Used Stork for sale (52)

Condition: used, Year of construction: 1969, Overview This premix beverage mixer was manufactured in 1969 by Stork Jansen & Sutorius N.V. Codpfx Aez I R N Heiljrh The machine is designed for the production of carbonated and non-carbonated soft drinks as well as carbonated water. It is configured as a multi-tank mixing and carbonation system including product tank, vacuum tank and saturator for consistent mixing and CO₂ dosing. The unit has been fully refurbished in 2020, is currently in operation, and available for inspection. Technical data - Capacity: approx. 15,000 L/h - Application: Beverage mixing (carbonated and non-carbonated soft drinks, carbonated water) - Configuration: Multi-tank system (product tank, vacuum tank, saturator) - Operating pressure: up to approx. 6 bar (typical 1.2 – 1.4 bar) - CO₂ content: approx. 6.5 – 7 g/l - Electrical: 380 V, 3-phase - Drive power: approx. 5.5 – 7.5 kW Scope of Delivery  - Premix beverage mixer | Stork Jansen & Sutorius N.V. | 1969 / 2020 | Multi-tank system with carbonation unit - Plate heat exchanger | Alfa Laval  - Pump unit | Siemens | With motor - Control system | Kinco | HMI touchscreen - Frequency converter 

Condition: used, Molding line for filled products such as cordon bleu (fresh weight 100gr) The fresh weight per portion is ± 100 grams. The main components are 48 grams of ground meat 10 grams of processed cheese 10 grams of sausage or ham the rest is breadcrumbs consisting of: “Risco Brevetti” vacuum filler Type RS303 (filler-grinder) with loader for Eurobins with meat grinder heat (Filler-Grinder), Type RS 70 BJ 2010 filler-grinder opening 2 filling strips on top of each other of 90 x 5 mm Cedpjzzkz Esfx Ailsrh + MasterSlice “Marel - Stork” Type 1511 Slicer for sausage or ham bars caliber 50 mm + “Karl Schnell” vacuum filler Type 596 P 10 SE Used to fill the processed cheese linked to the Masterfill + “Marel” MasterFill Type MTFU Takes the processed cheese from the Karl schnell vacuum filler and portion it + “Marel” MasterFormer Type TA1521 Using virtually no pressure, the MasterFormer system produces high quality filled and unfilled products with a handmade look and retention of structure and texture of meat mass. The MasterSlice and MasterFill modules allow solid, liquid and paste fillings to be added to the meat mass in the MasterFormer supply line. The MasterFormer offers a wide variety of end product possibilities with minimal waste of ingredients and maximum flexibility, including cordon bleu or steak haché. Features : · Ultra low-pressure forming, to retain structure and texture of meat mass · Fully automatic production of filled and unfilled products, with a handmade look · MasterSlice adds cut-to-measure slices of solid filling to the basic raw material · MasterFill is used to add liquid or paste fillings · Minimal waste of ingredients · End products can be packed directly onto trays or, alternatively, are ready for further processing · Easy to operate and clean in good condition in good working order The machine is fully inspected and tested both mechanically and electrically. Parts showing visible wear will be preventively replaced in our workshop.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66931, clamping force: 6,600 kN, screw diameter: 98 mm, clearance between the columns: 900 mm, displacement volume: 3,885 cm³, injection pressure: 2,100 bar, This machine underwent a complete overhaul and was retrofitted in 2023. Cedpozlrc Sjfx Ailorh

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66924, clamping force: 6,600 kN, screw diameter: 115 mm, clearance between the columns: 1,000 mm, displacement volume: 5,349 cm³, injection pressure: 1,800 bar, injection weight: 5,082 g, opening stroke: 1,200 mm, Used Stork IMM 6600EP-8650 injection molding machine. The machine has been overhauled, tested and repaired. Crjdpfx Aswhk Iusileh

