Used shrinking equipment for sale (263)

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: KALLFASS Model: UNIVERSA 500, year 2010 Model: Shrink Tunnel COMPACT 650 SO, year 2010 SPECIFICATIONS KALLFASS UNIVERSA 500 - fully-automatic side sealer Transverse seal bar, length: 500 mm Product clearance height: up to 200 mm Power supply: 208 - 480 volt Film, center-folded film: 12 - 80 μm Transport speed: 10 - 35 meter / minute Packaging capacity, max.: 85 cycles / minute Technical Data Compact 650 SO Tunnel clearance in width: 650 mm Tunnel clearance in height, adjustable: 100 - 400 mm Length of the heated tunnel hood: 1100 mm Air-flow regulation with patented ring nozzle system: standard Maintenance free plastic-mesh-belt: standard Transport speed infinitely variable, frequency controlled: approx. 10 – 35 m/min. Capacity of the tunnel blower infinitely variable, frequency controlled: standard Energy saving 2-stage heating with special insulation in tunnel hood: standard Temperature control by means of electronic thermostat: switching precision +/- 0.2° C Wear resistant and contactless temperature control: standard safety device according to EC regulation machines EN 60204: limit temperature control: standard Working height, adjustable: 800 - 900 mm Power supply: 400 Volts, 50 Hz, with protective earth conductor Heating capacity, installed, 2-stage switchable: 9.0 + 4.5 kW Rated capacity: 14.5 kVA Bsdpfx Amjxnzlhoyolk Nominal current at 400 V: 21.0 amps Total connected load: max. 37.0 amps (incl. add. three phase power supply) Position of control cabinet and operating side: left hand side in working direction

Condition: used, Year of construction: 2021, functionality: fully functional, Fully automatic sealing packaging line PRATIKA 80-T MPS for sale! The basket sealing packaging line consists of equipment from various manufacturers, integrated into a single technological line that complies with CE safety directives and has been certified accordingly. The basket sealing packaging line consists of: · PRATIKA 80-T MPS, year of manufacture 2021 · 2 pcs. x 1.80 m conveyors with positioning system · 1 pcs. x 2,70 m conveyor · 2 pcs. x 3 m conveyors · 1 pcs. x 3,30 m conveyor (at the control panel) · 1 pcs. x 1,10 m conveyor · 2 pcs. push cylinders · Control Panel with Siemens controller · Electrical cabinet · Security fences Packaging line requires approx. 4 × 11 m of floor space. Layout on request. PRODUCTS SIZES. This line was used to package products with the following dimensions: Kompelement mesh basket size 500x350x160 mm. Productivity in hour 1470 pcs. Kompelement mesh basket size 500x580x160 mm. Productivity in hour 1260 pcs. Kompelement mesh basket size 750x350x160 mm. Productivity in hour 1050 pcs. Kompelement mesh basket size 750x580x160 mm. Productivity in hour 1050 pcs. Kompelement mesh basket size 1000x350x160 mm. Productivity in hour 840 pcs. Kompelement mesh basket size 1000x580x160 mm. Productivity in hour 744 pcs. Jonaxel mesh basket size 459x501x137 mm. Productivity in hour 1260 pcs. TECHNICAL CHARACTERISTICS PLC Programmable Logic Controller Siemens Input/output monitor HMI Siemens Conveyor system speed up to 20 m/min Bljdjyxd Nmspfx Amyjk Packing system capacity up to 25 bags per minute with every second bag inserted Maximum packaging film thickness 50 microns Maximum packaging film roll diameter 350 mm Note: Labeling, printer, filter and lasers shown in the photos are not for sale.

