Used Hydraulic Punching Machine for sale (90,495)

Condition: good (used), Year of construction: 1991, 1 piece Hydr. hole punch MUBEA type HP 1000 / 760. Year of manufacture 1991 Punching force 100 tons Nwjdpfjtv Hzvsx Ad Ajp With punching saddle for K 60-K260 and various tools, manually operated linear punching unit (raster rail 4 m) swiveling and digital display, carriage clamping and foot switch Dimensions L x W X H 1930 x 780 x 1980 mm Projection 760 mm Working height 1135 mm Hole 40 in 22 mm Stroke 0 - 70 strokes Number of strokes at full stroke 11 strokes Drive power 8.5 kW Weight 3800 kg 3600 kg Used, ready for operation

Condition: used, Year of construction: 1999, connected load frequency 220 V rated current 263/152 Nodpfx Aevvx E Ssd Aswp weight of the machine ca. 1 t

Condition: good (used), Year of construction: 1991, machine/vehicle number: 4073756691005, Offer 25360 Technical Data: - Sheet and flat bar shear, blade length: 175 mm - Cuts flat steel up to 100 x 15 mm or up to 150 x 10 mm - Profile and bar shear: - Cuts angle steel up to 80 x 8 mm - Cuts round steel up to 32 mm - Cuts square steel up to 30 mm - Punching station: Nedpfsxupvbjx Ad Ajwp - Punching force: 360 kN - Stroke: 10 to 32 mm - Throat depth: 155 mm - Punches steel up to 20 mm Ø in 14 mm - Or up to 27 mm Ø in 10 mm - Drive: 400 V / 3 kW - Foot pedal - Space requirement approx. W 800 x H 1600 x D 855 mm - Weight approx. 600 kg - Various punch and die sets included

Year of construction: 1966, condition: used, functionality: fully functional, machine/vehicle number: 562-66280, Hydraulic bridge punching cq cutting machine with forward and backward moving upper platen. Nwjdpfxjud Rhvs Ad Aep Working area 600 x 2000 mm. Max oil pressure per cylinder 400 bar with a diameter of 185mm = 107 tons per hydraulic cylinder Guaranteed pressure force regardless of load location 100 tons Dimensions of the machine 320 x 170 x 190 cm Weight 4,500 kg Machine is without oil; which has been drained upon removal All electrical documentation is complete; even warranty certificates for the Sick photocells from 1970 !

Condition: new, Hydraulic, mobile hole punching machine model PP50 For punching sheet metal, flat steel and steel profiles Technical data: Nodpfx Asfdgided Ajwp punching force 500 kN Max. Punching capacity Ø 27 in 13 mm Throat 130 mm Engine power 2,2 kW Stroke rate with 20 mm stroke 25 min maximum stroke 30 mm Weight 295 kg Standard version or press version available

Condition: like new (used), functionality: fully functional, Hydraulic punching machine Brand: Boschert Model: Ecco Line EL 500 Digital Features: Punching force: 28 t Work table dimensions (width x length): 500 x 1000 mm Maximum sheet thickness: 6 mm (up to a punch diameter of 40 mm) Maximum die diameter: 105 mm (up to 1 mm sheet thickness) Njdpfxern Swko Ad Aswp Maximum number of strokes: 180 strokes/min Switch-on value: 5 kW Voltage: 3 x 400 V / 50 Hz Total weight: 2 tons Dimensions of the EL-500-Digital punching machine (length x width x height): 2400 x 1580 x 1540 mm Tool cabinet, 4 tool drawers Foot pedal Includes all the accessories shown in the pictures.

Condition: used, Year of construction: 1988, 220 V frequency 50 Hz combination machine ja Nodpfx Aondz Npjd Aowp extensive accessories ca. 50 Sätze pressure 50 t

Condition: used, Punching machine Bograma Description: Nwodpfx Aexlr Nrjd Ajp - Standard equipped

Condition: good (used), Press machine, hydraulic press, used machine Manufacturer: SEJFO Nwjdpst A U Irjfx Ad Aep Model: 7051-3 Overall dimensions: 800 x 1400 x 2480 mm Weight: 996 kg Stroke length: 300 mm Maximum hydraulic pressure: 140 Bar Year of manufacture: 1997 Hydraulic power supply: 380 V; 50 Hz

Condition: good (used), Grafcut G73H Hydraulic Paper Cutting Guillotine Machine in very good condition. The machine was operated in a digital printing house, with low mileage. Description: • LCD touchscreen programmer (100 programs, each with 100 steps) • Hydraulic knife and pressure drive • PLC-controlled feed • Illuminated cutting line • Stainless steel-covered tables • Additional manual knob for moving the feed beam • Mechanical foot pedal for pressure adjustment Nsdsxmvawspfx Ad Ajwp • Pressure force adjustment • Side tables • Photocells protecting the work area • Safety features: knife stop control at top dead center, two-handed operation, rear table guard • Air table • Quiet operation The machine is equipped with all safety devices and guards, and meets CE standards.

Condition: good (used), Hydraulic guillotine EBA 5560 A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, intuitive and simple operation and at the same time the parameters of a large industrial machine. The device worked in an office, it is the latest product of the German manufacturer Ideal. Year of production 2018. Control: 99 programs, each 99 steps Nwjdpowunldofx Ad Ajp data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with stepless speed regulation of the rear limiter switching mm/inch Hydraulic knife and pressure beam drive Photocells cutting line Technical data: Cutting length 550 mm Infeed height 95 / 92 – with a strip under the beam Infeed depth 570 mm Front table depth 460 mm Minimum final cut 32 / 60 mm – with a strip Power supply 230 V / 50Hz Power 1.5 kW Weight 369 kg Dimensions 1520 x 1400 x 1370 mm

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 4203773681008, table length: 1,400 mm, table width: 600 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the machine within the specified period from 28/07/2025 to 31/07/2025. Nedpjwvi N Tsfx Ad Aowp TECHNICAL DETAILS Table dimensions: 1,400 x 600 mm Motor: 11.4 kW MACHINE SPECIFICATIONS Overall width: 2,500 mm Overall length: 2,200 mm Overall height: 2,000 mm Total weight: 1,500 kg Operating voltage: 380 V Frequency: 50 Hz Rated current: 25 A Control voltage: 220 V with transformer Auxiliary voltage: 24 V Breaker rated short-circuit current: 0.165 kA Documents and Numbers Control number: 42037.301.01.00 Wiring diagram: 42037.301.01.01 Serial number: 42037.736.81.008

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,871 h, General Data Measurements width 2500 mm Measurements depth 8500 mm Measurements height 2500 mm Machine weight 20000 kg Injection Unit Screw diameter 40 mm Injection pressure 2400 bar Screw speed 300 r/min Adjustable heating zones 5 Nozzle pressure 68 kN Clamping Unit Clamping force 7000 kN Opening stroke 1250 mm Max open daylight 1700 mm Mould height min 450 mm Mould height max 1150 mm Ejector stroke 300 mm Nwedpfxexzvq So Ad Aop Ejector force for / back 180 kN This Engel E-Duo 740H-740L-700 combi was manufactured in 2017. A robust hydraulic injection moulding machine, it features a system size of 8.5 m x 2.5 m x 2.5 m and a total weight of approximately 20,000 kg. It includes dual 3-zone screws and 32 hot runner control circuits. Consider the opportunity to buy this Engel E-Duo 740H-740L-700 combi. Contact us for more information. Application Types Injection Moulding

Condition: used, Pneumatic C-frame press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Pneumatic press Serial No. 3437 Year approx. 1990 Pressing force 3.0 tons at 6 bar Pressing force 2.6 tons at 5 bar Nedpfx Asw A Srwjd Ajwp Pressing force 2.2 tons at 4 bar Pressing force 1.6 tons at 3 bar Pressing force 1.0 tons at 2 bar Throat depth 150 mm Power stroke 6 mm Approach stroke 50 mm Total stroke 56 mm Ram surface Ø 100 mm Tool holder Ø 12 mm Maximum installation height 180 mm Table size 200 x 200 mm Compressed air requirement max. 6 bar - Pneumatic power cylinder with mechanical force amplifier (wedge-lever principle) - Press cylinder height-adjustable on column via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Space requirement (L x W x H) 440 x 230 x 750 mm Weight 127 kg Good condition

Condition: used, Year of construction: 1987, functionality: fully functional, table length: 950 mm, table width: 910 mm, pressing force: 80 t, overall weight: 16,500 kg, punching force: 80 t, Max. Pressing Force: 80 tons / 800 kN Stroke Rate: Max.: 1000 strokes/min Min.: 100 strokes/min Mains Voltage: 440 V Mains Frequency: 50 Hz, 60 Hz Power Consumption: 43 kW Control Voltage AC: 24 V Compressed Air Connection: 6–10 bar Stroke Adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm Nedsxzr Ruopfx Ad Aowp Ram Adjustment: 76 mm Average Upper Tool Mass: 600 kg Max. Tool Width: 970 mm Clamping Area Table: L–R: 950 mm F–B: 910 mm Clamping Area Ram: L–R: 760 mm F–B: 510 mm Max. Tool Width (L–R): 970 mm Strip Feed Height: Max.: 160 mm Min.: 70 mm Strip Feeder (left) Bruderer BBV 202/120 Max. Strip Width: 202 mm Feed Length: 0–120 mm Table Opening: L–R: 920 mm F–B: 320 mm Machine Dimensions: Length: 2834 mm Width: 1742 mm Height: 3460 mm Total Weight with 1× BBV 202: approx. 17,500 kg Control Cabinet Dimensions: Length: 1200 mm Width: 500 mm Height: 1025 mm Weight: approx. 250 kg The sound enclosure is not included in the offer but can be purchased separately. In-stock offer also includes numerous other models of Bruderer, Schaal, Mabu, and Bihler presses as well as decoilers and straightening machines.

Condition: excellent (used), Year of construction: 1986, plate thickness 5 mm sheet width 40 mm Nedpfx Adsxzk I So Ajwp

Condition: good (used), Year of construction: 1998, functionality: fully functional, The machine is powered and can be inspected at any time. X working range max.: 3000 mm Y working range max.: 1500 mm Operating hours: 54,239 h. Controller: TRUMAGRAPH Standard equipment: - Ball tables - Safety light curtains Nodpfxsxy Ru As Ad Aowp - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - 360° mono tool holder - Programmable hold-down - Punch slug extraction - Tool spray lubrication - Parts chute 500 x 500 mm

Year of construction: 2021, condition: good (used), Die-Cutting and Embossing Machine Nsdpfxjvxu Smo Ad Aowp Manufacturer: Heidelberg Model: Promatrix 106 CS Year of manufacture: 2021 Sheet size min.: 300 x 350 mm Sheet size max.: 760 x 1,060 mm Maximum machine speed: 8,000 sheets/h Maximum die-cutting pressure: 2.6 MN / 260 t Materials and pile height (incl. pallet) Paper min.: 90 g/m2 Cardboard / solid board max.: 2,000 g/m2 Corrugated board max.: 4.0 mm Feeder pile height: without Non-Stop max.: 1,500 mm in Non-Stop operation max.: 1,200 mm Maximum feeder pile weight: 1,500 kg Without blanking station Without MasterSet 251125ä

Condition: ready for operation (used), Year of construction: 2021, Main Drive Number of axis 3 Nedpfxoxzvrcs Ad Aewp Clamping Unit Clamping force 1300 / 1600 / 2000 kN Additional Equipment Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 2000 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, machine/vehicle number: SA9FT3A50MH17xxxx, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20727 Specifications: EU-approved until 07.05.2026 Model year: 2021 Tires: See photos Hydraulic loading ramps Manual widening Length: 1,095 cm Width: 254 cm Axle distance: 514 / 136 cm Curb weight: 7,000 kg Tool compartment included Description:EU-approved and ready for immediate operation.Equipped with hydraulic loading ramps and manual widening.Available for quick delivery. Technical approved: Yes EU-approved until: 07.05.2026 Own weight: 7000 Total Weight: 28000 Payload: 21000 Width: 254 Length: 1095 Nedowvy Rzjpfx Ad Aowp Model: m/ hydrauliske kjørebruer

Condition: new, The Hydraulic Tube Bender 1/2 is a compact and mobile Tube Bending Machine designed for bending steel tubes of larger diameters with a powerful manual hydraulic pump. This machine boasts a capacity of 10 tons and comes complete with dies for commonly used tube dimensions, allowing you to create bends of up to 90 degrees. With its robust 3-leg stand and 6 bending segments, it ensures stability and ease of use during operation. The included attachments cater to various diameters, making this versatile tool ideal for your tube and profile processing needs. You can efficiently bend tubes while enjoying the benefits of its portable design. If you require a reliable Tube Bending Machine, consider the Hydraulic Tube Bender 1/2 from KNUTH to enhance your workshop capabilities. Don't hesitate to request a quote today! Nsdpfxouzlh Ie Ad Aswp

Year of construction: 2008, operating hours: 24,490 h, condition: ready for operation (used), General Data Machine weight 13000 kg Measurements height 2082 mm Control Unit Brand AMADA Model AMNC-F Dimensions Machine Length 4165 mm Main Drive Nsdpfx Adjxzlr Se Aowp Punching force 200 Kn This AMADA AC2510 NT was manufactured in 2008. It features a punching force of 200 kN and a turret capacity of 51 stations. It can handle sheet sizes up to 1270 × 5000 mm and thicknesses up to 3.2 mm. The machine supports a maximum sheet weight of 150 kg and offers high-speed turret indexing. If you are looking to get high-quality punching capabilities, consider the AMADA AC2510 NT machine we have for sale. Contact us for more information. Application Types Punching

Condition: used, machine/vehicle number: WMM000000V004xxxx, Year of construction: 1997, Please contact ATS Norway for more information Please provide reference number upon request: 19250 Specifications: Nwedpfjv U S Rrjx Ad Aep - 3 axle - Turn on 1 - Hydraulic bridges - Good tires - 10 tonne axles - Ready for delivery Description: Mueller Machine towing from 1997. Trailers need a bit of maintenance against rust and dirt. Hydraulic brakes and good tyres. Ready for delivery. Technical approved: no EU-approved until: 31.01.2018 Own weight: 6100 Total Weight: 30000 Payload: 23900 Width: 252 Length: 1045

Condition: ready for operation (used), Year of construction: 2004, Clamping Unit Clamping force 1100 Kn This Engel Duo 11050/1100 WP was manufactured in 2004. It is a hydraulic injection moulding machine with a clamping force of 1100 Kn. Consider the opportunity to buy this Engel Duo 11050/1100 WP hydraulic injection moulding machine. Contact us for more information. Nedpfx Asxzlv Djd Aswp Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 21000 kg Main Drive Punching force 300 Kn Number of axis 2 Nwedpfsxy Ap Eox Ad Aop Table Table load 160 kg Control Unit Brand FANUC Movement X-Axis Movement 2500 mm Y-Axis Movement 1525 mm This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. Application Types Punching