Used Hydraulic Straightening Press for sale (25,448)

Condition: good (used), Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine -Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor -Pressure force: 10 ton Pedpfx Aevgu Haomyspw -Pressure: max 100 bar -Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm -Transport dimensions: 1335/1220//H1470 mm -Weight: 807 kg

Condition: good (used), Hydraulic straightening press Manufacturer: G + K Year of manufacture: 1992 Max. pressing force: 130 t Table size (bottom): 800 x 500 mm with T-slots Table size (top): 800 x 500 mm with T-slots Installation dimension: 1000 mm System pressure: 250 bar Electric motor: 15 kW Weight: 3400 kg Operating voltage: 380 AC, 24 DC Control system renewed 5 years ago The machine is equipped with 2 tables, one at the bottom and one at the top, each measuring 800 x 500 mm. Ppodpfxezkg Ige Amyjw A throttle valve is installed on the hydraulic unit to adjust the pressure.

Condition: good (used), Year of construction: 2021, machine/vehicle number: H 21-3743, Offer 26175 Technical data: Ppjdezh Edbjpfx Amysw - max. pressing force up to 25 t - max. ram stroke 160 mm - installation height without straightening unit 675 mm - overhang to the center of the ram 250 mm - table size approx. 1300 x 300 mm - working speed, roughing approx. up to max. 30 mm/s - working speed, finishing approx. 100 mm/s - oil capacity approx. 150 liters - drive 400 V / 10 kW - space requirement approx. W 4900 x H 2400 x D 1500 mm - weight approx. 3000 kg - including: - straightening table extension 2030 + 1520 mm - traversing carriage with mounts on the straightening table - pointed die holder - roller die holder - straightening ram - pivoting feeler gauge with dial indicator

Condition: used, Machine not operational - control system not functioning Available at a special price Ppodpfx Amsdzqpteysw Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Ppodpjd Swtaefx Amysw Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: used, HYDRAULIC PRESS SMG Pedpetndu Ujfx Amyjpw PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Ppedpfscmat Usx Amysw Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Psdpfxeu Axfcs Amyepw Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. Ppedpfx Amszdaxyeyow After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 157090207, functionality: fully functional, pressing force: 180 t, stroke length: 325 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 180 t Max. hydraulic pressure: 600 bar Cylinder stroke: 325 mm Opening: 325 mm MACHINE DETAILS Control: Electronic control with operating panel/CNC Voltage: 400 V / 50 Hz Podpfxoznmb Io Amyspw Design: Industrial design EQUIPMENT Enclosed safety cabin Hydraulic press system Heating plate press Molding press

Condition: excellent (used), Year of construction: 2000, Manufacturer EMANUEL Model DEA 800 Year 2000 Condition Used Warehouse number Cod.0337 Power 800 tons Slide stroke 900 mm Approach speed mm/sec 400 mm Pedpfx Aowiidwjmyopw Working speed at 100% mm/sec 15 mm Working speed at 50% mm/sec 31 Slide return speed mm/sec 400 mm Max. vertical clearance 1,500 mm Mold holder table size 2,500 x 1,500 mm Blankholder table size 2,380 x 970 mm Blankholder cushion - total force (ton) 600 tons Lower blankholder stroke 450 mm.

Condition: used, Hydraulic workshop press, keyway milling press, groove milling press Hydraulic workshop press, custom-built, MaVo type 5t-20 Used for milling keyway grooves in through-holes. Pressing force: 5 tons (at 100 bar hydraulic pressure) Stand width: 770 mm Cylinder stroke: 220 mm Distance from threaded piston rod to table traverse: max. 900 mm Pressing speed, ram downwards: approx. 11.5 mm/sec. = 220 mm in 19 sec. Pressing speed, ram upwards: approx. 24.5 mm/sec. = 220 mm in 9 sec. Podpjwki Apsfx Amyspw Motor power: 5.5 kW Mains connection: 400 volts, 50 Hz - 2-hand control (one button for pump on, 1 button for downwards, 1 button for upwards) - Hydraulic pump HAWE, type K5/3 (can also deliver 400 bar, but the pump is very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm length - 2 support plates - Very stable steel construction made of 140 series double T-beams - Estimated load-bearing capacity of the steel construction: 40 tons or more - Can be moved with a pallet truck Space requirement L x W x H: 1200 x 930 x 2280 mm Weight: 485 kg

Condition: used, Year of construction: 1959, machine/vehicle number: 4501, hydraulic table press Pedpfx Aezp Nxremyepw

Condition: excellent (used), Year of construction: 1991, Distance between column:1870mm Hight under roof: 1400mm Table Length: 1600mm Length: 3400mm Width: 3400mm Ppodpfxewyuqke Amyjw Height: 3500mm Weight: 19000kg

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm Ppodjx Uru Nspfx Amyow weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: good (used), pressure 250 t passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m Pedjxcblwjpfx Amyspw