Condition: new, Year of construction: 2018, Automatic angle welding machine Manufacturer: Diez Type: AWS4535 Year of manufacture: 2018 No operating hours! Welding frame: 500 x 350 mm Band width: 32 mm Bljdswriuujpfx Amyok External dimensions: 170 x 130 x 135 cm 22726

Condition: used, Year of construction: 2021, The Smipack XP 650 ALX is a fully automatic monobloc overlap shrink wrapper with an inline infeed conveyor. It packs products like glass/PET bottles, cans, jars, and boxes at speeds up to 25 packs per minute using a single film reel system. [1, 2, 3, 4] Key Features Operation Modes: Works with film-only, or with pad/tray configurations depending on exact model variations (like ALX-T or ALX-P). Infeed System: Multi-row inline infeed with an electromechanical oscillating sorter to align products. Film Handling: Single film reel design with optional printed film centering devices. Shrink Tunnel: Built with an efficient double-chamber shrinking setup. [1, 2, 3, 4, 5, 6] Technical Specifications Max Output: Up to 25 packs per minute (ppm) Max Product Height: 380 mm Max Reel Size: 650 x Ø 400 mm Working Pressure: 6 Bar Bjdezp A Uaopfx Amyjlk Machine Weight: Approx. 1,682 kg ed linking conveyor into a high-performance double-chamber tunnel for final heat shrinking. Standard Built-In Features Pneumatic Reel Locking: Uses a dedicated reel chuck with convenient built-in rollers to streamline heavy roll replacements. Safety & Control: Equipped with sliding protection doors featuring a deceleration device, manual reel sealers, and a metric-graduation centering system. Sensor Grid: Features a complete array of photocells monitoring product presence, infeed obstruction, film wrapping, and tunnel outlet accumulation. Are you interested in reading about the FLXMOD® control system details, or do you need a list of available optionals like the printed-film centering device? AI responses may include mistakes. Learn more Year of construction: 2019 & 2021 Max speed: 72000 Current size (ml): 3×2 Container material: Can, Glass, Pet Max. container: height 170 mm Packaging Type: Film Number of lanes: 8 Max reel size: Ø 500 mm Number of reels: 2 Automatic Changeover: No Compatible Spare Parts: 6 months Dimensions: 17500x1800x2400 mm Power: 182 kW Compressed Air: 6 bar

Condition: repair required (used), Year of construction: 1999, functionality: not functional, KALLFASS KC5040/450 universal machine, manufactured in 1999, complete with operating manual, electrical wiring diagram, and parts list. The machine can be used as a source of spare parts or, with some skill, be restored for further use. Bledpfszmygujx Amyok Equipment and condition can be seen in the attached photos. The price is ex works, unpacked, and excluding VAT. If you have any questions or require additional detailed photos, please do not hesitate to contact us.

Condition: used, Manufacturer: MSK Tip: KOMBI-MULTITECH Bljdpsq U Rhpjfx Amyok Year of manufacture: 2007 manual The device is already disassembled and can be delivered immediately!

Condition: good (used), Welded frame size: 650 x 500 mm. Bodpfx Amsixttysyjlk

Condition: good (used), Belt length: 1250 x 650 mm Welding area: 1000 x 700 mm Blsdpfxoi D Dz He Amysk

Condition: good (used), Format 500 x 500 mm. Bodpfx Amjgt Unksyjlk

Condition: good (used), Tunnel passage width: 540 mm Blodpfx Ashinmfemyok Tunnel passage height: 40 mm Quantity: 3 pieces Price per piece

Condition: good (used), Format: 500x500 mm Bjdpfx Aogt Uplomyelk

Condition: good (used), Format: 500x500 mm Bjdpfxjgt Un Se Amyolk

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, safety light barrier, For sale is a linear robot with a suction module for palletizing cardboard boxes. The system is designed with 2 palletizing stations. Currently, a package is picked up every 9 seconds and placed on the pallet according to the layering pattern. The system will remain in production until November 26th and can be inspected. The control system is a Siemens S7 and is controlled with 3 axes by a Siemens SIMOTION D. The machine is operated via a Siemens touch panel. Blsdpfjzph Ufex Amyek We would be happy to send you a video as well.

Condition: excellent (used), functionality: fully functional, Angle sealing machine and shrink tunnel Manufacturer: AVC Sealing Solutions Angle sealing machine, type HS-500 Sealing strip: 500 x 600 mm Machine dimensions: 1780 x 1020 x 1120 Shrink tunnel, Type 1000 Tunnel opening: 440 x 300 mm Shrink length: 1000 mm Bodpfx Aszpd Izemyelk Machine dimensions: 1800 x 1100 x 1600 Maximum heating power: 11 kW In very good condition; the equipment has been used very little.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Kallfass Universa 500 with shrinking tunnel by Hugo Beck Kallfass Universa 500, manufactured in 2011 The system is available immediately. The price of the complete system includes the Universa 400. The machine is technically refurbished and in very good condition. Technical data: - Length of transverse sealing bar: 500mm - Sealing bar opening: max. 200mm - Min. product length: 80mm - Automatic length adjustment to reduce the sealing gap - Film guide plate, available as an option - Control system: Siemens S7-300 - Operator terminal with Siemens TP270 Blsdjzn Un Ajpfx Amyek - Sealing bar with replaceable sealing strip - Side sealing knives - Processable films: PE and PO - Year of manufacture: 2011 - Shrinking tunnel: Hugo Beck Transverse and side sealing are checked and refurbished. Infeed, outfeed, and transport belts are inspected and replaced if necessary. The machine will be available after inspection and repair. Installation of the system is included in Germany, Austria, and Switzerland. Fully automatic flow-pack machines for packaging products - regardless of their length - with complete wrapping and without film overlap. The product is fed via a conveyor belt and simultaneously inserted into a half-tube film using a forming shoulder. The product is detected by a light barrier. The feed belt can be easily adjusted for different product widths. After the product is wrapped in film, transverse sealing is performed using a continuously heated sealing system. Longitudinal sealing is created by a continuous side sealing unit. The height of the forming shoulder and sealing units can be adjusted manually. The remaining film strip is collected on a film take-up reel. If required, we also offer installation and service for this or systems from other manufacturers. Subject to prior sale. The price is EXW. No guarantee for technical data.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 74874, For sale is a shrink wrapping machine, Smipack FP560A/Saropacker WS560A, with a shrink tunnel T450, year of manufacture 2017. Bjdpfx Amozn Nphoyolk An inspection and functional test while the machine is powered on can be arranged during working hours by prior appointment. If you are interested or have any questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 70432, For sale is a fully functional laminating machine, including 2 feed conveyor belts, model GH2000/400, and a shrink tunnel, model Minipack Tunnel50 Twin GT. Viewings can be arranged in Vienna on weekdays. Bjdpfx Aezn I A Hjmyslk

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Compact shrinking machine KC 5040/450 Universal Year of manufacture: 2006 Technical data: Welding frame dimensions: 500 x 400 mm Film roll width: max. 550 mm Working height: 870 - 970 mm Power connection: 380 V three-phase Easy-to-operate angle welding machine, combined with a shrinking tunnel. Particularly robust design for industrial use. Welding frame dimensions 500 x 400 mm. Proven impulse sealing technology with Teflon-coated separating wire for an absolutely odorless operation. Equipped with a sealing mechanism as a clamping system to ensure accurate adherence to the set sealing time and for problem-free separation welding, even with thick films. Bljdpfx Aszlrqpsmyek Inspection and demonstrations are possible by arrangement in our premises. Functional guarantee, no warranty.

Condition: as good as new (ex-display), Year of construction: 2018, Shrink tunnel Manufacturer: Diez Bodpfxszlrpre Amyslk Type: HTC 8540 D Year of manufacture: 2018 Belt width: 85 cm Length: 250 cm Clearance height: 40 cm New No operating hours 22726

