Condition: used, Year of construction: 1970, Technical details: turning diameter over bed: 325 mm turning diameter over support: 150 mm turning length: 1000 mm turning length: plan: 165 / quer: 160 mm center height over bed: 200 mm length of gap: keine Kröpfung mm range of revolution per miute: 48 - 1.500 / 10 step U/min spindle bore of work spindle: 40 mm feeds:: längs: 0,021...2,34 / quer: 0,09...1,6 mm tailstock quill taper MT: 4 tailstock quill adjustment:: 125 mm total power requirement: 2,2 kW weight of the machine ca.: 1,0 t dimension machine xH: 2,1 x 0,7 x 1,2 m Threading possible: Metric, Withwort and modular thread Equipment: - 3-jaw chuck Ø 200mm with internal clamping jaws Doln Uwsu Ixydsk Nekl - Multifix quick-change steel holder - Foot brake - Cooling water pump (exclusive feed) *

Year of construction: 2009, Condition: ready for operation (used), Spindle clearance: 65mm/42mm, tool positions: 3x10, speed: 5000rpm, travel X/Z: 650mm/175mm, travel Y: +/-40mm, machine dimensions X/Y/Z: approx. 4750mm/2400mm/2700mm, weight: approx. 10000kg, operating hours: 76164h, including Knoll KTS 25-38-T coolant system, Resy KBF 452 compact belt filter and FMB turbo 5-55/4200 bar feeder, documentation available. On-site inspection is possible. Expected to be available from Q4 2025. Dkoljwg E A Rjn Uwk Nsl

Condition: excellent (used), I am selling a Weiler Primus, which is in very good condition. It has been used very rarely over the past few years and exclusively for plastic machining. The machine is equipped with a digital measuring system on 3 axes and is fully functional. Deln Uowg Exxswk Njkl No VAT will be added to the sale price.

Condition: used, Year of construction: 2011, operating hours: 6,000 h, machine/vehicle number: 650000010BE, With C-axis and driven tools MAPPS4/MSX-853 IV control system Dkolswg D Thsn Uwk Nsl

Condition: used, 1 center lathe, ZMM Sliven type CU 630, center width approx. 3,000 mm, center height approx. 400 mm, 2-axis digital display from Anilam Wizard Dksln Uwkjwg D Eqj Njl

Condition: good (used), 5/8" six-spindle multi-spindle lathe. Pietro Cucchi integral bar loader. Pneumatically driven pickup and threader in pos. 5. Dkslnjv H D Uas Uwk Nsl Chip extractor and coolant pump. Complete set of radial and face tool holders included. Good mechanical and electrical condition. Fully operational.

Condition: ready for operation (used), Year of construction: 1996, fanuc 18T 2 chucks weight 4500KGS Dkoln Usvt S Hwjwk Nol

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements width 3000 mm Measurements depth 1650 mm Measurements height 2090 mm Machine weight 6400 kg Control Unit Dkoln Uwkewfim Do Nsl Brand MAZATROL Model Mazatrol 640T Main Drive Number of spindles 2 Spindle speed range 6000 Number of axis 3 Movement X-Axis Movement 200 mm Z-Axis Movement 365/420 mm Turret Number of turrets 2 Tools Slots in storage 12 Additional Equipment Mazak Flex GL-50F portal robot (2001) Tool holders incl. driven holders Tool holders - · External holder: 7x · Internal holder: 9x · Front holder: 4x · Horizontally driven: 10x · Vertically driven: 3x This MAZAK Multiplex 6100 + robot FLEX-GL50F Lathe was manufactured in the year 2001 in Japan. It is equipped with a Mazak Mazatrol 640T control unit and has 3 axis. The machine has a spindle speed of 6000 rpm, is in good condition and well maintained. Application Types Turning

