Used Electrical Drawing for sale (31,025)

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,798 h, load capacity: 4,000 kg, lifting height: 4,450 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: other, construction height: 3,150 mm, battery capacity: 870 Ah, remaining battery capacity: 82 %, battery voltage: 80 V, DGUV certified until: 07/2027, fork length: 2,400 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 electric forklift with the following specifications: Lifting capacity: 4,000 kg Lifting height: 4,450 mm Overall height: 3,150 mm Year of manufacture: 2010 Operating hours: 8,798 Cjdpfxjzivgce Ailsgw STILL 4.0-ton electric forklift with full cabin and heating, battery at 82%, good tires (new rear tires), telescopic mast for clear visibility, side shift, 4th valve, lighting compliant with StVZO (German Road Traffic Regulations), fork length 2,400 mm (other fork lengths available upon request), charger. Additional attachments such as fork positioners, rotating devices, etc., available upon request. Price ex works, including 1,000 hours of service according to STILL manufacturer's specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive are available by appointment. Sale is exclusively to commercial enterprises; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively with our own ramp-equipped low-bed trailer (transport costs upon request). You can find more information about us and other offers on our newly designed website!

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,856 h, load capacity: 5,000 kg, lifting height: 3,450 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: other, construction height: 2,550 mm, battery capacity: 930 Ah, remaining battery capacity: 84 %, battery voltage: 80 V, DGUV certified until: 07/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-50 electric forklift with the following specifications: * Lifting capacity: 5,000 kg * Lifting height: 3,450 mm * Overall height: 2,550 mm * Year of manufacture: 2018 * Operating hours: 7,856 Still 5.0-ton electric forklift, very good battery, good tires (rear tires new), telescopic mast with clear view, side shifter, fork positioner, lighting compliant with StVZO regulations, fork length 1,200 mm, charger Price ex works, including 1,000 hours of service according to Still manufacturer's specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive are available by appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors, and typos. We can deliver your new forklift cost-effectively using our own ramp-type low-bed trailer (transport costs on request). Cedpfx Aozivfxeilsgw Further information and offers can be found on our newly designed website!

Condition: excellent (used), For sale: Constantin Hang 103 LOK die-cutting machine, a product from a renowned German manufacturer. This device is designed for the precise die-cutting of paper, cardboard, leather, felt, rubber, and other soft materials. The machine is equipped with an electric drive, foot pedal control, and a robust work table with a material guide, ensuring comfortable and precise operation. Thanks to its robust construction, the device is characterized by high durability and reliability. Technical specifications: Manufacturer: Constantin Hang Maschinenfabrik Model: 103 LOK Machine number (Serial no.): 9578 Type: die-cutting machine Drive: electric Control: foot pedal Motor: Georgii KRD 328 Power supply: 220/380 V Cedpeziqq Nsfx Ailjgw Motor power: 240 W Frequency: 50 Hz Motor speed: 680 rpm Work table with guide Robust steel construction Condition: Used. Functional. Shows normal signs of wear and tear due to age and use. Visual condition consistent with the photos.

Condition: excellent (used), For sale is an ABUS wall-mounted jib crane equipped with an HADEF electric chain hoist, Type 63/78EF. This set is designed for lifting and moving loads in workshops, warehouses, production halls, and assembly stations. The robust steel construction from ABUS ensures high strength and stability during operation. The crane is equipped with an HADEF electric chain hoist controlled by a pendant control. The design is suitable for mounting on a wall or steel column. Technical data: Crane manufacturer: ABUS Kransysteme GmbH Hoist manufacturer: HADEF Hoist type: 63/78EF Crane lifting capacity: 500 kg Hoist lifting capacity: 250 kg Cedpfx Aioziqnhjlegw Total jib length: 204 cm Hoist year of manufacture: 1987 Crane year of manufacture: 2002 Power supply: 220/380 V Frequency: 50 Hz Motor power: 0.3 kW Lifting speed: 5.0 m/min Protection class: IP44 Chain: 5 × 15 mm (DIN 5684-8) Pendant control CE marking Condition: Used. Functional. Shows normal signs of use in the form of scratches, paint chips, and dirt, as visible in the photos. Visual condition consistent with age and use.

Condition: excellent (used), For sale: Constantin Hang 162.01 electric riveting/eyeleting machine from a reputable German manufacturer. This machine is designed for making riveted joints and installing eyelets in paper, cardboard, leather, fabrics, tarpaulins, and other materials. Its robust construction and precise head ensure high accuracy and repeatability. Technical specifications: * Manufacturer: Constantin Hang Maschinenfabrik * Model: 162.01 * Serial number: 40 031 * Country of origin: Germany * Type: electric riveting/eyeleting machine * Control: foot pedal * Drive: electric * Large work table with guides * Stable construction * Working head marked: 24/4 × 6–8 * Working reach: approx. 620 mm Applications: * Installation of metal eyelets, * riveting of components, * production of binders and folders, * bookbinding, * leather goods, * textiles, * banners and tarpaulins (with appropriate tooling), * production of technical components. Condition: Codpfx Asziqg Doiljgw * Used. * Functional. * Shows normal signs of use, as visible in the photos. * Sold in the exact condition as shown in the photographs.

