Used Combined Drawing for sale (5,140)

Condition: good (used), Year of construction: 2020, functionality: fully functional, Length approx. 2250 mm, width/depth approx. 1370 mm Weight approx. 695 kg, Jointer: Maximum chip removal 5 mm Extraction connection: Extraction nozzle Ø120 mm Thickness planer: Ijdpfx Ahoykaqcsvshw Working height min. 3 mm Working height max. 240 mm Minimum workpiece length 220 mm Maximum chip removal 5 mm Drive motor power 7 kW Connection voltage 400 V Mains frequency 50 Hz Planer shaft type TERSA 4 planer knives Speed 5000 rpm Maximum planing width 520 mm Feed: Feed speeds 5/8/12/18 m/min Very good condition Available around September 2026 Shipping possible at extra cost!

Condition: used, Year of construction: 1985, round bar steel 40 mm Ihedpjydqn Sefx Ahvjw square edge steel 40 mm L-beam 120 x 12 mm Punch power 600 kN hole punching press: throat 400 mm hole punching press: max. length of stroke 32 mm hole punching press: capacity (dia. x thick.) 30 x15 mm hole punching press: capacity (dia. x thick.) 20 x 20 mm notching: l + T material 80 x 10 mm no. of strokes 40 / 46 Hub/min shear: flat material 150 x 15 mm shear: length of knifes 275 mm total power requirement 3 kW weight of the machine ca. 2,9 t dimensions of machine L x W x H 2,18 x 0,83 x 2,15 m Accessories: tool cabinet with various punches and dies, length stop

Condition: good (used), For sale is a used Hammer C3-31 Comfort 4-way combination machine with a cutting length of 2000 mm. The machine is in good condition and has been cleaned and inspected by our professional staff. Technical data: - Cutting length: 2000 mm - Cutting width: 1300 mm - Cutting height: 102 mm - 4 spindle speeds - 3-knife cutterblock - Planing width: 310 mm - Dust extraction port Ø 120 mm - 3 motors, each 3 kW / 4.1 HP - Year of manufacture: 2009 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Ihedpfsyuykkex Ahvjw Related terms: combination machine, combined machine, planer, thicknesser, thicknessing machine, panel saw Reference: R-A2323

Condition: good (used), Code: 0326 Brand: SCM MINIMAX Model: CU 350 K - CE Standard Universal 7-works combined machine for joinery, furniture, custom-made furnishings, doors, wooden window frames , panels and various – CE Standard Technical data: Aluminium carriage sliding on hardened and ground steel guides 3000 mm Surface planer: Surface planer width 350 mm Total table length 1800 mm Spindle speed 4850 rpm Guide incliantion 90–45° N° 3 cutters Thickness planer: Table dimensions 600 x 350 mm Min/max working height 3–230 mm Max removal 5 mm Spindle moulder: Spindle length 136 mm Rotation speed 1400/3500/6000/8000 rpm Max tool diameter 180 mm Cover with vertical clamps Circular saw: Aluminium carriage length 3000 mm Tilting blade 0–45° Max blade diameter 300 mm Spindle speed rpm 4000 Cutting width at parallel guide 900 mm Squaring frame fitted with telescopic guide with 2 adjustable reference stops Protective cover Mortising machine: Table dimensions 430 x 220 mm Ihjdsyuxplopfx Ahvew Workpiece clamping presser Vertical stroke 100 mm Transversal stroke 155 mm Longitudinal stroke 115 mm N° 3 motors 3 Hp each Suction inlets diameter 120 mm Overall dimensions of mounted machine mm 3000 x 2800 x 1150 h Overall dimensions for transport mm 3000 x 1400 x 1300 h Weight kg 690

