Condition: excellent (used), Year of construction: 2020, OKUMA CNC turning Centre with Y-axis, C-axis, sub spindle and live tooling Type:LB3000 EXII Year:2020 Control:OSP-P300LA Suite Y-axis:+70mm / -50mm W-axis:800mm Distance between centres::1020mm Turning diameter over bed:580mm Turning diameter over cross slide:470mm Febvdp Eswc Arhoyogb Max. workpiece diameter:410mm Spindle bore:91mm Main spindle speed:4200rpm Sub-spindle speed:6000rpm Toolchanger:12atc Machine weight approx.:6850kg With automatic doors (original from the factory) With parts catcher Option extended tool data management Smoke extraction Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Condition: used, Year of construction: 2003, spindle bore: 52 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 450 mm, rotational speed (min.): 4,000 rpm, bar diameter: 52 mm, The Colchester TORNADO A 90 lathe was manufactured in 2003. Spindle speed 4000 rpm, spindle bore 52 mm and spindle motor power 11 kW. It is equipped with a Fanuc 21 i control system, including a TORNADO MBF feeder. Fgjbowc Ac Tjvdp Eyeb

Condition: good (used), Year of construction: 2007, operating hours: 21,168 h, machine/vehicle number: 8087020322B, For sale: GILDEMEISTER Sprint 65 linear CNC lathe Model: GILDEMEISTER Sprint 65 linear Year of manufacture: 2007 Control: SIEMENS 840D Operating hours: 21,168h On-time hours: 61,362 h Technical data: - Max. revolutions of main and counter spindle: 5000 rpm - Main spindle passage: up to Ø 65 mm (bore Ø 75 mm) - Rapid traverse speeds: up to 30 m/min Equipment: - 3 turrets with 12 stations each - Turret 1 has a fault and needs to be repaired. - Tool holder VDI 30 - Drive for driven tools on all turret stations - C-axis for main and counter spindle - Y-axis on slide 3 - Counter spindle flushing with coolant flushing - Workpiece collection device - Workpiece conveyor belt - Mechanical preparation for oil mist extraction device - Electrical interface and software preparation for bar loading magazine - Synchronous operation between main and counter spindles - Hinged belt chip conveyor Fgsbvdp Eovzwm Eoyob - 2 additional inputs/outputs (4 M functions) - Workpiece counter and time calculator - Rigid thread cutting (without compensating chuck) - Software for polygon turning on slides 1, 2, 3 - Constant cutting speed - Spiral interpolation on slide 3 (thread milling) - Spindle speed monitoring system - Three-color signal light - Air conditioning for electrical control cabinet - High-pressure coolant system with belt filter and heat exchanger (capacity 980 l, pressure 20 bar, 40 l/min. for turrets 1, 2 and 3) - 3-jaw chuck for main spindle - 3-jaw chuck for counter spindle - Coolant spray gun for cleaning the work area - Differential pressure system for the counter spindle with the option of setting 2 different clamping pressures - Flushing of the upper slides with cutting fluid - The machine is powered. Price: €36,000 Location: 75334 Straubenhardt If you are interested or would like further information, please contact us.

Condition: used, Year of construction: 2000, Technical details: turning length: 400 mm total power requirement: 45 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,58 x 1,91 x 2,05 m Fgobvdpewamfme Eyeb

Condition: good (used), DROOP & REIN - SZ100 Keyseating Machine -Largest clamping diameter: 140mm -Spindle bore: 40mm -Length of keyway in one pass: 100mm -Distance between chuck and tailstock center: 350mm -Working speeds: 3 -Electric chuck guard -Weight: approx. 300kg Dimensions: LxWxH 0.9x0.6x1.5 meters / Weight: 300kg Febvdp Ejwczw Njyegb Subject to errors and omissions

Condition: used, Year of construction: 2018, WAGNER WDST 780 x 1200 CNC lathe, No. 1836322, built in 2018, 12-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system, weight approx. 6,600 kg Fgebvdswczk Asp Eyjb

