Condition: good (used), Chuck flange, flange mount, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 250 mm -Adapter: -Short cone: size 8 (Ø135-139 mm) Deliewc Rvzjkun Dskl -Bolt circle: Ø 170 mm -Dimensions: Ø 250 x 175 mm -Weight: 14.1 kg

Condition: like new (used), Rolling Center Punch with Interchangeable Inserts Bruckner SE 5487 MK 4 Stock Number (28605) 1 Center Punch Type 487 B 1 Center Punch Type 487 C 1 Inner Taper Type 487 D Dkjlikunewc Nyxe Dsl As New Condition

Condition: good (used), Short bar loader magazine LM 1200. Year of manufacture 11/2005. Very good condition – 100% functional. Available immediately. Dkjlijwfuntjkun Djl

Year of construction: 2006, Condition: ready for operation (used), A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible Dslikswftcvoun Dekl

Condition: excellent (used), Year of construction: 2010, operating hours: 15,600 h, Functionality: fully functional, Spindle speed: 50-6000rpm Movement XA-XB: 205mm ZA-ZB: 700mm W: 730mm YA-YB: 95mm Turrets: 2x 16pos Multitasking V16 Spindlespeed live tools: 45-6000rpm Motors live tools: 5.5/3.7kW Spindle motors: 22/15kW Manufacturing year: 2010.12 Dkjlswfr R Esikun Dsl Length: 3300mm Width: 2500mm Height: 2500mm Weight: 9000kg Robot interface

Condition: used, Year of construction: 2001, Emco Turn 365 MC with counter spindle + chip conveyor (can be inspected under power) Year of manufacture 2001 Bar loader present --> feed cylinder defective Operating hours: read 16,000 Used condition Siemens control system Control cabinet cooling unit Has been inspected Work completed: Main and counter spindle belts checked! Geometry completely measured and adjusted. Dkolikujv I Udnon Dol New drive modules and E/R module Some work is still being done on the machine.

Condition: excellent (used), Year of construction: 1992, Control: CNC contouring control including color screen TRAUB TX 8 D TECHNICAL DATA Swing diameter over longitudinal slide: 560 mm Swing diameter over cross slide: 445 mm Turning diameter: 360 mm Turning length: 1000 mm Chuck diameter: 250/315 mm Spindle bore: 80 mm Drive power: 40 kW Speed range: up to 40 - 3150 rpm C-axis via separate servo motor Speed: 0.01 - 60 rpm Tool carrier: Number of turrets: 1 Number of tool holders: 14 Number of driven tools: 14 Power (at 40/20/10% duty cycle): 2.5/3.5/4.7 kW Max. speed: 2000 rpm Z-axis: 1070 mm X-axis: 285 mm Dkslijwfrk Sokun Djl Tailstock -Quill diameter 100 mm -Quill stroke 100 mm -Quill mount (DIN 228) MK 6 EQUIPMENT/ACCESSORIES  Hollow clamping cylinder  C-axis main spindle  Turret drive (14 driven tools)  Tailstock including live center  300 l coolant system, 2-stage pump 1.5/5 bar  Chip conveyor  Central lubrication system (with VOGEL piston distributor)  Measuring arm for measuring tools in the work area  Machine light  Three-jaw power chuck ø 250 mm FORKARDT 1512577 including clamping jaws  Mounting elements  Documentation

Condition: excellent (used), L & Z Lathe Center distance 1500 mm Center height 280 mm with digital display, with 2 axes 15 speeds from 24 - 2000 rpm Tool holder Parat WD 21/25 Delikuowc Nt Sen Djkl Transport dimensions: Length 2800 mm Width 900 mm Height 1700 mm

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, MORI SEIKI NLX 2500 SY/1250 in very good condition. Basic machine data: CNC high-performance lathe C-axis for main and counter spindle Manufacturer: MORI SEIKI Model: NLX 2500 SY / 1250 Year of manufacture: 2013 Dkelikuswfrkljn Dsl - MORI-APL (MORI-Automatic Programming System for Lathe) - Dongle - MARPOSS tool calibration - LTA oil mist extraction system - Knoll belt filter system - Numerous tools included Operating time: 8338 h Machining time: 4630 h Short bar loader: FMB SL 80 S Control system: Name: M730BM with MAPPS IV Manufacturer: Mitsubishi Type of CNC control system Technical details Working area: Turning diameter: 366 mm Max. turning length: 1255 mm Main drive: 1 Drive power (100% duty cycle) 15 kW Drive power (40% duty cycle) DC) 18.5 kW Speed range from - to 4000 rpm Main drive 2 Drive power (100% DC) 7.5 kW Drive power (40% DC) 11 kW Speed range from - to 6000 rpm Turning spindle (left) Spindle bore 91 mm Bar diameter 80 mm Turning spindle (right) Spindle bore 43 mm Slide 1 Longitudinal travel 1345 mm Cross travel 260 mm Vertical travel Y +/-50 mm Rapid traverse in X 30 m/min Rapid traverse in Z 30 m/min Rapid traverse in Y 10 m/min Tool holder 1 Number of Tool stations: 12 Maximum speed: 6000 rpm Maximum power (100% duty cycle): 3.7 kW Maximum power (40% duty cycle): 5.5 kW Installation dimensions: approx. (width x depth x height): 4.33 x 2.15 x 2.24 m Weight: approx. 8000 kg Equipment: KITAGAWA BB210A821 + KITAGAWA SS1881K21 hollow clamping device for the main spindle Power clamping device for the work spindle as a replacement for the standard clamping device, consisting of: - Hydraulic three-jaw power chuck with through-hole, type "Kitagawa BB210A821", diameter 254 mm, through-hole 81 mm, max. speed: 4,500 rpm - Drawbar for a maximum bar diameter of 80 mm - Hydraulic Hollow clamping cylinder, type "Kitagawa SS1881K21", Through 81 mm - Anti-rotation device and clamping travel monitoring (GS) Clamping device KITAGAWA B208A521 + HOWA C1SB115M4774 Tailstock specification for counter spindle Coolant system with increased pressure 5 bar Hinged belt conveyor, right-hand discharge Hinged belt chip conveyor with rollers in the version on the right side of the machine with an approx. 1,000 mm discharge height, including adjustment control Double foot switch with protective cover for main and counter spindle Foot switch for chuck operation on the main and counter spindle in the version with two pedals instead of the standard version with one pedal Can be inspected under power and is immediately available. Machine has only been running on oil!

Year of construction: 2001, Condition: good (used), CNC lathe Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L YEAR OF MANUFACTURE: 2001 2-axis CNC lathe with robotized loading Description: two-axis X-Z lathe for short workpieces and with a robotized workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Spindl: 4500 1/min Dksliek Hz Iwskun Dol Coolant system and chip conveyor

Condition: used, Year of construction: 2019, bar material dia. 32/38 mm spindle passage 44 mm turning length 320 mm turning speeds 200-8000 U/min c-axis 0,001 Grad gripping station 32/38 mm turning length 120 mm turning speeds 200-8000 U/min c-axis 0,001 0 number of tools 13 fix number of milling stations 4+5 driven control Mitsubishi Meldas Number of axles 5+2 St. total power requirement 7,5 kW weight of the machine ca. 2850 kg dimensions of the machine ca. 2,5 x 1,4 x 1,75 + Irco m CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloader Dkolikeuwv Tgjun Dol FMB turbo 3-36 equipped with swar- & coolant tank, fire distiguisher. ON/OFF 23.471h Running hours 21.495h GBL function (standard) LFV function: no

Condition: reconditioned (used), Year of construction: 2008, operating hours: 45,000 h, Emco Maxxturn 45 with Y-axis for sale + Bar feeder and accessories (can be viewed under power) Year of manufacture 2008 On-time hours: 45,000 Very good condition Delsv I Uaveikun Dokl Siemens control with ShopTurn High-pressure pump Has been overhauled and serviced Work performed: Main and counter spindle belts have been replaced! Geometry completely measured and adjusted. Drop tray bearings have been replaced Counter spindle slide plate + wiper have been replaced New main drive module + Complete Euro pallet with tools and various collets + Chucks for main and counter spindles, jaw chucks and collet chucks

Condition: excellent (used), Year of construction: 1990, Control: CNC contouring control including color screen TRAUB TX 8 D TECHNICAL DATA Swing diameter over longitudinal slide: 560 mm Swing diameter over cross slide: 445 mm Turning diameter: 360 mm Turning length: 1000 mm Chuck diameter: 250/315 mm Spindle bore: 80 mm Drive power: 40 kW Speed range: up to 40 - 3150 rpm Tool carrier: Number of turrets: 1 Number of tool holders: 14 Z-axis: 1070 mm X-axis: 285 mm Tailstock: -Quill diameter: 100 mm -Quill stroke: 100 mm EQUIPMENT/ACCESSORIES Hollow clamping cylinder -Tailstock including live center -Coolant system: 300 l, 2-stage pump 1.5/5 bar  Chip conveyor  Central lubrication (with VOGEL piston distributor)  Measuring arm for measuring tools in the work area  Machine light  Three-jaw power chuck ø 250 mm FORKARDT 1512577 including clamping jaws Dkjljwfrhwoikun Djl  Mounting elements  Documentation

Condition: used, Year of construction: 1994, turning diameter over bed 350 mm turning diameter over slide rest 310 mm turning length 700 mm total power requirement 4,6 kW weight of the machine ca. 1,0 t Dimensions (HxWxD) 2.200 x 1.300 x 1.175 mm --> Technical data Centre height: 175 mm --> Centre width: 800 mm --> Swing diameter over bed: 350 mm --> Swing diameter over support: 310 mm --> Gap length in front of the faceplate: 145 mm --> Cross slide travel: 205 mm --> Top slide travel: 100 mm --> Tool cross-section: 20x20 mm --> Bed Width: 220 mm --> Height: 300 mm --> Headstock Spindle bore: 46 mm --> Spindle nose: DIN 55027-5 --> Spindle inner taper: 1:20 --> Tool holder: MK-3 --> Spindle speeds: 18 --> Speed range: 25 - 2000 rpm --> Tailstock Quill diameter: 50 mm --> Quill inner taper: MK-3 --> Quill travel: 140 mm --> Lateral adjustment: 10 mm --> Feed range Number of feeds: 256 --> Longitudinal feeds (128): 0.042 - 0.929 mm Rev --> Cross feeds (128): 0.015 - 0.338 mm Rev Quick clamping device, 10 x collets, 3 - jaw chuck Multifix steel holder size B, 8 x inserts 2 x travelling steady rest, 2 x chuck flange Multiple stop, machine feet Operating instructions Dkjlikuswc Dzwon Djl

Condition: good (used), Good condition Electronic unit Dslisvnmmujkun Djkl Ready for delivery 4000 MM Steady rest

Condition: new, Year of construction: 2024, Functionality: fully functional, SIEMENS 840DE control system with 24" touch panel X = 275 mm, Z = 700 mm, Y = +50 / -40 mm Motor spindle up to 4,000 rpm with 65 mm through-bore 16-station BMT45 driven tools CNC tailstock Chip conveyor Glass scale on the X-axis High-pressure pump 15 bar SCHUNK spindle package NCE 260-81 BMT45 tool holder package (rotating and fixed tools) Packaging Free truck loading with crane Delikunoudapis Djkl

Condition: good (used), Year of construction: 1972, machine/vehicle number: 4224-06, center height: 240 mm, space requirement width: 1,600 mm, space requirement length: 2,650 mm, space requirement height: 1,200 mm, turning diameter: 200 mm, VDF Gebr. Boehringer 42D (WAG 831) Drawbar Lathe Manufacturer: VDF Gebr. Boehringer Model: 42 D Year of manufacture: 1972 Machine No.: 4224-06 General information / technical specifications: Used drawbar lathe from VDF Gebr. Boehringer Djlikuewfqwden Dskl Lathe chuck: Forkardt Ø250 mm wedge bars (power chuck) Center length / center width: 1000 mm Turning diameter: 200 mm (over support) Center height: 240 mm Spindle bore: approx. 62 mm Dimensions (h x w x d): 1200 mm x 1600 mm x 2650 mm Accessories: 2x Multifix brackets 2x clamping jaws Various turning tools Further information: Multifix Type B installed Including coolant device with tray

Condition: used, Year of construction: 1988, Functionality: unexamined, machine/vehicle number: 00374030, turning length: 2,000 mm, turning diameter over cross slide: 770 mm, turning diameter: 770 mm, spindle speed (max.): 1,800 rpm, tool mount: 40 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, total height: 2,125 mm, total length: 5,690 mm, chuck outer diameter: 250 mm, total width: 2,900 mm, overall weight: 8,500 kg, Equipment: rotational speed infinitely variable, The Heyligenstaedt 24 U / 2000 CNC lathe, built in 1988, is in very good and well-maintained condition, but was last used in production in 2023. The machine is equipped with extensive accessories (see photos) and can be inspected at the production site AQUAtec Machining AG Industriepark, 6460 Altdorf, Switzerland, upon request. Dslikunowfqvmo Dekl

Condition: good (used), Year of construction: 2007, operating hours: 45,711 h, Functionality: fully functional, machine/vehicle number: 210011, Used machine, all the time maintained by machine supplier. Still connected to electricity, pressure air, etc. Can be inspected anytime. Technical specification: Number of spindles: 6 Max. diameter of machined bar: 18 mm Bar feeder IEMCA SIR MS18 F – 3 m bars Axes: Tool carriers: - transverse shifts (positions 1.1; 2.2; 3.1; 3.2; 4.1; 4.2; 5.1; 5.2) Djlovrikqsikun Dskl - max. count: 8 - axes: X 35 mm, Z 85 mm, Y 20 mm Transverse unit (position 6.0) - max. count: 1 - axes: X 35 mm, Z 85 mm Longitudinal units (position 1.2; 2.1) - max. count: 2 - axis: Z 85 mm Rear unit and drilling units - max. count: 7 - driven tools: max. 4 Scara - Robot - X-Y-Z-NC (position 6.1; 6.2) - max. count: 2 - axes: Z 85 mm, X 503 mm, Y 180 mm - X-Z-NC (position 1.2; 2.1) - max. count: 2 - axes: Z 85 mm, X 14 mm

Condition: good (used), Year of construction: 2018, Functionality: fully functional, TECHNICAL DATA Swing diameter -over bed 290 mm -over cross slide 146 mm Center height 145 mm Center distance (between centers) 500 mm Turning length 470 mm Dslswfqp Tjikun Djkl Drive power (100/40% duty cycle) 5.5/11 kW Spindle bore 43 mm Speed range 30 – 4000 rpm Quick-change tool holder MULTIFIX size A Tailstock with handwheel Quill diameter 45 mm Adapter taper DIN 228 MK 3 Quill stroke 82 mm EQUIPMENT/ACCESSORIES  Numerical position display with flat screen 2-axis GDW NP 20  Chuck protection sliding cover, electrically locked  Rear chip guard  Quick-change tool post MULTIFIX size A, including 10 holders  Lever-type quick-clamping device for draw-type collet DIN 6341-K 32 (386 E) including collet set  Tailstock with handwheel including live center  Coolant system  Three-jaw chuck RÖHM 160 ZS 160 including clamping jaws  Various accessories  Documentation  Mounting elements

Condition: new, turning length: 440 mm, turning diameter: 550 mm, Siemens system Maximum Swing Over Bed 550mm Maximum Machining Diameter 450mm Maximum Machining Length 440mm Maximum Swing Over Slide 320mm Spindle "200-A2-6 NN3020-100BTR/NN3018" Spindle speed range 0-4500rpm Spindle bore 66mm Chuck Size 8''hydraulic chuck Ballscrew Specifications X-3210-THK/Z-3210-THK Linear Guide Specifications X-35-PMI/Z-35-PMI Ballscrew Bearings X-2562/Z-2562 X-Axis Travel 510mm Z-Axis Travel 620mm Y-Axis Travel ±50mm Dkslikuowfqkwon Del Tailstock sleeve travels 450mm Tailstock sleeve taper MT5# X/Z Axis Rapid Traverse Speed 24/24m/min X/Z Axis Repeatability 0.003mm Power of Servo Spindle Motor 11KW Overall Dimensions 2405*1767*1740mm Weight (Approx.) 3500KG Tailstock type Servo tailstock Power turret BMT45Y-15-364

Condition: good (used), Year of construction: 2002, CNC LATHE MUPEM WIN 65 2002 Max. bar capacity: 65 mm Front spindle bearing diameter: 110/150 mm Collet clamping system up to Ø: 60 mm HAINBUCH collet system up to Ø: 65 mm Maximum spindle speed: 3000 rpm Dkolswc Arueikun Djl Main spindle motor power: 11/15 kW MAIN TURRET Number of tools: 8 VDI-30 Maximum working stroke in Z: 50 mm Rapid traverse speed: 15 m/min Feed force: 6790 N CROSS SLIDE Number of horizontal slides: 2 Maximum working stroke at X1/X2: 70 mm Feed force at X1/X2: 8000 at 50 bar Maximum working stroke at Z1: 230 mm ADDITIONAL LOWER TURRET Number of tools: 8 VDI-20 VERTICAL SLIDES Number of vertical slides: 2 Maximum working stroke in X3 / X4: 70 mm Manual length adjustment: 50 mm Rapid traverse speed: 15 m/min Feed force at X1 / X2: 8000 at 50 bar Machine height: 1700 mm Machine area: 2900 x 1700 mm Machine weight: 4100 kg

Condition: new, spindle bore: 82 mm, turning length: 2,000 mm, turning diameter: 500 mm, Siemens 808DA system Chuck size 10''hydraulic hollow chuck Maximum swing diameter over bed 500mm Maximum swing diameter over carriage 290mm Bed guide rail width 405mm Maximum machining length 2000 Spindle speed range 45-1600rpm Spindle through hole 82mm Spindle nose A2-8 Spindle taper Metric 90# X-axis travel 295mm Z-axis travel 2000 X/Z axis rapid traverse speed 6/8m/min Tool holder type Electric tool post Number of tool positions 4 stations Tool holder size 25*25 Tailstock sleeve diameter 75mm Tailstock sleeve travels 150mm Tailstock live center taper MT5 Main motor power 7.5KW Cooling pump power 210W Machine overall dimensions 3800*1600*2000 Net weight (approx.) 2700kg Dolikuswfqkkjn Djkl

Condition: excellent (used), Year of construction: 1991, Multi-spindle & bar turning machines TRAUB TD 26 1991 * Spindle power 2.2 kW * Number of spindles 4 * Spindle bore 26 mm * Speeds 1.18 > 4750 mm * Total power 3.2 kW * Length L - R 1800 mm * Width V - H 1000 mm * Height 1400 mm * Weight 800 kg * Tool changer 6 tools Additional information Dkelswc Aqwoikun Del * Max. round: 26 mm, max. square: 18 mm, max. hexagon: 22 mm * * Bar loader available

Condition: excellent (used), Multi-spindle & bar-turning lathes Dkjlowc Aqdeikun Del TRAUB TK 42 * Spindle power 5.5 - 9 kW * Maximum workpiece length 206 mm * Spindle bore 42 mm * Length L - R 2500 mm * Width V - H 900 mm * Height 1700 mm * Tool changer holder 4 slides