Used hydraulic presses double column / Four column presses for sale (310)

Condition: as good as new (ex-display), Year of construction: 2022, Press design double column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 4000 kN Free ripping force max. 400 kN Pressure build-up time Closed die steel to steel Max. 4 sec. Dimensions 3,800 mm long and 4,475 mm wide Max. Opening width 800 mm Stroke 800 mm Table height above floor 1100 mm Height above floor (headroom) approx. 4300 mm Hall height min. 5500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of press without operating materials and table plate approx. 28 t Press table Table size 1500x1500 mm Speeds Fast closing with 100 mm sec. Pressing speed 8 - 3 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders/driving cylinders 1 pc. Operating pressure max. 300 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 3 bar Main pump BOSCHREXROTH axial piston pump approx. 145 L/min Oil volume approx. HLP 46 MW 1000 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Auxiliary pump BOSCHREXROTH, gear pump 10 L/min Pressure stabilization for up to 300 sec. Electrical system Main supply 400 V AC Gjdsph Uk Nopfx Ag Deuk Control voltage 24 V DC Frequency 50 Hz Connection hydraulics main motor 40 kW Sliding table press with 400 T capacity, Closing speed up to 100 mm/ ( adjustable via touch screen ) Opening speed up to 100 mm/sec ( adjustable via touch screen ) Starting press speed 10 mm/sec ( adjustable via touch screen ) table top size 1500x1500mm ram size approx. 1600x1500mm Oil temperature monitoring 55 degree warning, 60 degree shutdown Automatic lubrication ( adjustable via touch screen ) Free positioning of the ram ( adjustable via touch screen ) SICK/PILZ light barriers 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram protection Circuit oil cooling ( adjustable via touch screen ) Ejector in table, 20 T press force, 350mm travel Ejector moves outwards with the table Table plate milled flat, with DIN 22 T grooves Pressure adjustment from 60 T to 400 T ( adjustable via touch screen ) Travel limitation either by pressure or position Set-up mode, single stroke and cycle sequence ( adjustable via touch screen ) Swiveling control panel on the cabinet Two-hand operation, with opening button, manual/single stroke/cycle switchover button Installation, commissioning, instruction against separate charge The control is supplied by SIEMENS. ( S 7 1200 ) Also the touch screen monitor with 9 inch. The remote maintenance unit SECOMEA -Ethernet is included in the delivery. The side of the press has two 1000 mm high and 800 mm wide windows with double doors. (sliding table press, hydraulic press, hydraulic press, double column press)

Condition: used, Year of construction: 1986, Pressure total: 500 ton Gsdpfx Asuqdqlsg Djuk Stroke: 1100 mm Daylight: 1500 mm Table surface area : 2000 x 1250 mm Slide area: 2000 x 1250 mm Die cushion capacity in table: 160 ton Die cushion stroke: 300 mm Approach speed: 650 mm / sec Required power: 55 kW Weight of machine approx.: 50 ton Standard configuration The press was completely overhauled mechanically, hydraulically and electrically in 2008.

Condition: used, Year of construction: 2011, operating hours: 1,000 h, functionality: fully functional, total height: 4,200 mm, table height: 700 mm, total width: 3,000 mm, total length: 2,000 mm, pressing force: 1,200 t, table width: 3,000 mm, table length: 2,000 mm, overall weight: 60,000 kg, ram plate width: 800 mm, ram plate length: 600 mm, distance table to ram: 700 mm, type of input current: three-phase, distance between stands: 2,200 mm, stroke length: 600 mm, oil tank capacity: 700 l, control cabinet width: 400 mm, input voltage: 380 V, control cabinet height: 2,000 mm, Equipment: safety light barrier, H-frame, 4 columns, daylight 700 mm, stroke 600 mm, distance between columns 2200 mm x 1260 mm, dimensions (LxWxH) 3000x2000x4200 mm, 380V-15kW, weight 60,000 kg Gjdpfxsxn Rvcs Ag Djuk

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Press cylinder, stroke length: 400mm Press table with T-slot Gjdpfeg Rn Efsx Ag Deuk 1,500x900mm above 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. All statements without guarantee. Without transport costs.

