Used Boehringer for sale (96)

Condition: excellent (used), Year of construction: 2004, Digital display, Heidenhain Max. turning diameter over bed: 570 mm Turning length: 1500 mm Kdodpfe Aa D Dbsx Ahbsu Max. spindle speed: 2,240 rpm Multifix size C 3-jaw chuck, diameter 250 mm Fixed steady rest, diameter 20 – 315 mm Tailstock

Condition: used, Year of construction: 1997, CNC Turning Center VDF Boehringer VDF 250 Cm (NO TAILSTOCK) General Manufacturer: VDF Boehringer Model: VDF 250 Cm Type: CNC slant bed turning center, chuck work Year: 1997 Serial no.: 1114.3705-24 Control: Siemens Sinumerik 840C Location: Korschenbroich, Germany Working area Swing over bed: 550 mm Swing over cross slide: 480 mm Max. turning length: 1,000 mm Tailstock: none (chuck work only) Main spindle Spindle nose: size 8, DIN 55026 Spindle bore: 103 mm Max. speed: 4,500 rpm C-axis: yes Axes X travel: 405 mm Z travel: 1,099 mm Rapid traverse: 10 m/min Feed range: 0.1 to 10,000 mm/min Turret 12 stations, VDI 50 (DIN 69880) Driven tools: yes, up to 2,500 rpm, 5.4 kW Driven tool torque: 25 Nm (standard), 100 Nm (low range) Clamping Hydraulic power chuck, special swivel chuck (Sonderschwenkfutter) Full hydraulic clamping cylinder Equipment Coolant system: 600 l tank, 5.5 bar, 60 l/min Kdedpez Rnrrsfx Ahbsu Chip conveyor: right-hand discharge Hydraulic unit: Hydrokraft Control cabinet: Rittal, with cooling unit Oil mist extractor: yes Pivoting operator panel Electrical 400 V, 3 phase, 50 Hz Main fuse: 125 A Operating current: 100 A Total connected load: approx. 50 kW Dimensions and weight Approx. 5,400 x 3,200 x 2,400 mm (L x W x H) Weight: approx. 10,500 kg Points to check before sending: Weight. The other listing says about 11,000 kg. I used 10,500 kg because that is what is written on the machine (“10,5 to.”). Chuck make. The listing names a Forkardt chuck. The marking on the chuck in your second photo looked like it could be Röhm, so it’s worth a quick look. resale Chip conveyor. It is not visible in the photos. Confirm it is with the machine. Control model. The 840C comes from the listing only. The screen photo doesn’t show it clearly.

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, overall weight: 11,000 kg, turning diameter max. 480 mm turning length max. 1.000 mm control Fanuc 15 TFB swing diameter max. over bed cover 520 mm turning speed range - main spindle 7 - 3000 rpm gear ratio 2 power capacity - main spindel 53 kW spindle nose 11 DIN 55026 chuck diameter 315 mm spindle bore 103 mm rapid traverse 10 m/min feed power 15 kN number of toolpositions 12 pos. driven statition 6 pos. Shank diameter 50 mm power capacity 5,4 kW Max. Speed 2.500 / 625 min/-1 max. Torque 25 / 100 Nm total power requirement ca. 50 kW weight of the machine ca. 11 t Kdodpfxsz Hmwke Ahbju dimensions of the machine ca. 6 x 3,5 x 3,0 m The machine was in working order when taken out of service and put into storage; loading is possible. Must move in short time

Condition: used, Year of construction: 2002, turning diameter 290 mm turning length 850 mm swing diameter over bed slide 600 mm Control Siemens SINUMERIK 840D total power requirement 58 kW Automation: Portal with 2 belts Number of turrets: 3 Kjdozrzxcopfx Ahbedu Spindle: Yes # Stepping wheel: No X-axis (transverse) travel: approx. 220 mm Z-axis (longitudinal) travel: approx. 950 mm Feed rate: approx. 25 m/min (x/y) Rapid traverse: approx. 25 m/min

Condition: used, Year of construction: 2004, total length: 4,200 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,500 kg, VDF DUS 560 ti With chip conveyor Year of manufacture: 2004 FORKARDT F+315 Kdsdszwbx Tjpfx Ahbju Previously used in the training department of a gear manufacturing plant. Was in production until approximately 3 months ago. I own this 2004 lathe with chip conveyor, as well as a DUS 560 ti from 2005 and a DUS 400 ti from 2004. All three machines originate from the same factory and were used together until they were decommissioned in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also have some collet chucks for the FORKARDT centering chucks. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Condition: used, Year of construction: 2004, total length: 3,400 mm, total width: 1,900 mm, total height: 2,200 mm, overall weight: 3,000 kg, VDF DUS 400 ti Year of manufacture: 2004 FORKARDT F+250 Previously used in the training department of a gear factory. Was in production until approximately 3 months ago. I own this lathe from 2004, as well as a DUS 560 ti from 2004 with a chip conveyor, and a DUS 560 ti from 2005. All three machines come from the same factory and were used together until they were dismantled in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also have several chucks for the FORKARDT centering chuck. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Ksdpfszwbyqsx Ahbodu Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Year of construction: 1997, condition: used, Specification Data Manufacturer VDF Boehringer Model VDF 250 Cm Year 1997 Serial No. 1114.3705-24 Machine type CNC turning center / CNC lathe Control Siemens Sinumerik 840C Design Slant-bed Tailstock No Swing over bed 550 mm Swing over cross slide 480 mm Maximum turning length 1,000 mm X-axis travel 405 mm Z-axis travel 1,099 mm Spindle bore 103 mm Spindle nose Size 8, DIN 55026 Front spindle bearing Ø 150 mm Maximum chuck Ø 315 mm Spindle power 53 kW (50% duty) Maximum spindle torque 780 Nm Spindle speed 30–3,000 rpm* Turret 12 positions Tool interface VDI 50, DIN 69880 Rapid traverse X/Z Ksdpfx Aszw D I Rshbedu 10 m/min Maximum feed rate 10,000 mm/min Maximum feed force 15 kN Dimensions L × W × H approx. 5,400 × 3,200 × 2,400 mm Machine weight approx. 11,000 kg

Condition: used, Year of construction: 1997, CNC turning lathe, cycle-controlled Manufacturer: VDF Boehringer Type: DUS 560 Year of manufacture: 1997 Kdodpfx Ajz N Ew Nehbsu Control system: CNC Plus Swing diameter over bed max.: 570 mm Turning length: 1,000 mm Spindle head, size 8 according to DIN 55027 Toolholder cross-section H/W max.: 32 x 25 mm Thread pitch: 0.1 – 400 mm Spindle speed: Gear stage 1: Speed range from 3 to 500, stepless Gear stage 2: Speed range from 15 to 2,500, stepless Speed: Main drive: 8,000 min⁻¹ Feed drive X: 2,000 min⁻¹ Feed drive Z: 2,000 min⁻¹ Tailstock: Arbor taper: MK 5 Tailstock displacement by hand Feed rate: longitudinal max.: 10 m/min lateral max.: 5 m/min automatic feeds: longitudinal + lateral 0.01 – 50 Feed force max.: longitudinal 12.5 kN Main drive: 50/21 kW Voltage: 400 V / 50 Hz Total connected load: 50 kVA Accessories: Coolant pump Brinkmann 47 l/min at 0.2 bar Manual chuck Forkardt F 250 Parat quick-change toolholder Weight approx.: 4,000 kg Space requirement L/W/H: 3,150 x 1,800 x 1,800 mm 191026ä

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, turning diameter: 57 mm, swing diameter over cross slide: 365 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, bed width: 360 mm, total length: 5,000 mm, total width: 2,100 mm, total height: 2,000 mm, workpiece weight (max.): 1,600 kg, travel distance cross slide: 345 mm, overall weight: 5,000 kg, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, The VDF Boehringer DUS 560 Ti is, in terms of turning diameter, the most popular teach-in lathe from VDF Boehringer. With a standard chuck size of 315mm or larger, these machines offer optimal machining efficiency for single-piece and small batch production. This machine is currently set up in our showroom and can be viewed on site! Comes as standard with: - Original documentation - Set of tool holders + drill chuck - Fixed steady rest - 3-jaw Forkardt 315-F Ø315mm chuck Kdodpfx Ahjyvuhzjbsu Weight & dimensions: - 5,500 kg - 5,000 x 2,100 x 2,000 mm (LxWxH) For all specifications of this machine, please see the last images!

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, A used VDF BOEHRINGER DUS 800 lathe. Turning length 2000-3000 mm. Kodsz H N Hzspfx Ahbsdu Includes accessories.

Condition: used, Year of construction: 1996, turning diameter 600 mm turning length 850 mm swing diameter over bed slide 434 mm Control Siemens Sinumerik 840D total power requirement 54 kW weight of the machine ca. 10 t dimensions of the machine ca. 6000x2800 mm Spindle speed (max): approx. 0–4500 rpm Spindle speed (max): approx. 0–4500 rpm Spindle bore: approx. 65 mm Kodpfx Aezrzxiehbsdu Spindle taper: mostly DIN 55026 A6 / ISO taper X-axis travel: approx. 220 mm Z-axis travel: approx. 950 mm Feed rate: approx. 25 m/min Tools & equipment Tool turret: usually 2 turrets with ~12 tool positions Powered tools: possible depending on equipment Tailstock: optional, often NC-controlled (SK30)

Condition: used, Year of construction: 2000, turning diameter 600 mm turning length 850 mm swing diameter over bed slide 290 mm Control Siemens 840D Turning length: 850 mm Rotation diameter over table: 600 mm x-axis: 220 mm z-axis: 950 mm Control: Siemens 840D Speeds: 0-4500 rpm Tool revolver: 2 pieces Kdodpfx Aeydfpdohbju Spindle bore: 65 mm Rotation diameter: 290 mm Feed rate x/y: 25 m/min Rapid traverse x/z: 25 m/min Working height: 1200 mm

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 710 mm, turning length: 2,000 mm, turning diameter: 1,000 mm, spindle bore: 128 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 2 m/min, rotational speed (min.): 6 rpm, rotational speed (max.): 1,600 rpm, total height: 2,250 mm, total length: 5,800 mm, total width: 2,005 mm, quill travel distance: 280 mm, quill diameter: 125 mm, swing diameter over cross slide: 710 mm, torque: 4,260 Nm, overall weight: 10,100 kg, Equipment: documentation/manual, - Swing diameter over bed: 1000 mm - Swing diameter over cross slide: 710 mm - Feed rate in X, Z axes: 0.01–50 mm/rev - Feed speed in X/Z axes: 5/2.5 m/min - Rapid traverse in X/Z axes: 10/5 m/min - Feed force in X/Z axes: 20,000/12,500 N - Constant cutting speed: 1–9999 m/min - Distance between centers: 3300 mm - Faceplate diameter: 900 mm - 3-jaw chuck diameter: 500 mm - Bed width: 560 mm - Cross slide travel: 540 mm - Top slide travel: 250 mm - Metric thread pitch: 0.1–400 mm - Spindle nose: KK 11 DIN 55027 - Number of motor gear stages: 2 - Spindle speed range (first gear): 6.3–360 rpm - Spindle speed range (second gear): 28–1600 rpm - Spindle bearing diameter (front): 170 mm - Spindle bore diameter: 128 mm - Spindle internal taper: 136 metric - Tailstock quill diameter: 125 mm Kdedpfx Ajya Dz Dehbou - Tailstock quill stroke: 280 mm - Tailstock quill internal taper: Morse 6 (MK6) - Cross slide dimensions (L x W): 1005 x 320 mm - Top slide width: 200 mm - Tool cross-section per DIN 770: 40 x 25 mm - Main drive power (60%/100% duty): 46/37 kW - Main drive torque (60%/100% duty): 5300/4260 Nm - Total power requirement: 60 kVA - Power supply: 400 V - Control cabinet dimensions (L x W x H): 1800 x 500 x 1600 mm - Machine dimensions (L x W x H): 5800 x 2005 x 2250 mm - Machine weight: approx. 10,100 kg CNC controller: SIEMENS SINUMERIK - Toolholder: MULTIFIX type D - AC servo drives - Reliable stepless AC main drive - Work area lighting