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, machine/vehicle number: W490X1.5, Lathe Make: Löw Type: W490x1.5 Turning diameter above bed: 520 mm. Turning diameter above cross slide: 260 mm. Centre height: 260 mm Turning length: 1800 mm Dkjlowg Apzen Uwk Nsl Speeds: 11 - 2240 rpm Spindle passage: 65 mm Thread - metric pitch: 0.05 - 112 mm Thread - inch: 1/4 - 56 inch Number of speed steps: 24 Total power requirement: 1.1 kW Machine weight approx.: 2.5 tons Machine dimensions approx.: 3.20 x 1.35 x 1.80 m

Condition: ready for operation (used), controller model: Siemens Sinumerik 810D, total length: 3,650 mm, total width: 1,738 mm, total height: 1,900 mm, net weight: 5,250 kg, swing diameter over cross slide: 750 mm, C-as lineaire meting in X-as 12 grondstoffen - VDI - max 4000 tpm Inclusief spaantransportband RS232 Swing over bed: 630 mm Dkslnov Sfq He Uwk Nol Max longitudinal travel Z-axis: 500 mm Max cross travel X-axis: 320 mm Spindle cone: A2-8 Dia of spindle bore: 92 mm Power on the spindle: 18,5/22 kW Number of speeds: 2 > 3000 rpm Total power needed: 52 kVa Chuck: Rohm dia 254 mm Toolchanger: yes, Sauter Number of tools: 12 driven positions

Condition: used, Year of construction: 1978, HEIDENREICH & HARBECK Hanseat 640 Lathe (Equi 62214) Machine Data Dkelewfifgsn Uwk Njl Manufacturer: Heidenreich & Harbeck Model: Hanseat 640 Year of Manufacture: 1978 Centre Width: 3 m Crane for loading operations available Material No.: 10342404 Note: This is a starting price. The sale will be conducted via an online auction against the highest bid (plus buyer's premium and VAT). Please follow the link for further information and photos of this lot.

Condition: new, Center length ----- 700 mm Center height ----- 140 mm Spindle diameter ----- 280 mm Main spindle passage ----- 38 mm Bed width ----- 180 mm Spindle speed ----- variable 50-1800 rpm Frequency motor ----- 1.5 kW Including Dkjln Uwoga Tv Tok Nel * DELTA frequency switch OPTIONS * Support box * SINO 2-axis digital readout * Multifix quick-change chisel holder incl. 4 tappets TOOA1 * Fixed glasses * Meshing glasses * Chuck plate * 4 Chuck 160 mm

Year of construction: 2022, Condition: like new (used), machine/vehicle number: 3123432 & 3123758, For sale is a Haas ST20 Y and a Haas ST30 Y, each with an automatic Haas bar feeder. Both machines have a counter spindle and an automatic chip conveyor. Both machines have a 24-tool turret. Dolnowg Adfj Uwk Nekl Live tools. A large collection of tools, measuring instruments, etc. is included. The total new value of the tools is approximately €50,000. These machines were newly manufactured for a customer at Haas at the end of 2022 and delivered from the USA in 2023. Unfortunately, the customer suddenly backed out, and now both machines with the bar feeders have only been set up and tested by the technicians. The test run was flawless. All invoices for the tools, etc., are available. Viewings possible at any time. Located near Stuttgart Airport. Please contact us if you are interested.

Year of construction: 2004, Condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D Powerline Media Chip conveyor Yes Dolswfilmon Uwk Nokl Additional Equipment Belt filter system: Coolant tank 980L with 20/40 bar This DMG Gildemeister Twin 65 horizontal turning machine was manufactured in 2004. It features a Siemens 840D Powerline control, a bar passage of 65mm, and dual sauter revolvers, each with 12x VDI 30. Additional highlights include a parts pick-up device, a belt filter system with a 980L coolant tank, and an IRCO Profimat 65 bar loading magazine. If you are looking to get high-quality turning capabilities, consider the DMG Gildemeister Twin 65 machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 1980, Weiler Condor VS2 lathe with 3-axis Heidenhain digital display, built in 1980, four-jaw chuck, Multifix with 3 holders. Machine in very good, operational condition, comes from a training workshop. Ready to demonstrate with power on by arrangement. Dkjlsvx Sw Hjn Uwk Nsl