Condition: used, Year of construction: 2005, Pressure 1000 t distance between columns 4100 mm stroke 1200 mm Distance table/ram, stroke up 2100 mm Table surface area 4000 x 2200 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm Die cushion area in table 3500 x 1600 mm Die cushion pressure in ram 100 t Die cushion stroke in ram 160 mm Die cushion area in ram 3250 x 1600 mm Ram surface 4000 x 2200 mm Side window 1300 mm Oil volume 8000 l Power capacity 300,0 kW Dimensions (WxDxH) 5,75 x 4,3 x 9,55 m Height above floor 7,7 m Ihsdpfx Asvuubgshvjw year of manufacture 1973 - modernization 2005 with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition Video at seller’s site before dismantling available

Condition: used, Year of construction: 1996, pressure 100 t distance between columns 1525 mm stroke 450 mm distance table/ram, max. stroke up, adjustment up 850 mm table surface area 1500 x 1150 mm pressure of drawing cushion in table 30 t stroke of drawing cushion in table 150 mm table height over floor 940 mm side window 480 mm ram surface 1500 x 1150 mm oil volume 1200 l weight 25,0 t dimensions (WxDxH) 4,2 x 1,75 x 5,1 m light guard Sick permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, mechanical depth stop Ijdpfx Ahovuufxjvohw No foundation pit necessary 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 2000 mm stroke 600 mm Distance table/ram, stroke up 1000 mm table surface area 1700 x 1300 mm table height over floor 800 mm die cushion pressure in table 100 t Ihsdpfovut Tnjx Ahvjw die cushion stroke in table 180 mm Die cushion area in table 1650 x 700 mm side window 1000 mm ram surface 1700 x 1400 mm weight 31,1 t dimensions (WxDxH) 3,3 x 1,9 x 4,85 m Height above floor 4,55 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1996, pressure 160 t distance between columns 1380 mm Iedpfjvut Ilex Ahvshw stroke 300 mm distance table/ram, max. stroke up, adjustment up 500 mm table surface area 1250 x 850 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 150 mm die cushion area 450 x 450 mm table height over floor 900 mm side window 250 x 400 mm ram surface 1350 x 850 mm speed down 400 mm/s speed up 350 mm/s working speed 50 mm/s oil volume 1850 l power requirement 58,0 + 11,0 kW weight 24,1 t dimensions (WxDxH) 2,85 x 2,15 x 4,6 m permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic drawing cushion / ejector in table, cutting impact cushioning, mechanical depth stop (motoric adjustable), ram interlocking can be offered without or with putting into operation in given condition

Condition: excellent (used), Year of construction: 1987, Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Peddinghaus, hydraulic profile steel shear type Peddiworker 400 -Drive: hydraulic -Pressure force: 40 tons Ihjdsyupxwjpfx Ahvew -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, pipe notching -Dimensions: 870/660/H1630 mm -Weight: 860 kg

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Iedpfxsyupuls Ahvshw Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, Year of construction: 1989, Model - 600/6 Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. Isdpoyubh Rofx Ahvehw They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. The dies will be sold in their "used, working, seen and liked" condition.

Condition: used, Year of construction: 1976, machine/vehicle number: 8841, pressure:25 t throat:260 mm stroke:500 mm die cushion capacity:10 t die cushion stroke:200 mm Ihedpfx Ahecxxp Eevow Size of table plate:500 x 500 mm total power requirement:11 kW weight of the machine ca.:3 t dimensions of the machine ca.:1,40 x 1,10 x 2,80 m

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Ihodpefxyh Rsfx Ahvsw Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: excellent (used), SICAR Thickness Planer, Italian-made Planing width: 500 mm 4 knives 4 feed speeds Ihsdpfjyvhixsx Ahvow Thickness table mounted on 4 screws Electric adjustment of the thickness table Digital planing thickness display Max planing thickness: 250 mm Length of jointer tables: 200 cm Electric brake Adjustable jointer fence Motor: 4 kW Machine tested, very good condition Weight approx. 700 kg

