Used Hydraulic Punch for sale (16,771)

Condition: good (used), Hydraulic punch type HE - Punching force up to approx. 20t - power approx. 3kW - stroke approx. 100 mm - table dimensions approx. W: 400 mm D: 300 mm - installation height approx. 230 mm Predpfx Adod A Tp Tjnsd - 2-hand safety control - set-up operation by foot switch Other hydraulic and pneumatic punches in stock. Do you need the right punching tool? - Please let us know. We will be happy to make you an appropriate offer.

Condition: used, Hydraulic punch, punch frame for use with JOKA punching units type HP-S Hydraulic hole punch, hydraulic press for punching brackets Year of manufacture: approx. 1995 Pressing force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punching unit width: max. 54 mm Punching unit installation height: max. 220 mm Die holder: Ø 48 mm Motor output: 1.5 kW Power supply: 230 Volt, 50 Hz - Suitable for universal use with JOKA SW 20 or SWD 20 punching units - Throat depth of punching units can be larger, can be pushed through to the rear - Stroke release via electric two-hand control - Hydraulic power pack HAWE, type HCW 4 / 2.5-B 1/400-1 - On subframe, mobile Required space (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition Pedpfx Aeltrmujdnord

Condition: good (used), Year of construction: 1995, machine/vehicle number: 6194, Offer 22553 Technical Data: - Pressing force at 10 bar 35 KN - Ram stroke 12 mm - Throat depth 95 mm - Installation height approx. 134 mm - Table size approx. 230 x 190 mm Pedpfxewp Hapo Adnerd - Air consumption per stroke 8.0 l - Air input 6 - 10 bar - Required space approx. W 520 x H 1250 x D 600 mm - Weight approx. 100 kg - with: - Foot pedal - Pressure gauge + regulator - 2 x punching tools

Year of construction: 2001, condition: good (used), Hydraulic punching machine Fabr.EDEL Type: POWERPROFI 205 Bj.2001 with many accessories In good condition . Punching force 200 kN throat 560 mm Tools up to 100 mm Die thickness: 0.5 to approx. 10 mm. Further data see data sheet . Pjdpfjqwg Acjx Adnerd

Condition: good (used), Year of construction: 1995, Technical data: Psdpohikdaefx Adnjrd - Pressure capacity 250 KN - max. sheet thickness 6 mm - max. punching diameter 90 mm - stroke 42 mm - throat 500 mm - maximum stroke rate 200 H/min - connected load 4 kW - space requirement LxWxH 1000 x H 1750 x D 1400 mm - weight approx. 1600 kg

Condition: used, Punch, hydraulic punch, hydraulic press, hydraulic press -Insertion tool -Width: 290 -Length: 550 Psdpfx Adeb A H Tasnord -Height: 260 -with hydraulic unit -Control -Foot switch -Dimensions: 800/700/H1300 mm -Weight: 400 kg

Condition: new, Hydraulic punch model EHS-120 Pedpfxed Rh A Tj Adnsrd Punching force up to approx. 12t. Design and size depending on the requirements profile. Optional with base rigid or mobile, length stops, positioning system, etc... On request, we will provide you with the right punching tool for your area of responsibility. (pictured machines are equipped with customer-specific tools).

Condition: used, Punching force: 500 kN Prjdporanq Hjfx Adnjd Punches e.g. a 20 mm hole in 18 mm steel Stroke triggering via foot switch Assortment of tools is included in the price

Condition: new, Hydraulic hole punch model PUMA 55 For punching sheet metal, flat steel and steel profiles Technical data: punching force 550 kN Max. Punching capacity Ø 40 in 10 mm Throat 500 mm Engine power 5 kW Stroke rate with 20 mm stroke 38 /min maximum stroke 60 mm Machine weight at outreach 500: 1150 kg Optional accessories available, please ask for price. Optional extras: Oversized punching unit up to 100 mm complete Base table plate for oversized punching equipment Throat 500 mm Pjdpfx Adefdgh Tonord Laser positioning unit integrated in the downholder Multi-position table For Puma 55 S table size 1000 x 650 mm (see figure 2) Punching device for UNP and INP from 40-80 mm Special die for this Linear rail 2000 mm, complete with 8 tilt stops, Linear punching table with fence ruler and 2 finger stops with console Automatic positioning table Semi Paxy with stop in 2 axes incl. control B&R Table 1000 x 400 mm with B&R control 15" Table 2000 x 400 mm with B&R control 15" (Table can be extended by the meter up to 5000mm) (Figure 3 shows 15" controller) service: Training and instruction incl. travel expenses

Condition: used, Hydraulic press, oil hydraulic press, pressing machine, pressing tool, pressing pliers -Hydraulic press: Hydraulic unit novopress type WK 9483 -Pressure: max. 150 bar / 0.45 l/min -with punch set: 1x Ø 18mm, 2x Ø 14mm, 1x Ø11 mm, 1x Ø 9mm -Operation: foot pedal -Connection hoses: for pressing tongs or similar -Dimensions: 850/550/H1250mm Pjdpfjix Rchjx Adnsrd -Weight: 158 kg