Condition: used, Year of construction: 2012, machine number type model year clamping force distance between opening stroke screw shot volume tie bars diameter ton mm mm mm cm3 Crodpfszykziox Ailjh 1 2000-1450 S+ 2011 200 530x530 550 62 845 E-screwdrive 2 2000-850 S+ 2012 200 530x530 550 52 499 E-screwdrive 3 2000-850 S+ 2012 200 530x530 550 45 374 E-screwdrive 4 2500-850 S+ 2006 250 585x585 575 45 374 E-screwdrive 5 2500-1450 S+ 2009 250 585x585 575 62 845 E-screwdrive 6 3300-2150R S+ 2010 330 630x630 620 62 513 E-screwdrive 7 3300-5650 SXS 2006 330 630x630 620 84 1247 E-screwdrive 8 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 9 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 10 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 11 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 12 4400-5650R S+ 2008 440 730x730 720 84 1247 E-screwdrive 13 4400-5650 S+ 2009 440 730x730 720 84 2494 E-screwdrive 14 5500-5600 SXN 2000 550 830x830 850 98 3394 Hydraulic motor 15 5500-5650R 2K S+ 2009 550 830x830 850 84 1247 E-screwdrive 16 5500-5650R 2K S+ 2011 550 830x830 850 84 1247 E-screwdrive 17 6600-8650R S+ 2008 660 900x900 940 98 1886 E-screwdrive 18 6600EP-8650 S+ 2009 660 1000x1000 1200 115 5349 E-screwdrive 19 6600-8650R S+ 2010 660 900x900 940 98 1886 E-screwdrive 20 12000-19000 SXN 2003 1200 1200x1200 1500 150 12193 Hydraulic motor

Condition: used, Year of construction: 1977, machine/vehicle number: 02106040, Model: HVV 16; 16 filling valves. Overhauled in 2013 Crodpfxjz Ia Ils Ailjh filling valves: 16 working direction: right-left (CCW) filling system: vacuum filling

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. Cedpfx Aeu Nhiqsilerh The machine comes with original electrical documentation.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, STORK TOWNSEND BBC1500W | Spine cutter (splitter / carcass saw) Cedey Umm Tspfx Ailorh Manufacturer: Stork Townsend B.V. Model / Type: BBC1500W Serial number: C36E589 Year of manufacture: 2009 Power supply: 400 V / 50 Hz / 3 phases Rated power: 1.5 kW Overall dimensions: 2100 x 1300 x 1500 mm Machine weight: 250 kg The Stork Townsend BBC1500W is a professional, automatic spine cutter, a highly specialized processing machine designed for high-volume slaughter lines and meat processing plants. This device plays a crucial role in processing pork carcasses (particularly bellies and middle pieces) and in the processing of large poultry (turkeys, geese), where the precise removal or scoring of the spine and dorsal ribs determines the classification and final commercial value of the meat cuts. The machine's mechanism is based on the automatic centering of the product within the working area. The product is fed along dedicated guides, which stabilize the carcass immediately before contact with the cutting disc, which has an optimally selected tooth profile. Thanks to a 1.5 kW drive, the device guarantees a clean, perfectly even cut without bone splinters or tearing of adjacent muscles (such as pork loin or tenderloin). The use of a mechanical cutter eliminates the heavy, dangerous, and inconsistent manual work previously performed with cleaver saws or manual splitters.

Condition: used, Year of construction: 2004, We are offering this used STORK MPS B.V. bone separator. Type no: DMM50; Serial no: B27-13B; Order no: BX152004; Voltage: 400V; PHASE/Hz: 3/50; Netherlands; Year of manufacture: 2004. Control cabinet is not included. Net price: 7,000 EUR. Price negotiable. Crodpfoy Hi A Ujx Aileh

Condition: excellent (used), Year of construction: 2011, We are pleased to present for Sale the Automatic transfer system TREC NT from Stork. Manufacturer: Stork Credpfx Aewdibxjiloh Type: TREC NT Year: 2011 Iasbor Igpgstt Shdfor Capacity: 13500bph Condition: Used/Very good