Condition: used, Year of construction: 1986, L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm Ihedpfx Ahst D Nz Ajvew hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: excellent (used), Combined veneer press, wide belt sander, veneer saw - Press area 2270 x 970 mm - Pressing height 140 mm Ihsdoytunbjpfx Ahvew - Max. pressing pressure 2 kg per cm² (requires compressor: 4 bar, 220 l) - Veneer saw: cutting length 2600 mm, cutting height 60 mm, saw blade Ø 250 mm - Belt sander: table 2600 x 800 mm, sanding height 200 mm; L/R run; speed 19 m/sec, with extraction fan 11 m³/min chassis; filter bag missing; foldable belt cover - Lighting for sanding table - Approx. weight 2 t

Condition: good (used), Year of construction: 1992, For sale is a used Kity AD-310 surface planer and thicknesser with a planing height of up to 230 mm. The machine is in good condition and has been serviced and inspected by our professional staff. Technical data: - 3-knife cutter block - Planing width: 310 mm - Surface planer table length: 1550 mm - Max. workpiece thickness: 230 mm - Includes mortising attachment - Motor power: 2.2 kW / 3 HP - Year of manufacture: 1992 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Ihjdjyttckopfx Ahvow Related terms: surface planer, thicknesser, planer, planing, thicknessing Reference: R-Y00MG

Condition: excellent (used), Year of construction: 2022, For sale is a used Holzmann surface and thickness planer HOB410PRO with a planing thickness up to 225 mm. The machine is in very good condition and has been reconditioned and inspected by our qualified staff. Technical data: - 4-knife cutterblock - Planing width: 410 mm - Surface planer table length: 1820 mm - Max. workpiece height: 225 mm - Suction connection Ø 120 mm - Motor power: 5.5 kW / 7.5 HP - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Ihjdpfsytr U Sex Ahvew Related terms: surface planer, thickness planer, planer, jointer, thicknesser Reference: R-X008Z

Condition: used, Dimensions (LxWxH): 1084x996x1782mm Brand: FRIMA (Rational) Model: FSCC WE 202 Type: Combi oven (steam / convection) Manufacture: Germany Protection rating: IPX5 Use: Professional kitchens (restaurant, hotel, canteen) 20 levels for GN 2/1 or 40 levels for GN 1/1 trays Production capacity: 300 to 500 meals/day Steam: 30°C – 130°C Hot air (convection): 30°C – 300°C Combined steam + hot air: 30°C – 300°C Voltage: 400V Power: 65.3kW Weight: 370kg Ijdpfeyu Id Eex Ahvehw Main functions - roasting - steaming - grilling - braising - baking / pastry - regeneration (finishing) Connections Water pressure: 150 – 600 kPa (1.5 – 6 bar) Water inlet: R 3/4 Smart features - SelfCookingControl system - Automatic cooking by food type - 5 fan speeds - Humidity control - Automatic cleaning - Core temperature probe - Cooking program memory

Condition: new, Sheet metal cutting moulds Sheet metal cutting moulds Sheet metal form moulds Hot brass forging Hot steel forging Cold steel forging Cold forged aluminium & steel Deep drawing moulds Automotive and spare parts white goods Product Info: No pit required Ihedpfx Asfuangjhvsw Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Year of construction: 2008, condition: excellent (used), SMG HZPU 8000-3000/2100-S1 Hydraulic Drawing Press Brand SMG Iedpfsn Awd Rsx Ahvehw Type HZPU 8000-3000/2100-S1 Year 1995 Description Hydraulic Drawing Press H frame hydraulic press Pressing force 800 ton Clamping area Approx. 3,000 x 2,100 mm Installation height Max. 1,400 mm

Condition: used, Year of construction: 1993, pressure 630 KN distance between columns 800 mm stroke 150 mm table surface area 720x550 mm ram surface 720x520 mm dayligth 420 mm rapid drop speed 394 mm/sec Ihedpfx Ajyutwkshvsw working feed 71/17 mm/sec return speed 390 mm/sec adjustment movement of the stroke 120 mm total power requirement 15 kW Cutting impact dampening The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x2070x1135 mm Weight 320 kg Iedpfx Ahsvz E Siovehw Total power requirement 2,2 kw

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Iedpforz Tutjx Ahvshw Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: DF0052, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Ihedpfx Ajfxyirohvow Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec