Used Wooden Blinds Punching for sale (4,513)

Condition: used, Punching machine Bograma Description: Kjdpfx Ahsxlr Nrevjlp - Standard equipped

Condition: ready for operation (used), Year of construction: 2000, operating hours: 34,744 h, functionality: fully functional, machine/vehicle number: 258 032, overall weight: 11,500 kg, punching force: 20 t, positioning accuracy: 0.07 mm, tool diameter: 89 mm, TECHNICAL DETAILS Machine capacity: 196 kN (20 t) Kodpfx Ajyn Nybshvslp Air pressure: 5 bar Air consumption: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travel Ranges Machine travel range without repositioning: 1,250 mm x 2,000 mm Machine travel range with 1 repositioning: 1,250 mm x 4,000 mm Machine travel range with 1 repositioning and 1 turning: Turning not possible Processing Max. sheet thickness with ball table: 6 mm Max. sheet thickness with brush table: 3 mm Max. table load: 100 kg Precision Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Control and Axes Pneumatic clamping devices: 2 Number of simultaneously controlled axes: 3 (X, Y, C) Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling work cycle, feed 1 mm: X920 / Y920 Tooling Minimum programmable increment: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Amadex stations: 2 x 11 1/4" + 1 x 2" MACHINE DETAILS Connected load: 30 kVA Operating hours: 53,497 h Cutting hours: 37,808 h Dimensions & Weight Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 Kodpfexwp Nyjx Ahvslp - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: new, pressure 55 t hole diameter in sheet thickness Ø 40 in 10 mm throat 500 mm stroke 60 mm 38 /min. engine output 5 kW 20x20 mm 28x11 mm Overall size 1500x1100x2000 mm weight of the machine ca. 1.150 kg Accessories / equipment: Kjdjyv Nxhspfx Ahvolp - punching table

Condition: new, pressure 55 t hole diameter in sheet thickness Ø 40 in 10 mm throat 750 mm stroke 60 mm 38 Hub/min engine output 5 kW Kledpsyv Nl Usfx Ahvjp weight of the machine ca. 1.885 kg Overall size 1500x1100x2000 mm Accessories / equipment: - punching table

Condition: new, 500 kN hole diameter in sheet thickness Ø 27 in 13 / Ø 28 in 10 mm no. of strokes 23 Hub/min throat 130 mm stroke 30 mm total power requirement 3 kW weight of the machine ca. 295 kg Overall size 1100x900x1550 mm Standard equipment: - punching table Klodpfx Aoyv Nc Hshvjp

Condition: used, Year of construction: 1995, pressure 110 t Ø 40x20 mm 750 no. of strokes 28 Hub/min work height max. 990 mm Machine No. 9557 Kedpfx Aheyv N Rqjvelp weight of the machine ca. 3.400 kg dimensions of the machine ca. 2300x1300x2300 mm

Condition: used, Year of construction: 1989, pressure 50 t throat 610 mm total power requirement 7,5 kW Kledpfx Aheyv Nvajvop machine weight ab. 1700 kg dimensions 1500 x 650 x 1700 mm

Condition: used, pressure 40 t throat 175 mm work height max. 1055 mm stroke 30 mm sheet thickness - max. 8 mm total power requirement 4 kW Kedsyv Nuiepfx Ahvelp weight of the machine ca. 1020 kg dimensions 910 x 670 x 1930 mm

Condition: used, Year of construction: 2006, Pressing force 100 t diameter 40 mm throat 760 mm total power requirement 8,5 kW weight 3.600 kg Accessories / equipment: - punching table Kedpeyv Nrzefx Ahvslp

Condition: used, Year of construction: 2000, Pressing force 28 t X-axis 2000 mm Y-axis 1000 mm Ksdpeyv Nnpefx Ahvolp machine weight ab. 11000 kg

Condition: used, Year of construction: 1998, Punching capacity 165 kN working area 2070 x 1280 mm plate thickness 6,4 mm control CC 220 workpiece weight 150 kg punch diameter 76,2 mm 80 m/min 55 m/min Klsdpeyv Ng Ejfx Ahvep weight of the machine ca. 8000 kg

