Condition: good (used), USB, 22kw, gearbox, 3400rpm, A2-8 spindle 102mm bore, chipconveyor, Toolsetter, rigid tapping, M19, VDI40 12 station turret, part catcher, Hainbuch SK80, Iemca bardeeder 1600mm Dcoln Uxeviyu Ue N Isg

Condition: good (used), Functionality: unexamined, turning diameter: 260 mm, turning diameter over bed slide: 200 mm, turning length: 1,200 mm, total length: 2,200 mm, total width: 800 mm, total height: 1,400 mm, overall weight: 1,000 kg, bar passage: 55 mm, EQUIPMENT: - Tailstock Deln Uswdpnfex N Iecg - Three-jaw chuck (Ø 200 mm)

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, turning length: 1,524 mm, turning diameter over cross slide: 760 mm, turning diameter: 760 mm, spindle motor power: 40,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 3,300 rpm, spindle bore: 112 mm, Mazak Intergrex 400-III x 1500 Mazatrol 640MT Pro Max. turning Ø: 760mm X-axis: 630mm Y-axis: 230mm Z-Axis: 1585mm B Axis: 225° Spindle bore: 80mm Speed range: 35-3300Rpm B-Axis Speedranges:12000Rpm B-Axis power: 19kW CAPTO C6 Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14000kg Doln Ujwf Nl Hex N Iocg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 13,250 h, Functionality: fully functional, machine/vehicle number: 01360009611, The machine is in very good condition. Dcoln Uowf Nixox N Iog Machine with counter spindle, single turret, and Y-axis. New spindle installed in 2017. (Main spindle)

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 2111 & 0321, Used CTV250s for sale, built in 2004. ---- Please state your offer price for 1 or 2 used CTV250s, built in 2004. Serial No. ... 2111 & 0321 Sale only within the European Union (EU), including Switzerland, Turkey, and Great Britain ----- Dcoln Uxovftpkj N Ijg Our line, consisting of four identical CTV250s from 2004 and 2007, is for sale. The machines can operate individually. Bids can be placed for 1-2 units of this model year. The machines are connected to a central lubricating oil supply. The machines are delivered without the robot. The machines are currently in series production and will be shut down approximately in the third quarter of 2025. A visit is possible at any time by arrangement. Scope of delivery: Machine, clamping tools, chip conveyor. P Not included in delivery: Kuka robot ----- Without packaging; any warranty claims are excluded. If you wish to disassemble the system yourself, please provide appropriate information in your bid. We assume no liability for the accuracy of the technical data, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: used, Year of construction: 2003, Functionality: fully functional, Machine without bar loader tool resetter included n. 2 collet holders n. 1 high pressure Max. workable diameter from bar mm 70 Max. workable diameter from recovery mm 240 Max. workable length mm 250 Max. rotating diameter mm 520 SPINDLE: Max. rotation speed rpm 4000 ASA spindle nose 6" Spindle hole mm 80 Internal diameter of bearings mm 110 Self-centering diameter mm 165/210 Motor power kW 26 COUNTER-HEAD: Max. rotation speed rpm 4000 Dcelowf Nbbjn Ux N Ijg ASA spindle nose 5" Spindle hole mm 55 Useful through hole Mm 45 Internal diameter of bearings mm 80 Self-centering diameter mm 165 Motor power kW 11 Offset stroke mm 120 TURRETS: Number of positions mm 12 Rotation time (1pos) Sec 0.15 Driven tools: n of positions n. pos 12 Max rotation speed RPM 4000 Motor power of driven tools Kw 3.7 X1/2 axis rapid stroke Mm-m/min 160-20 Z1/2 axis rapid stroke Mm-m/min 390-24 Y1 axis rapid stroke Mm-m/min 100-6 DIMENSIONS-WEIGHT: Overall dimensions with chip conveyor mm 4150 x 2100 x 2200 h Height of main spindle centre mm 1060 Weight with chip conveyor kg 6900

Condition: used, Functionality: fully functional, machine/vehicle number: 51294, Mazak QT-20-U CNC Lathe (CNC Lathe) Deln Uxswf E S Nj N Iscg

Condition: good (used), Year of construction: 1977, Functionality: unexamined, machine/vehicle number: 218758, spindle bore: 53 mm, turning diameter: 520 mm, turning diameter over bed slide: 320 mm, turning length: 1,500 mm, total length: 4,000 mm, total width: 1,500 mm, total height: 1,800 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 31 rpm, overall weight: 1,500 kg, EQUIPMENT: Dcslowdn Nnon Ux N Isg - Tailstock - Multifix turning tool holder

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister type TWIN 65 RG 2 year 2008 with Siemens 840 D Maximum turning length (travel in the Z axis) 650 mm Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Maximum main spindle power 35 kW Spindle diameter 65 mm Minimum main spindle speed 20 1/min Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Djlnsq T I Ize Ux N Iecg Lathe height 2500 mm Lathe weight 10 t Machine equipment Y axis Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Technical data Errors excepted Please note that the machine is sold without chucks, as these remain with the seller!