Year of construction: 1997, condition: used, punching force: 1000 kN Podpfxoizuhps Adnsrd mass: 2400 kg Punches e.g. a 40 mm hole in 20 mm steel Stroke triggering via foot switch Including viewfinder for center punching and setting up Assortment of tools is included in the price

Condition: used, Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system Prodpfx Ajfc T Tpodned -2 punching -Punch movable: 215 - 2505 mm -for: small punching work -Foot switch -Dimensions: 3010/930/H1450 mm -Weight: 570 kg

Condition: used, Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system for form folding machine, profiling machine, profiling system, slat production, blinds production -Handover: in the current condition as seen -The punch is without a hydraulic unit but can be supplied at an additional cost -Insert tool -2 punches -both sliding: 500 mm -for small punching jobs Psdjgfwgispfx Adnerd -Dimensions: 1230/2020/H1100 mm -Weight: 986 kg

Condition: good (used), Year of construction: 1991, 1 piece Hydr. hole punch MUBEA type HP 1000 / 760. Year of manufacture 1991 Punching force 100 tons With punching saddle for K 60-K260 and various tools, manually operated linear punching unit (raster rail 4 m) swiveling and digital display, carriage clamping and foot switch Psdpfxetv Hzvj Adnerd Dimensions L x W X H 1930 x 780 x 1980 mm Projection 760 mm Working height 1135 mm Hole 40 in 22 mm Stroke 0 - 70 strokes Number of strokes at full stroke 11 strokes Drive power 8.5 kW Weight 3800 kg 3600 kg Used, ready for operation

Condition: used, Single-column hydraulic press HIDROLIKSAN model C-Type 100 Serial no. C100UT16/16 Year of manufacture: 2016 Pressing force: 100 tons Ram stroke: 400 mm Throat depth: 400 mm Daylight (installation height): 495 mm Table size: 900 x 700 mm Ram area: 900 x 700 mm Max. tool weight: 500 kg Table height above floor: 1,000 mm Max. hydraulic operating pressure: 240 bar Hydraulic tank capacity: 180 liters Rapid approach speed: 30 to 100 mm/sec Pressing speed: 3 to 10 mm/sec Return speed: approx. 100 mm/sec Drive power: 11 kW Power supply: 400 V, 50 Hz - Table and ram with 18 mm T-slots - Operation via two-hand control console or manual control - SIEMENS S7 1200 control with Simatic HMI touch panel - SICK Flexi Soft safety control - SICK light curtain as reach-in protection in safety mode - Programmable ram stroke, pressing force, and stroke speed via control - Pressure and position shut-off - Pressure holding time infinitely programmable Prsdoxf Uqrjpfx Adnsd - Ram equipped with direct linear measuring system - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Approx. 2,496 operating hours - UVV safety for manual loading, last inspection October 2024 Required installation space (L x W x H): 2,300 x 1,700 x 2,750 mm Weight: 8 tons Very good condition

Condition: used, Year of construction: 1999, connected load frequency 220 V rated current 263/152 weight of the machine ca. 1 t Predpfxsvvx E Sj Adnsd

Condition: good (used), Year of construction: 1991, machine/vehicle number: 4073756691005, Offer 25360 Technical Data: - Sheet and flat bar shear, blade length: 175 mm - Cuts flat steel up to 100 x 15 mm or up to 150 x 10 mm - Profile and bar shear: - Cuts angle steel up to 80 x 8 mm - Cuts round steel up to 32 mm - Cuts square steel up to 30 mm Prjdpfx Adexupvbsned - Punching station: - Punching force: 360 kN - Stroke: 10 to 32 mm - Throat depth: 155 mm - Punches steel up to 20 mm Ø in 14 mm - Or up to 27 mm Ø in 10 mm - Drive: 400 V / 3 kW - Foot pedal - Space requirement approx. W 800 x H 1600 x D 855 mm - Weight approx. 600 kg - Various punch and die sets included

Year of construction: 1966, condition: used, functionality: fully functional, machine/vehicle number: 562-66280, Hydraulic bridge punching cq cutting machine with forward and backward moving upper platen. Working area 600 x 2000 mm. Max oil pressure per cylinder 400 bar with a diameter of 185mm = 107 tons per hydraulic cylinder Guaranteed pressure force regardless of load location 100 tons Dimensions of the machine 320 x 170 x 190 cm Weight 4,500 kg Pjdpfx Adoud Rhvenjrd Machine is without oil; which has been drained upon removal All electrical documentation is complete; even warranty certificates for the Sick photocells from 1970 !

Condition: used, pressure 100 t punching cross-cut in cmm Ø 31 in 25 mm stroke 10 - 50 mm column arm 510 mm work height max. 1100 mm no. of strokes 14 - 45 Hub/min punch diameter max. Ø 90.0 mm oil volume 103 l total power requirement 7.5 kW weight of the machine ca. 2400 kg. range L-W-H 1750 x 1020 x 2050 mm maintained condition (!!) New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation Predpfsxabrfjx Adnod - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual

Year of construction: 2006, condition: excellent (used), Punching capacity in sheets at 37 kg strength up to: 2 and 3 mm Poded D Ryfspfx Adnsrd with various punching tools

Condition: used, Single-column hydraulic press, straightening press, punching frame ECKOLD Pedsd Swtaspfx Adnerd Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. throat 125 mm ram stroke 35 mm Table size 280 x 210 mm Plunger surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Plunger surface with 4 M16 threads and 20 mm guide groove, central centering hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: used, Year of construction: 1988, 220 V frequency 50 Hz combination machine ja extensive accessories ca. 50 Sätze Prjdpfx Aendz Npjdned pressure 50 t

Condition: new, Metallkraft HPS 45 S Hydraulic sectional steel shear/hole punching machine (3819045). Combined machine with up to 5 processing stations and foot operation. DESCRIPTION - Punching station, flat steel shear, angle steel shear, section steel shear, from HPS 45S with notching station - DS-series with two working cylinders and two foot pedals for simultaneous working with punching station and section steel shear - Stepless adjustment of the stroke - Larger throat for punching station with 620 mm optional, from HPS 55DS available - Heavy and stable welded construction - From HPS 45S with notching knife as standard equipment - With powerful 400 volt motor - V-notching knife, oversized punching device and larger throat for punching station available on request - Two-stage foot pedal for inching operation - Standard with MUBEA holder for punch no. 1, no. 2 and no. 3 as well as die no. 30, no. 45 and no. 60, use of punch and die no. 4 and no. 80 optional (except HPS 40S) Advantages of punching compared to drilling: - High time saving - cycle times - No chips - No cooling Notice: All hydraulic section shears are supplied with oil TECHNICAL DATA Dimensions and weights length (product) approx.: 1500mm width/depth (product) approx.: 950mm Height (product) approx.: 1680mm Weight (net) approx.: 1400kg Notching station Notching station material thickness max.: 8mm Notching width max.: 35mm Notching depth max.: 75mm V-notching tools (accessories): 100 x 100 x 8mm Electrical data Power drive motor: 4kW Supply voltage: 400V Mains frequency: 50Hz Flat steel shear Flat steel shear material width x thickness max: 200 x 15mm Flat steel shear material width max x thickness: 300 x 12mm flat steel shear blade length: 316mm Flat steel shear angle cut 45° side length max. x thickness max: 80 x 10mm Flat steel shear working height: 955mm Punching station Punching pressure: 45t Punching station diameter x sheet thickness max: (steel 400 N/mm²)22 x 15mm Punching station diameter max. x sheet thickness: (steel 400 N/mm²)38 x 8mm Punching station throat: 175mm Punching station stroke max: 50mm Punching station stroke rate: 20/min Punching station working height: 955mm Steel bar shear Steel bar shear capacity round material: 30mm Steel bar shear capacity square material: 25mm Angle steel shear Angle steel cutter cutting capacity 90° L profile: 100 x 100 x 10mm Angle steel cutter cutting capacity 45° L profile: 70 x 6mm Angle steel shears cutting capacity U-I profile (accessory): 80 x 45mm Angle steel shears cutting capacity T profile (accessory): 40 x 5mm Angle steel shear working height: 1140mm SUPPLY - Punching station - Flat steel shears - Angle steel shear - Sectional steel shears with round and square blades Prsdpfx Askzk Hvodned - notching station - punch holder with bayonet lock - punch and die reducers no. 1, no. 2, no. 3, no. 30, no. 45 and no. 60 - Punch, flat steel cutter and notcher with adjustable stops - hook wrench - foot pedal - hydraulic oil Made in Turkey OTHER MODELS PLEASE REQUEST

Condition: new, punching pressure 28.0 t punching cross-cut in cmm 31 in 7.0 mm ST throat 250 mm dayligth 223 mm no. of strokes 10 - 30 Hub/min oil volume 32.0 ltr. work height max. 1033 mm total power requirement 3.0 kW weight of the machine ca. 553 kg dimensions of the machine ca. 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable Predpfxjw U U S Nj Adnod - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Condition: new, Hydraulic, mobile hole punching machine model PP50 For punching sheet metal, flat steel and steel profiles Technical data: punching force 500 kN Max. Punching capacity Ø 27 in 13 mm Throat 130 mm Engine power 2,2 kW Stroke rate with 20 mm stroke 25 min maximum stroke 30 mm Weight 295 kg Predpfx Ajfdgidodnod Standard version or press version available