Condition: good (used), Year of construction: 1991, functionality: fully functional, feed length X-axis: 3,000 mm, total length: 4,000 mm, overall weight: 8,000 kg, The machine is coming from maintenance and is accompanied by a large amount of accessories. Ksdpfx Aez Iif Hshbjdu

Condition: excellent (used), Year of construction: 2002, VDF BOEHRINGER NG 180-2 CNC Lathe / Turning Center Year of manufacture: 2002 Machine No.: 1130.2601-30 Country of manufacture: Germany Control: Siemens SINUMERIK 840D Drive system: Siemens SIMODRIVE 611 Technical Data Turning diameter: 290 mm Turning length / distance between centers: approx. 850–900 mm Swing diameter over bed: 600 mm Spindle bore: 80 mm Main spindle speed: 10–4,000 rpm Main spindle drive: Direct drive, suitable for CBN hard turning Spindle drive power at 40% ED: 56 kW Maximum spindle torque at 40% ED: 605 Nm Tool turret: 12 positions Number of turrets: 1 Driven/live tool capability: 12 stations Tool holders: Included / fitted as shown Main spindle chuck: 3-jaw Autoblok chuck The machine is equipped with a second spindle / counter-spindle arrangement, visible on the right-hand side of the working area, together with workpiece support/handling equipment. The photographs also show additional machining/tooling positions around the turret. Electrical Data Supply voltage: 400 V Phases: 3 AC Frequency: 50 Hz Main fuse rating: 125 A Rated current indicated on machine: 100 A Machine Dimensions and Weight Length: approx. 5,949 mm Width: approx. 2,300 mm Height: approx. 2,230 mm Machine weight: approx. 10,000 kg Machine: VDF BOEHRINGER NG 180-2 Year: 2002 Serial No.: 1130.2601-30 Control: Siemens SINUMERIK Max. turning diameter: 290 mm Turning length: approx. 850–900 mm Kdodjzvfhiepfx Ahbou Spindle bore: 80 mm Spindle speed: 10–4,000 rpm Spindle power: 56 kW Turret: 12 positions Dimensions: approx. 5,949 × 2,300 × 2,230 mm Weight: approx. 10,000 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, Universal lathe with cycle control VDF Boehringer VDF 400 DUS Control system: Siemens Sinumerik 840 Year of manufacture: 2014 Internal machine no.: 57 Turning length: 1,000 mm Turning diameter over bed / cross slide: 420 / 235 mm Cross slide travel: 250 mm Max. speed: 10 – 3,000 rpm Accessories - Steady rest - Extraction unit Kdjdpfjy R Rl Esx Ahbou - 3-jaw chuck Schunk 250-62 - Tool holder

Condition: used, Year of construction: 2009, greates pass round over bed 640 mm swing diameter over face slide 435 mm control SIEMENS - 840 D turning speed range 3 - 2.500 U/min centre distance 2.000 mm spindle bore 70 mm spindle diameter in front bearing 100 mm Lathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 ti The machine is in good condition. Please note that the technical details were added from comparable machines. Kodpfxozaf Hne Ahbodu - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DUS630ti | DUS 630ti | DUS 630 ti

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor Kdjdpfx Ahjwwkx Eobou  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Condition: used, Year of construction: 2006, centre distance 1000 mm turning diameter over bed 420 mm turning diameter over bed slide 235 turning length 1000 mm spindle taper DIN 55027 Gr. 6 control MANUALPlus 4110 spindle bore 51 mm turning speed range 3 - 3000 U/min feed: 5.000/10.000 mm / min drive capacity - spindle motor 11 kW taper in tailstock-quill MK 4 dia. of quill 70 mm quill stroke 110 mm coolant ja/yes voltage 400 V Number of working hours 6.908 h weight of the machine ca. 3 t dimensions of the machine ca. 3,4 x 2 x 2,2 m BOEHRINGER DUS 400 ti CNC cycle-controlled lathe, built in 2006 -Control system: Heidenhain ManualPlus 4110 -11 kW AC main drive with 2-stage gearbox -Work area cover with chip guard door -Control panel mounted on the support, moves with the machine -Holding brake -Programmable cycles -4-position quick-change turret -Size 2 tool holder on fixed base -With 1 WD ‘/25’ tool holder -Tailstock -Rapid traverse -Coolant system -Machine lamp Condition: Machine runs perfectly, no known faults, ready for immediate use. Accessories: 1 three-jaw chuck 250 mm, bore 62 mm 1 set of hard jaws 4 sets of soft jaws including jaw holders 23 tool holders including tools Kdsdpfjzgigdjx Ahbou Translated with (free version)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Used CNC lathe Manufacturer: Böhringer Model: NG 180 Year of manufacture: 2004 Equipment: includes steady rest Ksdpfsz Ant Uex Ahbsdu

