Used Bnc for sale (31)

Condition: good (used), Year of construction: 2007, - Control unit FAGOR 8055 - max. turning Ø: 550 mm - max. turning length: 2000 mm - Tool turret with 8 stations - travel: X= 300, Z= 2150 mm - Quill travel: 150 mm - Dimensions LxWxH: 4200 x 2100 x 2050 mm - Weight: 4,900 kg Accessories: - 2 steady rests Ccbsmto - various tools

Year of construction: 2006, Condition: ready for operation (used), Travel X/Z: 500mm/1600mm, speed: 4500rpm, spindle bore: 65mm, spindle power: 11kW, tool positions: 8, rapid traverse X/Z: 15m/min, weight: approx. 3450kg. Documentation available. On-site inspection is possible. Dqw3Fv

Condition: good (used), Year of construction: 2007, spindle bore: 65 mm, turning length: 1,680 mm, quill stroke: 150 mm, quill diameter: 80 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (min.): 100 rpm, spindle speed (max.): 4,500 rpm, feed length X-axis: 260 mm, feed length Z-axis: 1,680 mm, feed rate X-axis: 15 m/min, feed rate Z-axis: 15 m/min, bed width: 355 mm, total length: 3,520 mm, total width: 1,935 mm, total height: 2,022 mm, workpiece weight (max.): 1,500 kg, type of input current: three-phase, spindle motor power: 11 W, overall weight: 3,150 kg, rotational speed (min.): 100 rpm, rotational speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, Lathe in good condition läut perfectly. Chpk3I03Bi Three jaw chuck new only little run. other info see data sheets

Condition: good (used), Year of construction: 2011, operating hours: 43,639 h, Functionality: fully functional, machine/vehicle number: 1111151027, turning diameter over cross slide: 310 mm, spindle bore: 82 mm, turning length: 2,000 mm, turning diameter: 275 mm, center width: 275 mm, turning diameter over bed slide: 550 mm, quill stroke: 150 mm, bed width: 405 mm, total length: 4,190 mm, total width: 2,245 mm, total height: 2,050 mm, workpiece weight (max.): 2,000 kg, chuck outer diameter: 250 mm, Microturn Challenger BNC 2280 CNC lathe with "FAGOR" control 8055i/A TC center height 275 mm max. turning length 2000 mm spindle holder ASA A1-8 spindle bore 82 mm Spindle speed infinitely variable from 80-2400 rpm. with constant cutting speed Weight (net / gross) approx. 4900 / 5300 kg 02. automatic tool turret BARUFFALDI TB 160 with cooling through the tool and Dqkpy9 tool holder, mounting on rear cross support 8-fold VDI 40 - without holder 03. transportable electronic handwheel 04. chip conveyor 2000 mm turning length in link design with "wash-down" -rinsing cleaning system 05. incl. chip trolley 06. Fixed steady rest with roller inserts 20-200 mm diameter

Condition: good (used), Year of construction: 2002, Functionality: fully functional, CNC lathe Buffalo Machinery Type: BNC-2240XL Year of manufacture: December/2002 Control: Fagor Tailstock X-axis 300mm Z-axis 1150mm Turret: 8-fold VDI Power consumption max 31Kva S30Dqtc8 Speed: 3,500 rpm Power 11kW Bore diameter 82mm Spindle nose A2-8 Rapid traverse x 15m/min Rapid traverse z 15m/min Positioning accuracy +-0.005mm Repeat accuracy +-0.005mm Swing diameter over bed 405mm Power consumption max 31Kva Dimensions (LxWxH): 3.40 x 2.30 x 2.60m Weight: 3.900kg Machine was only used for plastic processing without emulsion.

Condition: used, Year of construction: 2006, turning diameter Ø30/300mm mm turning length 3055mm +/-0.3mm mm control Dprd2D total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: good (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 1511151358, spindle bore: 82 mm, turning length: 1,500 mm, turning diameter over bed slide: 650 mm, spindle speed (min.): 80 rpm, spindle speed (max.): 2,400 rpm, total length: 48,370 mm, total width: 22,450 mm, total height: 20,500 mm, overall weight: 4,300 kg, three-jaw chuck diameter: 400 mm, power: 15 kW (20.39 HP), Good used lathe with FAGOR 8055FL control and tailstock (no lynette) Ls3Nlmyom

Condition: ready for operation (used), Functionality: fully functional, CNC automatic lathe Miyano BNC-34S Control: Fanuc Series O-Mate T Main spindle: 34mm Counter spindle and 1x turret including: Sas9Hvq2P2 -Transformer -tool holder -bar feed LNS-Hydrobar -Collets -Chip conveyor (defective)

Condition: new, Working area round 360 mm Working area quadrant 360 x 360 mm Working area bundle W x H 180 - 280 x 50 - 160 mm Cutting speed 20 - 100 m/min (infinitely variable) Saw blade dimensions 4,420 mm x 34 mm x 1.1 mm Hydraulic saw blade tensioning Multiple feed 500 mm Drive power 3.7 kW Machine size LxW 2,500 x 2,200 mm Machine weight 2,300 kg Standard equipment - Hydraulically controlled full-stroke double clamping system. - Driven by IE3 motor with inverter (PMSM, Euate IE4) - User-friendly NC touchscreen control with high-end system (NCIII CONTROL) - Feed rate display on the HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC board control for all electrical and hydraulic functions - Floating pendulum vice - Two-piece front vice - Stepless speed control by inverter - Hydraulic blade clamping - Roller bearings with hydraulically controlled carbide blade guide system - Automatic working height control through quick start sensor - Preset cutting counter with cut-off function - Nesting device for bundle cutting (hold-down device) - Power-operated blade cleaning brush - Saw blade monitoring with regard to standstill and blade breakage - Flushing hose for machine cleaning - Work light - Roller table with 2 m length - One M42 bi-metal saw blade - One set of tools and one toolbox Gmf8Bg

Year of construction: 1979, Condition: ready for operation (used), General Data Measurements width 2300 mm Measurements depth 4180 mm Measurements height 2690 mm Machine weight 3450 kg Bsaovsxelzm Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 1250 rpm Tool taper ISO 40 Movement X-Axis Movement 1250 mm Y-Axis Movement 900 mm Z-Axis Movement 1000 mm Table Outer length 1120 mm Outer width 1000 mm Table load 3000 kg This 4-axis TOS WHN 9B NC boring machine was manufactured in 1979 and retrofitted in 2010. It features a Heidenheim iTNC 530 control system, a spindle diameter of 90 mm, and ISO 40 taper. The rotary work table measures 1120 x 1000 mm and supports a maximum load of 3000 kg. Fully functional and currently in operation, the TOS WHN 9B NC machine we have for sale represents a robust addition to any workshop. Contact us for further details. Application Types Milling

Condition: good (used), Year of construction: 2010, The machine is in good technical condition, after previous agreement the possibility of testing. Table length: 1120 mm Table width: 1000 mm Maximum table load (uniform): 3000 kg X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Spindle diameter: 90 mm Machine height: 2690 mm Machine length: 2300 mm Machine width: 2300 mm Maximum table load (uniform): 3000 kg Machine weight: 3450 kg Spindle diameter: 90 mm Spindle taper : ISO 40 Equipment: system Heidenheim 530 3Aiu8Ht2U

Condition: as good as new (ex-display), Year of construction: 2020, Functionality: fully functional, sheet thickness steel (max.): 3 mm, sheet thickness aluminum (max.): 5 mm, overall weight: 1,600 kg, total length: 6,100 mm, total height: 1,200 mm, total width: 1,450 mm, bending length: 3,500 mm, type of input current: three-phase, power: 7.5 kW (10.20 HP), input voltage: 400 V, pipe diameter: 63 mm, usable length: 3,500 mm, material thickness: 3 mm, bending angle: 190 °, bending radius: 250 mm, oil tank capacity: 50 l, Equipment: documentation/manual, Cesurbend PB NC 65A mandrel pipe bending machine with NC control. • Max. Pipe Diameter 63 • Max.Wall Thickness (mm) 3 • Max. Bending Angle (°) 190 • Max. Bending Radius (mm) 250 • Min. Bend Radius (mm) 45 • Pipe Loading Length (mm) 3500 • Bending Speed (rev/min) 7-10 • Working Tolerances-Bending (mm) ± 0.25 mm • Bending Engine Power (kW) 7,5 • Hydraulic Engine Power (kW) 4 • Max.Hydraulic Pressure (bar) 200 • Oil Tank Capacity (lt) 50 • Machine Width (mm) 1450 • Machine Length (mm) 6100 • Machine Height (mm) 1200 • Machine Weight (kg) 1600 Pipe bender comes with tooling to suit 25mm box tube and 38mm diameter pipe -Quaternary Adjustable Gauge Distance Bracket -Chain twisting system -Geared motor driven -Touch screen control panel -Foot pedal control -Hydraulic movement of the mandrel -Hydraulic recline movement -Hydraulic clamping movement -Hydraulic slide system -The machine is 4 pistons. -7"Color Touchscreen Display -15 sequential bending possibilities -100 program memory capacity programming -PLC Control Schneider Cws82Wlsza Machine comes from excess stock, currently in our sealed, heated warehouse. Frequently powered up and maintained.

Condition: used, Three-phase motor, electric motor -Power: 1.5kw -Speed: 940 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 54 -Number: 1x available U9Wb8Qgwd -Dimensions: 400/270/H220 mm -Weight: 24kg

Year of construction: 1999, Condition: ready for operation (used), Grinding diameter: 500mm, grinding length: 3000mm, centre height: 255mm, grinding wheel diameter: 500mm, cutting speed: 100mm/min, control: Siemens SIMATIC HMI, connected load: 22kVA, length: 8900mm, width: 3500mm, height: 1935mm, weight: 10.5t, with documentation and extensive accessories, an on-site inspection is possible. Bljgurgxxbw

Condition: new, Year of construction: 2023, saw band length: 3,920 mm, saw band width: 34 mm, Double column bandsaw fully automatic Everising H-260 HB Cutting range round: 0 - 260mm Cutting range square: 300 x 260mm Bundle tension: Width: 145 - 190mm Bundle tension height: 30 - 130mm Bjvb3Rs9Gtu Drive power: 3.7 kW Saw blade dimensions: 3920 x 34 x 1.1mm Weight: 1759 KG Machine dimensions: 2170 x 2100mm The standard equipment of the machines is as follows: Solid steel construction in double column principle - NC feed system - Frequency-controlled cutting speed (infinitely variable, inverter-controlled) - Digital cutting speed display - Hydraulically controlled double horizontal clamping vices - Hydraulic saw band tensioning - Saw band guides (incl. band back guide) made of carbide - Hydraulically pre-tensioned band guides - Precise PLC control (SPS) for all hydraulic and electrical components. - Cutting counter with automatic switch-off - Automatic out-of-stock switch-off - Multi-job function - Bundle clamping device - Driven chip brush - Automatic belt breakage control incl. emergency stop - Chip flushing gun - Flexible work light - 2 meter roller conveyor - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction - Cutting process control Extensive complete German documentation.

