4 column single action presses

HL 450 ton 4 column press

Condition: good (used), Year of construction: 2000, total height: 47,000 mm, total width: 27,000 mm, total length: 25,000 mm, table width: 1,000 mm, table length: 1,800 mm, overall weight: 43,000 kg, ram plate width: 600 mm, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Bledpfxotiwgis Ab Tor Separate control cabinet Ritta Side passages Ground level installation

Condition: excellent (used), Year of construction: 2004, with soundproof booth Blodpfx Aji An Ttsb Tor Table surface 1000x550 mm, ram surface 1000x450 mm

Year of construction: 2020, condition: new, machine/vehicle number: DF0240 - Rev.00, pressure:300 t passage width:600 mm stroke:500 mm Weight of machine approx.:8,5 t dimensions:ca. 2275 x 1650 x 4050 mm Return Capacity:30 t Engine Output:30 kW Max Working height:800 mm Approaching Speed max. :10 mm/sec Pressure Speed:10 mm/sec Travel:500 mm Ram plate:600 x 600 mm Table size:600 x 600 mm Table height above ground level (approx.):850 mm Oil Tank Capacity:350 l Oil cooling (electric):1,5 kW (max) ejector stroke:250 mm pressure of ejector:50 t Maintenance Balcony:2.800 ? Drip pan to prevent oil spil:2.800 ? Upper and lower tooling (for 8kgs salt stone):11.000 ? automatic filling with 500 kg depot:58.000 ? speed increase to 80 mm/sec:19.000 every additional meter conveyor belt:850 ? Light barriers front and back:6.800 ? Side trim:4.200 ? Bsdedxvfkjpfx Ab Telr 7m roller coaster-for salt stone transport and interim storage:12.900 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

Condition: ready for operation (used), Nominal force: 2500kN, operating pressure: 20MPa, ram speed down/up: 210/110mm/s, ram stroke: 500mm, throat depth: 360mm, max. distance between table and ram: 800mm, rated current: 41A, control voltage: 60V, rated voltage: 380V, connected load: 20.5kW, weight: 8t. An on-site inspection is possible. Bodpfx Ajxcx Aaob Tjlr

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 2000 mm stroke 600 mm Distance table/ram, stroke up 1000 mm table surface area 1700 x 1300 mm table height over floor 800 mm die cushion pressure in table 100 t die cushion stroke in table 180 mm Die cushion area in table 1650 x 700 mm side window 1000 mm ram surface 1700 x 1400 mm weight 31,1 t dimensions (WxDxH) 3,3 x 1,9 x 4,85 m Height above floor 4,55 m Bljdpfovut Tnjx Ab Tsr permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1988, pressure 300 t distance between columns 1800 mm stroke 1000 mm Distance table/ram, max. stroke up, adjustment up 1300 mm Table surface area 1600 x 1200 mm Table height above floor 1080 mm Bjdpfjvut Hnex Ab Tolr Ram surface 1600 x 1200 mm Weight 24,0 t Dimensions (WxDxH) 2,8 x 2,1 x 6,0 m permitted for manual loading according to the German Safety Regulations (UVV §20) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F Video at seller's site before dismantling available

Condition: used, Year of construction: 1992, functionality: fully functional, installation height: 700 mm, pressing force: 250 t, table width: 1,250 mm, table length: 1,150 mm, die cushion stroke: 150 mm, stroke length: 400 mm, Hydraulic double column press DUNKES HDS 250/10 Year of construction 1992 Technical data: Pressing force at 260 bar: 250 tons Rapid lowering speed: 365 mm/s Table clamping area approx.: 1150 x 1250 mm Ram clamping area approx.: 1150 x 1250 mm Die cushion area approx.: 800 x 1000 mm Die cushion pressing force (200 bar): 100t Die cushion stroke: 150mm Power requirement: 45 kw Installation height: 700 mm Bodpfxoup Si Hj Ab Telr ram stroke: 400 mm Conversion of the control system to SIEMENS (in 2005) Machine height approx. 5,400 mm TP language currently Polish

Condition: good (used), Year of construction: 1990, 1. machine data Manufacturer: Hydrap Pressen Maschinenbau GmbH Designation: Hydraulic pressure press Type: HPDZb 250 M-No.: H40/ 6323 Year of construction: 04/1990 Weight: 30 tons Depth x width x height: 4 x 4.5 x 6 m 2. connection data Mains voltage: 380V Frequency: 50 Hz Output: 55 kW 3. technical data Distance between the stands: front 1350 mm Lateral 720 mm Nominal force: 2500 kN Number of pressure pistons: 1 Clamping table: 1,300 x 1,000 mm Stroke adjustment: 450 mm 4. general The drawing cushion is defective and must be repaired. Bedpfx Abjt D Eivj Telr The machine is available immediately. The machine has been disconnected from the mains as it had to be relocated due to conversion work. The sale is ex works: dismantling, removal, loading and transportation are at the buyer's expense.

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, pressing force: 315 t, table width: 1,600 mm, table length: 1,100 mm, overall weight: 40,000 kg, working height: 1,300 mm, stroke length: 700 mm, Equipment: safety light barrier, Press Müller ZE_315_16 315T A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2018. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller ZE_315_16 315T Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2018. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Bedev Hp Acopfx Ab Telr Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 1992, Pressure 200 t distance between columns 1910 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1900 x 1150 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 300 mm die cushion area 1500 x 950 mm table height over floor 800 mm side window 1000 mm ram surface 1900 x 1100 mm return capacity 36 t speed down 400 mm/s speed up 170 mm/s working speed 30,5 mm/s oil volume 1500 l Bedovuui Ropfx Ab Telr height over floor 4,85 m height beneath floor 2,6 m power requirement 45,0 kW weight 38,0 t dimensions (WxDxH) 3,05 x 2,8 x 5,55 m year of manufacture 1975 - modernization 1992 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, ram interlocking can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F