Condition: used, Year of construction: 2000, pressure 100 t throat 620 mm stroke 0-100 mm hole diameter in sheet thickness 40 in 20 mm no. of strokes 49 Hub/min total power requirement 15 kW weight of the machine ca. 3.500 kg Klsdpfx Aoyv Ncyohvop

Condition: excellent (used), Universal clamping pad set in a wooden box -Design: Interlocking like steps. For use in pairs. Individual supports can be used in conjunction with clamping iron no. 372000. -Support height 22 to 208 mm. -Material: Heat-treated steel, painted -Scope of delivery: Item No. 372200 4 pairs size 1 4 pairs size 2 2 pairs size 3 including wooden box -Weight: 8 kg Kjdpfx Aob A Rgpehvslp

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: Stroke 20 mm -Hole Ø 50 mm -Sheet width: up to 993 mm -Punch dimensions: 96 cutouts 22 x 3.5 mm -Individual components: see photos -Dimensions: 1400/820/H380 mm -Weight: 732 kg Ksdpfsyv Aptjx Ahvslp

Condition: new, Year of construction: 2024, TP turret punch presses With Durma TP series punch presses, you can achieve top quality with precise and fast turret, improved hydraulics and 3 automatic index stations. With movable platen, part unloader, automatic clamps, Cad/Cam software and control unit, Durma turret punch presses are easy to use. With automation systems that increase both work safety and productivity, user safety is also increased while reducing wasted time. Punching force: 30 tons Working area: 3.000+R x 1.500 mm X-axis movement: 3.000+R mm (repositioning) Y-axis movement: 1.500 mm Y-axis speed: 60 m/min X-axis speed: 70 m/min Klsdog Admfepfx Ahvop speed combined X+Y: 92 m/min max. stroke rate (in 1 mm steps, 1 mm sheet thickness): 1,100 1/min max. stroke rate (in 25 mm steps, 1 mm sheet thickness): 325 1/min max. marking speed: 1.200 1/min. main cylinder stroke: 40 mm max. punching stroke: 25 mm max. cutting capacity with fixed tool station steel: 6 mm max. cutting capacity with fixed tool station NiRo: 3 mm max. cutting capacity with index station Stah: 3 mm max. cutting capacity with index station NiRo: 1,5 mm Tool changer (27 stations without tool and holder): 11 x A-station fix: 0,8-12,7 mm 11 x B-station fix: 12,8 - 31,7 mm 2 x C-station fixed: 31.8 - 50.8 mm 1 x D station fixed: 50.9 - 88.9 mm 3 x D-station index: 50.9 - 88.9 mm Positioning accuracy: +/- 0.1 mm Repeating accuracy: +

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Punching force 35 tons Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Motor power 1.5 kW Kljdpfx Ahsyvvkwevsp Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: used, Fully Automatic Riveting Machine, Riveting Automation, Blind Rivet Automation Blind Riveting Machine, Riveting Tool, Rivet Gun with Feeder System Blind Rivet Setter, Press Device Manufacturer: GESIPA Model: GAV 7000 Device No.: 5243052 Year of manufacture: 2002 Blind rivets up to Ø 5 mm for standard materials Blind rivets up to Ø 6 mm for aluminum Setting head diameter max. 11.4 mm Rivet shank length max. 25 mm Setting force of rivet gun 11,770 N Setting stroke 16 to 20 mm Operating pressure 6 to 7 bar Rivet gun weight 2.5 kg Power supply 230 Volt, 50 Hz. - GESIPA Automatic Rivet Gun - Hydropneumatic force multiplier integrated for hydraulic rivet gun - Rivet gun equipped with Ø 2.3 mm mouthpiece for approx. Ø 4 mm pop rivets - Bowl feeder SORTIMAT, Type SM 200/280 - Spent mandrel collection container, 3.5 liters - Hose pack length approx. 3.7 meters - Riveting unit with jib assembly on an aluminum system profile base frame - Base frame is mobile on 4 swivel castors with brakes - Jib made of aluminum system profile with pivotable arm (Height = 2800 mm, Arm = 1250 mm) - BALANCER BILANCIATORE (1-3 Kg) for the rivet gun - Various accessories such as wear parts e.g. jaw sets, etc. - Operating manual Required space Length 80 cm x Width 43 cm x Height 280 cm Weight of rivet unit without base 90 kg Weight of rivet unit with base 150 kg Good condition Kjdjyvvkkopfx Ahvjlp Operating Principle – The system operates fully automatically and is designed for high cycle rates: 1. Vibratory Feeder: The blind rivets are filled into a vibratory bowl at the top of the control unit. From there, the rivets are conveyed into the feed hose. 2. Automatic Feeding: When the trigger is actuated, the next rivet is pneumatically blown into the setting head and positioned. 3. Mandrel Collection System: The spent mandrel is extracted into a collection container in the control unit via a vacuum system. Sensors monitor the fill level of the container. 4. Monitoring: An electronic control system monitors all critical functions and displays operation statuses – for example, an empty rivet supply.

Condition: good (used), Year of construction: 2011, operating hours: 87,995 h, functionality: fully functional, X working area max.: 3000 mm Y working area max.: 1500 mm Machine - Working area 3000 x 1500 mm - Rigid, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear magazine with 18 tool stations incl. 3 clamps - Drives with maintenance-free three-phase motors - Repositioning device with programmable hold-down - Ball tables - Part chute 500 x 500 mm - Good parts bin - Chip container - Automatic shut-off - Initial oil fill - Transport and installation device Punching head - Hydraulic punching head - Rotatable mono tool holder - Manually adjustable hold-down force - Programmable hold-down - Tool length compensation Kedpfx Ajyvugqshvelp - Punch pin spray lubrication - Slug extraction - Forming Control - Open control based on Siemens Sinumerik 840D - Operator panel with 12" TFT color display - Program management - Integrated technology data - Remote teleservice via Internet - Integrated e-shop Programming - Shopfloor programming based on TruTops Punch Basic - Easy programming Data transfer - USB interface and network connection Safety - CE marking - Multi-beam safety light curtains - Hydraulic quick-stop - Sheet bulge detection - MultiTool function - MultiShear function - MultiBend function - Thread forming function - Engraving function - Deburring and roller technology - Marking/rapid bead function - MultiShear function - Adaptive stroke calibration - Spray lubrication for die - Active die - Additional clamp - Individually opening clamps - Repositioning cylinder - Sensor for part chute - Vibration-damped installation - Sheet bulge detection - Chip conveyor with tilting container - Brush tables with loading and unloading aids - Ejector device for small parts Automation SheetMaster Standard features: - Peeling suction unit - Vacuum sensors - Central lubrication - Sheet thickness measuring device for double sheet detection - Automatic clamp closing - Modular suction plate - Simultaneous loading and unloading during main time GripMaster - Scrap skeleton tongs with sensors - Scissor lift table 400 mm - Scrap skeleton pallet tiltable 1250 x 2500 mm ToolMaster 40 - Simultaneous operation for ToolMaster SortMaster Pallet L2

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Kjdex U Eiaopfx Ahvolp Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: good (used), functionality: fully functional, Year of construction: 2019, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser hours: 980 h, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Machine - C-frame - Coordinate guide - Linear magazine with 25 stations for clamps and tools - 4 x hydraulic clamps - Drives with maintenance-free three-phase motors - Repositioning system with programmable hold-down - Flap for punched parts 500x500mm incl. sensor - Foot pedal for closing clamps - FocusLine - NitroLine - FastLine - FlyLine - Additional XP and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500x500mm incl. sensor - Liftable laser cutting support TRUMPF Laser - TruFlow 4000 laser incl. LensLine and optimized standby - High-frequency excitation Ksdpfsyu S D Asx Ahvslp - Fine filtration of compressed air for beam tube ventilation - Closed beam guidance Cutting Head - Lens cutting head with 170mm focal length - Universal quick-change device for cutting head - LensLine - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch slug extraction - Calculation of fill level in the punching console - Stroke counter for punches - Spray lubrication for punches - Fill level monitoring for tool lubrication - Stripper position measuring system with sheet thickness measurement function Control System - TRUMPF control based on Rexroth IndraMotion - Touch panel with 19" TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote Support interface - Automatic shut-off with wake-up function - Production planner Functions - PlasmaLine Data Transmission - USB interface - RJ-45 network interface - Wireless Operation Point Safety - CE marking - Two-beam safety light barrier - Monitoring system for gas pressure, temperature and cooling water - Emergency stop for drives - Warp detection - Protection against stray radiation Extended Standard Equipment: - Network installation via Remote Support - Chiller (water-air) - Compact extraction system - 1st locating pin (inside right) - 2 finished parts containers - Chip container - 40 used RTC cassettes + die plate Punch Quality Package - MultiShear - Deburring and rolling technology - Adaptive stroke calibration - StripLine Forming Package - Thread forming incl. thread former breakage control - Marking/fast beading - MultiBend - Height-adjustable clamps - Automatic nozzle changer - MultiTool - Engraving - Smart Punch Monitoring with sheet format detection - 4 individually openable clamps - Automatic clamp closing with mechanical sensor zero stop - Repositioning cylinder - Vibration-damped installation - Chip conveyor with tilting container - Foot pedal start incl. rear-view mirror - Brush tables with loading and unloading support - Ejector unit for small parts - CO2 extinguishing system for compact extractor - Connection piece for exhaust air duct of compact extractor MobileControl App SheetMaster (AK08) UF - Loading station with spreader magnet - Simultaneous loading and unloading during main time - Peeling system incl. positioning aid for oversize formats - Additional positioning aids for medium format - Additional positioning aids for large format - First add-on package with 9 suction cups (incl. vacuum ejector) - Unloading monitoring for laser parts - Loading of blanks GripMaster 4000 x 1500 mm SortMaster Pallet 4 pallets longitudinal ToolMaster Linear 54 stations with simultaneous tool setup during main time - Safety devices for warehouse connection incl. 2nd light barrier circuit - Warehouse interface

Condition: good (used), Year of construction: 2000, Gebruikte pons- en snijlijn van Voortman | CNC-pons- en snijlijn voor platte staven Ksdpfeyu Sq Nex Ahvslp Capaciteit: Plat 500 x 22 mm Vierkant 150 x 150 x 15 mm Inclusief teller Video beschikbaar op aanvraag

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Klodpfx Aexf Utaehvep Good condition

Condition: good (used), Year of construction: 2009, operating hours: 899 h, machine/vehicle number: SN20090545, punching force: 30 t, sheet thickness (max.): 6 mm, table length: 2,000 mm, table width: 1,270 mm, overall weight: 11,000 kg, working range: 40 mm, ERMAK RPP 1270x30 Ton Punching Machine, Year 2009 Brand: Ermak Model: RPP 1270x30 Serial Number: SN20090545 Year: 2009 Main Features: Operating Hours: - POWER ON Hours: 899 hours - Punching Hours: 1 hour 6 minutes - Punching Force: 30 tons - Maximum Capacity: - Sheet Thickness: 6 mm - Sheet Dimensions: 1270 mm (width) x 2000 mm (length) - Travel: 40 mm - Axis Travels: - X-axis: 2000 mm - Y-axis: 1270 mm - Travel speed: - X-axis: 70 m/min. - Y-axis: 70 m/min. Klsdpfx Ahjv S Ufyjvsp - C-axis speed: 100 rpm. - Strokes per minute: Up to 700. - Accuracy: - Positioning: ±0.03 mm - Position tolerance: ±0.1 mm - Numerical control (CNC): GE Fanuc 18i-PB - Oil capacity: 300 liters. - Power: 15 kW - Machine dimensions: - Length: 4250 mm. - Width: 4000 mm. - Height: 2330 mm. - Weight: 11,000 kg.

Condition: excellent (used), Year of construction: 1987, Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Peddinghaus, hydraulic profile steel shear type Peddiworker 400 -Drive: hydraulic -Pressure force: 40 tons -Equipment: large support table with stops for die-cutting, various stamps and dies Kledpfxeyupxwj Ahvjp -Production: Punching, shearing, cutting, pipe notching -Dimensions: 870/660/H1630 mm -Weight: 860 kg