Condition: used, Year of construction: 1997, Pressure 500 t distance between columns 1550 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 900 mm Cgjdpfx Aioy Rutmjljw table surface area 1200 x 1300 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 150 mm die cushion area 950 x 950 mm table height over floor 1245 mm side window 1250 mm ram surface 1200 x 1300 mm speed down 750 mm/s speed up 780 mm/s working speed 105 mm/s oil volume 4000 l power requirement 263,0 kW weight 45,0 t Dimensions (WxDxH) 3,3 x 3,3 x 6,1 m height over floor 6,1 m YOM 1978 - overhaul 1997 with oil-hydraulic drive, hydraulic drawing cushion in table, pneumatic ejector in ram (0,5 t), cutting impact cushioning with depth stop (motoric adjustable), mechanical ram interlocking in TDC as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 1125 mm Cgsdpfx Aieyx Il Eolow stroke 250 mm distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1100 x 900 mm pressure of drawing cushion in table 63 t stroke of drawing cushion in table 100 mm die cushion area 700 x 400 mm table height over floor 960 mm side window 700 mm ram surface 1080 x 900 mm oil volume 1000 l power requirement 35,0 kW weight 23,0 t Dimensions (WxDxH) 2,5 x 2,3 x 4,5 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick), hydraulic drawing cushion in table, cutting impact cushioning No foundation pit necessary

Condition: used, Year of construction: 1980, pressure 400 t distance between columns 3250 mm distance table/ram, max. stroke up, adjustment up 1000 mm stroke 800 mm table surface area 3250 x 1400 mm table height over floor 1250 mm die cushion capacity 170 t die cushion stroke 200 mm die cushion area 1800 x 1000 mm distance between cutting impact cushioning 2610 mm side window 800 mm ram surface 3250 x 1400 mm return capacity 51 t speed down 300 mm/s speed up 300 mm/s working speed 16 - 33 mm/s quantity of oil 2900 l power requirement 100,0 kW weight 70,0 t Dimensions (WxDxH) 4,9 x 3,1 x 7,6 m with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic drawing cushion in table (controllable), hydraulic cutting impact cushioning with motoric adjustable depth stop, hydraulic ram interlocking, two-hand operation as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck Codpfx Aioyx Ik Ujljgw

Condition: used, Year of construction: 1993, Pressure 1500 t distance between columns 5050 mm stroke 1100 mm Distance table/ram, stroke up 2300 mm Table surface area 5000 x 2700 mm pressure of drawing cushion in table 320 t Die cushion stroke in table 300 mm Die cushion area in table 4300 x 1830 mm Die cushion pressure in ram 120 t Cgedpfxovuucqj Ailsw Die cushion stroke in ram 200 mm Die cushion area in ram 3410 x 1650 mm Ram surface 5000 x 2400 mm Speed down 360 mm/s Speed up 168 - 505 mm/s Working speed 19 - 86 mm/s Oil volume 10500 l Power capacity 450,0 kW Weight 400,0 t Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m Height above floor 8,21 m Height below floor 4,0 m year of manufacture 1983 - overhaul 1993 with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning / stroke limitation (adjustment of the spindle approx. 500 mm, max. dampening force approx. 750 t, dampening stroke max. approx. 30 mm), controllabel dependant on pressure/time and way as is where is, WITHOUT dismantling, WITHOUT loading

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 1650 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1250 mm die cushion capacity 80 t die cushion stroke 300 mm die cushion area 1300 x 900 mm table height over floor 800 mm ram surface 1600 x 1250 mm oil volume 2000 l power capacity 43,0 kW weight 25,0 t Dimensions (WxDxH) 2,9 x 2,3 x 5,8 m Cjdpfxjxwdrve Ailogw height beneath floor 0,85 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1991, pressure 200 t distance between columns 1100 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1100 mm table surface area 1000 x 1000 mm pressure of drawing cushion in table 63 t stroke of drawing cushion in table 250 mm die cushion area 800 x 750 mm table height over floor 800 mm ram surface 1000 x 1000 mm Speed down 400 mm/s speed up 250 mm/s working speed 22 - 56 mm/s power requirement 45,0 kW weight 24,0 t dimensions (WxDxH) 2,4 x 1,5 x 5,9 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ram interlocking, two-hand operation Codpfxevzxqro Ailegw

