Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 158231, turning length: 300 mm, turning diameter: 400 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 420 mm, travel distance Z-axis: 180 mm, controller model: Siemens Sinumerik 808D, TECHNICAL DETAILS Max. turning diameter over bed: Ø 400 mm Max. turning diameter over support: Ø 280 mm Max. workpiece length (center distance): 300 mm Control: Siemens Sinumerik 808D Travel paths X-axis travel: 180 mm Z-axis travel: 420 mm Rapid traverse (X & Z axis): 6,000 mm/min Spindle Spindle speed range: 250 – 3,000 rpm Spindle mount: A2-5 Spindle bore: 42 mm Drive Main drive motor power: 7.5 kW Tailstock Tailstock: hydraulic Max. tailstock quill stroke: 80 mm Tailstock taper: MT4 MACHINE DETAILS Dimensions (without Chip conveyor): 2,470 x 1,370 x 1,880 mm Total weight: approx. 4,500 kg EQUIPMENT - Heavy-duty design Dcolowhqnnoqxmuweg - Inclined bed design (also suitable for crane parts) - Chip conveyor (also suitable for stainless steel chips) - Hydraulic collets - Hydraulic jaw chuck

Year of construction: 2012, Condition: ready for operation (used), General Data Measurements width 1000 mm Measurements depth 1700 mm Measurements height 870 mm Machine weight 11974 kg Control Unit Brand MAZATROL Main Drive Number of spindles 2 Spindle speed range 4000 RPM Spindle motor power 30 HP Spindle bore 87,884 mm Number of axis 3 Movement X-Axis Movement 309.88 X-Axis Rapid Traverse 945 IPM Y-Axis Movement 76.2 mm Z-Axis Movement 605.028 mm Z-Axis Rapid Traverse 945 IPM Turret Number of turrets 2 Rotating tools Yes Tools Number of station 12 Additional Equipment Max Cutting Length (Chucker): 225 mm Max Distance Between Spindle Faces: 1450 mm Min Distance Between Spindle Faces: 249.42mm General Data Measurements width 1000 mm Measurements depth 1700 mm Measurements height 870 mm Machine weight 11974 kg Djlqxewfurlomuwscg Control Unit Brand MAZATROL Main Drive Number of spindles 2 Spindle speed range 4000 RPM Spindle motor power 30 HP Spindle bore 87,884 mm Number of axis 3 Movement X-Axis Movement 309.88 X-Axis Rapid Traverse 945 IPM Y-Axis Movement 76.2 mm Z-Axis Movement 605.028 mm Z-Axis Rapid Traverse 945 IPM Turret Number of turrets 2 Rotating tools Yes Tools Number of station 12 Additional Equipment Max Cutting Length (Chucker): 225 mm Max Distance Between Spindle Faces: 1450 mm Min Distance Between Spindle Faces: 249.42mm This 3-axis Mazak Multiplex 6300-II Y was manufactured in 2012, offering robust capabilities for horizontal turning. Ideal for precision machining, this used machine maintains a solid performance record. Consider the opportunity to buy this Mazak Multiplex 6300-II Y horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 1996, Condition: ready for operation (used), A CNC lathe from Mazak's Super Quick Turn series is available. Travel X/Y/Z: 180mm/100mm/620mm, spindle speed: 3000rpm, tool holder: VDI40, tool positions: 12, axes: 5, machine dimensions X/Y: approx. 3200mm/1800mm, weight: approx. 6000kg, control: Mazatrol T Plus. Documentation available. On-site inspection is possible. Presumably there is a card error, as the machine runs irregularly. Dslqxewhp Iyomuwecg

Condition: excellent (used), Year of construction: 2018, operating hours: 50,382 h, Functionality: fully functional, machine/vehicle number: L220EA/1413, spindle speed (max.): 10,000 rpm, overall weight: 2,400 kg, bar diameter: 25 mm, power: 3.7 kW (5.03 HP), All technical data can be found on Citizen's website for L20E-2M10 - Purchased new in 2018 and installed by Citizen. Dcolqxmuowhpzgswog - Regular maintenance carried out in house. - Auto feeder Boss 338-HD Superfast for 3m bar length feed up to Ø25mm - Cool Blaster Mist Control to recycle coolant mist. Recently had filters replaced. - CM10-1000-4B High Pressure Coolant Unit For any more information please do not hesitate to contact.