Condition: good (used), Year of construction: 2016, Functionality: fully functional, turning length: 760 mm, turning diameter: 376 mm, spindle bore: 76 mm, spindle speed (max.): 4,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Sub-spindle: 4500 1/min Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw Tool speed max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) Dslnjvx Tx Eo Ux N Iecg C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight.: 6000 kg

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 3141 & 3151, Used CTV250s for sale, built in 2007. ---- Please state your offer price for 1 or 2 used CTV250s, built in 2007. Serial No. ... 3141 & 3151 Sale only within the European Union (EU), including Switzerland, Turkey, and Great Britain ----- Our line, consisting of four identical CTV250s from 2004 and 2007, is for sale. The machines can operate individually. Dcoln Usvft I Tex N Ijg Bids can be placed for 1-2 units of this model year. The machines are connected to a central lubricating oil supply. The machines are delivered without the robot. The machines are currently in series production and will be shut down approximately in the third quarter of 2025. A visit is possible at any time by appointment. Scope of delivery: Machine, clamping tools, chip conveyor. Not included in delivery: Kuka robot ----- Without packaging; any warranty claims are excluded. If you wish to disassemble the system yourself, please provide appropriate information in your bid. We assume no liability for the accuracy of the technical data, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: repair required (used), Functionality: not functional, machine/vehicle number: 235/01, CONTROL DEFECTIVE! Lathe not functional! - Turning diameter: 500 mm - Turning length: 1500 mm Dcoln Uxjwf Dglo N Isg - Control: Monforts Control System K (DEFECT!!!) - Turning diameter over bed slide: 290 mm - Spindle speeds: 3 - 2800 rpm - Spindle power: 15 kW - Torque on the spindle: 1530 Nm - Rapid traverse: - longitudinal/face 10 / 5 m/min - Bed width: 360 mm - Face slide travel: 265 mm - Upper slide travel: 140 mm - Tailstock quill diameter: 80 mm - Tailstock quill stroke: 160 mm - Machine weight: approx. 3.3 t - Machine dimensions: L x W x H 3.45 x 1.65 x 1.93 m - With tool cabinet including tools (see pictures)

Condition: used, Functionality: fully functional, Automatic lathe Index B60 (Lathe) Dsln Ujwf E N Ijx N Iocg

Condition: good (used), Year of construction: 1980, Functionality: unexamined, machine/vehicle number: C20018, spindle bore: 53 mm, turning diameter: 460 mm, turning diameter over bed slide: 240 mm, turning length: 1,000 mm, total length: 2,200 mm, total width: 1,000 mm, total height: 1,300 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 32 rpm, EQUIPMENT: - Tailstock - Four-jaw chuck, diameter: 200 mm Dcslnowdn Hto Ux N Ieg

Condition: excellent (used), Four-jaw chuck make Roto Record type DHK 315 x 4 short taper size 8 taper diameter 139,735 Dolneg Rxh Ij Ux N Iscg bolt circle diameter 171,4 mm diameter 315 mm Jaws individually adjustable

Condition: good (used), Year of construction: 2015, turning length: 760 mm, turning diameter: 376 mm, spindle speed (max.): 3,500 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, overall weight: 6,000 kg, Equipment: rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw Djln Ux Neuqh H Re Iscg S2max=5000 1/min X movement range: 260mm Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg

Condition: excellent (used), Year of construction: 2000, MAZAK SUPER QUICK TURN 200M x 500 Max. machining diameter: 300 mm Max. machining length: 538 mm Max. spindle speed: 5,000 rpm Max. milling speed: 4,500 rpm Max. bar diameter: 51 mm Machine is equipped with: - CNC control: Mazatrol PC Fusion CNC 640T - KITAGAWA three-jaw chuck B-208, diameter 210 mm Dslnev Nv Ide Ux N Iscg - Tool Eye - C-axis - NC tailstock - Reinforced coolant pump - MAYFRAN chip conveyor - 8 stationary tool holders - 2 driven tool holders

Year of construction: 2012, operating hours: 72,663 h, Condition: ready for operation (used), Control Unit Brand MITSUBISHI Model M700 Additional Equipment Optional used loading magazine available, requires adaptation as it is from a different machine. This Biglia B436Y2 was manufactured in 2012. A reliable horizontal turning machine, it's ideal for precision machining. Consider the opportunity to buy this Biglia B436Y2 horizontal turning machine. Contact us for more information. Delowdkquon Ux N Iocg Application Types Turning

Condition: used, Functionality: fully functional, Index B42 Lathe (Lathe) Dcjlnewf E E Ae Ux N Ieg

Year of construction: 2025, Condition: used, Functionality: unexamined, machine/vehicle number: 5-13540, The machine should run after conexion. Deln Uxowdqmve N Iscg

Condition: ready for operation (used), Year of construction: 1987, Lathe Make Heidenreich & Harbeck type Hanseat 480 YEAR 1987 center height 255 mm turning diameter over support 300 mm center distance 1500 mm 24 speeds from 23.6 to 2500 n1/min tailstock MK 4 chuck F 250 digital display make Heidenhain motor 380 volt 11 kw transport dimension: length 3200 mm width 1200 mm height 1550 mm Dcsln Uxepviqie N Isg Weight 2,5 to.

Condition: good (used), Year of construction: 2011, Functionality: fully functional, CNC Turning Center with Bar Loader Manufacturer: Miyano Type: ABX-64SYY Year of Manufacture: 2011/06 Control: Fanuc 31i-B Technical Specifications: Workpiece Length SP1/SP2: 118mm / 125mm Bar Diameter: 64mm Turning Diameter: 165mm Number of Turrets: 2 Dcjlnowdh U Ro Ux N Isg Speed: 6,000 rpm Machine Weight: 11,000kg

Condition: used, Functionality: fully functional, Automatic lathe Traub TB60 Dcsln Uxewf E Dfe N Ieg

Condition: excellent (used), Lathe Make Weiler Type MD 125 Dcjln Ux Netgnhue Isg Collet chuck device Hand lever cross support Speed from 110 - 3600 n1/min approx. %0 Collets Adapter for bell collets Coolant device SPH 125 mm SPW 400 mm 380 volt 1.5 kw

Condition: used, Functionality: fully functional, Automatic Lathe Deln Uewf Ez Djx N Iecg