Granulating plants for sale
Your location was not identified (Edit)
|
5
Producer: BIOTECH Type: H710 BIOTECH Gvme98 Production year: 2016 Electric drive motor with 75 kW The weight of the device is 2 500 kg The dashboard is included in the set more
|
|
1
engine output:2,2 kW Feeding opening:200 x 200 mm ginding chamber dimensions:200 x 200 mm 7df8k7azk Number of rotor knives:12 Stk. Number of stator knives:2 Stk. Rotor-Ø:200 mm dimensions:1.300 x 800 x 800 mm weight:ca. 150 kg Applicability:sprue Payment terms: 100% prior to delivery more
|
|
3
Stock - No.: 2393 1 used, partly overhauled and functionally tested strand-pelletizer Brand: RIETER Automatik ( Maag ) type: Primo 200 U Rotor width: 200 mm double bearing hart-metall cutting rotor with vertical cut Dwloie pneumatic roller pressure device drive 7,5 kW with FU speed control noise protected housing The Pelletizer is ready for trial-run with your material, date shorty possible in our workshop Wuppertal Germany, by appointment. More machines as Extruders, pelleti... more
|
|
6
Düren, Germany
18101 km
ready for operation (used)
For sale is a used - hot die face cutter Fk3ohcv The granulation takes place in an air environment and is therefore well suited for non-adhesive materials. A visit is possible. Further information and photos on request. more
|
|
3
Częstochowa, Poland
17266 km
1992
ready for operation (used)
Capacity 700 - 800 kg / 8 hours Bfjrqparaf more
|
|
3
Katzwinkel, Germany
18017 km
1981
ready for operation (used)
Granulate mill Getecha RSF 200A10 Built 10/1981 Machine No. 752 due to production changeover Bfd300fzb7 more
|
|
6
Recycling plant fully Equipped: conveyor belt, metal detector, feed, hot-cut granulation, Be82rbyxev Drainage sieve, drying blower, cyclone more
|
|
5
stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing... more
|
|
|
|
2
Be0ytohffl Recovery equipment for manufacture of pellets consisting of: Eurotecno brand extruder, single screw 90mm, 35D. Degasser without vacuum pump, change hydraulic filters of 165 mm. Head and cutting head under water with centrifugal drying and screening qualifying. 150hp engine, C.A., variable speed 380v. Production of 200-300 kg / hour. more
|
|
15
Manufacturer: FORMTEC BP Model: EXP-3 Year of production: 2008 Technical parameters: Own weight: 10320 kg dimensions: length: 10.1 m width: 4.44 m Height: 6.5 m Engine power: 40 kW Czil2wga Continuous working cycle, double foaming The efficiency was assumed in the range: 1200kg -1800kg Density was appropriately adopted: 15-30 kg Dimensions of the foaming chamber were assumed: fi 1300 - fi 1,600 The valued device is used for the first stage of the production of expanded polystyrene... more
|
|
4
Tatabánya, Hungary
dealership location
17372 km
good (used)
Granulatzufuehrer to the plastic injection molding machine. Manufacturer: CONAIR FRANKLIN Type: DL 12 Engine: 115 V 1 A 60 Hz With built-in scale, but the machine is not complete. Lmhpb more
|
|
6
There are two granulators available, output WPC: 2t/h, hole diameter: 5.3mm, hole layout: 2x16/ 2x19/ 2x22/ 2x25/ 2x28, length: 1100mm, width: 700mm, height: 800mm, with control cabinet, machines were scarcely used. Blcftvla more
|
|
10
TATABANYA, Hungary
17374 km
good (used)
Weight approx.: 500 kg Beaulun2dm Weight filler 330 x 470 mm dimensions: 1500 x 800 x 600 electrical power: 2.2 kW more
|
|
5
Tallarina, brand Automatik, with 300 mm milling cutter, 15 hp (11 kW) motor with AC speed variator. Vyj0msxn more
|
|
3
2 pieces Hopper loaders for regenerated materials and grains at throughputs up to 150/200 kg/h. Manufacturer: Koch Technik Type: A 8 L9fiv Content: 8 l Height: 595/311 mm Weight: 9 kg Year: 1998 more
|
|
2
Tatabánya, Hungary
dealership location
17372 km
good (used)
Granulatzufuehrer to the plastic injection molding machine. Rtha9qk2i Manufacturer: CONAIR FRANKLIN type: DL 12 engine: 115 V 1 A 60 Hz with built-in scale, but the machine is not complete. more
|
|
4
Katzwinkel, Germany
18017 km
ready for operation (used)
Pellet mill ALBIS MK400. 175 Max 16 Amper 3 kW Weight: approx. 230 kg to give due to production Muktms more
|
|
4
Capacity 500 kg/h Drive 4 kW type Strang,strand,spagetti granulator Px77uxpnu material PP,PE,PS,PET,PC,PA div material working width 200 mm more
|
|
10
TATABANYA, Hungary
17374 km
2006
excellent (used)
Manufacturer: Moditec Rk70tynb Weight: 500 kg more
|
|
2
stock-No. 2094 strand-pelletizer AUTOMATIK typ ASG 100 rotor-intake width 100 mm Micro strand-pellet cutting Rotor drive 7,5 kW noise protected housing More strand-pelletizers ex stock available: Scheer, Rieter Automatik, AlphaTec, IPS and more We´re also offering several waterring - and underwater pelletizing units, as ECON, Gala, BKG, Filtec and more. 2sho0rprc Ask for our actual machine-stock-list or/and visit us in Wuppertal-Germany more
|
|
5
THE AGRIFON granulation is used in the production of temperature- and shear-sensitive plastics. It is specially designed for granulating soft PVC, hard PVC, HFFR formulations or compounds for low, medium and high voltage elastomer-based cables. X2f72eq0 more
|
|
|
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Granulating plants
Dealer for Granulating plants