Condition: used, Year of construction: 2007, pressure 315 t distance between columns 1750 mm stroke 700 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1500 mm Codpjvuukbsfx Ailjgw pressure of drawing cushion in table 125 t stroke of drawing cushion in table 200 mm die cushion area 1200 x 1400 mm table height over floor 750 mm ram surface 1640 x 1500 mm power requirement 55,0 + 11,0 kW weight 29,5 t dimensions (WxDxH) 3,2 x 4,5 x 5,8 m Height above floor 5,1 m year of manufacture 1983 - 2007: modernization of electrical control (Siemens S 7) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact cushioning

Condition: used, Year of construction: 1989, pressure 100 t distance between columns 1060 mm stroke 700 mm distance table/ram, max. stroke up, adjustment up 1250 mm table surface area 1000 x 700 mm pressure of drawing cushion in table 40 t stroke of drawing cushion in table 200 mm die cushion area Ø 250 mm table height over floor 950 mm side window 580 x 750 mm ram surface 1000 x 700 mm oil volume 700 l Cgedpfjvuk Naox Ailow power requirement 47,0 kW weight 13,0 t Dimensions (WxDxH) 2,2 x 1,8 x 5,0 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ejector in ram, mechanical depth stop (motoric adjustable), ram interlocking (SITEMA)

Condition: used, Year of construction: 1993, pressure 500 t distance between columns 2240 mm stroke 1180 mm distance table/ram, max. stroke up, adjustment up 1800 mm table surface area 2050 x 1800 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 380 mm drawing cushion surface in table 1800 x 1200 mm pressure of drawing cushion in ram 122 t stroke of drawing cushion in ram 200 mm drawing cushion area in ram 1800 x 1200 mm Cedpfxjvuk I Ns Ailogw ram surface 2215 x 1800 mm table height over floor 500 mm speed down 400 mm/s speed up 10 - 400 mm/s working speed 10 - 100 mm/s depth of the foundation 3,0 m power requirement 122 + 75 + 64,5 kW weight 110,0 t Dimensions (WxDxH) 3,6 x 2,2 x 8,5 m height over floor 6,8 m with oil-hydraulic drive, hydraulic drawing cushion in table and ram, cutting impact cushioning, ram interlocking Foundation depth approx. 3,0 m press is currently under revision with control Siemens S 7 / safety control Pilz

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 1660 mm stroke 400 mm Distance table/ram, stroke up 600 mm Table surface area 1600 x 1000 mm table height over floor 960 mm Cgedjvuuhmepfx Ailow Die cushion pressure in table 80 t Die cushion stroke in table 200 mm Die cushion area in table 950 x 650 mm Side window 720 mm Ram surface 1600 x 1000 mm Oil volume 1400 l Power capacity 57,0 kW Weight 30,0 t Dimensions (WxDxH) 3,0 x 2,9 x 4,4 m with oil-hydraulic drive, hydraulic drawing cushion in table

Condition: used, Year of construction: 2005, Pressure 600 t distance between columns 2600 mm stroke 900 mm Distance table/ram, max. stroke up, adjustment up 1600 mm Cjdpfxjvuuh Tj Ailegw Table surface area 2500 x 1730 mm pressure of drawing cushion in table 250 t Die cushion stroke in table 400 mm Die cushion area in table 2300 x 1300 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 160 mm Die cushion area in ram 1900 x 1300 mm Ram surface 2500 x 1730 mm Side window 1100 mm Oil volume 3500 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 9,6 m Height above floor 6,4 m year of manufacture 1974 - overhaul 2005: complete new electrical cabinet with control Siemens S7 and safety control Pilz with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1996, pressure 100 t distance between columns 1525 mm stroke 450 mm distance table/ram, max. stroke up, adjustment up 850 mm table surface area 1500 x 1150 mm pressure of drawing cushion in table 30 t stroke of drawing cushion in table 150 mm table height over floor 940 mm side window 480 mm ram surface 1500 x 1150 mm oil volume 1200 l weight 25,0 t dimensions (WxDxH) 4,2 x 1,75 x 5,1 m light guard Sick with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, mechanical depth stop No foundation pit necessary 2026 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Cgjdpovuufxsfx Ailew Video at seller's site before dismantling available

Condition: used, Year of construction: 1982, pressure 350 t distance between columns 1350 mm stroke 900 mm distance table/ram, max. stroke up, adjustment up 1300 mm table surface area 1300 x 1000 mm pressure of drawing cushion in table 100 t stroke of drawing cushion in table 380 mm die cushion area 350 x 285 mm capacity of ejector in ram 25 t ejector stroke in ram 200 mm Cgodpfxsvuk Iis Ailjw table height over floor 750 mm ram surface 1300 x 1000 mm speed down 500 mm/s speed up 160 - 470 mm/s working speed 16 - 44 mm/s drawing speed 57 - 160 mm/s return capacity 32 t oil volume 1700 l power requirement 91,0 kW Dimensions (WxDxH) 3,75 x 2,8 x 7,2 m height over floor 5,28 m with oil-hydraulic drive, light-guard (Sick), controllable dependant on pressure/time and way, hydraulic drawing cushion in table (controllabe), hydraulic ejector in ram, ram interlocking in TDC, speeds controllable, two-hand operation stored in partly dismantled condition

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Csdpfsvuuhgsx Ailegw Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2060 mm stroke 700 mm Distance table/ram, stroke up 1100 mm Table surface area 2000 x 1000 mm Die cushion pressure in table 125 t Die cushion stroke in table 200 mm die cushion area 1200 x 600 mm Table height above floor 750 mm table height over floor (if standing without pit) 1100 mm Side window 720 mm Ram surface 2000 x 1000 mm Oil volume 1800 l Power capacity 90,0 kW Weight 35,0 t Cgodsvuudzepfx Ailjw Dimensions (WxDxH) 3,6 x 2,75 x 5,65 m with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning (with motoric depth adjustment) No foundation pit necessary

Condition: used, Year of construction: 2010, pressure 315 t distance between columns 1800 mm stroke 400 mm Distance table/ram, max. stroke up, adjustment up 650 mm table surface area 1800 x 1000 mm table height over floor 900 mm die cushion pressure in table 80 t die cushion stroke in table 100 mm Die cushion area in table 1300 x 600 mm side window 600 mm ram surface 1800 x 1000 mm speed down 400 mm/s speed up 300 mm/s working speed 15 - 80 mm/s Cgedpfxevuubmj Ailow oil volume 1700 l power requirement 55,0 kW weight 27,5 t dimensions (WxDxH) 3,1 x 2,2 x 4,6 m year of manufacture 1980 - modernization 2010 with oil-hydraulic drive, hydraulic drawing cushion in table No foundation pit necessary

Condition: used, Year of construction: 1991, pressure 63 t throat 325 mm stroke 560 mm dayligth 700 mm table surface area 640 x 640 mm die cushion capacity 25 t die cushion stroke 200 mm die cushion area 450 x 450 mm table height over floor 800 mm ram surface 560 x 560 mm oil volume 450 l Codpfxovuuace Ailogw total power requirement 15,0 kW weight of the machine ca. 7,0 t required space 1,2 x 2,0 x 3,1 m year of manufacture 1971 - overhaul 1991 with oil-hydraulic drive, hydraulic drawing cushion in table, two-hand operation

Condition: used, Year of construction: 1990, pressure 500 t distance between columns 1220 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1600 x 1200 mm pressure of drawing cushion in table 320 t stroke of drawing cushion in table 150 mm drawing cushion surface in table 750 x 625 mm pressure of drawing cushion in ram 180 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 750 x 625 mm ram surface 1600 x 1200 mm table height over floor 800 mm speed down 665 mm/s speed up 530 mm/s working speed 34 - 100 mm/s quantity of oil 2000 l power requirement 180,0 kW weight 40,0 t Dimensions (WxDxH) 3,2 x 2,4 x 7,5 m Depth of foundation pit 4,1 m Height above floor 5,55 m YOM 1975 - Overhaul 1990 with oil-hydraulic drive, hydraulic drawing cushion in table and ram Cgodpfx Aiovut Tboljw

Condition: used, Year of construction: 1979, pressure 160 t Csdevut Ryjpfx Ailegw distance between columns 1620 mm stroke 600 mm Distance table/ram, stroke up 800 mm table surface area 1600 x 1100 mm table height over floor 750 mm die cushion pressure in table 63 t die cushion stroke in table 180 mm Die cushion area in table 1300 x 750 mm side window 600 mm ram surface 1600 x 1100 mm oil volume 1160 l power requirement 30,0 + 16,0 kW weight 23,6 t dimensions (WxDxH) 2,9 x 2,3 x 4,65 m Height above floor 4,26 m with oil-hydraulic drive, hydraulic drawing cushion in table No foundation pit necessary

Condition: good (used), Year of construction: 2011, operating hours: 8,239 h, load capacity: 3,000 kg, lifting height: 5,390 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, empty load weight: 5,700 kg, mileage: 8,239 km, TRIPLEX forklift, brand STILL Year of manufacture: 2011 Capacity: 3,000 kg Lifting height: 5,390 mm Equipped with a FREELIFT Equipped with a SIDESHIFT and FORK SPREADER Mast height: 2,500 mm Cjdpfxjzaaw Is Ailogw 8,239 hours on the meter Battery replaced in 2021, equipped with an external charger and automatic filling system Video to follow.