Condition: excellent (used), Year of construction: 1973, Functionality: fully functional, spindle bore: 81 mm, turning diameter: 590 mm, spindle speed (max.): 950 rpm, bed width: 490 mm, rotational speed (max.): 950 rpm, overall weight: 3,900 kg, quill mount: MK 5, spindle mount: MK 5, Year: 1973 Rotating length: 2000mm Diameter over bed (max): 590 mm Diameter over cross slide: 380 mm Delioium Tmellptsut Spindle Hole: 81mm Distance between centers: 1500 mm Minimum spindle speed: 19 rpm Maximum spindle speed: 950 rpm Total power requirement: 11 kW Weight: 3,9t

Condition: used, Year of construction: 1996, Functionality: fully functional, CNC Lathe TOPPER TONGTAI TNL-100TL Fanuc O-T Series With tailstock and conveyor Year 1996 Supplied with tools documentation In good working order Dolilov Hctnjlpteut

Condition: used, Year of construction: 2007, machine/vehicle number: PT18SY0137, turning length: 230 mm, turning diameter: 210 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 720 mm, tool mount: 20 mm, rapid traverse X-axis: 20 m/min, bar passage: 65 mm, Equipment: documentation/manual, The machine is in good technical condition. Chip disposal transporter Doliswc S Sdjllptsut Plenty additional tool and accessories within the machine. You'll be responsible for arranging dismantling, packing, loading and transportation. Full Payment must be made before loading.

Condition: good (used), Functionality: fully functional, Distance between centers: 650 mm Center height: 160 mm Spindle bore: 40 mm Speed: 48 – 2500 rpm Tailstock: MT 3 Djlillpjwc Sh Eoteut Drive power: 2.4 / 3 kW Weight: 680 kg Dimensions: 1,600 x 750 x 1,290 mm Paint finish: RAL 6011 (reseda green) Digital readout: 3-axis Fagor Accessories: Additional accessories available upon request! We are also happy to offer this machine completely overhauled!

Condition: good (used), Year of construction: 2015, operating hours: 35,000 h, chuck outer diameter: 250 mm, feed length X-axis: 680 mm, feed length Z-axis: 200 mm, spindle speed (min.): 6,000 rpm, power: 39 kW (53.03 HP), rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, controller manufacturer: Siemens, controller model: 840 DS, input voltage: 400 V, coolant supply: 6 bar, nominal power (apparent): 45 kVA, EMAG VERTICAL SINGLE-SPINDLE TURNING AND GRINDING CENTER Dslilslfduiolptsut EMAG - REINECKER VSC 250 DS Used machine: Year of manufacture: 2015 Control: Siemens 840 DS The attached emulsion mist extraction system (air filter) and the matching base frame can be purchased separately. Condition: Used machine, very good Machine runtime approx. (hours): 35,000 Program runtime approx. (hours): 22,000 Operating voltage: 400V Air supply: 6 bar Total power requirement approx. 45 kVA Cooling unit: water/water Machine dimensions without peripherals (LxWxH): approx. 3200x1900x2650 mm CYLINDRICAL GRINDING Integrated motorized grinding spindle with a maximum speed of 45,000 rpm and a maximum power of 18 kW Touch dressing for vitrified CBN grinding wheels Automation / Gantry: EKF basket stacking cell as raw/finished part storage for 400x600 mm baskets on a floor trolley 3 basket stacks for uninterrupted operation, even during basket changes, loading/unloading via a loading gantry The machine is in very good condition and has been serviced by EMAG. The production process involves pre- and finish machining of the bore/end faces by hard turning the flat surfaces, as well as the diameter/bore, followed by bore grinding. We have described the details of the system as best as possible. We would be happy to provide more detailed information upon request. "Price and details upon request." All technical information is subject to typographical errors/mistakes. For sale only in EU countries.