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: X82600, clamping force: 12,000 kN, screw diameter: 150 mm, clearance between the columns: 1,200 mm, displacement volume: 12,193 cm³, injection pressure: 1,500 bar, injection weight: 11,584 g, opening stroke: 1,400 mm, Used Stork IMM 12000-19000 injection molding machine. Crjdpfxewhkfys Ailsh

Condition: excellent (used), Year of construction: 2011, Injection Moulding Machine Stork S+ 9000-12550 Control system: CDS700 Year of manufacture: 2011 The machine is in very good technical condition, fully operational and ready for immediate use in an industrial environment. Clamping Unit Clamping force: 9000 kN Platen dimensions (H × W): 1570 × 1560 mm Tie bar clearance (H × W): 1010 × 1010 mm Minimum / maximum mould height: 300 – 1190 mm Maximum opening stroke: 2290 mm Locating ring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 115 mm Injection volume: 6232 cm³ Credpexyqyxefx Ailsh Shot weight (PS): 5733 g Injection pressure: 1740 bar Maximum injection speed: 300 mm/s Additional Equipment Pneumatic valves – 6 pcs Core – 1 pc The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2011, Stork S+ 6600-5650 Injection Moulding Machine Control System: CDS700 Year of Manufacture: 2011 The machine is in very good technical condition, fully operational, and ready for immediate use in an industrial environment. Clamping Unit Clamping force: 6600 kN Platen dimensions (H × W): 1370 × 1370 mm Tie-bar spacing (H × W): 900 × 900 mm Min. / Max. mould height: 300 – 900 mm Maximum opening stroke: 1840 mm Locating ring diameter: 200 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 84 mm Injection volume: 2575 cm³ Shot weight (PS): 2369 g Crodpexyqyfsfx Ailoh Injection pressure: 1650 bar Maximum injection speed: 500 mm/s Additional Equipment Pneumatic valves – 6 pcs. Core – 1 pc. The machine is available for inspection and testing under power. Photos and operational videos available upon request. We provide assistance with loading and transport arrangement.

Condition: used, Professional bottling monoblock from the renowned manufacturer STORK, designed for filling alcohol (vodka, liqueurs, and other still beverages) into glass bottles with aluminum ROPP closures. Technical data: Crjdjyxv Nlopfx Ailsh Manufacturer: STORK Year of manufacture: 1991 Model: HVS 32/8 Machine type: Monoblock (filling + capping) Capacity: approx. 8,000 bottles/h Filler: 32 valves Capper: 8 ROPP heads (aluminum, e.g., 28 mm) Technical condition: Used machine, condition as shown in photos, serviced and operational up to the end of production.

Condition: used, Year of construction: 2009, total length: 1,500 mm, total width: 1,500 mm, total height: 2,800 mm, overall weight: 800 kg, input voltage: 400 V, We offer the FIM RotoVac industrial poultry final inspection unit, designed for high-throughput slaughtering lines. The machine ensures effective removal of slaughter residues, improving the quality of the final product and meeting the strict hygiene requirements of the food industry. Technical Data: Capacity: up to 13,500 birds per hour Number of Workstations: 16 Operating System: Carousel (rotary) Operating Medium: Vacuum Power Supply: 400 V / 50 Hz Material: Food-grade stainless steel Cjdpfey Nb A Ejx Ailerh Integration: Poultry evisceration lines Key Advantages: - Highly efficient residue removal - Rotary vacuum nozzle system (RotoVac) - Robust and durable industrial design - Automatic nozzle cleaning after each cycle - Adjustable height and settings for different carcass sizes - Seamless integration with existing processing lines MAREL / STORK / EVICTION / POULTRY / FIM / ROTOVAC