Condition: new, Year of construction: 2023, saw band length: 5,450 mm, saw band width: 41 mm, Double column bandsaw fully automatic Everising H-460 HB Cutting range round: 0 - 460mm Cutting range square: 460 x 460mm Bundle tension: Width: 195 - 310mm Bundle tension height: 120 - 230mm Drive power: 5.5 kW Saw blade dimensions: 5450 x 41 x 1.3mm Weight: 3030 KG Machine dimensions: 2820 x 2190mm The standard equipment of the machines is as follows: Solid steel construction in double column principle - NC feed system - Frequency-controlled cutting speed (infinitely variable, inverter-controlled) - Digital cutting speed display - Hydraulically controlled double horizontal clamping vices - Hydraulic saw band tensioning - Saw band guides (incl. band back guide) made of carbide - Hydraulically pre-tensioned band guides - Precise PLC control (SPS) for all hydraulic and electrical components. - Cutting counter with automatic switch-off - Automatic out-of-stock switch-off - Multi-job function - Bundle clamping device - Driven chip brush - Automatic belt breakage control incl. emergency stop - Chip flushing gun - Flexible work light Fgiggqk2F - 2 meter roller conveyor - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction - Cutting process control Extensive complete German documentation.

Condition: new, Year of construction: 2023, saw band length: 4,420 mm, saw band width: 34 mm, Double-column bandsaw, fully automatic Everising H-360 HB Cutting range round: 0 - 360mm Bjpwfu7Cwx2 Cutting range square: 360 x 360mm Bundle tension: Width: 180 - 280mm Bundle tension height: 50 - 160mm Drive power: 3.7 kW Saw blade dimensions: 4420 x 34 x 1.1mm Weight: 2310 KG Machine dimension 2500 x 2200mm The standard equipment of the machines is as follows: Solid steel construction in double column principle - NC feed system - Frequency-controlled cutting speed (infinitely variable, inverter-controlled) - Digital cutting speed display - Hydraulically controlled double horizontal clamping vices - Hydraulic saw blade tensioning - Saw band guides (incl. band back guide) made of carbide - Hydraulically pre-tensioned band guides - Precise PLC control (SPS) for all hydraulic and electrical components. - Cutting counter with automatic switch-off - Automatic out-of-stock switch-off - Multi-job function - Bundle clamping device - Driven chip brush - Automatic band breakage control incl. emergency stop - Chip flushing gun - Flexible work light - 2 meter roller conveyor - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction - Cutting process control Extensive complete German documentation.

Condition: excellent (used), Year of construction: 2008, operating hours: 43,500 h, Functionality: fully functional, laser power: 4,000 W, sheet thickness aluminum (max.): 10 mm, sheet thickness steel (max.): 20 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, worktable length: 4,000 mm, worktable width: 2,000 mm, Equipment: cooling unit, Technical data: Make TRUMPF Bewwjxc0 Type TruLaser 3040 - 4 kw Year of manufacture 2008 Working area 4,000 x 2,000 x 115 mm Control Siemens Sinumerik 840 D Laser power 4,000 watts Max. Sheet thickness mild steel 20 mm Max. Sheet thickness stainless steel 15 mm Max. Sheet thickness aluminum 10 mm Operating hours NC on: 43,500 h / beam on: 13,400 h STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TruFlow 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer and longitudinal conveyor belt - Drives: maintenance-free three-phase servomotors - Automatic focus position adjustment AutoLas Plus - HI-LAS high-pressure cutting - Plasma sensor system PMS - Fast processing with SprintLas - ContourLas for the production of small holes - Programmable cutting gas pressure setting - Laser cutting head with 5" lens with quick-change device - Laser cutting head with 7.5" lens with quick-change device - DIAS III - Laser logbook function - Automatic switch-off - Work area lighting - Control system: PC-based open control system, simple operation and networking, online help, - diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, BNC/RJ45 network connection - Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, extraction system and compact dust extractor, protective cabin - Electrical equipment for three-phase current 400 V / 50 Hz - Paintwork: textured paint white RAL 9002 / gentian blue RAL 5010 EXTENDED EQUIPMENT: - More powerful TruFlow 4000 laser incl. magnetically levitated turbine (LSM) - PCS - Preparation for LoadMaster automation