Condition: used, Year of construction: 2013, turning diameter 340 mm swing diameter 420 mm turning height 315 mm Control S 840 DSL x-travel 850 mm z-travel 315 mm spindle turning speed - stepless 0- 3400 U/min main drive 37(48) kW feed in x - axis 0- 45 m/min Dkjln Uswfhq Ijwk Nsl feed range Z-direction 0- 30 m/min work piece power 19 kW toolpiece turning speed range 0- 6000 U/min total power requirement 60 kW weight of the machine ca. 12 t dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Machine is offered without chuck and tool holders.

Condition: used, Year of construction: 1978, HEIDENREICH & HARBECK Hanseat 640 Lathe (Equi 62214) Machine Data Manufacturer: Heidenreich & Harbeck Model: Hanseat 640 Year of Manufacture: 1978 Centre Width: 2 m Crane for loading operations available Material No.: 10342422 Note: This is a starting price. The sale will be conducted via an online auction against the highest bid (plus buyer's premium and VAT). Please follow the link for further information and photos of this lot. Dkjlewfifaon Uwk Nel

Condition: new, Center length ----- 1000 mm Center height ----- 180 mm Spindle diameter ----- 360 mm Main spindle passage ----- 52 mm Bed width ----- 187 mm Spindle speed ----- 90-2000 rpm Motor ----- 1.5 KW INCLUDED Dkelega Tz Hen Uwk Njl * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOE5 with 4 barrels * Electric brake * 3-D chuck 200 mm * 4 Chuck 200 mm * Clamping plate 250 mm * LED lighting and cooling system * Fixed and moving glasses * Box with various tools

Condition: used, Year of construction: 2002, Functionality: fully functional, turning diameter over cross slide: 540 mm, spindle bore: 90 mm, turning length: 3,000 mm, turning diameter: 830 mm, turning diameter over bed slide: 540 mm, quill stroke: 120 mm, Cycle Lathe Manufacturer: Monforts Type: KNC8S Year of Manufacture: 2002 Turning Diameter over Bed: 830 mm Turning Diameter over Support: 540 mm Turning Length: 3000 mm Tailstock: MK6 Quill, Stroke: 200 mm Chip Conveyor, Multifix Tool Post, Size D 4 Gears: 1. 1 - 225 rpm 2. 5 - 560 rpm 3. 7 - 900 rpm 4. 18 - 1600 rpm Accessories: Djljwfhh Hjn Uwk Nekl 4 Tool Post Holders 2 Steady Rests Faceplate: 700 mm 3-Jaw Key Bar Chuck The machine is in used condition and is fully functional.

Condition: ready for operation (used), Year of construction: 2016, Control Unit Model Matrix NeXUS 2 Brand MAZATROL Main Drive Djln Uwewfiltjk Nskl Spindle speed range 12000 Number of axis 6 Movement X-Axis Movement 450 mm Y-Axis Movement 200 mm Z-Axis Movement 1119 mm W-Axis Movement 1436 mm B-Axis Movement -30° to 220° Tools Slots in storage 20 Max weight 5 kg Max tool diameter 125 mm Max tool length 210mm Additional Equipment Tool magazine for 36 Capto tools (no tool holders included) Preparation for bar feed Automatic parts catcher (D:65 X L: 120 X2.5Kg) incl. ejector High pressure cooling 15 bar incl. simultaneous flood cooling 5 bar Preparation for chip conveyor Ejection side Preparation for Mazak Monitoring System B OMP60 (optical) This MAZAK INTEGREX J-200 S Lathe was manufactured in the year 2016 in Japan. It is equipped with a Mazatrol Matrix Nexus 2 control unit and has 6 axis. The machine has a spindle speed of 12000 rpm. See original purchase confirmation for more technical details as PDF (German) attached. Application Types Turning

Condition: good (used), Lot of toolholders and other equipement. Dslewfg Dtjn Uwk Njkl

Condition: used, Year of construction: 2012, turning diameter 340 mm swing diameter 420 mm turning height 315 mm Control S 840 DSL Doln Uswfhqzowk Nekl x-travel 850 mm z-travel 315 mm spindle turning speed - stepless 0- 3400 U/min main drive 37(48) kW feed in x - axis 0- 45 m/min feed range Z-direction 0- 30 m/min work piece power 19 kW toolpiece turning speed range 0- 6000 U/min total power requirement 60 kW weight of the machine ca. 12 t dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Machine is offered without chuck and tool holders.