Condition: excellent (used), Year of construction: 2010, Stork S+ 9000-8650 Injection Moulding Machine Codpfxsxyqyrj Ailjrh Control system: CDS700 Year of manufacture: 2010 The machine is in very good technical condition, fully operational, and ready for immediate use in an industrial facility. It comes complete with a Sytrama 101 GL robot, enabling automation of the injection process. Clamping Unit Clamping force: 9000 kN Platen dimensions (H × W): 1570 × 1560 mm Tie bar spacing (H × W): 1010 × 1010 mm Min. / Max. mould height: 300 – 1190 mm Max. opening stroke: 2290 mm Locating ring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 98 mm Injection volume: 4010 cm³ Shot weight (PS): 3690 g Injection pressure: 1650 bar Max. injection speed: 400 mm/s Additional equipment Pneumatic valves – 4 pcs. Core pulls – 1 fixed / 1 moving Robot included: Sytrama 101 GL The machine is available for inspection and testing under power. Photos and demonstration videos available upon request. Loading and transport can be arranged.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Stork & Herrmann Model: MA 300D Crodpozgg U Eofx Ailoh Year of manufacture: 2022, as new 2 x 300-liter containers with runners (for loading) 2 rotation directions (freely selectable left/right rotation of the container) Container mounted on plastic wheels, tiltable by approx. 25° Machine stands on legs for easier cleaning underneath Drain screw in the container Complete stainless steel construction Mechanical adjustment of the mixing arm height Shipping possible

Condition: excellent (used), Year of construction: 2011, Stork S+ 9000-12550 injection molding machine Control: CDS700 Year of production: 2011 Closing unit: Closing force [kN]: 9000 Clamping plate dimensions (hxv) [mm]: 1570 x 1560 Clearance between columns (hxv) [mm]: 1010 x 1010 Min./max. mold height [mm]: 300…1190 Maximum opening width [mm]: 2290 Centring ring diameter [mm]: 250 Csdpfxowrna Aj Ailsrh Maximum ejector stroke [mm]: 300 Injection unit: Screw diameter [mm]: 115 Injection volume [cm3]: 6232 PS injection weight [g]: 5733 Injection pressure [bar]: 1740 Maximum injection speed: 300 Additional equipment: Pneumatic valve - 6 pcs. Core - 1 pc.

Condition: used, Year of construction: 2018, 3 x injection moulding machines Stork Machine type Commissioning Age in months 4400-2150 19.12.2002 278 4400-2150 28.11.2012 159 6600-5650 01.11.2011 171 Crjdpfxsx Uymao Ailoh

Condition: used, Year of construction: 1985, year of last overhaul: 2008, CLEARANCE SALE 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE STORK RD4 Textile Rotary Printing Machine – 8 / 12 Colors – 1850 mm – Used / Overhauled Make: Stork Model/Type: RD-IV Number of colors: 8 ( possible 12) Working width: 1850 mm Year of manufacture: 1985 Condition: Renewed / major overhaul completed in 2008, later preserved Heating system: Steam Included equipment: Fluff remover: Stork SU-II / 1850 Dryer: 6-chamber dryer Crodsy A S Ryopfx Ailjh Suitable for textile rotary printing operations requiring reliable multi-color production. MACHINE IS REFURBISHED , PROFESSIONALLY MARKED, DISMANTLED, STORED IN MILL-FLOOR - VIDEO AVAILABLE For more information, technical details, photos, or video , please get in touch. Shipping possible immediately.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: X 44733, Plastic injection moulding machine | Stork S+ 4400-2150 Crsdpfexwva Esx Ailsh - Clamping force: 4400 kN - Opening stroke: 720 mm - Tie bar distance: 730 x 730 mm - Mould height: 500–1050 mm - Screw diameter: 62 mm - Shot volume: 951 cm³ - E-Screwdrive An inspection can be arranged at any time by appointment.