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Complete Kempner automatic L-sealing, shrink wrapping and labelling system, manufactured in 2024 and in excellent working condition. This system comprises of the following machines: 1 x Kempner automatic L-sealer. Model - ZF-A6345-T. Serial number - 13677. Sealing bars - 560mm x 380mm. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2.5 kW. Blodpfx Ameyrup Aeyjk 1 x Kempner shrink heat tunnel (electric). Model - ZF-S550. Serial number - 22097. Electrical requirements - 380 V / 50 hz / 3 phase. Power - 12 kW / 27 Amps. 1 x Kempner automatic easy tear label applicator. Model - ZD-L1. Serial number - KL-24022-4. Electrical requirements - 220 V / 50 hz / 1 phase. Power - 2 kW. This system was previously used to pack donuts and was in production for approximately 9 months in total. Manufacturer - Kempner.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 400 V, Minipack Tunnel 70 The Minipack Tunnel 50 is a well-insulated and quiet two-chamber shrink tunnel designed for wider and taller products. – Shrink tunnel for various packaging requirements – Suitable for different types of shrink films Bedjyaqihepfx Amyjlk – Power supply: 400 V, 50/60 Hz, 3-phase – Installed power: up to 14.5 kW – Max. product dimensions: 680 × 390 mm (variable length) – Tunnel entry: 690 × 390 mm (W x H) – Machine dimensions: 2770 × 1160 × 1640 mm (L x W x H) – Machine weight (net/gross): 415 / 483 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, MINIPACK MEDIA The Minipack MEDIA is a compact, semi-automatic packaging machine featuring L-shaped sealing and an integrated shrink tunnel. Its monoblock design makes the machine particularly space-saving. – Teflon-coated sealing bars for reduced smoke emission – Production capacity up to 750 pieces per hour – Sealing bar dimensions: 540 × 400 mm – Max. film roll width: 600 mm – Max. film roll diameter: 350 mm – Tunnel entry dimensions: 440 × 240 mm – Working table height: 875 mm – Machine dimensions (closed): 2,780 × 730 × 1,400 mm Blsdpfx Asx Ttbhjmyok – Machine weight: 286 kg (net) – Motorized waste rewinder as standard

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Pratika 55 Smart TSG The Minipack Pratika 55 Smart TSG is a fully automatic packaging machine with integrated shrink tunnel and modern PLC control system. – Fully automatic packaging machine with integrated shrink tunnel – Electric servo motor for sealing bars – Electric, non-pneumatic feeding system – Power supply: 400 V, 50/60 Hz, 3-phase (inverter) – Maximum installed power: 9 kW (400 V) – Maximum current consumption: 15 A (400 V) – Hourly output: 0–1,200 packs/h – Maximum product dimensions: 400 × 420 × 120 mm Bledpfx Aex Ttkpsmyjk – Maximum film roll size: Ø 250 × 600 mm – Conveyor belt height: 870 mm (standard) – Machine dimensions (door open): 2,240 × 1,625 × 2,372 mm – Machine dimensions (door closed): 1,325 × 1,625 × 2,372 mm – Machine packing dimensions: 1,440 × 1,990 × 2,950 mm – Weight (net/gross): 730 / 865 kg – Machine color: RAL 7035

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Pratika 80 MPS The Minipack Pratika 80 MPS is a fully automatic side sealing packaging machine. It is designed for products with a maximum height of 360 mm and is also suitable for very long products. – Fully automatic side sealing packaging machine (continuous side sealing) – Maximum product height: 360 mm – Product lengths over 2 m possible Blodjyant Repfx Amyok – Usable seal bar dimension: 700 mm – Maximum film roll dimensions: Ø 350 × 800 mm – Infeed conveyor height: 915 mm – Machine dimensions (closed): 2,785 × 940 × 1,770 mm – Machine dimensions (open): 2,785 × 940 × 2,280 mm – Output: up to 3,000 packs/h (depending on product/film)

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, MINIPACK Modular 70 The Minipack Modular 70 is a powerful semi-automatic packaging machine featuring an L-bar sealing system for producing shrink film packages. Thanks to its larger sealing bar, it is also suitable for packaging larger products. – Semi-automatic packaging machine with L-bar sealing – Electronically controlled sealing system – Manual or automatic operation modes – Simple and intuitive controls – Output up to 900 units per hour – Usable sealing bar dimensions: 840 × 600 mm – Max. film roll width: 800 mm – Max. film roll diameter: 300 mm Bedpox Tr Umofx Amyjlk – Working table height: 930 mm – Machine dimensions (closed): 2,070 × 960 × 1,220 mm – Machine dimensions (open): 2,070 × 960 × 1,510 mm – Net weight: 243 kg