Ameks Holding OÜ

Condition: excellent (used), Year of construction: 2007, System TM High speed automatic bundling system Automatic bundle forming packaging unit possible to combine with other outfeed handling systems available from stock such as buffers and stackers. Gijlhcowmyrgocqnsu Consisting of 1. System TM crossfeed to automatic bundling system. 2. System TM automatic bundling system. 8 bundles per minute. 3. Strapping unit Strapex SMG 65S (Year 2020). 4. Outfeed from strapping unit. Possible to include System TM moulder outfeed and System TM Optistack 6000 stacker also if needed.

Condition: good (used), Weinig Hydromat H23 50mm spindles 6,000 RPM Bottom 15kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Top 15kw jointer ready Bottom 11 kw jointer ready (straight jointer) + outboard bearing Giolhccjwmw Nvsqnju Top 11kw jointer ready (straight jointer) + outboard bearing Bottom 15 kw jointer ready Possible to add additional straight / profile jointers as needed !!! 15kW feed motor. Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: excellent (used), Year of construction: 2001, Weinig Hydromat 23C with 6 Spindles. Separate electrical panel. Separate remote control panel Automatic lubrication system for bedplates Full heavy duty sound enclosure. No 1.  7.5kw - Bottom 6000rpm + Outboard bearing No 2. 7.5kw - Right 6000rpm No 3. 11kw - Left 6000rpm + ATS No 4 . 11kw - Top 6000rpm + Outboard bearing + ATS Gislowmw Npehccqneu No 5 . 11kw - Top 6000rpm + Outboard bearing + ATS No 6 . 15kw - Bottom 6000rpm + Outboard bearing 7.5 kw feed. 6-80m/min 50mm spindles Beam 0.55kW Full documentation included. Possible to supply with hydro tooling if needed. Possible to supply with infeed and outfeed if needed.

Condition: excellent (used), Year of construction: 2007, Weinig Hydromat H2000 50mm spindles 6,000 RPM Bottom 18,5 kW Right 15 kW Left 15 kW Top 22 kW Top 22 kW Bottom 15 kW 11kW feed motor 40m/min. Automatic lubrication system. Heavy duty sound enclosure Golhswmwlwjccqnjiu Possible to supply with automatic infeed and outfeed if needed.

Condition: excellent (used), Year of construction: 2012, Weinig E1 moulder infeed with scissors lift full pack lift Max length 6m 80m/min+ Switchable continuous or stop start feeding as needed Possible to offer moulder also if needed A1 moulder outfeed. Golowmcwljhccqnjiu Automatic deposit on a belt conveyors for manual stacking Scissors lift full pack lift with crossfeed chains Pack outfeed from scissors lift

Condition: excellent (used), Year of construction: 2003, Weinig E1 moulder infeed. Max length 6m Minimum length 450mm 80m/min+ 5.5kW hydraulic unit Switchable continuous or stop start feeding as needed Possible to offer moulder also if needed A1 moulder outfeed. Automatic deposit on a belt conveyors for manual stacking. Gielowmcvbohccqnou

Condition: good (used), High Speed Planing Line Mechanisation with Stacker 1. Weinig destacker 2. Weinig cross feed conveyor. 3. Weinig reject flap 4. Weinig EM814 moulder infeed with flat chain feeder, 150m/min Gslhccqowmcqfjnoiu Possible to offer high speed moulders as needed 5. Weinig outfeed 3m belt accelerator conveyor. 6. System TM outfeed roller conveyor with cross feed chain kicker return to moulder side. 7. Weinig cross feed buffer belt conveyor. Possible to offer bundling system conveyor option here if needed. 8. Weinig flat chain stacker with scissors lift roller conveyor.

Condition: excellent (used), High Speed Planing Line Full Weinig mechanisation system !!!! Waco BKW twin resaw Weinig trimmer saws with outfeed to moulder infeed Golhcswmcnqscqnoiu High speed moulder, choice of Weinig or Leadermac 9 spindle moulders with jointers !!! 2x automatic bundling systems 2x Mosca bundling machines 2x Fischer SFV 800 shrink wrappers Stacker with stick magazines Packing and Mosca strapping equipment Mini pack stacker Professionally dismantled and ready for shipping. Possible to offer installation service if needed.

Condition: excellent (used), Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Specification as follows Weinig Rondamat 960 Powerlock / HSK profile grinder. High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Gielewl Ibgshccqneu Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation. POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick clamping system. Radial table clamping with fine adjustment Max tool width 240mm Max COMFORT PACKAGE option Variable grinding wheel speed 1500 to 3000rpm Lamp Back clearance angle is motorised Grinding wheel advance is motorised Setting of the side clearance angle is pneumatic Hydraulic grinding wheel clamping.

Condition: good (used), Feed speed 10-80 m/min Saw wheel diameter 1050 mm Bandsaw width 130mm Saw motor power 2 x 37 kW Gjlhcowl Am Djcqneiu Hydraulic feed with centering. Saw blade lubrication tank 2 x 6l Voltage 400 volts 50 Hz Weight approx. 10,000 kg

Condition: good (used), WACO BKW resaw + Weinig Hydromat planing line + 2x Fischer SFV800H with handling and packing equipment. Weinig pack infeed chains. Weinig tilt hoist with stick collector Giolhcjwlhtpecqnju Weinig chain cross feed system feeding to belt conveyor before resaw. Weinig single Belt Panel Conveyor. Waco BKW-Twin resaw (2x 45kW) renovated Weinig resaw Accelerator Weinig turning and separating station after resaw Weinig chain cross feed with flat separator Weinig multi crosscut saw with 3x trimmer saws Weinig cross transfer system after multi crosscut saw with sweeper system to belt conveyor. Weinig EM15 4x feed roller moulder infeed accelerator before moulder Weinig Hydromat 23 moulder (9 spindle) Weinig belt conveyor outfeed after moulder feeding to 2x inline preparation lines. Tallybeam reader system. 2x Weinig bundler Units/Conveyors. 2x Mosca SoniXs-MP-6 T Strapping Machines, 2x Fischer SFV800 shrink wrappers (movable with side mounted bypass belt conveyor for when shrink wrapper is not needed) 2x Weinig outfeed conveyors after shrink wrappers Weinig v-belt cross feeder feeding to flat belt cross feeders Weinig layer stacker system (2x Weinig Unistack 400 automatic stackers) with stick magazines Automatic top sheet foil dispenser for pack covering. Weinig automatic pack pneumatic pressure system to squeeze packs Mosca KOF-611 automatic pack strapping machine. Weinig roller conveyors feeding to mini pack stacker system. Weinig chain cnveyors to dispatch. Siemens Simatic Driven PLC. Available immediately.

Condition: good (used), WACO BKW resaw + Weinig Hydromat planing line + 2x Fischer SFV800H with handling and packing equipment. Weinig pack infeed chains. Weinig tilt hoist with stick collector Weinig chain cross feed system feeding to belt conveyor before resaw. Weinig single Belt Panel Conveyor. Waco BKW-Twin resaw (2x 45kW) renovated Gslhccjwlhqzeqnoiu Weinig resaw Accelerator Weinig turning and separating station after resaw Weinig chain cross feed with flat separator Weinig multi crosscut saw with 3x trimmer saws Weinig cross transfer system after multi crosscut saw with sweeper system to belt conveyor. Weinig EM15 4x feed roller moulder infeed accelerator before moulder Weinig Hydromat 23 moulder (9 spindle) Weinig belt conveyor outfeed after moulder feeding to 2x inline preparation lines. Tallybeam reader system. 2x Weinig bundler Units/Conveyors. 2x Mosca SoniXs-MP-6 T Strapping Machines, 2x Fischer SFV800 shrink wrappers (movable with side mounted bypass belt conveyor for when shrink wrapper is not needed) 2x Weinig outfeed conveyors after shrink wrappers Weinig v-belt cross feeder feeding to flat belt cross feeders Weinig layer stacker system (2x Weinig Unistack 400 automatic stackers) with stick magazines Automatic top sheet foil dispenser for pack covering. Weinig automatic pack pneumatic pressure system to squeeze packs Mosca KOF-611 automatic pack strapping machine. Weinig roller conveyors feeding to mini pack stacker system. Weinig chain cnveyors to dispatch. Siemens Simatic Driven PLC. Available immediately.

Condition: excellent (used), Year of construction: 2007, High speed moulder infeed comprising a freestanding flat magazine for use in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 11kW hydraulic unit (max 150m/min). 15kW hydraulic unit (max 200m/min) possible to offer also. Suitable for 300mm wide feed material. A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814. Gielhccswlhqbeqneu

Condition: good (used), 6 Head Multi-head Horizontal Bandsaw Saw pulley diameter: 915mm Sawblade width (max): 100mm Standard saw speed 35m/s Timber width Max: 305mm – 450mm Gislhccjwlhntsqnju Maximum opening saw to chain bed: 305mm Feed chains to saw lines 292mm Main motor: 6x 18.5kw Feed speeds (variable): 15 – 60m/min std, 7.5 – 30m/min (optional) Type of feed: internal overhead feed system with driven chains synchronised with chain bed Operators control station including speed control and start stop controls Working height 800mm

Condition: excellent (used), Weinig EM11 hydraulic magazine feeder with table. Giolhccqswlf N Usnou Width 20-230mm Thick 10-80mm Length 350-3000mm Feed speed 40m/min Supplied with table and hydraulic unit.

