Condition: reconditioned (used), Year of construction: 1995, Functionality: fully functional, turning diameter over cross slide: 650 mm, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 3,000 mm, total length: 5,500 mm, total width: 1,500 mm, total height: 1,500 mm, overall weight: 10,500 kg, workpiece weight (max.): 6,000 kg, spindle mount: MK 6, Used universal lathe PORĘBA TRP-93/3M, year of manufacture 1995, has been inspected and externally overhauled by us. The delivery includes a steady rest with a diameter of 450 mm and a 4-jaw lathe chuck with a diameter of 800 mm. Availability: the machine is available immediately, under power, technical inspection at any time Technical data: - Distance between centers/turning length: 3000 mm - Turning diameter over bed: 930 mm - Turning diameter over support: 650 mm - Turning diameter in the bridge recess: 1150 mm - Spindle bore diameter: 95 mm - Maximum workpiece weight between centers: 6000 kg - Maximum workpiece weight between centers + 1 steady rest: 7600 kg - Maximum workpiece weight between centers + 2 steady rests: 9200 kg - Number of spindle speeds: 21 - Speed ​​range (rpm): 5 - 800 - Motor power [kW]: 17/27 (gear 1/gear 2) - Overall dimensions: - Total length: 5500 mm Cobvdewdv Rmjlcvsgt - Width: 1500 mm - Height: 1500 mm - Total weight: 10,500 kg Additional equipment included in the scope of delivery: - 1 x steady rest with a diameter of 450 mm - 1 x 4-jaw chuck with a diameter of 800 mm.

Condition: ready for operation (used), Year of construction: 1990, CNC Turning Machine Fabr.MONFORTS Type: RNC 4 Year 1990 Control FANUC 10TF-FAPT. Cobvevgcwaodlcvogt Turning diameter max:250 mm Turning length : 1000 mm Spindle speed: 70-4000 rpm Spindle passage: 65 mm Hollow clamping device Chuck diameter 250 mm Röhm Tool turret 12 Pos.VDI 40 Tailstock MK 4 Complete machine documentation, chip conveyor. Complete weight approx. 7 500 kg.

Condition: excellent (used), Pull down jaws (28370) Cgjbvdelrp N Hslcvot Make Hilma type BZT 160 3722-04 well suited for bright drawn material weight 3,5 kg

Condition: reconditioned (used), Year of construction: 2001, Functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, ATTENTION: THIS MACHINE AT A ONE-TIME SPECIAL PRICE. General description: Year of construction: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control: Fanuc 21i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations The machine does not have a life tool. Csbvetpu Szedlcvjgt Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: -Machine was completely dismantled, cleaned and repainted, The main spindle was re-supported -The guides and guide shoes were replaced in the X-axis and Z-axis -The ball screw in the X-axis and Z-axis was replaced -New unit for central lubrication and new hoses -Hydraulic unit was checked and serviced. Drive coupling between motor and pump was replaced -Cooling unit was checked and serviced: Temperature difference controller was replaced - Clamping cylinder was re-mounted and sealed. Gearbox of the A-axis was re-mounted and coupling between motor and gearbox was replaced -Electrical cabinet was cleaned -Control panel was replaced -New screen -New interior lighting -Turret was dismantled, wearing parts checked, cleaned and resealed -Cleaned turret encoder and encoder wheel -Length measuring systems in X-axis and Z-axis disassembled and cleaned -Pick-up station springs replaced -X-axis and Z-axis motors were checked for bearing damage -The windows on the work door were replaced. -The chip conveyor was completely dismantled, re-stored, cleaned and painted -Of course, various small parts of the machine were also replaced The product has been described by us with the utmost care. The description is non-binding and should be checked during an inspection.

Condition: excellent (used), Year of construction: 2021, operating hours: 5,800 h, Functionality: fully functional, machine/vehicle number: A320A/2935, Accessories: Documentation Various tool holders, clamping sleeves, etc. MH 500 chip conveyor Coolant system with high-pressure pump CO2 fire extinguishing system Cgjbjwdukrsvdlcvot Parts catcher Signal lamp Counter spindle Interface for bar loader FMB minimag 20 / 3200 "C" bar loader C-axis Hydraulic unit Collet chuck Available from approximately July-August 2025