Condition: good (used), Hollow clamping cylinder ZHV-S Dolilelgvtvelptout Hydraulic cylinder with passage with a maximum speed of 4000 1/min and a passage of xxmm piston stroke (mm): xx piston diameter (mm): xx max. working pressure (bar): 40 Z/Dmax (daN): 12000 traces of use and storage available shipping costs EU on request

Condition: used, Functionality: fully functional, manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm Dueliljudi H Djlptet revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 81154, turning length: 600 mm, turning diameter over cross slide: 300 mm, spindle speed (max.): 4,000 rpm, turning diameter: 360 mm, bar passage: 60 mm, TECHNICAL DETAILS Control: Siemens 840D Machining area Bar capacity: Ø 60 mm Spindle bore: Ø 66 mm Turning diameter (effective): 300 mm Permissible turning diameter: 360 mm Turning length: 600 mm Center distance: 870 mm Spindle Spindle mount: ISO-A6 Speed range: 0 – 4,000 rpm Power: 15 kW (S1) Tool turret Turret system: Baruffaldi VDI Tool stations: 12 Driven tools: 6 Travel paths X-axis travel: 190 mm Z-axis travel: 650 mm Rapid traverse speed X/Z: 18 m/min Tailstock Tailstock movement: manual via keystroke or M-code Condition and Special features Filter system: Mist extraction currently out of service EQUIPMENT Dueliswc Sa Usllptot - LNS Super Hydrobar hydraulic bar loader (Swiss made) - SMW-AUTOBLOK chuck type 210HYN-S - Tool package with clamping jaws and VDI tool holders - Turret with 6 driven tools - Programmable tailstock control

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, turning height: 2,200 mm, workpiece weight (max.): 20,000 kg, turning diameter over cross slide: 2,000 mm, turning diameter: 2,600 mm, rotational speed (max.): 250 rpm, spindle speed (max.): 3,000 rpm, table load: 20,000 kg, table diameter: 2,000 mm, Equipment: rotational speed infinitely variable, TOS SKIQ 20 CNC Vertical Borer. 2009. CNC Vertical Borer with Live Tools Drilling and Milling Siemens Sinumerik 840D, ATC 15. With Tools and Renishaw Workpiece Measuring. Table diameter 2.000 mm Max. Swing up to a height of 580 mm 2.600 mm Max. Swing 2.300 mm Turning Heigth 2.200 mm Duolillpowc R Uwstet Table speeds, stepless 2,5-250 rpm Table load capacity 20.000 kg Table motor 80 kW Ram 180 x 200 mm, stroke 1.000 mm Live spindle speed 4 - 3.000 rpm Live spindle motor 28 kW

Condition: excellent (used), Year of construction: 2008, LZ lathe, manufacturer TOS SUS80-2750, year of manufacture 2008, completely overhauled by TOS CELAKKOVICE. Overbed diameter: 840 mm Overhead diameter: 530 mm Center length: 2750 mm Spindle speeds: 7.1-900 rpm Spindle bore: 82 mm Input in both X-Z directions Multifix tool holder size: D1 Forkardt chuck: 400 mm Faceplate: 800 mm 2 fixed steady rests and 1 with running steady Cooling system available Machine documentation available. Machine in very good condition, little used. Duelillpowavx Notjt For further information, see data sheets.

Condition: excellent (used), Year of construction: 2022, operating hours: 700 h, Functionality: fully functional, Like-new OKUMA LB3000II-MYW 800 Year of manufacture: 02/2022 On-time hours: approx. 3000 Spindle hours: approx. 700 Control: Okuma OSP-P300LA including OSP suite with numerous apps Eco Suite with extensive energy-saving features Counter spindle on W-axis, 825 mm travel and driven tool stations/C-axis and Y-axis - Main spindle: Short taper 6, front bearing diameter 120 mm, bore diameter 80 mm, hollow shaft motor with 22 kW power, speed range 45-5000 rpm, torque 427 Nm - 12-station tool turret with "radial" direct mounting system, drive data: 7 kW, 40.4 Nm, 45-6000 rpm C-axis with 0.001° resolution Synchronized tapping and automatic main spindle interpolation - Y-axis with 115 mm stroke (+70 / -45 mm) and hydraulic clamping - Counter spindle on W-axis, cylindrical mount, front bearing diameter 100 mm, bore diameter 62 mm, speed range 50 - 6000 rpm, W-axis rapid traverse 30 m/min C-axis function (0.001°) on counter spindle Tool height correction in Y-axis for turning tools Tool monitoring system Handwheel Tool measuring device 4 GB part program memory MacMan machine management 2x USB 2.0 ports Dolilewc N Aaolptout Ethernet/LAN interface with browser and DNC-T1 Chuck opening/closing with the spindle running via M-function Electrical Spindle orientation +/- 0.1° 96 tool corrections Hi-Cut Pro for driven tools Kitagawa chuck, bore in chuck: diameter 75 mm, outer diameter: 254 mm, speed: 4,200 rpm, bore in draw tube: diameter 70 mm Kitagawa chuck, bore in chuck: diameter 45 mm, outer diameter: 169 mm, speed max. 6,000 rpm, bore in draw tube: diameter 45 mm Hinged belt chip conveyor Mayfran MT 10 - discharge height approx. 1,200 mm Submersible pump with motor, reinforced coolant pump 4 bar / 35 l/min Bar loader LNS SL 80 S Programmable workpiece catcher, with finished part container mounted on the front of the door, pneumatic 6 bar, for parts up to diameter 80 x 150 mm, workpiece weight max. 5.8 kg Availability: immediately