Condition: used, Functionality: fully functional, machine/vehicle number: 6/0008/08085, MACHINE SPECIFICATION Cont’d Diametral threads (21) 8 - 44 DP Metric pitches (39) 0.2 – 14mm Fgobewczcfovdp Eysb Module pitches (18) 0.3 – 3.5 mod Sliding feeds, per rev. of spindle 0.0015 – 0.040” Surfacing feeds, per rev. of spindle 0.00075 – 0.020” Machine in Metric execution MACHINE EQUIPPED WITH Sino 2 axis DRO system 3 Jaw chuck Quick change toolpost Chuck guard Coolant System Lighting Rear splashguard

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, turning length: 800 mm, turning diameter over cross slide: 400 mm, turning diameter: 500 mm, Machine Details Stock No. 1105-03588 Type of machine CNC Lathe - Inclined Bed Type Make HAAS Type DS 30 Y Year of manufacture 2018 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Delivery time short term Freight basis ex works Technical details turning diameter 762 mm Fjbvdswcyy Aep Eyegb turning length 800 mm control Haas chucking diameter 254 mm hollow 76 mm swing diameter 762 mm turning speeds 3400 rpm output 407 Nm Power 22 KW Tool changer 12 VDI 40 transmission ratio 2 weight of the machine approx. 7.3 T t dimensions of the machine approx. 3.3 X 2 X 1.9 H m Additional information with manual guide (HAAS control) WIT C AXIS AND Y AXIS +LIVE TOOLS CHIP CONVOYER SUP SPINDLE

Condition: excellent (used), Functionality: fully functional, WORKING CAPACITY Platform diameter 2000 mm Max workpiece diameter 2300 mm Max tuning diameter 2200 mm Max turning height 1500 mm Max workpiece weight 15000 Kg MAIN SPINDLE Platform diameter 2000 mm Max rotation speed 160 rpm Capacity 15000 kg Max power 70 kW Cross spindle stroke (Y) 1250 mm Fobvswcyqnodp Eyogb CROSSRAIL Vertical stroke (W) 1000 mm CARRIAGE 2 Vertical stroke (Z2) 850 mm Turret positions 4 CARRIAGE Vertical stroke (Z) 1000 mm Cross stroke (X) 1250 mm EXTRA Transom cabinet Yes Machine total weight 40000 kg The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2000, Technical details: turning diameter: 500 mm turning length: 1000 mm Febvdewamfgsp Eyogb weight of the machine ca.: 7,3 t dimensions of the machine ca.: 6,5 x 4,45 x 2,21 m

Condition: used, Year of construction: 2011, WAGNER WDS 480 CNC lathe, No. TG 06067, built in 2011, 8-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system Febvowczkcedp Eyegb

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 304372, MACHINE SPECIFICATION Centres Height 167mm Admits between 635mm Swing Over bed 330mm Over cross slide 210mm In gap diameter 480mm Length 115mm Spindle Bored to pass 38mm diameter Nose No. 4 D1 Camlock Speeds Number 16 Range 40 to 2500rpm Motor 1500rpm at 50Hz 2.2kW Cross Slide Width 140mm Travel 190mm MACHINE SPECIFICATION Cont’d Top Slide Fgjbvdp Eswcy S Eoyob Width 82mm Travel 92mm Tailstock Quill – diameter 42mm – travel 110mm – morse taper No. 3 Set over +/-12mm Approx weight 635kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis Digital Readout System 3 & 4 Jaw chucks Quick change toolpost and 2-off toolholders Lighting Chuck guard Coolant system Rear splashguard

Condition: excellent (used), Year of construction: 1998, turning length: 650 mm, turning diameter over cross slide: 370 mm, turning diameter: 500 mm, spindle bore: 77 mm, Machine details Stock no. 1105-04067 Type of machine CNC Lathe Make DAEWOO Type PUMA 250 B Year of manufacture 1998 Fgsbvdp Eowcytcjyjb Type of control CNC Storage location HAGUENAU FRANCE Country of origin Corea Delivery time to be agreed Freight basis ex site Technical details turning diameter 370 mm turning length 648 mm control Fanuc 18 t bar diameter 77 mm swing dia. 570mm swing diameter over cross slide guide 255 mm max. turning diameter 255 mm drive capacity - spindle motor 18.5/22 kW turning speeds 3500 rpm turret (x-stations) 10 pos. JAPAN rapid traverse X-axis 24 m/min total power requirement 32 kW weight of the machine approx. 6 t dimensions of the machine approx. 3.43 X 1.85 X 2 m Additional information GOOD MACHINE WITH CNC FANUC 21 IT 3 JAW CHUCK DIA 250 MM CHIP CONVoYEUR TOOL SETTER COOLANT

Condition: used, Year of construction: 2015, Technical details: number of spindles: 6 spindle passage: 40 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL Machine has only Single-NCU without PCU. The complete energy supply of all 6 main spindles was replaced in April 25. Fgsbvdp Eovap R Teyeb *

Condition: used, Year of construction: 2011, WAGNER WDS 480 CNC lathe, No. TG 06064, built in 2011, 8-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system Fgobvewczi Sjdp Eyob

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 304397, MACHINE SPECIFICATION Centres Height 167mm Admits between 635mm Swing Over bed 330mm Over cross slide 210mm In gap diameter 480mm Length 115mm Spindle Bored to pass 38mm diameter Nose No. 4 D1 Camlock Speeds Number 16 Range 40 to 2500rpm Motor 1500rpm at 50Hz 2.2kW Cross Slide Width 140mm Travel 190mm MACHINE SPECIFICATION Cont’d Top Slide Width 82mm Travel 92mm Tailstock Quill – diameter 42mm – travel 110mm – morse taper No. 3 Set over +/-12mm Approx weight 635kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis Digital Readout System 3 & 4 Jaw chucks Fgjbvdp Eewcyy Neyjb Quick change toolpost and 3-off toolholders Lighting Chuck guard Coolant system Rear splashguard

Condition: used, Year of construction: 2012, CNC lathe MTRent/MTCut T20MC (FCL-200MC), No. A2120101, built in 2012, 12-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system Fgsbvdowczilsp Eyob

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 304373, MACHINE SPECIFICATION Centres Height 167mm Admits between 635mm Swing Over bed 330mm Over cross slide 210mm In gap diameter 480mm Length 115mm Spindle Bored to pass 38mm diameter Nose No. 4 D1 Camlock Speeds Number 16 Fgobvdewcyumjp Eyeb Range 40 to 2500rpm Motor 1500rpm at 50Hz 2.2kW Cross Slide Width 140mm Travel 190mm MACHINE SPECIFICATION Cont’d Top Slide Width 82mm Travel 92mm Tailstock Quill – diameter 42mm – travel 110mm – morse taper No. 3 Set over +/-12mm Approx weight 635kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis Digital Readout System 3 & 4 Jaw chucks Quick change toolpost and 2-off toolholders Lighting Chuck guard Coolant system Rear splashguard

Condition: used, Year of construction: 2012, CNC lathe MTRent/MTCut T20MC (FCL-200MC), No. A2120301, built in 2012, 12-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system Fgobvdp Eewczhneysb

Condition: used, Year of construction: 2015, CNC lathe MTRent/MTCut T25FY, No. M0150504, built in 2015, 12-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system Fgsbvdowczfyop Eysb

Condition: used, Year of construction: 2008, WAGNER DCD 250C x 1,500 lathe, No. G1311, built in 2008, center distance 1,500 mm, with SINO SDS6-3V XYZ control Fgsbjwczfmevdp Eyeb

Condition: used, TOS Sui 50-1500 lathe, No. 150150900039, center distance approx. 1,500 mm, weight 2,820 kg, with various lathe chucks Fobswczd Novdp Eyogb

Condition: used, Year of construction: 1999, STANKO Samat 400M lathe, No. 9990, built in 1999, center distance approx. 700 mm Fsbvdewczdisp Eysgb

Condition: used, Year of construction: 2020, WAGNER WDST 600x600 CNC lathe, No. 2027117, built in 2020, 12-station tool turret, chip conveyor, SIEMENS Sinumerik 828D control system, weight approx. 4,500 kg Fjbewczc Sovdp Eyjgb

Condition: used, Year of construction: 2021, COLCHESTER Tornado A90 CNC automatic lathe, No. T90241, built in 2001, max. 6,000 rpm, 12-station tool turret, FANUC 21i-T control, with COLCHESTER Tornado MBF 1000 bar loader Fgobvjwczcrodp Eysb