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Gjlhowk U A Ujccqnoiu Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. No 1. 15kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 11kw - Right 6000rpm + profile jointer No 3. 11kw - Left 6000rpm + profile jointer No 4 . 15kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 11kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included.

Condition: excellent (used), Year of construction: 2010, Weinig Powermat 500 (6 spindle + Universal) CNC position adjustment. 4798 work hours Machine number 114015 (2010) 160mm x 230mm. All 7 spindles Powerlock, 8,000 RPM Bottom 7.5 kW Right 11 kW Left 11 kW Top 15 kW Top 15 kW Bottom 7.5 kW Universal 7.5 kW 5,2kW feed motor 30m/min feed speed. 2m infeeed table. CNC positioning on spindles 2,3, 4, 5, and 7. 3 way CNC positioning on the universal spindle. Gjlhowk U A Ieccqnsiu Powercom Plus. Possible to supply with automatic infeed and outfeed if needed. Possible to supply with complete handling solution with stacker if needed.

Condition: good (used), Year of construction: 2003, Weinig Powermat (Unimat) 2000 Speed All Powerlock spindles Bottom 15kW 8,000 RPM Right 15kW 4,000 to 12,000 RPM with inverter Left 15kW 4,000 to 12,000 RPM with inverter Top 22kW 8,000 RPM Top 22kW 4,000 to 12,000 RPM with inverter Bottom 15 kW 4,000 to 12,000 RPM with inverter 11kW feed motor. Feed speed 40m/min Golowihmwehccqneiu Automatic lubrication system. Separate control panel Full documentation Possible to supply with automatic infeed and outfeed if needed.

Condition: excellent (used), Marinus Machines V&G 400 Series, Through Feed End Matching Machine suitable for fixed or random lengths as needed Maximum working length up to 6m, Minimum working length: 500m/m Gslewh Rzuehccqneiu Total Power: Appr: 32kw, 400v 50hZ 20 pieces per minute possible depending on length. PLC Controls. Complete Safety Enclosure.

Condition: excellent (used), Feed speed 10-80 m/min (10-120m/min) Automatic center splitting. Automatic center splitting Saw motors 2 x 45kW Gslswhffbjhccqnsiu Maximum cutting height 300 mm Saw blade speed 36 m/sec Saw wheel diameter 1,250 mm Saw wheel width 150 mm Saw motor power 2 x 45 kW

Condition: good (used), Weinig Hydromat H23 50mm spindles 6,000 RPM Bottom 15kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Top 15kw jointer ready Bottom 11 kw jointer ready (straight jointer) + outboard bearing Top 11kw jointer ready (straight jointer) + outboard bearing Bottom 15 kw jointer ready Gelhccowgwkysqneiu Possible to add additional straight / profile jointers as needed !!! 15kW feed motor. Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: excellent (used), Year of construction: 2010, Weinig Powermat 500 (6 spindle + Universal) CNC position adjustment. 4798 work hours Machine number 114015 (2010) 160mm x 230mm. All 7 spindles Powerlock, 8,000 RPM Bottom 7.5 kW Right 11 kW Left 11 kW Top 15 kW Top 15 kW Bottom 7.5 kW Universal 7.5 kW Gislhccqjwgkpcsnou 5,2kW feed motor 30m/min feed speed. 2m infeeed table. CNC positioning on spindles 2,3, 4, 5, and 7. 3 way CNC positioning on the universal spindle. Powercom Plus. Possible to supply with automatic infeed and outfeed if needed. Possible to supply with complete handling solution with stacker if needed.

Condition: good (used), Ceetec IPT250 Touch robust automatic painting machine Tehnical data: Capacity: from 20 m/min. to 180 m/min, Workpiece dimensions: 10×10 mm to 250x250mm, Number of brushes: 8, Number of nozzles: 16, Electricity consumption: 16A, Compressed air: Min. 6 bar, Electrical connection: 3x380V + PE + 0.32A, Gslhcjwgbyrocqnoiu Inlet height: 844 mm (+-50 mm), Weight: 825 kg, Length x width x height: 2400x1100x1475 mm, Direction of throughput: Optional.

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). Gijlhewgbxzjccqnsu A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814.

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Gijlhcjwgbxbjcqnsu Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor Automatic lubrication system. Electric digital display memory system. Possible to supply with Weinig moulder infeed and outfeed