Condition: ready for operation (used), Condition Used Stock Number 46320 This listing is for a Hanna HI 2210 pH Meter. The unit is in full working condition and is ready for immediate release. The Hanna HI 2210 pH Meter is a robust benchtop device tailored for precise laboratory pH testing. Renowned for its user-friendly interface, accuracy, and cost-effectiveness, this meter is an essential tool for professionals in various fields, including chemistry, biology, and environmental science. Key Features: Microprocessor-Based Design: Enhances accuracy and reliability for consistent and trustworthy measurements. Extra Large LCD Display: Features a 6.5 in. x 1.5 in. screen that presents pH and temperature readings simultaneously for easy monitoring. Cfg0Zsvp Simultaneous Readings: Displays both pH and temperature on the same screen, facilitating quick analysis and decision-making. Calibration Expiration Reminder: Alerts users when it’s time to re-calibrate, ensuring optimal performance and accuracy. Automatic Calibration: Supports up to 5 standard buffer solutions for straightforward calibration processes. Stability Indicator: Provides visual cues during calibration and measurement for error-free operations. Automatic Temperature Compensation (ATC): Adjusts pH readings based on the temperature of the solution, ensuring accurate results across varying conditions. Specifications: Input Power: AC/DC input (230 V AC) with EuroPlug Compatibility: Works with a wide range of pH electrodes featuring BNC connectors. Supplied Accessories: HI 1131B: Glass body pH electrode for accurate pH measurement. HI 7662: Temperature probe for simultaneous temperature readings. Electrode Holder: For convenient placement of the pH electrode during measurements. Buffer Solutions: Includes pH 4.01 7.01 solutions for calibration. Electrolyte Solution: Enhances electrode performance and longevity. Power Adaptor: 12 V DC power adaptor for reliable operation. Instruction Manual: Comprehensive guide for user setup and operation.

Condition: good (used), Year of construction: 2005, Punching force 220 kN Laser power in watts 2000 Travel distance - x 2585 mm Travel distance - y 1280 mm Sheet thickness 8 mm Cutting capacity for mild steel 8 mm Cutting capacity for aluminum 3 mm Cutting capacity for stainless steel 4 mm Workpiece weight max. 200 kg Machine weight approx. 16,000 kg Equipment: - Sturdy C-frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, Ejection cylinder on laser chute - 2 x good parts box - Laser unit: High-frequency excited CO2 laser TLF 2000, vibration-insulated, integrated in machine frame, incl. cooling unit and laser control DIAS 3 - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5" lens, quick-change device, APC distance control - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Sinumerik 840D control system, 10.4" TFT color screen, online help, diagnostic function, 3.5" floppy disk drive, RJ45 network connection - Safety: multi-beam light barriers, quick shutdown hydraulics, Dqm0Ol suction and compact dust protection against stray radiation on the cutting head - TLF 3200 laser incl. 9" cutting head for stainless steel - AutoLas Plus - MultiTool function - MultiBend function - Thread forming function - Sealing/quick beading function - Rolling technology function - Softpunch function - 1 x additional clamping claw - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Blow-out device for small parts - BNC network connection instead of RJ45 connection Operating hours: Beam On: approx. 13549 h Laser On: approx. 49949 h