Condition: used, _____ Description: Year of manuf. : 2023 Control : Siemens SINUMERIK 828D Turning diam. : 560 mm Turning length : 1000 mm Mainspindle: Technology:belt-driven spindle Delqxswgg T Remuwscg Speed (max.):4500 rpm Power (max.):15 kW Bar capacity:65 mm Workpiece clamping:3-jaw chuck; Autogrip 3H-210 Tool carrier (X/Z): Technology:Turret with 12 stations (BMT-interface) Tool holder:BMT-interface Traverse path X / Z:200 / 1050 mm Rapid traverse X / Z:30 / 30 m/min Tailstock: Technology:programmable Travel:900mm Cone:MK5 Equipment/Accessory: Chip management:chip conveyor with chip bucket Coolant management:high-performance coolant system with coolant pump Raw material feed:bar feeder interface Set-up mode:electronic handwheel Lubrication management:automatic central lubrication Other equipment:work light; flushing gun

Condition: used, Star SR-20 Type 530G Sliding Head CNC Lathe with Fanuc 16T Control, 5 Axis, Twin Spindle, 6 Turning Tool Bays, 3 End Collet Bays, 3 Side Collet Bays, 3 End Boring Bays, Serial No. 010804, FMB Turbo 3 - 26 Bar Feed, Max Bar Length 3800mm Country of Origin: Japan Dcslqxmuewhpaijwjg Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: new, Traub Rollers for Stamag Bar Loaders DN60, DN61, DNH61, 707451, 10561157 (1) Item No.: 707451 (2) Item No.: 10561157 Condition: New Rollers for Stamag DN60, DN61, DNH61, 707451, 10561157 Price per piece. Dcolqxmuowhn I Sjwog Inner diameter: 17mm Outer diameter: 120mm Thickness: 35mm Traub rollers for Stamag bar loaders DN42, DNH42, 715078, 10828092 VST (1) Item no.: 715078 (2) Item no.: 10828092 Condition: New Rollers for Stamag DN42, DNH42, 715078, 10828092 Price per piece. Inner diameter: 15mm Outer diameter: 85mm Thickness: 23mm Traub rollers for Stamag bar loader DN26 DN30 DNH32 606990 687385 (1) Item no.: 606990 (2) Item no.: 10837472 Condition: New Rollers for Stamag DN26, DN32, DNH30, 606990, 10837472, 687385 Price per piece. Inner diameter: 10mm Outer diameter: 60mm Thickness: 15mm

Year of construction: 2009, Condition: ready for operation (used), General Data Measurements width 1879,6 mm Measurements depth 2743.2 mm Measurements height 1905 mm Machine weight 11000 kg Control Unit Brand MAZATROL Main Drive Spindle speed range 4000 RPM Spindle motor power 35 HP Spindle bore 76.2 mm Number of axis 2 Movement X-Axis Movement 177,8 mm Z-Axis Movement 558,8 mm Workpiece Workpiece drm over bed 6731 mm Turret Number of turrets 1 Dcolqxmuowfuqzewjg Tools Number of station 12 This Mazak QTN 250-II was manufactured in 2009. A robust horizontal turning machine, it offers reliable performance for precision machining. Ideal for those looking to enhance their machining capabilities with a proven model. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, turning diameter: 410 mm, spindle bore: 91 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 255 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 670 mm, bar diameter: 80 mm, CNC Fanuc 18i - T WORKING RANGE Max. workable bar diameter: mm 80 Max. diam. workable from recovery: mm 410 Max. workable length: mm 670 Max. rotating diameter: mm 600 MAIN SPINDLE Max. rotation speed: rpm 3,500 Spindle nose: ASA 8 “ Spindle hole: mm 91 Internal diameter of bearings: mm 140 Motor power: kW 22 Motor torque: Nm 539 TAILSTOCK Tailstock cone: CM 5 with CM4 reduction Automatic positioning of B-axis: mm 660 B-axis rapid: m/min 15 TURRET Number of positions: N° 12 Tool stem for external/internal: mm 20 x 20 – 25 x 25 – Ø32-40-50 Rotation time (1 pos): sec 0.15 DRIVE TOOLS Number of positions: N° 12 Max rotation speed: 4,000 rpm Motor power: 3.7 kW Motor torque: 70 Nm C AXIS Minimum programmable value: ° 0.001 Max. rapid speed: 100 rpm AXES X-axis stroke: 255 mm Z-axis stroke: 670 mm Y-axis stroke: 110 mm (+ 60 / – 50) X-axis rapid: 20 m/min Z-axis rapid: 24 m/min Y-axis rapid: 7.5 m/min Doljwhm Rroqxmuwocg COOLANT Tank capacity: 250 l Pump flow rate: 120 l/min Pump motor power: 0.75 Kw DIMENSIONS – WEIGHT Overall dimensions with chip conveyor: 4.450 x 1.900 x 2.100 mm h Height of spindle center: mm 1.600 Weight with chip conveyor: Kg 6.300 Machine equipment: • Self-centering hydro-divider Autoblock type AXN 315 mm • Various motorized tool holders (radial and axial) • Use and maintenance manuals and CE declaration of conformity Year of construction: 2013

Condition: good (used), Year of construction: 2014, operating hours: 17,300 h, Functionality: fully functional, turning length: 200 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, spindle bore: 26 mm, TECHNICAL DETAILS Control: Mitsubishi Main and counter spindle diameter: 20 mm Spindle bore: 26 mm Maximum machining length for long turning: 200 mm Maximum machining length for short turning: 50 mm Main spindle speed: 10,000 rpm Counter spindle speed: 8,000 rpm Rear side machining Rear block: with Y-axis Stations for rear side machining: 8 units Dcelqewhmrcsxmuwjg Deep hole drilling stations on counter spindle: 6 units MACHINE DETAILS Operating hours: approx. 17,300 h Bar loading magazine: FMB Turbo 2-20 EQUIPMENT - Conversion kit D20 - Müller CL3 high pressure system with 8-way switchable valves, 130 bar, and automatic backwash filter - Automatic fire extinguishing system Kraft + Bauer included Fire damper - Angle-adjustable driven holder 3-way

Condition: ready for operation (used), Year of construction: 2006, Available immediately from location: CNC lathe Doosan Type Lynx 220 A Year of manufacture 2006 Maximum turning diameter 290 mm Turning length 332 mm X-axis 145 mm Z-axis 332 mm Spindle bore 45 mm Spindle speeds up to 6000 rpm Spindle drive 15 kW 24-station tool turret Dcelowhkznoqxmuwjg Fanuc CNC control Chip conveyor Weight 3 tons Price: €9,500 plus VAT, ex location

Condition: used, Year of construction: 2007, Star SR-20RIII Type 680 Sliding Head CNC Lathe with Fanuc 300iS Control, 5 Axis, Twin Spindle, 14 Turning Tool Bays, 4 End Collet Bays, 4 End Collet Bays, 5 Side Collet Bays, Nobec Fire Suppression System. S/No. 0119 (008) (2007) Run Time - 14998H42M95, FMB Turbo 3 - 36 Barfeed, 3200mm Max Work Piece Length. S/No. 41-260-479/R 565589. Star G42000 High Pressure Coolant System. S/No. 222 (2007) Country of Origin: Japan Dslswhn Uxoqxmuwjcg Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: new, Traub Telescopic Cover, Telescopic Sheet, 945334 TNC42 TNC65 (1) Item No.: 945334 (2) Item No.: 10732161 Condition: New Traub Telescopic Cover, Telescopic Sheet, 945334 TNC42 TNC65 Dolowhn H Uoqxmuwscg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,547 h, Main Drive Spindle speed range 4000 Tool taper HSK-63 Number of axis 7 Movement X-Axis Movement 615 mm Y-Axis Movement 250 mm Z-Axis Movement 1585 mm V-Axis Movement 230 mm W-Axis Movement 1539 mm 1-AXIS Movement 30-210 Tools Slots in storage 72 Media Chip conveyor Yes Dslqxmuswgf Akowecg Additional Equipment Mist filter unit High pressure cooling (14 bar) Work space rinse cleaning (2.7 bar/60 l) RMP600-Radio/Radio probe Preparation for 70 bar cooling through spindle Programmable overload detector C-axis on second spindle MO321 - Gear milling without tool TE810 - Preparation for Multi and Flash tools NO117 - Tool edge control for 5-axis continuous / Axes movements: X / Y / Z / X2 / Z2 615 / 250 / 1585 / 230 / 1388 mm / W 1539 mm / C-axis indexing 0.0001° This 7-axis Mazak Integrex i-300ST-1500U lathe was manufactured in 2012. It features a main spindle bar passage of 80mm, a tool changer with a capacity of 72 tools, and a milling spindle speed of 12,000 rpm. Additional highlights include a high-pressure cooling system at 14 bar, a chip conveyor, and a mist filter unit. Ideal for prototype production, the machine includes tooling, chucks, and jaws. For more information about this lathe, please reach out to us. Application Types Turning

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, turning length: 560 mm, turning diameter: 220 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 170 mm, travel distance Y-axis: 55 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (max.): 5,000 rpm, bar passage: 45 mm, CNC Fanuc 32i – model B WORKING RANGE Max. workable bar diameter: mm 45 Max. diam. workable from recovery: mm 220 Max. workable length: mm 560 Max. rotating diameter: mm 580 MAIN SPINDLE Max. rotation speed: rpm 5,000 Spindle nose: ASA 5 “ Spindle hole: mm 52 Internal diameter of bearings: mm 90 TAILSTOCK Tailstock cone: CM 5 with CM4 reduction Delqowhlf Uoxmuwecg B-axis rapid: m/min 15 TURRET Number of positions: No. 12 Tool stem for external/internal: mm 20 x 20 – 25 x 25 – Ø32 Rotation time (1 pos): sec 0.15 DRIVE TOOLS Number of positions: No. 12 Max. rotation speed: rpm 4,000 Motor power: kW 3.7 Motor torque: Nm 47 C AXIS Minimum programmable value: ° 0.001 Max. rapid speed: rpm 100 AXES X-axis travel: mm 170 Z-axis travel: mm 560 Y-axis travel: mm + 55 / – 50 B-axis travel: mm 490 X-axis rapid: m/min 20 Z-axis rapid: m/min 24 Y-axis rapid: m/min 6 COOLANT Tank capacity: l 250 Pump flow rate: l/min 230 Pump motor power: Kw 1.5 DIMENSIONS – WEIGHT Overall dimensions with chip conveyor: mm 4.240 x 2.000 x 2.020 h Height of spindle center: mm 1.000 Weight with chip conveyor: Kg 4.900 Equipment machine: • 3-jaw Autoblock self-centering chuck diam. 210 mm • Various motorized modules (axial + radial) • Use and maintenance manuals and CE declaration of conformity Year of construction: 2012

Condition: ready for operation (used), Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 1102-085, spindle bore: 95 mm, turning diameter over bed slide: 930 mm, turning length: 12,000 mm, total length: 13,400 mm, total width: 2,100 mm, total height: 2,100 mm, bed width: 585 mm, overall weight: 18,000 kg, URGENT TO SELL ! Accurite digital read out system 2 axis 2x Steady rest 50 - 300 mm 2x Steady rest 200 - 500 mm Djlqxmswhkuhjuwjcg Feeds all directions 4 chuck 800 mm

Condition: excellent (used), CNC machine Traub TNL 26 Condition used, in good condition Sale to the exclusion of any warranty Dcelqehlp Sdjxmuwjg

Condition: used, Year of construction: 2007, Haas TL-2CE CNC Lathe. S/No. 3080208 (2007) with Haas CNC Control, 300mm 3 Jaw Chuck, Tailstock. Country of Origin: U.S.A Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Delqxmswhn Ryeuwjcg

Condition: ready for operation (used), Year of construction: 2020, Functionality: fully functional, Hwacheon T2 CNC lathe with 2 turrets. Dolqxmowhiqzeuwecg

Year of construction: 2004, Condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model CNC Pilot 4290 Additional Equipment Sauter Revolver with driven tools This Gildemeister CTX 320 horizontal turning machine was manufactured in 2004. It is ideal for versatile machining tasks. Contact us for more information. Dolqewgf A Rjxmuwecg Application Types Turning

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, turning diameter over cross slide: 300 mm, turning length: 450 mm, turning diameter: 300 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 32 mm, travel distance Z-axis: 450 mm, spindle motor power: 20 W, rapid traverse X-axis: 60 m/min, rapid traverse Z-axis: 45 m/min, bar diameter: 51 mm, CNC Fanuc 16i WORKING AREA: Max rotation diameter: mm 500 Rotation diameter above transverse guide: mm 300 Transverse travel (X): mm 160 Y-axis travel: mm +-32 Longitudinal travel (Z): mm 450 MAIN SPINDLE (integrated electrospindle): Spindle head (flat flange): 140 H5 Bar capacity: mm 51 Front bearing diameter: mm 100 Power (40/100% ED): kW 20/16 Torque (40/100% ED): Nm 200/155 Rotation speed: rpm 20-6,000 COUNTER SPINDLE (integrated electrospindle): Spindle head (flat flange): 140 H5 Spindle bore: mm 37 Front bearing diameter: mm 75 Power (40/100% ED): kW 9/7.5 Torque (40/100% ED): Nm 57/48 Rotation speed: rpm 20-6,000 FEEDS: Z-axis rapid: m/min 45 X-axis rapid: m/min 60 TOOL TURRET: Number of motorized tool stations: 12 Power (40/100% ED): kW 10 Torque (40/100% ED): Nm 20 Rotation speed: rpm 5.000 Machine complete with: • No. 03 radial motorized modules • No. 02 universal motorized modules • No. 3 fixed tool holders • Self-centering main spindle Autoblok diam. mm 210 • Self-centering counter-spindle Autoblok diam. mm 160 • Instruction manuals and CE declaration Delqowhkm Rexmuwjcg Year of construction: 2004

Condition: new, turning length: 2,070 mm, turning diameter: 600 mm, spindle speed (max.): 1,500 rpm, spindle motor power: 18 W, total height: 1,950 mm, Equipment: rotational speed infinitely variable, The HYUNDAI Wia L5100LY has excellent rigidity through the use of a wedge-shaped Y-axis. Specialized in heavy machining through the use of a main spindle with 2-stage gear (max. torque 2,990 N·m) Dcolqxjvwizgjmuweg High rigidity through flat guides and a turning length of 2,070 mm. Powerful large BMT 75 turret.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,300 h, General Data Measurements width 2300 mm Measurements depth 5500 mm Measurements height 2400 mm Machine weight 8500 kg Control Unit Model 31i Brand FANUC Main Drive Number of spindles 3 Spindle speed range 3000 rpm / 4000 rpm Spindle motor power 30 kW / 24 kW Spindle bore 94 mm / 65 mm Tool taper HSK - 63 Number of axis 5 Dcolqxmuowgf Dbowsg Movement X-Axis Movement 510 mm X-Axis Rapid Traverse 20000 mm/min Y-Axis Movement mm Y-Axis Rapid Traverse 24000 mm/min Z-Axis Movement 1300 mm Z-Axis Rapid Traverse 12000 mm/min B-Axis Movement +/- 105° C-Axis Movement Increment 0.001°. Additional Equipment Lubrication tank with pump. Main spindle // counter spindle // milling spindle This 5-axis Biglia B1200S SMART TURN lathe was manufactured in 2014. It features a Fanuc 31i control unit, a maximum turning diameter of 750 mm, and a turning length of 1260 mm. Equipped with a tool magazine capacity of 40 posts and a milling head maximum speed of 8000 rpm. Ideal for complex machining tasks, the Biglia B1200S SMART TURN we have for sale represents a significant opportunity. For more information about this lathe, please reach out to us. Application Types Turning

Condition: ready for operation (used), Year of construction: 2002, operating hours: 55,004 h, Control Unit Brand FANUC Main Drive Number of axis 8 Media Chip conveyor Yes Additional Equipment ROBOBAR SSF automatic bar loader Dslqxmowgf Aqjuwocg Motorized tools Main spindle and sub-spindle Tool holders Collets This 8-axis Tornos-Bechler Deco 20a was manufactured in 2002. A Swiss type turning machine featuring a max turning diameter of 20mm, equipped with a Fanuc control system, motorized tools, main and sub-spindle, and a ROBOBAR SSF automatic bar loader. Includes tool holders and collets. A great opportunity to buy this Tornos-Bechler Deco 20a Swiss type turning machine. Contact us for further details regarding this Swiss type turning machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2004, General Data Machine weight 5500 Workpiece Workpiece drm 15 mm Workpiece X 300 mm This EUBAMA S8 rotary transfer machine was manufactured in 2004. It handles parts up to 15 mm in diameter and approximately 300 mm in length. It operates on a 24 V control voltage and requires a 400 V, 50 Hz electrical connection. Weighing a maximum of 5.5 tons, the EUBAMA S8 machine we have for sale is robust and reliable. Contact us for further details regarding this rotary transfer machine. Dcolswgf Awsqxmuweg Application Types Turning