Condition: new, Year of construction: 2025, Attention - Promotion!! Completely free first warranty inspection - special offer only for Customers who took part in the show before purchase - at the Otinus machine showroom in Bydgoszcz. CNC lathe HLC-4055 on Fanuc 0i TF control Machining range: - Max. turning diameter over bed: Φ 560 mm - Max. turning diameter over support: Φ 320 mm - Max. turning diameter: Φ 400 mm - Max. turning length: 548 mm - Distance from spindle center to ground: 980 mm - Travel range in X axis: 210 mm - Travel range in Z axis: 610 mm Tool head: - Turret type: Hydraulic V12 - Outer dimension: 25x25 mm - Inner diameter: Φ 40 mm - Indexing time: Φ 0.55 s Spindle: - Drive type: Belt transmission - Maximum spindle speed: 4500 o/min - Power consumption - 15 min: 11/15 kW - Torque - 15 min: 140/250 Nm - Spindle nose: JISA2-6 - Spindle through hole: Φ 76 mm - Maximum workpiece diameter: Φ 50 mm - Spindle front bearing diameter: Φ 100 mm Cobvowdt Szjdlcvogt - Spindle diameter: 208 mm Feed speed: - Rapid traverse X: 24 m/min - Rapid traverse Z: 30 m/min - Servo motor power X/Z: 1.8/1.8 kW Tailstock: - Tailstock quill diameter: Φ 100 mm - Centering type: MT NO.4 - Quill stroke: 120 mm - Travel range: 410 mm Other parameters: - Control: FANUC - Power supply: 25 kVA - Coolant tank volume: 200 l - Machine weight: 4.5 t - Dimensions [length × width × height]: 4200×2050×1850 mm

Condition: like new (used), Year of construction: 2005, Cazeneuve CNC Lathe Model OPTIMAX 360 Year 2005 Turning length 610 mm Turning diameter 360 mm Bed diameter 360 mm Slide diameter 200 mm Center distance 610 mm X axis 180 mm Z axis 610 mm Spindle nose MT 6 Spindle bore 54 mm Cgjbvdlcowb Uk Hovet Number of turrets - 1 Number of tools - 8 VDI 20 turret Selection of turning tools 16 x 16 mm Boring bar diameter 25 mm Rotation speed 4200 rpm Spindle motor capacity 7.5 kW Dimensions: 1950 x 1320 x 1640 mm Weight 2100 kg

Condition: good (used), Year of construction: 1980, CNC Karuselldrehmaschine Fabr.JUNGENTHAL type: JU8F BJ. 1980 Modenisiert 2005 control HEIDENHAIN Manaul plus 4110. Max.Drehdurchmesser: 930mm Circular diameter max: 1100 mm Cgsbsdnznksvdlcvst Internal breakdowns min: 300 mm Turning length max. 520 mm Spindle speeds: gear-unit stage 1: 0-110 RPM Gear-unit stage 2: 110-300 RPM Power of main motor screw: 55-70KW Complete machines documentaries available.

Condition: repair required (used), Year of construction: 2003, operating hours: 34,343 h, Functionality: limited functionality, machine/vehicle number: 938378, turning length: 580 mm, turning diameter over cross slide: 210 mm, turning diameter: 210 mm, spindle motor power: 7,500 W, spindle speed (max.): 4,000 rpm, spindle bore: 51 mm, travel distance X-axis: 185 mm, travel distance Z-axis: 455 mm, bar diameter: 51 mm, The device is mechanically in good condition. All components are working. The problem with the turret - controls tools but does not lock them. All other functions work fine. Cgebjulvtuevdlcvst

Condition: used, turning diameter: 560 mm, center width: 2,000 mm, spindle speed (max.): 1,800 rpm, bed width: 432 mm, overall weight: 4,000 kg, three-jaw chuck diameter: 315 mm, Used universal lathe FAT Poland Model: TUR 560 x 2000 three-jaw chuck' Digital readout 2 axes Multifix Cgebsuqw Nbjvdlcvet center

Condition: excellent (used), Year of construction: 1983, Functionality: fully functional, Weiler Center Lathe Model Condor 81 Lead and Feed Lathe with 3-Axis Digital Readout from K&C NEW Technical Specifications: >> Year of Manufacture 1983 Machine No. 83-067 Csbvdlcowb Supsvogt >> Center height 165 mm >> Center width 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feed rates from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be switched on >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating instructions Functions: mm/inch switching, ABS/INC coordinate selection, halving of the display value, reference mark, 200 tool programming, cone calculation, radius/diameter, quick zeroing, counting direction switching >> 1 new three-jaw chuck, 160 mm, 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm, 1 mm increments >> Multifix size B with 3 tool holders >> Electronic spindle protection >> Rear panel >> Coolant system >> Machine feet About the machine: Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was also performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to view and try out this machine live on-site.