Condition: excellent (used), Year of construction: 1992, Functionality: fully functional, Controller LUXTRONIC (ISO programming) Z travel 400 mm Max turning dia 210 mm Spindle power 1,1 kW Spindle bore d26 mm Spindle speed range 25 - 2000 rpm No of turret positions 8 Djljwfgmhon Uwk Nskl Full power required 1,5 kW Dimensions L x W x H = 1700 x 700 x 1500 mm Weight 500 kgs Accessories - G codes: G01, G02/G03, G04, G33, G40/G43, G74, G81/G82, G84, G85, G86, G90, G91, G92, G94/G95, G96 - 3 jaws chuck D120 mm - Collet chuck with spare collets - Automatic turret - Low voltage working light - Tool holders (also for drills) - Manual in PDF (on german language) The lathe can be found in our showroom and is under power. It can be inspected after making an appointment.

Condition: new, Center length ----- 1000 mm Center height ----- 205 mm Turning diameter ----- 410 mm Main spindle passage ----- 52 mm Bed width ----- 250 mm Spindle speed ----- 45-1800 rpm Motor ----- 3.3 KW Dsloga T D Ejn Uwk Nskl INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOE5 with 4 barrels * 3 Chuck 200 mm * 4 Chuck 250 mm * Clamping plate 350 mm * Fixed and moving glasses * LED working light and cooling system * Electric brake CE * Box with various tools

Condition: ready for operation (used), Year of construction: 2022, Main Drive Number of spindles 1 Spindle speed range 4000 rpm Spindle motor power 35 kW Number of axis 9 Additional Equipment Machine language: German / Machine manuals available for download in pdf format / G codes type A in Fanuc control / LPS for left spindle Reduction tube for left spindle / 3 jaw power chuck SMW-Autoblock BB-D 210 Ø66 for left spindle with one set of soft jaws / Collet chuck Hainbuch AXFIX 65 (mini) 10794/0003 for left spindle Changing device Hainbuch diam. 65 / LPS system in right spindle / Tailstock on the right spindle (long version) for moving tailstock center CM 3 (not included in the option) / clamping pressure for right spindle; selectable via M function 3 jaw power chuck SMW-Autoblok BBD 175 Ø56 for right spindle with one set of soft jaws / Collet chuck Hainbuch AXFIX 65 (mini) 10794/0003 for right-hand spindle / Tool presetter (tool presetter) / Lateral chip conveyor (standard version) Coolant system consisting of two coolant pumps up to 70 bar, one for each turret, independently adjustable to 70-60-50-40-30-10 bar, mounted on an additional tank of 330 liters, as well as a filter system of 10µm. Coolant washing nozzle / Machine status light / Tool life monitoring (tool life management) / Tool load monitoring Programmable, automatic parts catcher (pneumatic) / The workpiece remover is equipped with a collecting tray that opens and closes pneumatically to remove the workpiece. Coolant supply through right-hand spindle Doln Uwswfih Ujk Nokl Optional: Cucchi Giovanni Typ DB EVO70 loader This 3-axis CMZ TTL-66-66-T1Y-T2Y lathe was manufactured in 2022. It features a maximum rod diameter of 66mm, turning diameter up to 220mm, and main spindle power of 35Kw. The machine includes a 70 bar high-pressure system with a filter system and an additional tank. A second identical machine is also available from 2022. For more information about this lathe, please reach out to us. Application Types Turning