Condition: good (used), Year of construction: 1970, pressure 80 t passage width 350 mm stroke 600 mm table dimension - longitudinal 400 mm Pjdpfjvwgqrex Amyspw dimensions of the machine ca. 1400 x 1050 x 2350 m

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 8,120 mm, total height: 2,300 mm, Vertical Hydraulic Press FAMAD HSKG 6m – Number of loading zones: 3 Dimensions of a single loading zone: – Loading height: 1140 mm – Length of battens in one zone: 1530 mm – Maximum batten width: 150 mm – Maximum length of glued elements: 3120 mm – Installed power: 3 kW – Number of cylinders per zone: - 3 pcs 50x100 mm Pedpfeyuylnex Amyepw - 3 pcs 80x100 mm – External dimensions (L x W x H): 8120x1000x2300 mm – Machine weight: 4800 kg

Year of construction: 1970, condition: ready for operation (used), machine/vehicle number: 55703, SANDT 410 Hydraulic Swing-Arm Cutting Press – 18 tonnes Price: €3,650 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands Very clean and robust German hydraulic swing-arm cutting press manufactured by J. Sandt AG, Pirmasens. Suitable for die-cutting materials such as leather, rubber, plastics, foam, felt, textiles, gasket material, cork and cardboard. Technical specifications * Manufacturer: J. Sandt AG * Model: 410 * Serial number: 55703 * Year of manufacture: unknown, presumably late 1960s * Cutting force: 18 tonnes * Working table: 900 × 450 mm Psdpfx Amezqhdioyspw * Swing-arm pressure plate: 550 × 350 mm * Measured clearance: approximately 110 mm * Mechanical height adjustment by handwheel * Electrical supply: 380 V, 3-phase, 50 Hz The machine is in clean, used condition and has been repainted. The lower cutting plate and the aluminium upper plate show signs of use. Machining and surface-grinding of both the lower and upper plates can be carried out upon request for an additional €250. The machine can be inspected and tested by appointment. Loading onto the buyer’s transport can be arranged. All information is provided to the best of our knowledge and is subject to verification.

Condition: used, Year of construction: 2010, power: 15 kW (20.39 HP), input voltage: 380 V, pressing force: 175 t, stroke length: 280 mm, operating speed: 9 mm/s, reverse speed: 80 mm/s, table width: 90 mm, table height: 900 mm, throat depth: 400 mm, ram plate length: 3,100 mm, distance table to ram: 429 mm, clearance between the columns: 2,550 mm, oil tank capacity: 185 l, total length: 5,000 mm, total width: 2,170 mm, total height: 2,800 mm, overall weight: 9,600 kg, We are offering this used Blecken CNC HAPPE SE 3100 X175 straightening press, year of manufacture 2010. Technical Specification: Blecken CNC HAP 3100-175 Hydraulic Press Brake Model: Blecken CNC HAP 3100-175 with Delem ER70 CNC control Axes: 4 axes (Y1, Y2, X, R) Capacity and Performance • Pressing force: 175 t • Bending length: 3,100 mm • Approach speed: 100 mm/s • Bending speed: 9 mm/s • Return speed: 80 mm/s Dimensions and Travel • Distance between uprights: 2,550 mm • Cylinder stroke: 280 mm • Table/opening height: 429 mm • Throat depth: 400 mm • X-axis travel: 500 mm • X-axis speed: 500 mm/s • R-axis travel: 200 mm • Working height (table): 900 mm • Table width: approx. 90 mm General Specifications • Motor power: 15 kW • Oil tank capacity: 185 l • CNC control: Delem ER70 • Noise level: ≤ 70 dBA • Voltage: 380 V Physical Dimensions and Weight • Overall length: 5,000 mm • Overall height: 2,800 mm • Overall width: 2,170 mm Ppjdpfx Amey Rw H Asyjw • Weight: 9,600 kg If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, Pressure: 100 T Ppjdpfx Amo Du U Reysw Length of stroke: 150 mm Down table size: 800 x 650

Condition: used, Pressure: 200 T Down table size: 1.250x1.500 mm Ppjds Du Umopfx Amyjw Technical characteristics: BACK PRESSURE NEW ELECTRIC AND HYDRAULIC SYSTEMS

Condition: used, Pressure: 200t Pedpe Dvalofx Amyspw Length of stroke: 200mm Up table size: 800x700mm Down table size: 800x700mm Weight: 7000kgr New electric and hydraulic systems

Condition: used, Pressure: 300t Length of stroke: 500mm Up table size: 1760x1200mm Down table size: 1760x1200mm Back pressure: 100t Weight: 33000kgr New hydraulic and electric systems EXCELLENT CONDITION Podpfx Ams Dvateyepw

Condition: used, Pressure: 250 T Length of stroke: 120 mm Down table size: 1600x1600 mm NEW HYDRAULIC AND ELECTRIC SYSTEMS Pjdpfx Amj Du U Doyepw