Condition: excellent (used), Functionality: fully functional, Swing over bed: 1290mm Swing over cross slide: 910mm Swing in gap (l:500mm): 1580mm Center distance: 6000mm Spindlebore: 155mm Spindle speed: 6-800rpm Spindle nose: ASA A2 11" Workpiece between centers: 20 tons Taper in tailstock: Mk6 Longd.feed: 0.045-5mm/r Crossfeed: 0.0220-1.5mm/r Thread metric: 0.5-56 Thread's modulus: 0.25-28 Threads whitworth: 1/2-84/ " Spindle motor: 30 hp Manufacturing year: 1971 Length: 9500mm Width: 2000mm Height: 1600mm Weight: 13400kg Sony DRO cross slide 3 pcs. Steady rests Face plate 4-jaw chuck Hardened guideways Dusliswc Nzpellptot Power on topslide

Condition: not inspected (used), Functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm Delilljqwlmqeptout spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, turning length: 130 mm, spindle speed (max.): 12,000 rpm, spindle bore: 17 mm, bar passage: 13 mm, feed length X-axis: 30 mm, feed length Y-axis: 135 mm, TECHNICAL DETAILS Control: Siemens Sinumerik 840D Configuration: Dual electrospindles, dual C-axis Main spindle and moving headstock Bar capacity: Ø 13 mm Spindle bore: Ø 17 mm Electrospindle (100/60%): 2.2 / 3.7 kW Spindle speed: 12,000 rpm Spindle stroke: 130 mm Counter spindle Bar capacity: Ø 13 mm Spindle bore: Ø 17 mm Electrospindle (100/60%): 2.2 / 3.7 kW Max. spindle speed: 12,000 rpm Max. workpiece length in the counter spindle: 95 mm Max. workpiece length with front ejection: 130 mm mm Tool carrier Horizontal travel (X-axis): 2 × 30 mm Vertical travel (Y-axis): 135 mm Tool holder: 1 tool carrier Outside stations: 8 stations, 12 × 12 mm Inside tools: 3, mounting bore Ø 16 mm Duslilowc R Ukolptot Driven tools Number of driven tools: 3 Tool holder: ER 11 / ET 1-12 Speed (2 stations): 6,000 rpm Speed (1 station): 2,000 rpm Threading: Rigid threading Workpiece output: via counter spindle MACHINE DETAILS Machine dimensions (L × W × H): 1,830 × 950 × 1,717 mm Machine weight: 2,000 kg Cooling Coolant tank: 120 l Flow: 63 l/min Pressure: 2 bar Pneumatics Operating pressure: 6 bar Connection: Ø 10 mm Electrical data Supply voltage: 3 × 400 V / 50 Hz Max. power consumption: 21 kVA Cable cross-section: 10 mm² Fuses: 32 A, type AM Bar loader Standard diameter: Ø 2 – 16 mm Max. bar length: 3.2 m EQUIPMENT - FMB bar loader magazine Minimag type 3200 / 1205 A, built in 2002 - Diameter range for bar loader: Ø 2 – 13 mm - Workpiece output via counter spindle - Rigid thread cutting function - 3 driven tools - Dual C-axis with electric motors for main and counter spindle

