Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: O/67249, product width (min.): 220 mm, product width (max.): 680 mm, product height (max.): 380 mm, product height (min.): 140 mm, TECHNICAL DETAILS Type: Automatic case making machine with conveyor feed Application: Small, medium, and large series suitable for: 3-piece cases, game boards, padded cases (photo albums, bibles, pocket calendars), thin and flexible book covers Setup time: short max. format range: widely opened case format Material Processing processable materials: coated paper, plastic-laminated paper, textile-laminated paper, uncoated paper Formats and Dimensions Book case height (H1): 140 - 380 mm Book case width (B1): 220 - 680 mm Joint width (A): 5 - 15 mm Spine width (C): 18 - 100 mm Cover flap width (D): 12 - 17 mm Material Data Paper cover weight: 80 – 120 g/m² Cover material thickness: 0.1 – 0.3 mm (depending on rigidity) Spine material – Dimensions when fed from the roll Width: 6 - 80 mm Thickness: 0.3 - 0.5 mm Spine material – Dimensions when fed from the magazine Width: 6 - 80 mm Thickness: 1 - 3 mm Spine rolls – Dimensions max. outer diameter: 500 mm core inner diameter: 50 mm, 75 mm, and 100 mm Size ranges for cutting with rotary knives One-piece board – width: 210 - 670 mm Height (uniform for all): 140 mm – 380 mm Spine width (from roll or separate): 6 mm – 80 mm min. overall width for combination of spine and cases: 220 mm max. overall width: 680 mm Operating Data electrical connection rating: 14 kW air demand: approx. 800 l/min (normal pressure) max. speed: 60 cycles/min Operation Operating positions: at the stack (material feed), at the controls, at the delivery table (product output) Feeding systems Board feeding: conveyor belt for pre-punched boards Spine inserter (soft): 3-roll dispensing station with automatic roll change Spine inserter (stiff/hollow): magazine feed Cover material: stacked feed of pre-punched covering material Adhesive system Pre-glue tank: available Hot glue device: mobile, with circulation pump Delivery Removal: conveyor belt for use also independent of the production line EQUIPMENT - Conveyor feed for pre-punched boards - Roll-off station for soft spines with automatic roll change - Magazine feed for stiff and hollow spines Lhelhswpr H Ioccqrjh - Stacked feed of pre-punched cover material - Pre-glue tank and mobile hot glue device with circulation pump - Independent use possible by conveyor belt removal - Complete technical documentation and wiring diagrams available - Suitable for book covers, game boards, flexible and padded cases - Complete technical manuals and wiring diagrams

Condition: ready for operation (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 1904P201, No minimum price - guaranteed sale to the highest bidder! Maintenance regularly performed by BigRep GmbH technical staff TECHNICAL DETAILS Nozzle size: 0.6 mm Layer height range (for 0.6 mm nozzle): 0.1 mm – 0.4 mm max. output (with 0.6 mm nozzle): 16 mm/s Extruder: Two MXT extruders with 0.6 mm and 1 mm nozzles Printing area Build volume (X × Y × Z): 1,005 × 1,005 × 1,005 mm Layer height resolution: 0.1 mm – 0.8 mm Acceleration: up to 10 m/s² Printing technology: FFF – Fused Filament Fabrication (material extrusion) Printing materials: ASA, PA66 (other materials in development) Support materials: soluble plastics Max. print bed temperature: 99°C MACHINE DETAILS Printer (L × W × H): 1,950 × 2,430 × 1,790 mm Lhjlhswpqm Hjccqroh Printer weight: 1,500 kg Installation requirements Floor: even and flat Safety distance: 2 m around the machine (when doors are closed) Required floor load: 500 kg/m² Operator: operator must be trained Operating temperature: 18°C to 25°C Relative humidity: 30 to 70% (non-condensing) Exhaust diameter: 100 mm Electricity Connection configuration: 3 × AC 400 V, 50/60 Hz Connections: CEE socket (400 V, 16 A), LAN network (RJ45) Input current: 16.0 A Power consumption: 5,800 W Safety certifications: CE certified EQUIPMENT - 15 rolls of large filament - Packaging: original manufacturer’s foil

