Condition: excellent (used), Year of construction: 2019, operating hours: 15,000 h, Functionality: fully functional, CNC lathe MAZAK QT-Compact 200MY L-SmoothC 0500U Control: Mazatrol On-time hours: 15,000h Spindle hours: 5,000h Main spindle chuck diameter: 8" Max. swing diameter: 695mm Standard machining diameter: 235mm Max. machining diameter: 340mm Max. bar diameter main spindle: 65mm Distance between spindle end and turret: 81-686mm Max. workpiece weight chuck machining including chuck main spindle: 200kg Max. workpiece weight shaft machining including chuck main spindle: 500 Main spindle Speed: 5,000 rpm Spindle nose: JIS A2-6 Spindle bore: 76mm Power: 15 kW Rated power continuous operation: 11kW max. torque: 167Nm Tailstock Mount: MK5 Travel range: 565mm Max. pressing force: 5,000 N   Turret: Number of tool positions: 12 Tool cross-section: 25x25mm Boring bar diameter: 40mm Tool size drilling/milling cutter: 20mm Tap: M20 Dkslqz Uowgah Iswysl Milling spindle power: 3.7 kW AGWs speed: 4,500 rpm AGWs torque: 47Nm   Automation HALTER Load Assistant S-230-35 including 3-finger gripper, cable set, interface box

Condition: used, spindle bore: 50 mm, center height: 265 mm, turning length: 900 mm, Okuma LS Turning length: 900 mm. Spindle height: 265 mm. Drilling: Approx. Ø50 mm. The gearbox growls a little but runs well. Dkelqz Uevt Nwtewysl Can be loaded onto a trailer. Can be delivered at an additional cost.

Condition: excellent (used), Functionality: fully functional, spindle bore: 52 mm, center height: 200 mm, turning length: 1,150 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 40 rpm, PINACHO S-90/200 precision center lathe with digital display. Dkelqz Uwjvplw Ioyol Condition: Fully functional Year of manufacture: 2001 Storage location: Graz Condition: Very good Technical specifications: Center height: 200 mm Center distance: 1150 mm Permissible diameter over guide bed: 400 mm Permissible diameter over bed offset: 600 mm Permissible diameter over longitudinal slide: 370 mm Permissible diameter over cross slide: 210 mm Bed width: 300 mm Length of offset in front of the faceplate: 160 mm Headstock: 12 spindle speeds: 40 - 2200 rpm Spindle bore: 52 mm Morse taper spindle: 4 Feed rates - longitudinal: 0.05 - 0.75 mm/rev Spindle motor: 4 kW Machine weight approx.: 1.3 t Space required approx.: 2.5 x 0.9 x 1.7 m Tailstock quill diameter: 58 mm Tailstock quill stroke: 155 mm Included: - Digital display - Tailstock - Multifix base holder - Visible turning tools - Stainless steel tray The machine is located in Graz and is in very good condition. A viewing of the machine can be arranged on-site or via video call. Contact us for further information and to schedule a viewing!

Condition: excellent (used), Year of construction: 1994, Automatic CNC lathe Index GS42 Control Index C200-4 (Sinumerik S3TT) Spindle clearance 42mm, two machining heads (turrets) Turret 1 - X=120mm, Z=220mm, number of tools 12 including 6 driven, capture Turret 2 - X=120mm, Z=80mm, the number of tools 8 including 4 driven Dynamic C axis Dkolqzsiph Eqo Uwyol Bar feeder with magazine MINI SPRINT 3500mm and a set of reducing bushings Set of collets - 10 pieces Driven holders - 3 pieces Standard holders VDI20 - 5 pieces Machine in 100% working order and in perfect condition (keeps dimensions to 0.001mm)

Condition: good (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 14038, turning diameter over cross slide: 470 mm, turning length: 4,000 mm, turning diameter: 720 mm, spindle bore: 104 mm, spindle speed (max.): 1,600 rpm, Geminis GHT 4 G2 - 700 x 4000 G teach-in lathe with Heidenhain control. Specifications: Heidenhain control Turning diameter over the bed 720mm Turning diameter over the cross slide 470mm Distance between the centers 4000mm Main spindle passage 104mm Speed 0-1600rpm Motor power 17kW Dkolqz Uwowf U Eljyel Dimensions 6600x2300mm Weight approx. 6500kg Machine equipped with: 4-jaw fixed steady Parrat betel holder with 3 holders Chips conveyor

Condition: good (used), Manufacturer Franz Kessler DME type 4640.6.F0S Dksled Hu Ayoqz Uwysl Type motor spindle for vertical Hessap lathe (installed by Hessapp DVH 250 BJ. 1996) Motor Rexroth 1MS310B-6B-A2/S011 including extras Röhm 3 jaw Chuck type KFD HS 250/3 Röhm full chip cylinder type OVS 85 Balluff encoder state used fully functional

Condition: excellent (used), Available: Immediately Dkjlqzjpr Uu Uo Uwysl

Condition: good (used), Functionality: unexamined, turning diameter: 260 mm, turning diameter over bed slide: 200 mm, turning length: 1,200 mm, total length: 2,200 mm, total width: 800 mm, total height: 1,400 mm, overall weight: 1,000 kg, bar passage: 55 mm, EQUIPMENT: - Tailstock - Three-jaw chuck (Ø 200 mm) Dkolqzjwdpnfo Uwyol

Condition: good (used), USB, 22kw, gearbox, 3400rpm, A2-8 spindle 102mm bore, chipconveyor, Toolsetter, rigid tapping, M19, VDI40 12 station turret, part catcher, Hainbuch SK80, Iemca bardeeder 1600mm Dkjlqz Uweviyu Ujyjl

Condition: excellent (used), Year of construction: 2006, operating hours: 8,768 h, Sell CNC lathe DMG Gildemeister CTX310 Control : Siemens 840D powerline Shopturn Year of manufacture : 2006 Model : CTX 310 ITALLY X axis travel - 202mm Z axis travel - 450mm Duplomatic head 12 tools VDI30, without driven tools Machine with a very large number of parts!!! Dkelottgv Ujqz Uwysl Toolholders! Lathe knives!!! Huge number of brushes!!! 2 Cabinets included!

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, turning length: 1,524 mm, turning diameter over cross slide: 760 mm, turning diameter: 760 mm, spindle motor power: 40,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 3,300 rpm, spindle bore: 112 mm, Mazak Intergrex 400-III x 1500 Mazatrol 640MT Pro Dkolewf Nl Hoqz Uwyol Max. turning Ø: 760mm X-axis: 630mm Y-axis: 230mm Z-Axis: 1585mm B Axis: 225° Spindle bore: 80mm Speed range: 35-3300Rpm B-Axis Speedranges:12000Rpm B-Axis power: 19kW CAPTO C6 Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14000kg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 13,250 h, Functionality: fully functional, machine/vehicle number: 01360009611, The machine is in very good condition. Dkolqz Uwewf Nixeysl Machine with counter spindle, single turret, and Y-axis. New spindle installed in 2017. (Main spindle)

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 2111 & 0321, Used CTV250s for sale, built in 2004. ---- Please state your offer price for 1 or 2 used CTV250s, built in 2004. Serial No. ... 2111 & 0321 Delqz Uwsvftpkeyskl Sale only within the European Union (EU), including Switzerland, Turkey, and Great Britain ----- Our line, consisting of four identical CTV250s from 2004 and 2007, is for sale. The machines can operate individually. Bids can be placed for 1-2 units of this model year. The machines are connected to a central lubricating oil supply. The machines are delivered without the robot. The machines are currently in series production and will be shut down approximately in the third quarter of 2025. A visit is possible at any time by arrangement. Scope of delivery: Machine, clamping tools, chip conveyor. P Not included in delivery: Kuka robot ----- Without packaging; any warranty claims are excluded. If you wish to disassemble the system yourself, please provide appropriate information in your bid. We assume no liability for the accuracy of the technical data, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: good (used), Year of construction: 1977, Functionality: unexamined, machine/vehicle number: 218758, spindle bore: 53 mm, turning diameter: 520 mm, turning diameter over bed slide: 320 mm, turning length: 1,500 mm, total length: 4,000 mm, total width: 1,500 mm, total height: 1,800 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 31 rpm, overall weight: 1,500 kg, EQUIPMENT: - Tailstock Dolqowdn Nnoz Uwyokl - Multifix turning tool holder

Condition: used, Year of construction: 2003, Functionality: fully functional, Machine without bar loader tool resetter included Dkjlqz Uewf Nbbjwyol n. 2 collet holders n. 1 high pressure Max. workable diameter from bar mm 70 Max. workable diameter from recovery mm 240 Max. workable length mm 250 Max. rotating diameter mm 520 SPINDLE: Max. rotation speed rpm 4000 ASA spindle nose 6" Spindle hole mm 80 Internal diameter of bearings mm 110 Self-centering diameter mm 165/210 Motor power kW 26 COUNTER-HEAD: Max. rotation speed rpm 4000 ASA spindle nose 5" Spindle hole mm 55 Useful through hole Mm 45 Internal diameter of bearings mm 80 Self-centering diameter mm 165 Motor power kW 11 Offset stroke mm 120 TURRETS: Number of positions mm 12 Rotation time (1pos) Sec 0.15 Driven tools: n of positions n. pos 12 Max rotation speed RPM 4000 Motor power of driven tools Kw 3.7 X1/2 axis rapid stroke Mm-m/min 160-20 Z1/2 axis rapid stroke Mm-m/min 390-24 Y1 axis rapid stroke Mm-m/min 100-6 DIMENSIONS-WEIGHT: Overall dimensions with chip conveyor mm 4150 x 2100 x 2200 h Height of main spindle centre mm 1060 Weight with chip conveyor kg 6900

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister type TWIN 65 RG 2 year 2008 with Siemens 840 D Maximum turning length (travel in the Z axis) 650 mm Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Maximum main spindle power 35 kW Spindle diameter 65 mm Minimum main spindle speed 20 1/min Dkelqz Uoq T I Izswysl Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Lathe height 2500 mm Lathe weight 10 t Machine equipment Y axis Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Technical data Errors excepted Please note that the machine is sold without chucks, as these remain with the seller!

Condition: used, Functionality: fully functional, machine/vehicle number: 51294, Mazak QT-20-U CNC Lathe (CNC Lathe) Dkelqz Uwewf E S Noysl

Condition: excellent (used), Four-jaw chuck make Roto Record type DHK 315 x 4 short taper size 8 taper diameter 139,735 bolt circle diameter 171,4 mm Delqz Uweg Rxh Ioyskl diameter 315 mm Jaws individually adjustable

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 3141 & 3151, Used CTV250s for sale, built in 2007. ---- Please state your offer price for 1 or 2 used CTV250s, built in 2007. Serial No. ... 3141 & 3151 Sale only within the European Union (EU), including Switzerland, Turkey, and Great Britain ----- Our line, consisting of four identical CTV250s from 2004 and 2007, is for sale. Delqzsvft I To Uwyekl The machines can operate individually. Bids can be placed for 1-2 units of this model year. The machines are connected to a central lubricating oil supply. The machines are delivered without the robot. The machines are currently in series production and will be shut down approximately in the third quarter of 2025. A visit is possible at any time by appointment. Scope of delivery: Machine, clamping tools, chip conveyor. Not included in delivery: Kuka robot ----- Without packaging; any warranty claims are excluded. If you wish to disassemble the system yourself, please provide appropriate information in your bid. We assume no liability for the accuracy of the technical data, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: good (used), Year of construction: 1980, Functionality: unexamined, machine/vehicle number: C20018, spindle bore: 53 mm, turning diameter: 460 mm, turning diameter over bed slide: 240 mm, turning length: 1,000 mm, total length: 2,200 mm, total width: 1,000 mm, total height: 1,300 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 32 rpm, EQUIPMENT: - Tailstock Delewdn Htsqz Uwyjkl - Four-jaw chuck, diameter: 200 mm

Condition: used, Functionality: fully functional, Automatic lathe Index B60 (Lathe) Dkolqzowf E N Io Uwyol

Condition: ready for operation (used), Year of construction: 1987, Lathe Make Heidenreich & Harbeck type Hanseat 480 YEAR 1987 center height 255 mm turning diameter over support 300 mm center distance 1500 mm 24 speeds from 23.6 to 2500 n1/min tailstock MK 4 chuck F 250 digital display make Heidenhain Dolqspviqisz Uwyekl motor 380 volt 11 kw transport dimension: length 3200 mm width 1200 mm height 1550 mm Weight 2,5 to.

Condition: used, Functionality: fully functional, Index B42 Lathe (Lathe) Dslqzewf E E Ao Uwyskl

Condition: used, Functionality: fully functional, Automatic lathe Traub TB60 Dkjlqzowf E Dfo Uwyol

Condition: used, Functionality: fully functional, Automatic Lathe Dkslqz Uewf Ez Dewyjl