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 400 mm turning dia. over face-slide: 400 mm turning length: 1155 mm max. turning diameter: Ø 350 mm travel -x axis: 205 mm travel -z axis: 620 mm control: Fanuc OI-TC max. tool weight: 235 (with Tailstock) kg spindle passage: Ø 80 mm revolution per minute: steples U/min rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret - number of stations: 12 tailstock taper ISO: MK 4 mm tailstock quill stroke: 150 mm total power requirement: 45 kVA Weight approx.: 4,0 t dimension machine xH: 2,6 x 1,8 x 2,2 + Transformator m Equipment: -3-jaw chuck Ø 260mm with interchangeable jaws inside/outside -center point in tailstock -disk turret Ø 480mm -Hydraulic unit (40 liter capacity) -Coolant tray (80kg) Cgsbsv Iplasvdlcvst -LOSMA exhaust air filter -Chip tray (30kg) -Chip conveyor (180kg) Operation via control panel and foot switch Accessories various bar sleeves Ø 78mm (outside) various clamping rods 1x 4-jaw lathe chuck Ø 200mm TOS various clamping jaws various clamping fixtures *

Condition: used, Year of construction: 2005, turning diameter 640 mm turning length 1.185 mm control SINUMERIK 840D swing diameter 640 mm distance of spindle heads 1500 mm slide I: X1 / Y1 / Z1 / B slide travel X-axis 550 mm slide travel Z-axis 180 mm Z- Travel 1.185 mm B - axis 240 ° feed x-axis 0 - 40.000 mm/min feed y- axis 1 - 24.000 mm/min Feed z- axis 1 - 70.000 mm/min feed B-axis 1 - 20 1/min rapid traverse X/Y/Z 40 / 24 / 70 m/min feed capacity X/Y/Z S6: 7,00/11,00/7,50 kN tool taper HSK 63 turning speed milling-spindle 10 - 12.000 1/min power capacity at 100 % load 13,20 kW power capacity at 40 % load 22,00 kW torque milling spindle 60 / 100 Nm no. of workpieces in the magazine 46 Stück tool length - max. 350 / 200 mm tool diameter 80 mm wotkpiece diameter with 2 vacant positions 120 mm weight of tools max. 6 / 10 kg slide II: X2 / Z2 slide travel X-axis 180 mm Z- Travel 1.050 mm feed x-axis 1 - 24.000 mm/min Feed z- axis 1 - 36.000 mm/min rapid traverse x + z axis 24 / 36 m/min feeding force S6: 11,00/9,00 kN turret (x-stations) 12 tool taper DIN 69880 Ø40 Driven tools - quantity 12 Driven tool turning speed 1 - 4.000 1/min power capacity at 100 % load 10,70 kW torque S1: 32 Nm Slide III - longitudial travel Z3 mm Z- Travel 1.150 mm Feed z- axis 1 - 36.000 mm/min rapid traverse Z-axis 36,00 m/min feed capacity Z - axes S6: 13,00 Nm Csbvdlcov Irgyevsgt Main spindle ISM90 turning speed main-spindle 10 - 4.000 1/min power capacity at 100 % load 36,00 kW power capacity at 40 % load 45,00 kW max. torque at 40% / 100% load 800 / 630 Nm spindle bore 80 mm turning speed opposed-spindle 10 - 5.000 1/min power capacity at 100 % load 21,00 kW power capacity at 40 % load 28,00 KW max. torque at 40% / 100% load 320 / 240 Nm spindle bore 80 mm total power requirement 70,00 kW weight of the machine ca. 20,00 t dimensions of the machine ca. 8,50 x 4,50 x H3,10 m Machine with SIEMENS SINUMERIK 840D control, main- and counter-spindle, chip conveyor, dust exhauster, DMG-automation WH10top. Main-spindle ISM90: hollow clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter-spindle ISM76: closed center clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-up device with integrated conveyor belt, automatic protective cover, differential pressure clamps. Incl. pump-frame for coolant - Pump 1: 17 l/min at 80bar - Pump 2: 20 l/min at 8bar - Pump 3: 40 l/min at 20bar Without coolant unit. Was connected to a central coolant-system. Accessories: Hainbuch collet chuck incl. collets Ø30,45,50,55,60,65,72,82,85,90 1 piece workpiece pick-up-gripper for turret

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Cebvdlcevi Hryjvsgt Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Condition: excellent (used), Year of construction: 1992, Gildemeister GM20/6 Multi-Spindle Screw Machine Mfd. 1992 6 Spindles Capacity: 25mm Chip Conveyor Stock Reel and Stand Pickoff Threading Polygon attachment Frontal Milling Part ejection Cjbvdjwa D T Iolcvogt Bar feed IEMCA PRA 40/42/P

Condition: like new (used), Year of construction: 2015, spindle bore: 105 mm, turning diameter: 710 mm, center height: 355 mm, turning length: 1,500 mm, Turning diameter in gap: 960 mm, SN 710S x 1500 Year of manufacture 2015 4 jaw faceplate Acu Rite digital display Coolant tank Cebvovq Ibxjdlcvsgt Longitudinal stop Chip guard at the rear Chuck guard

Condition: excellent (used), Year of construction: 1990, Model: 40N Cgsbvdlcjwb Hc Ievet Year: 1990 Control: Mazatrol T32-2 Swing over Bed: 540mm Distance Between Centres: 1500mm Spindle Speeds: 6 – 3000 RPM Spindle Bore: 81mm dia. Machine with: 15 station Indexing Turret Hydraulic SMW Steady 3 – jaw power chuck (15” dia.) Tool Pre Setter

Condition: used, Year of construction: 2012, turning diameter 400 mm swing diameter 420 mm x-travel 850 mm z-travel 315 mm spindle head DIN 55026 - Size 11 spindle bearing diameter 140 mm turning speeds max. 4000 U/min tool turret 12 times C5 Capto rapid traverse x + z axis 45 / 30 m/min feeding force 11 kN total power requirement 58 kW weight of the machine ca. 9 t dimensions of the machine ca. 9,5 x 4,5 x 3 m Hard turning Dry machining Chip conveyor Cobvjvxwx Aodlcvogt Promot Portal and Cellmaster No clamping device available No tools available no Cellmaster accessories available

Condition: good (used), Year of construction: 1986, Sliding headstock automatic lathe STAR Type: JNC-16 Year 1986 with Fanuc OT control . Bar capacity max: 16 mm. Further data see data sheets Machine documentation available . Cjbvdlovbb U Hecvsgt

Condition: excellent (used), Year of construction: 2016, Tornos MultiSwiss 6x16 CNC Multi-Spindle Screw Machine Mfd. 2016 Cgobvdswa D Tujlcvst 6 Spindles Diameter:16mm Fanuc Control Equipped as pictured Run time: 42,689 hrs Power on: 64,668 hrs Standard tornos bar feed (5ft) 6 Motorspindles 5,5 kW max. speed 8’000 RPM Spindle capacity 14 mm, Z 50mm stroke (max. parts 40mm). 6 slides X 40mm stroke 1 counter-operation slide, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8’000 RPM, 150mm stroke. Numeric control Fanuc 30i Integrated PC with screen 17” Programming system TB DECO (DCS version) (requires 3001) contact us for more details

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, Fixed setting vice with roller quills for SUI 80 TRENCIN Capacity : 210 - 370 mm 365 - 520 mm Cgjbvdlcju Tvdbsvst Only available as a set

Condition: used, Year of construction: 1996, turning diameter over bed 710 mm turning dia. over face-slide 420 mm turning length 2000 mm control Manual Plus 3110 Heidenhain spindle bore 92 mm main spindle speeds: 16 - 1800 U/min cross movement 385 mm spindle head DIN 55027 - Size 11 spindle diameter in front bearing 140 mm power capacity at 100 % load 22,00 kW 2750 Nm feed x/z-axis 1 - 5000 mm/min rapid traverse X-axis 6,00 m/min rapid traverse Z-axis 8,00 m/min tailstock quill taper MT 5 quill stroke 210 mm diameter of quill 110 mm total power requirement 40,00 kW weight of the machine ca. 5,60 t Cgebvdlovxwlvjcvot dimensions of the machine ca. 5,00 x 3,00 x H2,50 m

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Servo driven gantry receiver Cgjbvdeq Npqmelcvst Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control 20 Bar High pressure and 8 Bar Low pressure coolant pumps Knoll chip conveyor FMB Turbo 5-55 magazine bar feeder (new in 2010) 2) Single stick turning tool holders 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder 4) Radial live ER Collet tool holders 1) Radial live End Mill tool holder 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Condition: used, Year of construction: 1999, turning diameter 570 mm turning length 2340 mm control SIN 840 D turning diameter over slide rest 345 mm spindle head DIN 55027 - Size 8 spindle bore 62 mm tailstock quill taper MT 5 spindle turning speed range 3 - 2.500 U/min total power requirement 35 kW weight of the machine ca. 5,60 t dimensions of the machine ca. 4,85 x 2,10 x 2,00 m extended machine bed steady rest Cgsbvdlevxwmajcvet chip tray coolant device 4-jaw chuck

Condition: used, Year of construction: 2009, turning diameter 320 mm turning height 180 mm Control SIEMENS 840 D chucking diameter 315 mm 0 4 U/min 1 mm rapid power traverse in X-and Z direction 60/30 m/min tool turret with 12 work positions VDI 50 total power requirement 65 kW weight of the machine ca. 13,5 t Cgsbvdlcovxwk Sevot dimensions of the machine ca. 5,5 x 3,2 x 3,3 m