Condition: new, Year of construction: 2023, functionality: fully functional, - Model: T40756W1-Xa5C/F14F-GO16B-VPPX-XS15/523-SO28JR/N-F10 - Type: Hydraulic Power Unit (compact unit for industrial hydraulic applications) - All technical specifications: - Material: Steel tank and frame for durability; standard hydraulic components - Voltage: 230/400 V AC (configurable) - Phases: 3-phase - Frequency: 50/60 Hz - Motor Power: 0.75 kW - Pump Displacement: 1.6 cc/rev - Flow Rate: 2.208 liters/min (at 1380 rpm) - Relief Pressure: 160 bar - Tank Capacity: 15 L - Medium: Hydraulic oil (mineral base, HLP/DIN 51524 recommended) - Filtration: Standard inline filter (≥10 µm) - Operating Temperature Range: -20°C to +80°C (-4°F to +176°F) - Protection Rating: IP54 (motor); suitable for industrial environments - Standards: ISO 4413; CE marked - Certification: CE; RoHS compliant - Features: Compact design for space-saving; includes motor, pump, tank, and relief valve; suitable for actuators and machinery - Dimensions: 360 mm length x 240 mm width x 550 mm height - Weight: 0.15 kg (approximate, based on compact unit) - Country of origin: Denmark - HS code: 8412.21 (hydraulic power engines and motors) LARGE STOCK AVAILABLE Guodpfx Asuadbuog Djk

Condition: ready for operation (used), total height: 2,140 mm, total width: 865 mm, total length: 1,665 mm, passage width: 1,100 mm, power: 2.2 kW (2.99 HP), empty load weight: 970 kg, load capacity: 100,000 kg, Arlo 100 T / 1000 Vario Gsdpfx Asxc Rbbog Douk Max ram adjustment: 380 mm Drawningspeed: 7,54 mm/sec Workingspeed: 2,47 mm/sec Returningspeed: 9,06 mm/sec

Condition: refurbished (used), Year of construction: 2020, pressure:500 t passage width:1100 mm stroke:600 mm weight of the machine ca.:ca. 22,8 t Table area:1100 x 800 mm ram surface:1100 x 800 mm Daylight Opening:800 mm Hydraulic:300 bar closing speed:60-200 mm/sec pressing speed:0 - 9,5 mm/sec Godpfx Aoffamveg Djuk opening speed:28-200 mm/sec Table height above ground level:900 mm height over floor:5100 mm workpiece weight max.:2000 kg workpiece weight top:1000 kg halls height:min. 6500 mm Number of pressing cylinders:1 St. number of driving cylinders:2 St. :ca. 270 Lt./min. Oil Tank Capacity:600 l main drive:75 kW Control technology from Siemens:S 7 Safety control:PILZ Multi

Condition: used, Year of construction: 1996, machine/vehicle number: 14.194, Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Gedpsu Saaaofx Ag Djuk Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Condition: new, neu ca. 4 Monate ab Auftragse Italien 172500 € 3260.25 € 300 to 500 mm 1250x1000 mm 600 mm 22 mm/s 2 mm/s 7.5 kW 1750 mm 1500 mm 2800 mm Gjdpfxjwir Acs Ag Dsuk 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 700 t, overall weight: 50,000 kg, stroke length: 1,500 mm, Equipment: documentation/manual, Press used for composites, until now it worked in Belgium. In July 2015 the press underwent a thorough modernization, the year of production of the device is 1990, however the modernization was very extensive. The press was used very little, it worked in a research institute. Due to the power cut, I could not check the mileage, but the device looks like new, there are no signs of wear of the working elements. Godpfxewtbc To Ag Djuk The press is currently in Poland, 63-300 Pleszew, Poland. Pressure 700T. Dimensions of the upper foot 180x240. Foot stroke approx. 150cm. The press was used to develop the famous carbon space frame AUDI R8, it worked in a research and development institute near Brussels. Sometimes this device was also used for commercial production. The press looks practically like new. I have full modernization and technical documentation. The device was dismantled by me, in the sale price I add free assembly at the customer's, I will restore the device to the condition it was in before I dismantled the press. The buyer must provide a large forklift (approx. 44T), compressed air, and accommodation for 3 people for 14 days. I offer and pay for a team to assemble the device on site throughout Europe. It is very likely that the device will have to be configured for operation at the new buyer's, this task can be performed for an additional fee by a company from the Netherlands, which carried out a thorough modernization of the device in 2015, the estimated cost of such an operation depends on the buyer's requirements. The transport costs will be very attractive, because I have a friendly company that has very attractive delivery terms for me. The weight of the entire device is approximately 50T.

Condition: good (used), functionality: fully functional, pressing force: 1,500 t, table width: 2,440 mm, table length: 4,572 mm, die cushion stroke: 360 mm, clearance between the columns: 4,800 mm, stroke length: 1,320 mm, Equipment: documentation/manual, Manufacturer Muller Model BZE 1500 Year 1980 Excellent condition Stock number cod.0313 Thrust: 1500 ton. Thrust points: no. 6 Slide stroke: 1320 Maximum sled opening:m 2,620 mm. Maximum slide closure:m 1,300 mm. Slide size: no. 6 Gedpfx Ajq Hdz Uog Djuk Table size: 4,572 x 2,440 mm. Stroke premiums bottom plate: 360 mm. Useful front passage: 4,800 mm. Lateral passage in the shoulder: 2,600 mm. Pull-out carriage with possibility in the upright Location :Italy

Condition: good (used), pressure 250 t passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm Guodpexcblwsfx Ag Dok total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 65056, pressing force: 5,000 t, table width: 4,520 mm, table length: 2,150 mm, overall weight: 319,000 kg, stroke length: 900 mm, Equipment: safety light barrier, Pressure build-up time: 3.6 s Pressure relief time: 1.5 s 6-axis industrial robot, manuf. ABB, type IRB6640 M2004 Control cabinet array, 12-door, SN 6/5056 Operator panel, water-based hydraulic unit Guodpfx Aexb Tplsg Dok Tool change device Mesh safety enclosure with light curtains

Condition: used, Year of construction: 2002, machine/vehicle number: 10857, Pressure total: 315 ton Stroke: 1100 mm Daylight: 2200 mm Table surface area : 2500 x 1000 mm Slide area: 2500 x 1000 mm Die weight at the ram max.: 6000 kg Approach speed: 600 mm / sec Working speed: 32 - 230 mm / sec Return speed: 600 mm / sec Required power: 158 kW Weight of machine approx.: 44 ton Height over floor approx.: 6175 mm Gujdpfxevmfzbs Ag Dek Automation

Condition: new, neu ca. 4 Monate ab Auftragse Italien 132500 € 2504.25 € 200 to 500 mm 1250x1000 mm 600 mm 25 mm/s 3,5 mm/s 7.5 kW 1550 mm 1300 mm 2700 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic Gjdpfswiq Abex Ag Djuk • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: ready for operation (used), passage width: 780 mm, power: 30 kW (40.79 HP), empty load weight: 11,000 kg, load capacity: 450,000 kg, Doorgang tussen de staanders: 780 mm Maximale ramverstelling: 800 mm Afstand tussen tafel en ram: 1200 mm Tafeloppervlak: 1200 x 780 mm Elektromotor: 30 kW Gewicht: 11 ton 4-koloms hydraulische pers hoge sluitsnelheid ideaal voor composietprojecten de pers kan langdurig onder druk staan één enkelwerkende hydraulische hoofdzuiger twee kleinere zuigers om de stempel terug te trekken verwarming kan optioneel gebruikt worden (aan/uit) Max ram adjustment: 800 mm Distance between table -- ram: 1200 mm Table area: 1200 x 780 mm Godpfx Aexb E E Eeg Deuk

Year of construction: 1993, condition: used, TYPE : DEA 400/2000 Type YEAR : n.d. Year MAXIMUM SLEDGEHAMMER PRESSURE : TON. 400 Ram capacity SLIDING STROKE : mm. 1,100 Slide strok MAX VERTICAL LIGHT : mm. 1,600 Max shut height TABLE DIMENSIONS : mm. 2,000 x 1,600 Table size RAPID SPEED : mm/sec 650 Fast stroke TABLE PRESS CAPACITY : TON. 160 Cushion capacity PRE-MILER stroke : mm. 400 Gjdpfx Agjihf R Ue Dsuk Cushion stroke HEIGHT ABOVE GROUND : mm. 5,800 Ground up to floor FRONT LIGHT : mm. 3,400 Distance btw uprights LATERAL LIGHT : mm.1,600 Lateral window

Condition: used, Manufacturer: EXNER Type: EX 20 Maximum pressing force: 20 t Gusdpfx Agsxbf Ndo Djk Table size: 480 x 350 mm Maximum tool height: 230 mm