Condition: used, Year of construction: 2011, Selling a well-maintained CNC turning and milling center DMG Mori Seiki NLX 2500 SY/700, built in 2011 with a Mitsubishi 730 BM control! Only around 9000 processing hours! Travel paths X-axis: 260 mm Y-axis: 100 mm Z-axis: 795 mm Equipment and accessories: Tool turret: 12 positions, all driven Speed of driven tools: Max. 10000 rpm -Part catcher - Electronic main connection: 400 V - Power consumption: 37.6 KVA - Internal cooling: available - Main spindle chuck: Kitagawa BB210AB - Counter spindle chuck: Kitagawa B206A521F - Turning diameter: 366 mm - Turning length: 705 mm - Hollow spindle: 80 mm - Main spindle max. speed: 4000 revolutions, with three-jaw chuck - Power: 18.5 kW - Counter spindle max. speed: 6000 revolutions, with three-jaw chuck - Chip conveyor, -Tool measurement in the work area -Measuring arm can be used manually for the counter spindle - Short bar loader, make LNS Duelsu Nu Efsillptot - Incl. tools, 8 fixed tools, 3 driven tools - Incl. extraction system, make Indusa - Incl. complete documentation Machine is available immediately! Machine is completely cleaned and checked! Machine is loaded by us! Transport can be organized on request!

Condition: used, Year of construction: 2019, Chuck - 12” Length - 1200mm Djlillpev Thr Ajteut Controller - Fanuc Oi Mate-TD

Year of construction: 2014, Condition: used, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm Djlillpjqvd Iqoteut max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: used, Year of construction: 2019, Controller - Fanuc Oi TF Year - 2019 Hydraulic Chuck size - 15" with rpm 2500 Manual Chuck size - 20 Inch include Turret capacity - 12 Spindle bar capacity Dia - 115 mm Max turning dia - 635mm Dolillev Tg U Noptsut Swing over - 711mm Z-Axis - 2500 mm

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm max. turning diameter 490 mm control SIEMENS - 840 D main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Duolilleu Hrbfjptjt Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 5 U | HEYNUMAT 5-U | HEYNUMAT 5 U 1500

Year of construction: 2014, Condition: used, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° Vertical Turning Machine | EMAG - VL2 Delillpjqvd Iuotjut equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. Duelillpovfxmnjtst - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: used, Year of construction: 1998, turning length 4.500 mm greates pass round over bed 810 - 760 mm Dujlillpju Hra Ietet swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: used, Year of construction: 1999, max. bar material dia. 42 mm max. turning diameter 180 mm turning length 350 mm control Fanuc 18i Main-/Counter -spindle turning speeds 6.000 U/min y-axis +/- 40 mm number of tapers in turret head 12 tool holder VDI 25 Dimensions (L x W x H) 3.838 x 820 x 1.900 mm weight of the machine 4.400 kg CNC Turning- and Milling Center | SCHAUBLIN - 42S TM-5 with main and sub-spindle, Y-axis, turret configured for driven tools, and equipped with a bar feeder. The machine has 18.600h running hours. Scope of delivery / Accessories: Clamping devices: + 15x collets SK42 (for Hainbuch Spantop Nova) + Manual wedge bar chuck (like new) with various jaw sets (Rota-S-plus) + Various jaw sets for pneumatic chucks (Graber) Tool holders (Driven tools): + 1x double holder for main and sub-spindle + 3x axial for main spindle + 3x radial + Approx. 15x various holders for boring bars and turning tools Additional accessories: + Hydrobar bar feeder for 1.5m bars Djlev Htkqeillptjut The machine is in good condition and can be inspected under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 42STM-5 | 42STM | 42STM5 | 42 S TM-5

Condition: used, Year of construction: 2006, greates pass round over bed 960 mm swing diameter over bed slide o: 860 / u: 730 mm turning diameter over bed slide o: 860 / u: 400 control SIEMENS - 840 D forward bearing diameter 200 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000 equipped with a turret for driven tools as well as tailstock. The machine is in a well-maintained condition and Duelijvfxmhjllptet can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000

Condition: used, faceplate diameter 4.000 mm travel -x axis 4.500 mm travel -z axis 600 mm control Siemens Sinumerik 840D-sl Duslilehwgn Eolptot feed range 0 - 8.000 mm/min turning speeds 1) 0,7 - 5,6 U/min turning speeds 2) 2,8 - 22,4 U/min turning speeds 2,1 - 56 U/min tool taper Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08