Used Automatic Welding Machine for sale (93,152)

Condition: good (used), Year of construction: 2021, Automatic machine for the production of PVC tarpaulin covers for tent halls – sold for spare parts. Italian-made welder for tarpaulins by SolarEdge Automation Machines, manufactured in 2021. The machine has seen limited use for manufacturing PVC covers for tent structures. Machine specifications: - Material: PVC with a weight of 450 g/m2 - Material specifications: max. width – 3250 mm, min. width – 285 mm, max. roll weight – 1000 kg, max. external diameter – 600 mm - PVC or PE keder rope with a diameter of 4/5/7 mm - Minimum product length: 1500 mm - Minimum finished product width: 800 mm Godpsx Dk H Tsfx Agboil - Power supply: 400V The machine welds together the surfaces of two material rolls, cuts them to the required width, and thermal-bonds the keder cord to the edges of the material. The machine consists of: - 2 material feeders with automatic material position adjustment - Knives for cutting material to required width - Welding module for joining two pieces of material - Modules for fusing the keder tape to the material edges - Module for feeding and welding the keder cord with automatic tension control - Encoder for product length control - Knife for cutting the product to the set length Welding is performed with high-performance Leister hot air heaters. Components used in the machine: 1. Heaters and blowers by Leister 2. Control systems, electrical and safety components by Omron and Siemens 3. Drives and gearboxes by Seipee and Nidec 4. Pneumatic systems by Festo and SMC 5. Vision system by HIKVISION 6. Linear guides and carriages by HIWIN Machine is only sold as a complete unit!

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 439, AWM Automatic Binder Welder with Additional Post-Heating Type: A.R.M. 400 VS SPECIAL Serial Number: 439 Year of Manufacture: 2011 System Components: 1. Decoiler for longitudinal and frame wires 2. Powered pre-decoilers 3. Radial loop 4. Straightening and bending machine Giodpfoxcbc Aex Agbjl 5. Binder feeding and welding (including additional longitudinal wires) 6. Binder stacker Wire diameters for production: - Lower longitudinal wires: 6, 8, 10, 12 mm - Upper longitudinal wires: 8–10 mm Diagonal pitch: 200 mm Binder height: 100–200 mm Location: Konarzyce (Książ Wielkopolski) AWM Automatic Lattice Girder Welding Line Type: A.R.M. 400 VS SPECIAL Serial Number: 439 Year of Production: 2011 Line Components: 1. Decoilers for longitudinal and frame wires 2. Powered pre-decoilers 3. Radial loop 4. Straightening and bending machine 5. Binder feeding and welding (including additional longitudinal wires) 6. Binder stacker Wire diameter for production: - Lower longitudinal wires: 6, 8, 10, 12 mm - Upper longitudinal wires: 8–10 mm Diagonal pitch: 200 mm Binder height: 100–200 mm Location: Konarzyce (near Książ Wielkopolski) - Poland

Condition: used, Welding turntable – Welding positioner with enclosure Circular welding device Load capacity approx. 50 kg Chuck diameter 300 mm Chuck rotational speed 1.0–15 rpm Power supply 230 Volts, 50 Hz - Spiral scroll chuck with internally stepped jaws - Infinitely variable speed adjustment via potentiometer Gisdpfedzp U Isx Agbol - Drive via geared motor, rotation direction left - Start via electrical switch - Welding current transmission via slip ring contact - Extraction connection Ø 160 mm - Internal lighting Door opening W x H 715 x 1060 mm Internal dimensions W x D x H 780 x 780 x 1100 mm Required space W x D x H 900 x 900 x 2300 mm Weight 190 kg

Condition: ready for operation (used), Technical characteristics Welding machine: Welding of a frame (4 x 90° angles) in one automatic work cycle for the positioning of the profiles and digital positioning of the welding heads Fully automatic evacuation system of the welded frames The machine complies with CE safety standards and the four welding heads are equipped with a cover to ensure perfect protection of the operator All types of profiles (programmed KBE and PROFIALIS) Welding capacity: height 200 mm - width 140 mm Dimensions: inside 150 x 250 mm - outside 3150 x 3600 mm Welding parameters are individually adjustable on each welding head Electronic adjustment and control of the welding parameters on the screen Electronic temperature control of the welding plates and the limiting knives with digital display and alarm on the control panel Automatic adaptation of the welding time to the profile section Compensation system per profile piece to eliminate cutting tolerances (+5 / -2 mm) Perfect bead limitation for white, colored or structured profiles Automation - error-free production File from your frame program, barcode reader "Desired size = welded size" allows for optimized cutting of the panels Possibility to generate a production report per period Machine control by PLC - PC of the latest generation Gsdoundd Hjpfx Agbeil Diagnostic system on screen (text and figures) Deburring machine : All types of profiles and combinations Speed and automation: high precision of the tool guides on 4 axes Automation of the control system Electronic recognition of the profile type Selection of the profile type by means of barcode label or online Automatic detection of crossbars High-frequency motors, adjustable speeds without interval All movements and speeds are adjustable from the control panel Selection of grooving or flat finishing as standard on the machine PLC control - PC of the last generation with INTEL processor Diagnostic system on screen Easy programming of new machining and profiles Power and Motors Overall dimensions

Condition: new, Year of construction: 2024, functionality: fully functional, Automatic Polishing Machine Sanyi SY-T200 year 2024 Gjdpfx Agewcftbjboil The SY-T200 is a closed internal circulation sandblasting machine designed for the surface treatment of hard alloy tool workpieces. It operates using a negative pressure jet blasting method, where compressed air draws in abrasive material to efficiently process surfaces. The machine features an independent dust extraction and filtration system that minimizes dust pollution and allows abrasive reuse, ensuring cost-effectiveness and environmental protection. Its structure includes a working chamber, rotating worktable, spray gun group with lifting mechanism, dust removal system, and electrical control unit.

Condition: used, This is an LSQ5X welding power source from SKS Welding Systems, together with a Weld Process Controller MULTIPROCESS - Q80 and an SKS Frontpull 8 (23°) Gedpfjuxbx Dex Agbsil

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Godpfx Aox N D Ttogbjil Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Year of construction: 2006, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W Gsdpfx Agoxy Hqtsbjil -Dimensions: 520/280/H330 mm -Weight: 7.8 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: MGB1320E, center height: 180 mm, workpiece weight (max.): 100 kg, grinding length: 500 mm, grinding wheel diameter: 400 mm, total width: 14,150 mm, total length: 18,000 mm, total height: 14,750 mm, grinding diameter: 320 mm, workpiece length between centers: 350 mm, grinding wheel width: 50 mm, spindle speed (max.): 3,000 rpm, feed length X-axis: 500 mm, feed length Z-axis: 150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 1 m/min, overall weight: 2,100 kg, workpiece spindle speed (max.): 400 rpm, Equipment: rotational speed infinitely variable, Beijing Second Machine Tool Giedpfx Astr Azkjgbel Beijing Second Semi-automatic High Speed Cylindrical Grinding Machine MBS1320E On-line production equipment; test machine available; roundness within 0.001 beier machine tool works co ltd Online production equipment machine testing available The roundness within 0.001

Condition: new, Year of construction: 2021, New 4 Head Automatic Capper Never Used / New Model RCP-141 Gijdpsv R I D Hefx Agbel To include Capper Feeder, automatic capper

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Giodpfx Asxfrv Eegbjl Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: as good as new (ex-display), Fronius TPS 4000 CMT ✅ Scope of delivery: ➤Fronius TPS 4000 CMT power source ➤Fronius FK 4000 ➤Fronius VR 7000 CMT wire feeder ➤Fronius Robacta CMT hose package or CMT hand hose package Gjdowbixropfx Agbjil ➤Fronius intermediate hose package ~1.5m ➤Fronius RCU 5000i ➤Fronius Interbus Rugged Line interface ➤Ground cable 3-4m ➤Pressure regulator from Messer (new) The prices listed start at ... euros. Prices/offers are customized based on the device configuration. CMT (Cold Metal Transfer) technology is particularly known for its high precision and flexibility when welding thin materials and delicate components. Unlike traditional MIG/MAG welding processes, CMT uses a controlled, pulsating wire feed, which transfers the welding wire very precisely into the weld pool. This minimizes spatter, enables excellent heat input control, and reduces distortion and discoloration of the material. We always have several machines in stock in different versions. Ask for a personalized configuration / additional options. ---- AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Vienna, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the machines? ►►► To explain, we buy like-new used devices, disassemble them, inspect everything, replace any worn parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set, well packaged and insured, on a Euro pallet. ►►► ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately don't have the flexibility to offer a warranty. You are welcome to test the devices on-site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: like new (used), Morgana Autocreaser 33 automatic creaser The device is in very good condition. A modern device that allows you to create a crease (groove), thanks to which we can bend paper or other materials more easily. Sheet size 330x900mm Weight: 400gsm programmer Gedpfxexyvxyj Agboil Weight: 150kg Manufacturer: Morgana, UK Image Creasing: Yes Creased materials: paper, cardboard, cardboard

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Giodpfx Asw Hrrrjgbsl Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Condition: excellent (used), Year of construction: 2011, We are pleased to present for Sale the Automatic transfer system TREC NT from Stork. Manufacturer: Stork Gsdjwdibxjpfx Agbjil Type: TREC NT Year: 2011 Iasbor Igpgstt Shdfor Capacity: 13500bph Condition: Used/Very good

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: width: 200 mm length: 350 mm Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Gsdpfx Aowz Ev Togbjil Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.

Condition: excellent (used), Year of construction: 2012, For sale: PLH Pack Liver Harvester, used but in very good condition. Year of manufacture: 2012 Gijdpfxjtdhtxe Agbjl

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Lamina System Fully automatic laminator FA 1416. Machine with no mileage, in very good technical condition, after total renovation. Machine in motion. It laminates both closed and open cardboard. Max. sheet size: width: 1400 mm length: 1600 mm Ppsbqkzsrit H Roa I Ssu Min. sheet size: width: 200 mm length: 350 mm Top sheet: 130 - 450 gm / m2; Bottom sheet: from 250 g / m2, thickness: 0.6 - 10 mm Gsdpfx Agorit H Rjbsil Automatic substrate feeder with continuous sheet feeding Automatic top sheet feeder The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 3.7 m, length - 10.5 m, height 2.9 m Fitting accuracy

Condition: refurbished (used), Split into 30 bites Weight range: 32-70 g/piece. Adjustable height of rounding space including 3 plastic rounding plates complete gearbox in oil bath 400V - 3 Ph - 50 Hz motor serial motor protection head opened for cleaning condition: very good (after general overhaul) Quantity of dough per tray (grams): 960-2100 Length x width x height (mm): 800 x 690 x 1470 Giedpfx Aott Am Rsgbel Power (kW): approx. 1.6 Net weight (kg): 540

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, control type: CNC control, degree of automation: automatic, Fully automatic swivel bending machine with warehouse integration Manufacturer: TRUMPF Model: TruBend Center 7030 (B34) Year of manufacture: 2022 Control: TecZone Fold programming, touch operation, additional screen TECHNICAL DATA: Max. bending length: 3,123 mm Min. bending length: 200 mm Max. box height: 220 mm Max. component size: 3,120 x 1,500 mm Max. diagonal of component: 3,460 mm Max. material thickness: Steel: 3 mm, Stainless steel: 2.2 mm, Aluminium: 4 mm Min. material thickness: 0.4 mm Min. bending depth (standard tool): 145 mm Min. bending depth (retractable hold-down tool): 30 mm Connected load: 80 kVA Average power consumption: 15 kW Space requirement (L x W x H): 8,348 x 5,113 x 3,345 mm (min. hall height: 4,300 mm) EQUIPMENT: - Front gauge - Loading grippers - Rotating part manipulator - 2-axis part manipulator with vacuum modules Giedpfxox Tii Ie Agbol - 5-axis backgauge - Optical angle assistant - Hold-down tools - ToolMaster - Control unit with foot switch - ACB Laser (Automatically Controlled Bending) - 3-surface vacuum module set - 2-surface magnet module set - Bending tools OBW90 and UBW90 - Retractable hold-down tool ENW - Additional bending tool function ZBW Comprehensive set of various tools included AUTOMATION: - Robot and warehouse interface (use without warehouse requires adaptation) - Loading and unloading unit with warehouse integration (without pallet), including for blank separation - Safety fence, swing doors, light barriers - Unloading table with conveyor system Further information available in the pictures. This used machine can be inspected under production conditions. All information is without guarantee – sale excludes any warranties or guarantees. Subject to prior sale.

Condition: used, functionality: fully functional, Year of construction: 2003, EMAR M111 – Year 2003 Godox Tihdopfx Agbsil SEMI-AUTOMATIC PNEUMATIC CUTTER Electrical power supply: 400 Vac three-phase + neutral, 50 Hz Total absorbed power: 2 kW, 400 Vac, 50 Hz Blade motor: 1.5 kW, 400 Vac, three-phase, 50 Hz Pneumatic power supply: max 6 bar Widia blade size: external Ø 230 mm, bore Ø 32 mm Height: approx. 1250 mm Length: approx. 500 mm Width: approx. 6500 mm Weight: approx. 200 kg

Condition: good (used), Year of construction: 2019, operating hours: 11,000 h, functionality: fully functional, Cloos laser welding system in 2-station operation with automatic shuttle system for loading and unloading. Kemper extraction system. Safety technology. Giedjugv H Nepfx Agbol Lifting weight of the turning devices per station 2000 kg. Technical data see description, chapter 2 System is available from October 2024 and has been regularly maintained. Location Germany. Demonstration and inspection possible. Services on request.

Condition: used, Year of construction: 2009, operating hours: 6,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC530, spindle speed (max.): 36,000 rpm, GF Mirkon XSM600U X: 800 Y: 600 Z: 500 A: +30/-100 degrees C: 360 degrees continuous HSK50 spindle: max. 36,000 rpm, 25 kW HR410 handwheel 60-station tool changer Rotary table including 3R clamping system Chip conveyor Coolant system with 20 bar internal coolant supply Blum laser tool measurement M&H 3D probe Pallet automation with 21 pallets - the pallets are not included in the scope of delivery This machine is offered on a customer order basis! Gjdpewa R A Nsfx Agbeil

Condition: repair required (used), Year of construction: 2005, functionality: not functional, Automatic stretch wrap machine for loads placed on pallets. Machine requires repair! Missing one stretch film carriage, ASI communication not functioning, and control cabinet incomplete. Gijdpfjxfbfvsx Agbjl Original machine documentation and electrical schematics included. Manufacturer: M.J. MAILLIS GROUP (SIAT) Model: MANCON 1710 Year of manufacture: 2005

Condition: good (used), Year of construction: 2009, machine/vehicle number: 20080229, This is a C-frame welding station Type: 130 MF Machine-No.: 20080229 YEAR OF MANUFACTURE: 2009 U1N: 400V / 50HZ U20: -9V level 1 Gjdpfx Agovgdt Asbsil S1: 58kVA I2p 6.46kA ED 100% S%: 130 kVA ED 20% Fmax: 1140daN at 6 bar I20c: 42.5 kA Q: 18L/min Opening: up to 170mm Projection: 350mm Control cabinet: Machine no.: 20100079