Condition: excellent (used), functionality: fully functional, Stork | Battering Machine / Coating Machine Manufacturer: Stork Device Type: Battering Machine / Coating Machine Mesh belt width: 600 mm Belt material: Stainless steel Overall dimensions: 3000 × 1100 × 1730 mm Construction: Stainless steel (acid-resistant) This industrial coating machine from Stork is designed for the automatic and uniform application of liquid batters (e.g., pancake batter, tempura, slurry) onto food products. The device is a key component in production lines that manufacture products such as nuggets, cutlets, fish sticks, schnitzels, and various types of snacks and molded products. Thanks to its universal mesh belt with a working width of up to 600 mm, the machine ensures high throughput and works perfectly with industrial formers, dry battering machines, and frying tunnels (fryers). Key features: - Efficient coating system: A special design allows for precise coverage of the product with liquid batter from all sides (from below through immersion, from above through a liquid curtain), guaranteeing perfect consistency and excellent adhesion for subsequent dry battering. Crsdpfx Aiey Uav Uoljh - System for removing excess liquid: The machine is equipped with a mechanism (e.g., air blast or vibration system) that effectively removes excess batter from the product, preventing drips and saving raw materials. - Parameter adjustment: The ability to adjust the belt speed makes it easy to synchronize the machine with the rest of the production line.

Year of construction: 2015, condition: ready for operation (used), 1) Eccentric screw pump Johstadt AFJ 70.1 S, year of manufacture: 2011. 2) Eccentric screw pump Johstadt FJ 70.1 S, year of manufacture: 2015. 3) Eccentric screw pump Stöber/HEW/Netzsch DC30-2061-200-U/EEXF100L/U/NE40B, year of manufacture: 1989. 4) Centrifugal pump Stork CN32-200G1S3L1, year of manufacture: 1997. 5) Centrifugal pump Siemens&Hinsch m.b.H/Loher&Söhne AKHK6101/eA132 MA-U, year of manufacture: 1970. 6) Centrifugal pump with electric motor EMK/SPX EC2-HS160M1-2/CC40-200 R6S2L2. 7) Electric motor Siemens 1LA2 130-2CA60, year of manufacture: 1997. 8) Electric motor VEM. VEM electric motor. 9) Electric motor with gearbox Nord SK 132 S/4-2 TF, SK 33-132S/4-2 TF, year of manufacture: 2011. 10) Blower Gebhardt Ventilatoren KEM 61-0200-4 X-14-11. 11) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 Dex 80L/4K, year of manufacture: 2015. 12) Side channel pump SERO/VEM SVM 111 K,V,60-2,32 kPER 80G4 FDS, year of manufacture: 2013. 13) Electric motor with gearbox Getriebebau Nord SK 132 S/4 TF, SK 472-132 S/4 TF. 14) Electric motor with gearbox Getriebebau Nord SK 25-100 L/4 ED, SK 100 L/4 ED. 15) Electric motor with gearbox Getriebebau Nord SK 100 L/40, SK 25-100 L/40. 16) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 DCEx 80L/Ur, year of manufacture: 2015. 17) Centrifugal fan Hürner-Funken GmbH/MM Antriebstechnik HF R160-17D/FY 71 A-4 T, year of manufacture: 2001. 18) Centrifugal fan Konz Lufttechnik/ABB Motors MPR 351/M2V AD 80 B-2, year of manufacture: 2006. 19) Axial fan Helios HRFD 35/4 TK. 20) Centrifugal pump Bedu CRT 70/3, year of manufacture: 2015. 21) Electric motor with gearbox and magnetic field coupling Nord Drivesystems/Varisco SK 33-132MP/4 TF, V 60-2 STGTRM+X+Y, year of manufacture: 2017. 22) Pneumatic agitator PTM. 23) Pneumatic agitator. 24) Pneumatic agitator WP ARO MRV050A/6150051-14-P. Including various stators for progressive cavity pumps. Documentation available. On-site inspection is possible. Individual sale possible. Cjdpfxov Extbe Ailjrh

Condition: repair required (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X27054, clamping force: 2,000 kN, screw diameter: 62 mm, Used Stork IMM 2000-1450 injection molding machine. Crjdpfewhlddjx Ailjh The machine still needs to be tested and repaired.

Condition: used, Year of construction: 2007, Manufacturer: Stork Model: TEM630 Year: 2007 Condition: Used Serial number: 10063138 Credpjzfh Hmjfx Ailjh Stock number: 2196P Bandwidth: 630 mm Power: 3 x 400V, 50Hz, 2kW Dimensions: 2100 x 1250 x 1500 mm Weight: 300 kg