Double column press / Straight side press

AP&T ZM 3150-25/10

Condition: excellent (used), Year of construction: 1992, Shaft diameter: 40 mm Bending capacity: Flat bar edgewise at 500 mm Ø: 60 x 10 mm Flat bar flatwise at 400 mm Ø: 100 x 15 mm Square bar at 500 mm Ø: 35 mm Fpedpox Anpvofx Aalog Angle iron, leg outwards at 450 mm Ø: 50 x 50 x 6 mm Angle iron, leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-section, T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm Electrical connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 480 kg

Year of construction: 1998, condition: like new (used), 65 Watt YAG laser Fodpsd Dhw Njfx Aalepg

Condition: used, Laser ACSYS Lasertechnik GmbH PIRANHA II Multi FL20s Fpedeu E U Tnopfx Aaljg

Year of construction: 1965, condition: used, pressure 150 t throat 550 mm stroke 10 - 140 mm table surface area 1180 x 980 mm no. of strokes 40 Hub/min dayligth 500 mm Fpodpfjcubatjx Aalsg ram surface 1040 x 800 mm ram adjustment 70 - 150 mm tool shank hole (depth x diameter) 435 x 55 mm required power 15 kW weight of the machine ca. 12 t dimensions of the machine ca. 3 x 1,7 x 3 m - with additional brake - slide weight compensation - motorized slide adjustment - central grease lubrication (manual) - table mounting plate - safe for manual inlay work

Condition: good (used), Year of construction: 2014, operating hours: 8,035 h, functionality: fully functional, machine/vehicle number: MH0017-000100, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: fanuc, controller model: 31i, operating hours of spindle: 6,000 h, New Doosan horizontal machining center type NHP 8000 with Fanuc control unit type 31i Included equipment and options: Pallet centering system 800*800 Coolant supply with hand gun High-pressure coolant 70 bar, 7.5 kW with cyclonic filtration Automatic tool changer Tool load management Chip conveyor Renishaw RMP60 workpiece probe Fpedewu Rgqspfx Aaljg TS27R tool probe

Condition: used, Year of construction: 2002, cutting diameter / mm saw band length / mm cutting width / mm KASTO tec AC5 automatic band saw Sawing capacity: 23kW Machine weight: 5.9t Year of manufacture: 2002 Cutting ranges in mm approx.: Round: 530mm Square: 530x530mm Flat: 530x630mm Smallest dimension to be sawn: 10x10 mm Minimum length to be sawn: 6 mm Minimum residual length, single cut: 10 mm Minimum residual length, automatic mode: 35 mm Automatic material feed, single, max. (standard): 600 mm Automatic material feed single max. (optional): 1500/3000 mm Fpedjxrg E Iopfx Aalsg Multiple material feed: 9999 mm Machine roller conveyor length: 1568 mm Max. piece weight: 2275 kg Cutting speed: 12-120 m/min (infinitely variable) Cutting feed: continuously adjustable Material feed: with ball screw Automatic feed: with horizontal clamping device Material clamping: hydraulic, continuously adjustable Clamping force Machine clamping device: 200-1000 daN Feed clamping device: 200-2000 daN Saw blade clamping: hydraulic, factory-set Saw blade cleaning: by easily replaceable double brush, driven by a hydraulic motor. Coolant tank volume: approx. 185 l Pump capacity: approx. 25 litres/min On request, we can offer you the 4 immediately available saw blades at an additional cost.

Year of construction: 1993, condition: used, TYPE : DEA 400/2000 Type YEAR : n.d. Fsdpfx Aajihf R Uelepg Year MAXIMUM SLEDGEHAMMER PRESSURE : TON. 400 Ram capacity SLIDING STROKE : mm. 1,100 Slide strok MAX VERTICAL LIGHT : mm. 1,600 Max shut height TABLE DIMENSIONS : mm. 2,000 x 1,600 Table size RAPID SPEED : mm/sec 650 Fast stroke TABLE PRESS CAPACITY : TON. 160 Cushion capacity PRE-MILER stroke : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 5,800 Ground up to floor FRONT LIGHT : mm. 3,400 Distance btw uprights LATERAL LIGHT : mm.1,600 Lateral window

Condition: new, The Durma 5-axis fiber laser cutting system will be your best partner for manufacturing automotive and other high-precision and complex 3D parts. The system offers 25% more processing area than machines with the same concept. For impeccable cutting performance, the powerful machine body and rotary table will give you the best quality. With the easy use of the fixture, you can save time. No maintenance and service is required thanks to components from well-known manufacturers and high quality materials. High quality 3D cutting can be achieved. With this technology, you have less energy consumption and can increase your business profit. The machine impresses with its speed, reliability and design. HD-FA Technical Data Available in 2,3 and 4 kW X axis: 3,000 mm Y axis: 1.500 mm Z axis: 650 mm B axis: ±135° C axis: ±360°xn Maximum vector speed: 173 m/min. Maximum vector acceleration: 1.73 G Tolerance positioning: ±0.08 mm Repeatability: ±0.08 mm MACHINE DIMENSIONS Machine size: 6168 mm x 3936 mm h= 3700 mm working area: 9.000 mm x 10.000 mm (safe area) Distance of the turntable door: 4.000 mm machine weight: 16.000 kg Cutting head: Type: 3D Focus type: Automatic Fpsdpfog Adknox Aaljg Control unit: CNC Siemens Sinumerik 840D SK Screen: 19 inch touch screen Filter Capacity: 2.500 m³/h - 4 kW

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t Fpsdpfxevuuckj Aalsg required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) Fpjdpfx Aaotv H Ucsljg • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.