Condition: like new (used), Functionality: fully functional, Year of construction: 2017, machine/vehicle number: Geo Knight Maxi - Press, Please see PDF for detailed secifications: The Maxi Press AIR is an Automatic large format heat transfer press intended for more automated and higher pressure needs than the Manual version. The Maxi- AIR provides an oversized platen & a better production-oriented press with a single front loading table and high pressure pneumatic lifting system. This pressure system is powered by a dual air-bag, 10-ton, 20,000 lbs max force self leveling mechanism. The press is activated with a push of a button, and automatically releases at the end of the timing cycle. The front console features the Digital Knight control, regulating digital temperature and digital automatic timing control, as well as full air pressure regulation. Ideal applications that the Maxi- AIR has performed flawlessly include: large fabrics & piece goods, full-bleed printed sportswear, banners, fl oor mats, carpets, mouse pads, plastics, sheet metal and much Ljlhccqov Dm Uderjhh more. Most importantly, the 20,000 lbs of regulated applied force allow for deep embedding of materials such as TILES into nomex padding for full bleed wrap-around printing, as well as larger embossing applications. The Maxi- AIR strongly supports the sublimation transfer process, as well as digitally produced transfers, hot and cold peel plastisol transfers and large format laminating processes.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,200 h, Functionality: fully functional, machine/vehicle number: L36/150, input voltage: 380 V, product height (max.): 25,000 mm, L36/150/TC/CE Years: 2023 Flexografic Printing Press 3 colours - 150 mm. width -Automatic twin turret re-winders rotating at the pre-selected tape roll length. - The operator will cut the tape, discharge the printed rolls and load the empty -380V. 50Hz 3phase Cast Iron Support Frame Lolhccqewq Ay Ierjhh MACHINE DESCRIPTION 3" i.d. frictioned un-winder for tape Noise reducer & Low Tape alarm pressure roller Corona Treatment unit - Corona Treatment proportionally adjusted on the tape speed - Ventilation & Suction system for Corona Treatment - Primer Station before printing for tape printing preparing - Ventilation & Suction system for Primer Station 3 Printing Stations complete with metal screened rollers and printing cylinders with gears for 150,7 mm print repeat -Release Station after printing - Ventilation & Suction system for Release Station -Pressure roller for Release Station - Slitting station with razor blades on the adhesive size - Twin furrets re-winders with 2 mandrels for 3" i.d. cores - Pneumatic pump for automatic Primer and Release feeding - 9 additional different cliché cylinders with gears 3 x 260 3 x 280 3x Z100 - Cliché mounting device - Set of spacers for slitting blade holders setting - 152 mm rubber roller for full coating - 50 mm. paper tab dispenser + 30.000 paper tabs - Set of spare parts + Bonus Flexo plate Machine (water based) Price: €76.000

Year of construction: 1983, Condition: used, Punching machine / label punch / gun punch Busch B Lhjlhccswu Duusqreh works according to the push-through principle manual closing of the safety door Technical data: Max. Punching format 230 x 230 mm Min. punching format 10 x 10 mm Max. Insert height (punching knife height 60 mm) 170 mm Punching pressure 5,700 kg Max. punching strokes p/min 10 Max. Machine output (with 1000 sheets/80 g/m2) 600,000 sheets/h Weight 855 kg

Condition: used, In this offer you purchase a used inkjet printing system "Canon VarioPrint i300" Object of sale: 1 x Canon VarioPrint i300 with the following equipment: The exact equipment can be found in the attached PDF document. Meter readings: Total: Approx. 166,100,000 Condition: The machine has been continuously serviced by Canon. Maintenance certificates available. A certified disassembly was carried out by Canon. The machine was restored to its delivery condition. A final test ran flawlessly. The machine was then dismantled by Canon specialists and packed in wooden crates, which were also originally used for delivery by Canon. The machine is our property and is NOT a brokerage transaction. This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Lhsletw Sk Uehccqroh The device has been tested for function. Test printouts are shown. Packaging and dispatch: An inspection of the machine in Belgium is possible by arrangement. The machine is already packed in the original delivery boxes. Worldwide shipping possible on request! For further information you can of course contact us personally.

Year of construction: 2011, Condition: used, KOLBUS Casemaker DA 260 with board cutting device PS year 2011 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Configuration: - board magazine for manual loading - cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - miss cloth control during the separation process - counter stacker delivery with following roller conveyor incl. table - moveable gluing station for processing hot-glue with glue preparation unit in the premelter, heated glue application roller and scraper roller - cloth cylinder with grippers and exchangeable plates for rubber pad (5 pieces 500 mm wide and 5 pieces 720 mm wide, incl. 10 pieces of rubber pads) - glue application adjustment from outside of the machine - viscosity control device for automatic water supply to ensure constant glue viscosity with pump - pressing roller device for crease-free connection of the cover material with boards and spine strip - device for producing padded cases - automatic case counter - single case request for control purposes done from the operating side - stack delivery Special equipment: - board cutting device PS - device for producing quarter-bound cases in 2 passes Ljlswhdifehccqrohh Technical specifications: mechanical speed: up to 40 cycles/min open cover size max.: 670 x 390 mm open cover size min.: 205 x 140 mm joint width: 4 - 15 mm spine width: 14 - 120 mm turn in width closed: 8 - 15 mm cloth width: 223 - 708 mm cloth height: 130 - 428 mm board thickness: 1 - 4 mm board width: 95 - 328 mm board height: 140 - 390 mm board centre strip thickness: 1 - 4 mm board centre strip width: 6 - 90 mm centre strip roll thickness: 0,3 - 0,6 mm centre strip roll width: 6 - 90 mm

Condition: good (used), Year of construction: 2005, max. size 76 x 120 cm age 2005 pallet feeder with suction head MC Control Lolhcowuydlscqrjhh 4 folding pockets in the parallel fold section following knife shaft 2 folding knives in the cross fold section 1 additional folding pocket after the 1st cross fold stacking delivery Desta

Condition: like new (used), Year of construction: 2015, operating hours: 500 h, Functionality: fully functional, machine/vehicle number: Transmatic 7360 Sport, input voltage: 400 V, type of input current: three-phase, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, MAKE: TRANSMATIC MODEL: 7360 SPORT CONDITION: VERY GOOD YEAR: 2014 POWER SUPPLY: 400v 3PH AIR SUPPLY: YES NOTES: *3 MODES * ROLL TO ROLL FABRIC *ROLL PRINT TO PIECE FABRIC *ROLL FABRIC TO PIECE PRINT Lhjlhccqsv Dpyvjrjh Designed for digital printing on cut pieces, placed prints, traditional roll-to-roll printing. This application is especially suitable in the sports T-shirt printing industry. A new oil heating system ensures uniform temperature distribution over the entire length of the cylinder with minimal energy consumption. Transmatic’s oil heating systems consume 50% less energy than electric machines.nThis calender has 3 different ways of operation. 1)Transfer papers are placed with the design facing upward on the table. Cut fabrics (fronts, backs, arms, necks, etc.) are placed on top of the pattern. The printed fabric pieces and paper leave the machine via a rear conveyor belt. 2)Use of roll transfer paper with the ability to place cut pieces of fabric. 3)Traditional printing of both transfer paper and fabrics in continuous. Electro-pneumatic felt guide control. No.6 3″ quick-connect shafts. Three friction-driven and three friction-driven and motorized rewinders. Reversing safety bar. n One outfeed conveyor belt cools and carries the printed pieces to the back of the machine to detach them. Automatic machine shut-off system after felt cooling Digital adjustable speed control. Requires compressed air.

Condition: ready for operation (used), Year of construction: 2015, General Data Measurements width 4200 mm Measurements depth 5900 mm Measurements height 3009 mm Machine weight 2240 kg Lholswuwtdohccqrsh This Concept Laser M2 cusing 3D Printer was manufactured in the year 2015. Application Types 3D Printing

Condition: used, Year of construction: 2025, NEW MACHINE Mohr D 56 ECO Accessories: 2 HSS knives On-board tool Documentation Lslewkrilohccqrehh 6 months Polar warranty (only parts without labor - from date of installation) available at short notice

Condition: used, Year of construction: 2004, Feeder(s) for gathering machines Kolbus ZU 840 Year: 2004 Lhelhowut D Eoccqreh Description: - Number of feeders: 16 - ATC thickness control - Pump(s): Nash-Elmo -Set up element -Intermediate element Feeders can also be sold individually. To be used for feeders or extension of existing machines!

Condition: ready for operation (used), Year of construction: 2014, operating hours: 229 h, Functionality: fully functional, machine/vehicle number: DS001155, Size 53 x 74 cm, Prinect Press Center, Axis Control, Autoplate XL, Alcolor dampening, cooling and recirculation unit, perfecting 4-4 or 8-0, excellent condition Ljlewuth Rehccqrohh

Condition: good (used), Year of construction: 2004, max. size 37,50 x 52 cm age 2004 stream feeder vacuum feed board register remote adjustment diagonal register remote control semi automatic plate change Ryobimatic film dampenings cooling unit Technotrans dry sprayer Lsljwutzkohccqrshh shown totalizer: approx. 50 mill. impressions

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Unit 1 Unused and New Condition $20,000.00 USD Unit 2 Used - Excellent Condition $16,000.00 USD Lhjlhsv Dpy Nsccqrsh

Condition: good (used), Year of construction: 2021, Canon Varioprint 6180 Titan Including C53 controller. Total counter: 17 million. Immediately available. Lelowutchshccqrohh

Condition: new, Year of construction: 2025, NEW MACHINE Polar N92 PLUS Accessories: Air tables 50 x 75 cm left and right 2 knives HSS On-board tool documentation Ljlhccjwiulgsqrohh 6 months Polar warranty (only parts without labor - from date of installation) available at short notice

Condition: used, Year of construction: 2009, Folding machine MBO K 800.2/6 S-KTL Year: 2009 Description: - 16 page folder - MBO Navigator Feeder - Pallet feeder: FP 120 - Excluding pump - Machine was connected to a centralised air system Folding unit MBO K 800.2/6 S-KTL - Parallel fold unit with 6 buckle plates - Slitter shaft cassette - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left Delivery Palamides Alpha 700 Lhslhccowaxqujqreh Year: 2010 - Vertical stack delivery with pressing Max. mechanical speed: 10 - 180 m/min Maximum size: 780 x 1200 mm Minimum size: 170 x 250 mm

Condition: good (used), Year of construction: 2000, width 66 cm age 2000 vertical pile delivery VSA 66 digital version mobile sub-frame Delivery time: immediately Lholhjwuqdpoccqreh

Condition: ready for operation (used), Year of construction: 2014, Functionality: fully functional, Ricoh IP5000 AD3/AD4 128m Counter A: 100 million Ljlhewk Eilsccqrshh Counter B: 80 million Including Hunkeler UW6 and RW6 tight web!! Hunkeler POPP6 Roll2Roll Pictures are available on request...

Condition: used, Year of construction: 2024, NEW MACHINE Equipment: 2 x nickel-plated air table 1000 x 1000 2 x HHS knives Knife changing tool 6 months Polar warranty on parts (excluding labor - from date of installation) Technica Data: Cutting width 1,370 mm Insertion depth 1,450 mm Max. insertion height 165 mm Safety pressing pressure 30 daN Press pressure, min 150 daN Press pressure, max 5,500 daN Saddle speed return (0 - ...) 300 mm/sec Blade speed 45 cycles/min Lolswu Dkpjhccqrehh Residual cut, automatic, without cover plate 25 mm Residual cut, automatic, with cover plate

Year of construction: 2004, Condition: used, Book mark inserting machine Sigloch LEH-3 Year: 2004 Description: - Inline production - Right hand infeed Ljlhccowutrcoqrshh - Bookmark insert: 2 - Scissor - Delivery to the right - Bypass-system - Delivery to the right Sigloch: LEH-3 Book block format (max): 350 x 240 x 70 mm Max. mechanical speed: 60 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2004, Book block feeder Meccanotecnica - Kolbus Feedo - XMT 280 Year: 2004 Description: - Left hand infeed Lelhccqowutp Isrohh - Pre stacking conveyor

Year of construction: 2009, Condition: used, Case maker Hoerauf BDM Speed Year: 2009 The BDM Speed is a high speed casemaker with an output of 85 cases per minute, specially designed to meet the requirements of medium and large size companies, for the production of book cases with rigid or flexible spine, as well as one-piece cases for ring binders and letter files. Description: - Colour monitor - Automatic setting - Board pre stacking conveyor - Board magazin - Board cutter: KS - Centre strip infeed (stiff) Lhslhccqevc Ucaersh - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control - Device for producing quarter-bound cases in 2 passes - Pressing station - Stacking delivery - Pump Hörauf (also known as Hoerauf or Horauf) Size range opened case (max): 670 x 390 mm Size range opened case (min): 190 x 130 mm Max. mechanical speed: Up to 85 cases/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2009, Three knife trimmer Müller Martini Orbit (3675) Year: 2009 For three side trimming of book blocks and brochures, operable in connection with soft- and hardcover book production lines. Description: - Colour monitor with touchscreen - Infeed conveyor - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 Maximum size (uncutted): 384 x 320 mm Ljlhccqowuthwsrohh Minimum size (uncutted): 140 x 72 mm Maximum size (cutted): 304 x 303 mm Minimum size (cutted): 136 x 70 mm Book thickness: 2 - 80 mm Max. mechanical speed: 1.000 to 7.000 cycles/hr Condition: This machine is offered fully cleaned and checked in good running condition Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.