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 70.0961.000.253, TECHNICAL DETAILS: Turning diameter: - Over bed: 800 mm - Over carriage: 560 mm - Diamter of face plate: 750 mm Height of centers: - Over flat ways: 380 mm - Over Vee ways: 358 mm Gap, bed and gap piece: Ksdpfxsup A Rzs Ahbodu - Turning diameter in gap: 980 mm - Width of gap in front of face plate: 380 mm - Swing in gap: 1040 mm - Width of gap in front of face plate within swing diamter: 330 mm - Width of bed: 560 mm Headstock spindle: - Diameter of spindle bore: 90 mm - Spindle diamteres in front bearing: 145 mm - Taper in spindle: 6 Morse Spindle speeds: - Number: 18 - Spindle speed ranges: 7,1 - 355 RPM 9,0 - 450 RPM 11,2 - 560 RPM Power required: 7,5 - 14 kW Feeds: - Number: 32 - Sliding feeds per revolution: 32 longitudal feeds: 0,071 - 2,5 mm/rev. 32 cross feeds: 0,04 - 1,4 mm/rev. Extras: additional equipment, manuals for machine

Condition: used, Year of construction: 1983, Boehringer DUE 500 Guide and Lead Screw Lathe Condition: Used Geometrically overhauled in 2026, geometric protocol available Year of manufacture: 1983 The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled and underwent a comprehensive functional test. The machine geometry was inspected and adjusted. A test protocol according to DIN 8605 is available. As part of the work, the wedge strips were also adjusted, and the coolant pump was overhauled. Technical data: Center height: 250 mm Distance between centers: 1300 mm Spindle bore: 62 mm Chuck diameter: 300 mm Spindle speed: 2240 min-1 Motor power: 11 kW Approximate footprint: 4000 x 1525 mm Approximate weight: 4300 kg Equipment: 3-axis digital display, NEW Coolant system Chuck guard with microswitch Emergency stop Roller cover Kedpfez A Tt Djx Ahbjdu Machine light Geometric protocol Inquiry item: Transportation costs will be provided in a separate quote.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 620 mm, travel distance Z-axis: 2,000 mm, bar diameter (max.): 110 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, Horizontal turning machine manufactured in 2007. This BOEHRINGER VDF 400 CM features a 500 mm chuck and a live tool for enhanced versatility. It offers an impressive X-axis travel of 620 mm and Y-axis travel of 2000 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details. • Chuck diameter: 500 mm Technical Specification Kjdezzp Aujpfx Ahbodu Driven Tools Yes Counter Spindle No

Condition: used, Max. turning length: 1000 mm, center height: 250 mm, hollow spindle diameter: 60 mm, max. speed: 2240 rpm, with 3-jaw chuck, manufacturer: SCHUNK, type: ROTA-S-PLUS, diameter: 250 mm, with machine light, steady rest, and Multifix steel tool holder. Kedpfx Ahoz Nhrcsbodu

Condition: used, Year of construction: 1996, turning diameter 250 mm Kdedpfx Aheyan R Aobeu turning length 1000 mm Control Philips CNC-Steuerung weight of the machine ca. 8 t PHILIPS CNC control X-axis: 295 mm / Y-axis: 295 mm Center distance: 1000 mm Max. diameter on the bed: Ø 310 mm Max. diameter when turning: Ø 250 mm. Maximum turning speed: 4500 rpm. Spindle bore diameter: Ø 78 mm Turret with 8 tools Weight: approx. 8 tons