Condition: ready for operation (used), Year of construction: 2005, operating hours: 13,549 h, Functionality: fully functional, punching force: 22 t, workpiece weight (max.): 200 kg, laser power: 3,200 W, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 3 mm, TECHNICAL DETAILS Punching work area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control system: Siemens Sinumerik 840 D Laser power: 140 - 3,200 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Cutting capacity mild steel: 8 mm Cutting capacity aluminum: 3 mm Cutting capacity stainless steel: 4 mm Workpiece weight: max. 200 kg Punching force: 220 kN Active hold-down device: 4.5 - 20 kN Linear magazine: 21 tools with 3 clamps Programmable chute: 500 x 500 mm Ctfu0Grqvi C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Stroke sequence marking: 2800 1/min Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 tons Laser switch-on time: 49,949 h Cutting time: 13,549 h EQUIPMENT - Sturdy C-frame - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - 2 x good parts box - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5" lens, quick-change device, distance control APC - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Safety: multi-beam light barriers, quick shut-off hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 3200 laser incl. 9" cutting head for stainless steel - AutoLas Plus - MultiTool function - MultiBend function - Thread forming function - Marking/quick beading function - Rolling technology function - Softpunch function - 1 x additional clamping claw - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Condition: excellent (used), AdBlue refueling truck Type: HT-Mobilus 200 AdBlue Whether in the automotive industry or directly in vehicle operation: with the MOBILUS-AdBlue, the safe refueling of your vehicles is possible in a safe and economically efficient manner. The MOBILUS AdBlue mobile refueling system complies with all relevant technical and legal regulations and is therefore often used in research and development projects. Convince yourself of the quality of this mobile urea refueling device. Technical data: Manufacturer: Rietbergwerke GmbH & C0. KG Type: HT-Mobilus 200 AdBlue Year of construction 2018 Technical data: Dimensions L x W x H: 142 x 73 x 135cm Empty weight: approx. 260kg Useful volume tank: approx. 175 liters Power supply: Connected load: 3.0KW Supply voltage: 400/230V / 50 HZ NPE Fuse protection: 16A Heating: Connected load: 4.0KW Supply voltage: 400V Bk7Ftepnc2K Delivery pump: Output: 0.75KW Supply voltage: 400V / 50 HZ Further technical data: Suction and circulation pump: Power: 0.4KW Supply voltage: 230V / 50 HZ Dispensing valve: Volume flow: max. 40l/min Operating pressure: 0.5 - 3.5 bar Control range: Volume flow: 3.5 l/min. - 45.0 l/min Temperature: 15°C - 45°C Frequency converter: 1,800 1/min BNC sockets: Output: 0 - 10V Operating temperature Operating temperature: max. 45°C Storage temperature: down to -30°C Materials Container: LDPE All other components in contact with the product: LDPE or stainless steel Transport trolley: Steel, powder-coated Seals / hoses: EPDM Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 641500000 378 Year of manufacture approx. 2000 Input values Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed - Self-test when switching on Additional connections: - 9 Pol. D-Sub (Trigger In, AC On, etc.) - 25 Pol. D-Sub (printer) - BNC (EXT VREF) Nhdcb - 9 Pol. D-Sub (RS-232C interface) - 24 Pol. Centronic (GPIB) - 25 Pol. D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual with CD Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition 3 pieces available, price per piece

Condition: excellent (used), operating hours: 58,000 h, Functionality: fully functional, laser power: 5,000 W, TRUMPF Trumatic L 3050 - 5 kw TECHNICAL DATA: Make TRUMPF Type Trumatic L 3050 - 5 kw Year of manufacture 2005 Working area 3,000 x 1500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. Sheet thickness Mild steel 25 mm Max. Sheet thickness stainless steel 20 mm Max. Sheet thickness aluminum 12 mm Operating hours approx. 58,000 h STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - Laser unit: TLF 5000 CO2 laser, high-frequency excited, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: Gantry drive in combination with linear direct drives - Laser power control - HI-LAS high-pressure cutting - Plasma sensor system PMS - Fast processing with SprintLas - ContourLas for the production of small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Quick-change cutting head device - Automatic sheet outer edge detection - Capacitive height control (DIAS) - Process Control System (PCS) - Position laser diode - Automatic focus position adjustment AutoLas Plus - Automatic switch-off - Work area lighting - SIN 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated with nitrogen ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin - Network connection: BNC/RJ-45 network connection - Electrical equipment for three-phase current 400 V / 50 Hz Ebq2Vwo0Z - Paintwork: textured paint white RAL 9002 / gentian blue RAL 5010 EXTENDED EQUIPMENT: - Additional laser cutting head with 9-inch lens - NEW transmitter tubes on delivery

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Bdesj2Ivoa Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed - Self-test when switching on - Supplied as shown, without additional accessories and connection cable Additional connections: - BNC (EXT VREF) - 9 Pol. D-Sub (RS-232C interface) - 24 Pol. Centronic (GPIB) Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition