400 mm Largest turning tool cross-section 25x25 mm Feed force Z-axis 12500 N Feed force X-axis 9000 N Feed rate Z-axis mm/U Feed rate X-axis - mm/U rapid traverse Z-axis 7 m/min rapid traverse X-axis 5 m/min - Three-jaw chuck Ø315mm Dkeln Hswhf Ebskq Aol - 1x riding sock - 2x steady rest - Multifix inserts - 12x tool holder - 6x jaws with base holder

Condition: used, sheet width 1040 mm plate thickness 1.50 mm ST diameter of upper rolls 65.0 mm side roll diameter 90.0 mm diameter of lower rolls 90.0 mm speed 6.0 m/min voltage 400 V total power requirement 1.0 kW weight of the machine ca. 680 kg range L-W-H 2250 x 825 x 1910 mm Very well-maintained condition (!!) New price including accessories ~ €20,000 Special price upon request Pre-rolling and finish-rolling is made easy with this machine thanks to its special roller concept, extensive accessories, and robust construction. A machine for both one-off and series production = extremely versatile and cost- effective. Features: - Electromechanical three-roll bending machine - Driven by spur gear brake motor + backlash Dkslsv Td Dusn Hkq Aol - Motor-driven upper and lower rolls - Asymmetrical roll arrangement - FASTI control unit * Adjustment of max./min. travel value of side roll - Pivoting upper roll with safety bearing - Conical bending device - 1x double foot switch * Right/left rotation of the rolls - Electrical safety device (cable) - Machine operating manual (PDF)

Condition: used, Year of construction: 1997, y-travel 850 mm z-travel 600 mm y-travel 700 mm weight of the machine ca. 3,7 t Dkoln Hkewhf D Req Ajl dimensions of the machine ca. 1,6x1,6x3,1 m

Condition: used, Year of construction: 2000, table width: 850 mm, table length: 1,450 mm, installation height: 420 mm, overall weight: 24,000 kg, pressing force: 200 t, ram stroke: 200 mm, lifting height: 200 mm, worktable length: 1,450 mm, tool height: 420 mm, PRESS DESIGN .. frame design: C-frame, double sided PRESS FORCES .. total force (nominal): 200 to PRESS TABLE .. table surface (left-right): 1450 mm .. table surface (front-back): 850 mm SLIDE .. slide force: 200 to .. table surface (left-right): 850 mm .. table surface (front-back): 630 mm .. stroke: 200 mm SLIDE (MECHAN. PRESS) .. slide adjustment: 110 mm .. stroke rate (min.): 30 /min .. stroke rate (max.): 55 /min TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 420 mm Djln Hkqowhf Ame Askl DIMENSIONS / WEIGHTS .. total weight approx.: 24000 kg ATTACHMENTS (PRESSES) .. light barrier: yes

Condition: excellent (used), Year of construction: 1995, Schroeder Manual Bending Machine with Segments Specifications: Manufacturer: Schroeder Dkoln Hkqjwhf Ehs Ajl Model: Ak 2000/1.0 Year of Manufacture: 1995 Working Length: 2000 mm Bending Thickness: 1.0 mm With Segments Mobile Location: Arrives at warehouse in 54634 Bitburg - Available at short notice -

Condition: used, Year of construction: 1991, Control Multitron CNC-PS90 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Deln Hkqswhf I Ae Aekl Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Favretto 500 Rotary table surface grinding machine, horizontal spindle Dsln Hksv Icmkeq Aokl dia 500mm electric elettrico with DRO

Condition: used, Year of construction: 2004, pressure 60.0 t chamfer lenght 2600 mm distance between columns 2050 mm column arm 310 mm working feed 10.0 mm/sec return speed 61.0 mm/sec stroke 100 - 140 mm dayligth 450 mm table height 860 mm oil volume 100 ltr. Control ELGO P8822 operating pressure max. 200 bar Number of working hours ca. 2.370 h voltage 380 V total power requirement 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 3000 x 1850 x 2050 mm good / well-maintained condition (!!) with only approx. 2,370 operating hours current new price approx. 60.000 euros special price on request in checked conditions - machine video - ?v=PsUeM3O5wAM Equipment: - NC electro-hydraulic press brake - with ELGO NC control unit "P8822" * Input of target/actual values ??for back stop * Input of target/actual values ??for depth adjustment ` * swiveling operation, front left * manual mode selectable - NC controlled axes: Y1 + Y2 + X - NC electro-motorized back stop, on ball screws * with 4x manually adjustable stop fingers * adjustment in R+Z axis (manual) - Upper tool holder SYSTEM A (AMADA), with upper wedge crowning * 1x split set of upper tools * clamping jaws with clamping lever (quick clamp) - 1x universally rotatable MULTI V die block Dkeln Hkovr Hcwsq Ael - 2x side-hinged doors (protective device) - 1x rear sliding door (protective device) - 2x front stable support arms - 1x freely movable foot control (on rollers - movable) - Operating instructions (PDF)

