Condition: good (used), Chuck flange, flange mount, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange Duelikp Rewcd A Ijgjt -Chuck flange: mounting flange -Outside: Ø 198 mm -Bolt circle: Ø133 mm / M12 -Hole: Short taper 6, cone Ø 102 - 105 mm -Dimensions total Ø 198 x 55 mm -Weight: 4.0 kg

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 2.2 / 3.7 [kW] - Spindle speeds : 200 - 10000 [rpm] - Max. bar diameter : 20 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 1.5 / 2.2 [kW] - Spindle speeds : 200 - 12000 [rpm] - C axis indexing precision : 0.001 [°] * X/Z stroke : 488 / 335 [mm] TURNING-MILLING SPINDLE Duolikowd Ud Esp Rgot - X/Z stroke : 289 / 305 [mm] - Y stroke : 75 (-15/+60) [mm] - B Axis stroke : 180 [°] - B axis indexing precision : 0.001 [°] - Tool type : 15T - Spindle speeds : 300 - 30000 [rpm] - Spindle power : 3.7 / 5.5 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 24 SECONDARY OPERATION Number of positions : 4 Number of positions : 3 WEIGHT & DIMENSIONS - Machine weight : 2.700 [kg] MACHINE HOURS - Number of hours under power : 12249 [h] - Number of working hours : 1816 [h] EQUIPMENT - CNC : Fanuc 31i Model B5 - 3 colors status lamp - Coolant tank - Parts catcher - Parts conveying strip - Electric transformer

Condition: good (used), Year of construction: 2014, Magnetic chuck (instead of collet chuck) Max. turning diameter 400 mm Main spindle speed 0-4,000 rpm Max. workpiece length 200 mm Travel X = 960, Y = +/- 90, 400 mm TOOL TURRET 12 driven stations VDI 40 chuck Speed 0-4,000 rpm Parts feeding via shuttle (included) Dolikpswcdyto Rgsut Two machines are available

Condition: good (used), Functionality: fully functional, Center height 190 mm Center width 1000 mm Delewcdwljikp Rgeut Bed guide offset downwards and covered at the front

Condition: excellent (used), Year of construction: 2005, CNC Turning and Milling Center MORI SEIKI NL 2500Y/700 2005 MSX 850 Control Technical Specifications: Turning diameter 275 mm Turning length 705 mm MAPPS II MSX 850 Control Swing over bed 923.8 mm Swing over cross slide 755 mm Max. turning diameter 356 mm Max. bar diameter 80 mm Main spindle Speed range - main spindle 4,000 rpm Drive power - main spindle 26 / 22 kW Spindle nose JIS A2-8 Spindle bore 91 mm Spindle bearing diameter 140 mm C-axis 0.001 ° Travel X-axis 260 mm Dusliewcdu Rskp Rget Z-axis 795 mm Y-axis 100 (+/-) 50 mm Turret Tool positions: 12 positions Shaft height for square tool: 25 mm Shaft diameter for boring bar: max. 50 mm Turret indexing time: 0.25 sec. Speed range of driven tools: 6,000 rpm Drive power - driven tools: 5.5 / 3.7 kW Feed rate: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse Y-axis: 10 m/min Tailstock: Tailstock travel: 564 mm Quill diameter: 80 mm Taper: MT 4 Rapid traverse 7 m/min Total power requirement: 37 kVA

Condition: used, Year of construction: 2006, operating hours: 18,030 h, Functionality: fully functional, turning diameter over cross slide: 762 mm, turning length: 864 mm, turning diameter: 762 mm, spindle bore: 76 mm, spindle speed (max.): 3,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, spindle motor power: 22 W, overall weight: 7,200 kg, bar passage: 76 mm, chuck outer diameter: 250 mm, center height: 991 mm, Hello, Due to the closure of the business, the entire company is being sold. The following machines: Haas SL-10BHE Year: 2007 Haas SL-30THE Year: 2006 Haas SL-30THE Year: 2001 Haas VF-4SSHE Super-Speed Year: 2007 Haas VF-4BHE Year: 2007 Haas VF-4HE Dslswcc Ipjikp Rgsut Year: 2001 Machines are in good condition, and the tools can be negotiated. Machines are in good condition, and the tools can be negotiated.

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate Duelikp Rowcdw Esgot -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Type: 8230-160/5 -Outside: Ø 160 mm -Bolt circle: Ø105 mm -Mounting: Short taper 5, cone Ø 79 - 82 mm -Dimensions total Ø 160 x 65 mm -Weight: 2.2 kg

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 11/15 [kW] - Torque : 218/258 [Nm] - Spindle speeds : 4500 [rpm] - Max. bar diameter : 66 [mm] - Max. turning diameter : 340 [mm] - Max. diameter on bench : 400 [mm] - Max. chuck diameter : 190 [mm] - C axis indexing precision : 0.001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 227.5 [mm] - Y stroke : +/- 41 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 3.7/5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 21 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2000 X 1600 [mm] - Machine height : 1850 [mm] - Machine weight : 4800 [kg] Delikp Reu Uu R Njgsut MACHINE HOURS - Number of hours under power : 69240 [h] EQUIPMENT - CNC : Fanuc - Interface : Ethernet / RS232 / USB / PCMCIA - Coolant tank - Chips conveyor - Oil mist extractor : DONALDSON - Tool probe - Parts catcher - Fire extinguisher * : SIEMENS * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Number of turning tool holders : 1 - Number of fixed tool holders : 4 - Collet chuck : EROWA

Condition: good (used), Year of construction: 2011, spindle diameter: 52 mm, Equipment: documentation/manual, Turn-Mill Center Manufacturer: Mori Seiki Type: NZ 1500 Year of manufacture: 2011, iBN: 2012 TECHNICAL DETAILS Swing over bed: 800 mm Turning diameter: 300 mm Turning length: 810 mm Bar capacity/bar throughput: 52 mm Speed: 6000 rpm Spindle power: 22 kW Y-axis: +65 / -45 mm Control: Fanuc, model F31iA with MAPPS IV dialog programming Additional features: Polygon turning, RAM expansion to 1 MB, max. 1000 storable part programs, synchronous thread cutting, hobbing function on main and sub-spindles, tailstock function, holding brake on main and sub-spindles, workpiece unloading system Number of turrets: 2 Number of tool positions: 2 x 16 Pieces Speed of driven tools: 6000 rpm Duolikpev Iy A Ae Rget MACHINE DETAILS Weight: 8100 kg Connected load: 81 kVA On-time: 37,116 h on March 12, 2025 Machining time turret 1 / 2: 8,815 / 5,794 h EQUIPMENT Extensive tool selection: - 4 straight driven tools - 1 milling head - 4 angle heads - 1 double angle head - Approx. 16 static tool holders The machine has been fitted with a new main spindle bearing; its geometry is still in excellent condition. All holders, tools, and drive units are included.

Condition: good (used), Year of construction: 1998, operating hours: 7,841 h, Functionality: fully functional, machine/vehicle number: M086346C3G D, spindle speed (max.): 15,000 rpm, spindle speed (min.): 15 rpm, spindle motor power: 22,000 W, Vertical turret lathe with CNC Control: FANUC Series O-T Number of turrets: 1 Number of tools stations: 12 Duolikpotmrdpj Rgst Chip conveyor: SB 30 Boring bar holder: Diameter 50 mm The machine is still under power.

Condition: ready for operation (used), Year of construction: 1993, Pick-up Polygonal device Threading box Chip conveyor Tube bundle and stand Miscellaneous accessories Doliowd R Rbskp Rgout

Condition: ready for operation (used), Year of construction: 2003, operating hours: 2,876 h, Functionality: fully functional, turning length: 750 mm, turning diameter: 320 mm, spindle speed (max.): 3,550 rpm, controller manufacturer: Siemens, TECHNICAL DETAILS Turning diameter: 320 mm Turning length: 750 mm Diameter – standard tool over support: 150 mm Cross travel: 185 mm Spindle bore: 52 mm Control: Siemens Dujliowd Rw Iekp Rgst Spindle and drive Speed: 14–3,550 rpm Gear ratios: 2 Quill stroke: 120 mm Rapid stroke: 6 m/min MACHINE DETAILS Space requirement: approx. 2,600 x 1,440 x 1,440 mm Machine weight: approx. 2,000 kg Spindle hours: 2,876 h (machine originates from a training workshop) Total power requirement: 10 kW

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 250 mm -Bolt circle: Ø133 mm Duolikewcdv Ujp Rgot -Hole: short cone 6, cone Ø 103 - 105 mm -Dimensions total Ø 250 x 75 mm -Weight: 8.4 kg

Condition: excellent (used), Year of construction: 2006, operating hours: 8,768 h, Functionality: fully functional, machine/vehicle number: 8042942142, turning diameter: 350 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 5,000 rpm, total height: 2,100 mm, total length: 4,000 mm, chuck outer diameter: 210 mm, total width: 2,000 mm, collet bore: 50 mm, overall weight: 4,000 kg, Machine in perfect technical condition. Lots of tool holders and lathe jaws. The machine has been in storage for the last year. The machine is powered, can be tested on site Delikp Rswd Nf Djgeut

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, turning length: 3,100 mm, turning diameter over cross slide: 700 mm, turning diameter: 1,000 mm, spindle bore: 165 mm, achine details Stock no. 1105-04069 Type of machine CNC Turning and Milling Center Make DOOSAN DAEWOO Type PUMA 700 LM b Year of manufacture 2006 Type of control CNC Storage location FRANCE Country of origin CORREA Delikewd I H Hjp Rgeut Delivery time IMMEDIATELY Freight basis EX WORK Technical details turning diameter 900 mm turning length 3050 mm control FANUC 21 i TB swing dia. 1030mm standard turning diameter 750 mm bar material dia. 165mm Spindle bore 110 mm travel -x axis 471 mm travel -z axis 2100 mm rapid travel - longitudinal/face 15/20 m/min Spindle RPM 3000 1/min spindle drive 45 kW turret stations / rotary tool stations 12 / 6 BMT 85 speed of driven tools 3000 1/min total power requirement 62.2 kVA weight of the machine approx. 22.2 t dimensions of the machine approx. 7.1 x 2.2 x 2.2 m Accessories Chip conveyor YES Parts and total counter Tool holders rotary NO Additional information High precision turning and milling center Easy programming by FANUC21 i TB A total of 9 toolholders come with the machine: WITH LIVE TOOLS LUNETTE steady CHIP CONVOYER

Condition: good (used), Year of construction: 2006, operating hours: 40,000 h, Functionality: fully functional, machine/vehicle number: M086, spindle speed (max.): 1,500 rpm, spindle speed (min.): 15 rpm, spindle motor power: 22,000 W, Vertical turret lathe with CNC Control: FANUC Series 18i-TB Number of turrets: 1 Dslietmq Ukokp Rgsut Number of tools stations: 12 Chip conveyor: 3508734 Boring bar holder: dia. 50 mm The machine is still under power.

Condition: excellent (used), Year of construction: 1997, - Iemca SIR automatic loader model 25 P year 1998 - Chip conveyor - Threading device - Pick-up Dujlikp Rev Ea Nqegjt - Tool holder - Cams

Condition: excellent (used), Year of construction: 2008, DMG CTX 510 Sinumerik 840D Dsliksr Ak S Nep Rgeut Machine in prefect condidtion, equipped with bar feeder and C axis Spindel working 6720 hours Spindel bore 95mm Collet chuck Forkardt D=100mm max Tools holder VDI 40

Condition: good (used), Year of construction: 2000, Emco Emcoturn 365-65, Year of manufacture 2000, Siemens 810 D control system, X/Z travel 210/610 mm, 12-station VDI 30 turret, all stations driven, driven tools up to 4,000 rpm, collet chuck, tailstock, C-axis 0.001°, spindle speed up to 6,300 rpm, coolant system, Djlikswd E N Sop Rgsut chip tray, accessories, Machine has exclusively machined aluminum and brass, Machine is available at short notice.

Condition: ready for operation (used), Functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 77 mm, turning diameter over bed slide: 800 mm, GURUTZPE lathe model Super AT 400/6000, 6,000 mm between points, turning on bed 820 mm, on carriage 550 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed rear Steady , , has 4 independent claws chuck diameter 800mm, , very good condition in general Deliowd D Itskp Rgjut

Condition: good (used), Year of construction: 2017, Functionality: unexamined, machine/vehicle number: 5012221, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter: 430 mm, turning length: 760 mm, total length: 1,890 mm, total width: 900 mm, total height: 1,800 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, overall weight: 1,700 kg, - Turning diameter over offset: 690 mm - Bed width: 300 mm - Spindle bore: 58 mm - Longitudinal feeds: 0.05 - 0.82 mm/rev - Face feeds: 0.02 - 0.4 mm/rev - Thread (metric): 0.5 - 7 mm - Lead screw diameter: 35 mm - Lead screw pitch: 6 mm Djlikpsv Iriue Rgjut - Tailstock quill diameter: 58 mm - Tailstock quill adjustment range: 150 mm - Quill taper mount: MK4

Condition: good (used), Year of construction: 2004, Emco ET 420 / double spindle lathe, Year of manufacture 2004, Siemens control, max. bar capacity 26 mm, max. part length 600 mm, 2 main spindles, 2 counter spindles, double bar loading magazine, main spindle up to 5,000 rpm, C axis 0.01° , Revolver 2 x 12-fold VDI 16, 4 driven tool stations / turret, chip conveyor, Duolor Izbyjikp Rgst coolant device, parts catcher long parts ( self-made )

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, spindle bore: 80 mm, turning length: 2,000 mm, turning diameter over bed slide: 620 mm, swing diameter over cross slide: 415 mm, Pinacho lathe with Fanuc semi-control model Smart Turn 5 310 with 2000mm between points, diameter over bed 620mm, diameter over cross slide 415mm, quill hole 80mm, 12 speeds divided into three speed ranges 0-240rpm/240-630 rpm, 630-1700 rpm main motor motor 7,5Kw, working feeds Z, X 0-5000m/min, year 2005, in VERY good condition. Dujlikewd D Hijp Rgot

Condition: good (used), Functionality: unexamined, machine/vehicle number: 160378, turning diameter over cross slide: 180 mm, spindle bore: 40 mm, turning diameter: 375 mm, center height: 160 mm, turning length: 750 mm, total length: 2,500 mm, total width: 1,000 mm, total height: 1,500 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 38 rpm, overall weight: 2,500 kg, - Operating voltage: 380 V - Largest workpiece diameter over cheek: 375 mm Dusliksv Irh Dep Rgst - Largest workpiece diameter over cross support: 180 mm - Spindle taper: Morse 5 - Collet passage: 24 mm - Fine feeds longitudinal and transverse: 0.015 to 0.21 mm/rev - Longitudinal and transverse feeds: 0.025 to 0.35 mm/rev - Cross support path on the cheek: 750 mm - Tool slide path: 120 mm - Cross slide path: 215 mm - Center height above tool slide: 32 mm - Steel cross section: 20 x 20 mm - Tailstock quill taper: Morse 3 - Quill path: 120 mm - Lateral adjustment: +/- 10 mm Equipment: - Incl. documentation - Matching workshop cabinet including accessories

Condition: good (used), Functionality: unexamined, machine/vehicle number: 10279, turning diameter over cross slide: 200 mm, spindle bore: 35 mm, turning diameter: 300 mm, center height: 150 mm, turning length: 750 mm, total length: 1,860 mm, total width: 700 mm, total height: 1,800 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 40 rpm, overall weight: 1,030 kg, - Operating voltage: 380 V - Connected load: 3 kW - Nominal current: 25 A - Frequency: 50 Hz Equipment: Djlev Irgtoikp Rgjut - Tailstock - Multifix type B tool holder - Three-jaw chuck (diameter: 160 mm) - 2-axis digital display from the manufacturer RSF