Used machining centers for stone and marble for sale (13)

Condition: used, Year of construction: 2008, functionality: fully functional, Used machine for edge polishing stone, marble, and granite. It can process straight, half bullnose, and round edges. It can polish 9 different profiles; 6 tools can be stored. Hodpez E Rg Hsfx Af Sou It can handle materials with a thickness of 2-10 cm. Automatic tool changer. The machine is in very good condition, with only 1600 operating hours. It has been tested in our warehouse.

Condition: used, Year of construction: 1996, machine/vehicle number: -, functionality: fully functional, operating hours: 50,000 h, input voltage: 400 V, input current: 120 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 12,000 mm, travel distance Z-axis: 400 mm, workpiece width (max.): 2,000 mm, number of axes: 3, overall weight: 35,000 kg, year of last overhaul: 2024, Hello, I have for sale a granite slab polishing line by Breton, as shown in the photos. The line is equipped with 17 heads and is fully operational following a complete overhaul, featuring a new belt, new software, four tables, and a slab dryer at the exit table. Upon purchase, we will demonstrate the machine in operation. We offer the machine with pre-set processing parameters and expertise for achieving a perfect polish, along with access to a proven service team that handled its overhaul. The machine is ready to start work immediately after installation. For any questions, please contact me by phone or email. Hodpfx Aoy Ewniof Sou

Condition: used, Year of construction: 2019, machine/vehicle number: 28, functionality: fully functional, operating hours: 3,964 h, input voltage: 380 V, type of input current: three-phase, number of slots in tool magazine: 21, total height: 2,500 mm, total length: 8,000 mm, total width: 4,000 mm, table length: 3,600 mm, table width: 800 mm, Machine offered on behalf of a customer – request the brochure with images & videos and the seller’s contact information. THIBAUT Edge processing center T658, manufactured in 2019, #029 • Toothed / drive belt new, to be replaced in 08/2026 • Grinding, polishing, and satin finishing of: - Straight edges up to 40 cm high - Profiled edges - Curved edges with rollers • Automatic tool changer with ISO 40 mount and pneumatic clamping force • Tool magazine with 21 slots • Operation via touchscreen • Automatic detection of workpiece position and thickness for a maximum of 5 workpieces Hedpjzu Tltjfx Af Ssu • Table dimensions 3.60 x 0.80 m with consoles for rotary and lifting table for aligning the workpieces, table with new rubber coating • 4 rows of all-round rollers, height-adjustable • 6 pneumatic cylinders for clamping the workpieces • 4 clamping holders for locking the workpieces • Space requirement approx. 8.0 x 4.0 x 2.5 m • Tools / accessories - 5 planetary grinding heads AR3 with ISO 40 - 8 ISO 40 mounts for rollers 200 mm - 16 ISO 40 mounts for grinding media 100 & 130 mm - 1 ISO 40 mount with disc 300 mm Pricing: • EXW from the machine location, plus VAT, subject to prior sale, no tools included, attachments, accessories shown in the pictures are not included in the machine/scope of supply. Payment terms: • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty: • Machine as is, excluding any warranty claims Inspection possibility: • At the operating site near Kaiserslautern Availability: • Short-term / immediately after consultation

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 03814V2200, functionality: fully functional, operating hours: 2,416 h, input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, number of slots in tool magazine: 1, total height: 2,400 mm, total length: 3,000 mm, total width: 1,200 mm, overall weight: 1,100 kg, table length: 2,200 mm, table width: 280 mm, coolant supply: 3 bar, feed length X-axis: 2,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 280 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 4,500 W, number of spindles: 1, rapid traverse Z-axis: 6 m/min, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 7 m/min, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 1,000 rpm, table height: 1,200 mm, Equipment: rotational speed infinitely variable, NUMERICALLY CONTROLLED PANTOGRAPH WITH VERTICAL PLANE MODEL "VERTICAL 2200 OPEN" WITH 3 INTERPOLATED AXES FOR WORKING MARBLE AND GRANITE basic assembly: - range: x-axis=2200 mm. y-axis=1200 mm. z-axis=300 mm; - work surface L. 2500 x H. 1250 mm; - heavy carpentry-made structure in processed and painted steel; - Side openings with loops, both on the left and on the right, for processing oversized blocks with support rolls; - slabs and carter support in inox steel; - highly deep workbench made with extruded aluminium profile ; - slab locking with n°2 clamps with mechanical blocking device; Hodjygxc Aopfx Af Ssu - three-phase electro spindle hp 5 1/2 gas connection with perforated shaft and rotating joint for water passage for internal and external tool refrigeration, and inverter for variation to maximum 18000 r.p.m .; - openable polycarbonate protection for electro-mandrel, with safety micro; - axes movement by means of runners and sliding blocks of balls recircle; - dust tents for total protection of all moving parts; - water cooling tool system with centralized drain, including pump, decanting tanks and locking electrovalve; - electronic panel with console comprising numeric control, pc and monitor. Windows software included ARTCAM INSIGNA: - carrying out of reliefed and engraved writing, using all "true Type" fonts; - cad for carrying out drillings, cuts, engravings, millings and inlays; - import of most common types of files as dxf and dwg to create writings, drawings and stamps, reliefed and engraved logos, showr trays, sinks, arcs and portals; - automatic drilling for inserting bronze letters; - carrying out single and multiple sculptures in high and bas-relief; automatic switch off; 3D PLAN LASER laser copyng system to import manufactured products and tree-dimansional figures (bas and hight - relief) with interface and software for required dimensions

Condition: used, Year of construction: 1996, machine/vehicle number: 544, functionality: fully functional, Multifunction machine for processing natural and artificial stone. Ideal for the tombstone, restoration, and construction sectors. Z-axis height adjustment: 600 mm. X-axis travel: approx. 4500 mm. Pneumatic pressure control (ideal for grinding, polishing, and brushing surfaces). Variable speed drive motor: 250-2950 rpm. Articulated arm locking system. Hydraulic side grinding mechanism. Work table. Marble grinding unit. Granite grinding head. Hjdozrabpjpfx Af Ssu

Condition: used, Year of construction: 2014, x-travel 1740 mm y-travel 760 mm z-travel 660 mm Control PC-Fusion-640M spindle taper SK 40 spindle turning speed range 40 - 12.000 U/min spindle motor 30 kW distance spindle centre table top edge 180 - 840 mm table load 1400 Kg distance spindle center to column 830 mm rapid travel x/y/z 36 m/min table width 760 mm table length 2000 mm 5-T-slots - width x distance 18 x 125 mm table height over floor 825 mm tool change unit 30 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 110 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 140 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 360 l high-performance coolant system 15 bar total power requirement 22 kW Hedpfxezz Afio Af Seu weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 3,5 x 3,1 m Standard Equipment / Included Accessories - Through-Spindle High-Pressure Coolant System (15 bar) - Manual Pulse Generator (MPG) - Hinged Belt Chip Conveyor, Right-Hand Side Discharge - Torque-Controlled Chip Breaking Drilling Cycle - Performance Software Package Performance Software Package Includes - 600 User Variables - MAZAK Tornado Boring & Tapping Cycle (EIA/ISO) - Synchronous Tapping - EIA/ISO Program Input - Extended EIA/ISO Functions - G93 Inverse Time Feed - G37 Automatic Tool Length Measurement - Sequence Number Comparison Stop Function - G0 Inclination Constant - Additional Work Coordinate Systems (G54.1) - Thread Cutting Function General Machine Features Adaptive Feed Control (AFC) The Adaptive Feed Control system continuously monitors spindle motor load and feed axis servo load. If a significant deviation from the programmed load is detected, the feed rate is automatically adjusted to maintain optimum cutting conditions, improve productivity and protect the cutting tool. - MAZAK Standard Machine Colour Safety Equipment - Operator Safety Door with Interlock Switch - Fully Enclosed Splash Guard - Integrated Work Area Lighting - CE Conforming Machine Coolant System Through-Spindle Coolant (TSC) - Through-spindle coolant system - Pump pressure: 5 bar Complete coolant system including pumps, valves, piping and coolant nozzles for efficient machining and reliable chip evacuation. Measuring System Automatic Tool Length Measurement Automatic measurement of small-diameter tools without operator intervention. Chip Disposal Machine prepared for side-mounted chip conveyor CNC Control - MAZATROL PC Fusion CNC 640M - 10.4" Colour LCD Display - Relocation Detector MAZAK Tornado Boring & Tapping Cycle (MAZATROL) Helical interpolation allows boring and tapping operations over a wide range of diameters using a single tool, significantly reducing programming time and machining time while increasing flexibility. Background Tool Path Verification Tool paths can be verified in the background while another NC program is being executed in automatic mode. Machining Navigation – Prediction Prior to machining, the control predicts machining time, spindle load and other operating parameters, allowing programs to be optimized for maximum productivity. Machining Navigation – Monitoring Real-time display of machining conditions and machine loads with continuous feedback for process optimisation. Machining Navig...

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 399, functionality: fully functional, Equipment: documentation/manual, Thibaut multifunction machine for processing natural stone Monoblock design (no foundation required) Hjdpfx Aoy Iu Ixef Seu Spindle speed: 250 - 10,000 rpm Automatic vertical oscillation Vertical motorised fine adjustment of the spindle Tool holder: SK 40 Pneumatic contact pressure 300 mm spindle height adjustment 100 mm pneumatic height adjustment X-axis travel: 3,400 mm Worktable with tilting adjustment Worktable size: 3,000 mm x 970 mm Articulated arm locking system Marble grinding plate (receptacle 3 x Frankfurt type) Includes tools and arbors

Condition: good (used), Year of construction: 2019, functionality: fully functional, We are selling our used THIBAUT 815 V4, a proven multifunction machine for the professional processing of natural and engineered stone. Hjdpswu Rg Djfx Af Ssu The machine is in good, fully functional condition and ready for immediate use. Ideal for stonemasonry businesses, workshops, or restorers looking for a robust and versatile solution for cutting, milling, drilling, and polishing tasks.

Condition: new, Year of construction: 2021, Brand-new stone processing machine. Numerous accessories, including a vacuum system and stone milling bits. The kit includes everything needed to get started. Thank you. Hedpfoztptkox Af Sou

Condition: used, Year of construction: 1995, x-travel 1700 mm y-travel 400 mm Hsdpjvf Rhwjfx Af Ssu z-travel 400 mm Control Siemens 480 D Number of axles 4 St. table width 500 mm table length 2000 mm tooltaper DIN 2079 SK 60 SK 40 total power requirement 16,25 kW weight of the machine ca. 4750 kg dimensions of the machine ca. 3000x 2500x 2800 m Machine number 9599 - 4th axis / horizontal / diam. 315 mm - Chip conveyor - tool changer for 20 tools

Condition: refurbished (used), functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input frequency: 500 Hz, workpiece length (max.): 3,400 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 200 mm, table length: 4,500 mm, table width: 2,300 mm, table height: 1,800 mm, table load: 500 kg, 5-Axis Waterjet Cutting Center equipped with: - integrated working tank - 4.200 bar full electric e-drive™ - 19” numerical control - abrasive pressurized tank - cutting head - watercad-cam software accessories included - 5 axis ±55° interpolating system and touchwave ce-ramic™ - loading and unloading system - light laser barriers Included expenses: - Installation of the machine(s) - Machine full-load start-up Hjdexbgvfepfx Af Sou - Practical training to BUYER’S staff on the machine functions

Condition: new, Year of construction: 2026, functionality: not functional, input voltage: 420 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,300 mm, travel distance Y-axis: 6,680 mm, number of axes: 9, number of slots in tool magazine: 15, total height: 4,100 mm, total length: 7,920 mm, total width: 9,000 mm, overall weight: 18,000 kg, Equipment: CE marking, documentation/manual, WatMachinery NHSB 3517 5-AXIS is a fully automated stone-processing production system engineered as a self-contained manufacturing cell. It integrates loading, multi-technology cutting, automatic part transfer, contouring, and finishing into one controlled process chain. By automating workpiece transport and positioning and executing machining operations in sequence, the NHSB 3517 increases throughput, improves repeatability, and reduces variability associated with manual handling and operator-dependent setups—delivering consistent quality shift after shift. Built on a compact platform that combines a 5-axis sawjet and a 5-axis CNC contouring center, the machine supports diamond blade cutting for high-productivity straight and profile cuts, an independent 5-axis waterjet for internal geometries and tight radii, and hybrid strategies that use both technologies for optimized edge quality and process stability. The production cycle begins with ergonomic slab loading via a tilting table, followed by material alignment including vein-oriented positioning for visual matching. Primary cutting and separation are performed with automatic selection of blade, waterjet, or combined cutting. Parts are then transferred through an automated handling sequence using a vacuum manipulator system with eight vacuum cups (lifting capacity up to 500 kg / 1,100 lbs), enabling safe and stable slab and workpiece manipulation. A dedicated finishing workflow completes the process with automatic positioning on suction-cup fixtures, followed by unloading without manual intervention. The 5-axis head assembly is configured for multi-operation processing and includes a diamond cutting spindle, an independent 5-axis waterjet head, and multi-head edge-finishing units for efficient flat-edge polishing, supported by vacuum handling plates for secure, repeatable part manipulation. An integrated slab washing apparatus cleans the surface before vacuum operations to improve grip reliability and positioning stability. The machine can be supplied with an on-board camera (accuracy ±5 mm) to capture slab images for software-based nesting and defect avoidance, and probing systems such as a laser probe and stone perimeter probing to enhance dimensional accuracy and alignment. The industrial CNC controller features an operator-friendly HMI, supports DXF import and G-code execution, and also provides a manual mode for quick operations and simple cuts. Designed for manufacturers producing countertops, bathroom elements, stairs, and architectural stone components, the NHSB 3517 5-AXIS delivers higher automation, reduced manual labor dependency, and measurable gains in productivity and process consistency. Hedsylkf Topfx Af Ssu

Condition: new, Year of construction: 2026, For sale: versatile Eckert Opal Waterjet cutting system, ideal for processing stone (natural stone, marble, granite), but also suitable for a variety of other materials. Waterjet cutting is performed without thermal impact, enabling precise and clean cutting edges. Perfect for complex contours, inlays, cutouts, or demanding shapes in stone. 🛠 Technical Specifications & Equipment (Manufacturer Data) Working width: 1,000 – 6,000 mm Working length: 1,000 – 12,000 mm Cuttable material thickness (waterjet 2D): 0.5 – 250 mm Cuttable material thickness (waterjet 3D, optional): 0.5 – 150 mm Positioning speed: up to 25,000 mm/min Positioning accuracy: ± 0.025 mm Design: Gantry construction with closed steel profiles for maximum stability and durability. The cutting tank is statically decoupled and corrosion-protected. Control system: Modern CNC control with touch display (Corning® Gorilla® Glass) – intuitive to operate for efficient workflow. Cutting process: Pure water or abrasive waterjet cutting; optional 5-axis cutting head available for 3D/bevel cutting. Optional additional equipment (if available / to be specified): [e.g. “Pro-X 3D Cutting Head”, “Abrasive Cutting”, “Multiple Cutting Heads (e.g. 2-Head / 4-Head)”, “CAD/CAM Software”, “Water Softening System”, “Scraper Chain Conveyor”, “Wastewater / Filtration Unit”, etc.] 🎯 Ideal for: Stone and natural stone processing businesses, marble or natural stone design workshops. Hedpfex A Tr Nsx Af Sju Companies requiring precise, heat-free cuts for contours, inlays, cutouts, or shaped stones. Operations that value clean cutting quality, minimal reworking, and high flexibility in terms of materials. Projects with complex shapes, bevel cuts, or 3D processing – especially with the optional 3D cutting head.