Condition: ready for operation (used), Year of construction: 1991, operating hours: 20,242 h, functionality: fully functional, machine/vehicle number: 6538, pressing force: 163 t, overall weight: 25,000 kg, retraction force: 22 t, stroke length: 500 mm, actuation type: hydraulic, TECHNICAL DETAILS Ram Pressing force: 1,600 kN Return force: 220 kN Stroke: 500 mm Drive power: 37 kW Drawing Device Drawing force: 400 kN Stroke: 100 mm Ejector in Ram Ejector force: 50 kN Stroke: 50 mm MACHINE DETAILS Weight: 25,000 kg Electrical Data Pump Unit Ram + Drawing Cushion Rated power: 37 kW Rated current: 72/66 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Pump Unit Control Circuit + Ejector Rated power: 7.5/15.5 kW Rated current: 15.5/26.5 A Voltage: 660/380 V Frequency: 50 Hz Protection class: IP 54 Cooling-Filter Circuit Rated power: 2.2 kW Rated current: 5 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Oil Cooler Rated power: 0.37 kW Rated current: 1.2 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Tool Clamping Rated power: 0.55 kW Rated current: 2.6 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Stop Spindle Rated power: 0.75 kW Rated current: 2.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Guedpfx Aexgt Tzsg Dek Oil Circulation Lubrication Rated power: 0.3 kW Rated current: 1.3 A Voltage: 380/220 V Frequency: 50 Hz Protection class: IP 54 Operating hours: 20,242 h EQUIPMENT Decoiler (Year: 1999) Straightening machine (Year: 1999) Feed unit (Year: 2004) Tool breakage monitoring system Note: The seller strongly recommends a prior inspection of the machine, as the press cannot be removed from the hall in its assembled condition. If required, the seller can possibly arrange a specialized company for relocating the machine.

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton Standard configuration with hydraulic tool clamps on the ram Gsdpfx Agouqdi Uo Djuk

Condition: new, neu ca. 4 Monate ab Auftragse Italien 104000 € 1965.6 € 125 to 500 mm 1200x700 mm 600 mm 115 mm/s 7 mm/s 70 mm/s 15 kW 2550 mm 1500 mm 2600 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment Guodpfxowiqxpe Ag Dok pressure adjustment

Condition: new, Year of construction: 2025, functionality: fully functional, The P50MR motorized hydraulic press guarantees high performance and maximum execution precision thanks to the robust structure entirely cut by laser without welding in the points of greatest stress. They are equipped with a 400 [V] 50-60 [Hz] submersible motor control unit, a fast approach and return pump calibrated to 20 [bar] plus an adjustable pressure pump with handwheel to obtain the required power. They are also equipped with a pressure relief valve with mechanical block to prevent overpressure and the pressure gauge (standard) allows to calibrate with extreme precision the power delivered. Power Ton 50 Inside light shoulders mm 800 Approach speed mm/min 1800 Working speed mm/min 350 Rapid flow rate l/min 26 Flow rate in slow l/min 5 Cylinder stroke mm 300 Cylinder bore mm 135 Stem diameter mm 70 Shank diameter mm M30 Tank capacity 50 litres Max. pressure bar 350 Voltage V400 Frequency Hz 50-60 Engine power kW 3 Max. current consumption A 5.5 Weight kg 500 Dimensions 1550 x 800 x 1965 (h) Gsdpfsfvhqgjx Ag Deuk

Condition: like new (used), Year of construction: 2008, YEAR : 2008 Year MAXIMUM PRESSURE OF THE RAM : Ton. 2.000 Ram capacity SLIDE STROKE : mm. 1500 Slide strok TABLE DIMENSIONS : mm. 5000 x 2380 Table size Gusdpjvm Eixsfx Ag Dek PRESSION OF THE BLANKHOLDER UPPER : Ton.300 Blankholder STROKE OF THE BLANKHOLDER SLIDE : mm. 200 Cushion stroke ram RAPID SPEED : mm/sec 220 Fast stroke PRESSION OF THE BLANKHOLDER CAPACITY : Ton. 600 Cushion capacity STROKE OF THE BLANKHOLDER SLIDE : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 9,145 Ground up to floor FRONT LIGHT: 5000 mm Distance btw uprights TOTAL WEIGHT: KG. n.d

Condition: used, Year of construction: 2006, machine/vehicle number: 18282, Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Gusdpfouqd Nujx Ag Djk Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Condition: used, Year of construction: 2006, machine/vehicle number: 18282, Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l Gsdsuqd S Aspfx Ag Djuk