Condition: used, Year of construction: 2010, faceplate diameter 500 mm total power requirement 1 kW Djln Hkqjvylgwj Aokl weight of the machine ca. 1 t dimensions of the machine ca. 1 m

Condition: used, Year of construction: 1997, turning diameter 200 mm turning length 400 mm control INDEX C200-4 spindle passage 65 mm turning speeds 6.300 U/min Axis 2 weight approx. 4.300 kg In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Dslnsv Da Uks Hkq Ajkl The machine is delivered without a bar loader. Technical features: - Chip conveyor Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: used, Year of construction: 2004, sheet width 3200 mm plate thickness 0.5 - 6.0 mm cutting angle 1° 30 ° no. of strokes 14 Hub/min back stop - adjustable max. 525 mm down holder 13 Stück work height max. 800 mm Control "EASY-VIEW" oil volume 270 l voltage 400 V engine output 7.5 kW weight 6100 kg range L-W-H 4010 x 1610 x 1620 mm From a maintenance workshop - good condition (!!) According to the previous seller, it was only used sporadically. New price ~ 35.000 Euro - Inspected condition - Machine video - ?v=wyeVUYw-ZCw Features: - Electro-hydraulic swing beam shear - KNUTH "EASY-VIEW" Touch CNC positioning control Dkjln Hjvvnd Rokq Ajl * Robust backgauge with high-quality recirculating ball screws - Machine frame and cutter bar made of sturdy welded construction - The proven swing beam design enables a small cutter angle * For optimal cutting quality and minimal workpiece distortion - Hydraulically operated hold-down clamps - Electro-motorized cutting gap adjustment - Continuous cutting length adjustment for short strokes - Machine side stand with overhang - 1 long side stop, including tilting cam and mm scale - 3 front support arms - Support table including ball transfer units - Rear guard (safety doors) - Front finger/intrusion guard - 1x freely movable foot switch including emergency stop button - "CE" marking - Operating instructions (PDF)

Condition: used, Year of construction: 2010, faceplate diameter 560 mm total power requirement 1 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 m Djln Hkqsvylgqe Askl

Condition: used, Year of construction: 2003, pressure 45.0 t chamfer lenght 2050 mm distance between columns 1600 mm column arm 300 mm stroke 150 mm dayligth 395 mm ajustment speed 100 mm/sec working feed 1-10 mm/sec return speed 70,0 mm/sec table width 60,0 mm table height 905 mm oil volume 150 l operating pressure 340 bar voltage 400 V total power requirement 5,5 KW weight of the machine ca. 3500 kg range L-W-H 2900 x 2100 x 2420 mm good / well-maintained condition (!!) - in checked condition - machine video - ?v=f0lMBgZD1VU Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front right * 2D graphical programming & product display Dksln Hkjtyznboq Asl * Tool & program library * including new screen (installed 11/2023 .. 1.200 euros) - CNC controlled axes: Y1 + Y2 / X / R axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - manual adjustment of the 2x stop fingers (Z axis) - AMADA-SYSTEM A upper tool clamping, including upper wedge crowning - AMADA SYSTEM A lower tool clamping - FIESSLER motor-adjustable laser protection device at the front (AKAS 160 S) - 1x freely movable foot switch - 2x front support arms - 1x set of AMADA-SYSTEM A bending tools - Rear safety device (lockable door) - Safety device on the side (pivoting doors) - Control instructions (PDF) + machine circuit diagram * Machine link: ?machineno=1008-9308356

Condition: new, plate thickness max. 5.0 mm Dkolot Ukr Don Hkq Aol tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 87.0 kg. The AL1-2E electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continue to work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2E pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). Do you often notch pipes? Then the electrically driven AL1-2E pipe notcher with the 2.2 kW electric motor is just right for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electric motor pipe notching machine - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 93.0 kg. The AL1-2U electric pipe notcher is started at the push of a button, and the Delot Ukrwjn Hkq Ajkl pipe notcher is driven continuously. This means you can continually work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2U pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). This pipe notcher is also suitable for notching a zinc outlet in round and rectangular metal pipes. You can notch pipe outer diameters of ø 20.0 -60.3. Do you often notch pipes? Then the electrically driven pipe notcher AL1-2U with the 2.2 kW electric motor is just the thing for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electro-motor pipe notching machine - including notching station for zinc run-out notches - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: new, sheet width 2020 mm plate thickness 2,0 mm daylight opening 122 mit Segmente mm Dslekm Rrcen Hkq Askl bending angle max. 0 - 135 ° work height max. 930 mm total power requirement von Hand kW weight of the machine ca. 1020 kg dimensions of the machine ca. 2,75 x 0,56 x 1,26 m characteristics - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for producing high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Large opening width for processing large workpieces - Robust construction in a modern design scope of delivery - Segmented upper cheek - Biegesegm. 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mm