Used High-pressure water jets for sale (73)

Condition: as good as new (ex-display), Year of construction: 2020, We currently have a Hammelmann Aquajet 14, HDP 144, 2500 bar and 30 liters, built in 2020, with a 140 kW Deutz diesel engine. The pump is immediately available and in almost new condition. Ve Laedpfxopmtd Nj Ab Ush

Condition: good (used), Year of construction: 2001, operating hours: 1,858 h, functionality: fully functional, Falch T5H hot water, 500 bar, 30 liters, new TÜV and SERVICE, incl. accessories! Ledpfxoxqggpe Ab Usah

Condition: like new (used), Rental of HD units Europe-wide, long-term rental, Laedpfx Abexnq Swo Ujh

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, total width: 2,400 mm, total length: 1,250 mm, total height: 1,150 mm, pressure: 2,000 bar, operating pressure: 2,000 bar, type of input current: AC, overall weight: 3,300 kg, rotational speed (max.): 1,500 rpm, power: 132 kW (179.47 HP), year of last overhaul: 2023, water pressure: 2,000 bar, pump capacity: 34 l/min, Equipment: type plate available, Stationary high-pressure pump unit Woma EG 250M-P20 on base frame. Similar but not Hammelmann, Kamat, or Uraca. Pump type: 250M P20 Operating pressure: 2,000 bar Flow rate: 34 l/min Drive speed: 1,500 rpm Drive power: 132 kW With EMK electric motor, with pressure control valve, with safety valve. Dimensions (LxWxH): approx. 1,250x2,400x1,150 mm Weight: approx. 3,300 kg Year of manufacture: 2013 Lodpfx Aboxmki Ts Uoah Condition: In very good used condition. Pump has been serviced regularly, most recently at the beginning of December 2023. Documentation available.

Condition: like new (used), Year of construction: 2025, operating hours: 50 h, functionality: fully functional, pressure: 2,800 bar, overall weight: 3,000 kg, rotational speed (min.): 1,900 rpm, pump capacity: 30 l/min, Equipment: type plate available, HAMMELMANN AQUAJET 144 Year 07/2025 Lsdpfx Absvgrpxs Usah 2800 BAR Manufacturer's warranty DEUTZ TCD 6.1 ST5 140 kW engine Available immediately

Condition: good (used), Heavy duty high pressure washer. Laodpfx Ajh Rkileb Uoh Two motors - 90kW + 1,5kW Machine was used for few hours and then stored at the warehouse. Delivery is available.

Condition: excellent (used), Well-maintained Hammelmann HDP 42, 970 bar and 16.5 litres, year of manufacture 2012. Laodpfx Abexgvhne Ueh

Condition: used, Year of construction: 2013, operating hours: 14 h, functionality: fully functional, machine/vehicle number: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, total width: 1,500 mm, total length: 3,000 mm, total height: 2,500 mm, pressure: 2,800 bar, operating pressure: 2,800 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 700 rpm, rotational speed (max.): 1,500 rpm, high-pressure hose length: 60,000 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, A Bundle of 5 ea. UHP waterblast machines, c/w a vast variety of spares and accessories, as follows: 1 x High-Pressure Water Jet Unit with Deutz-MWM V-8 Diesel Engine adjustable pressure 0–1400 bar and 0–2800 bar, dump system, with plunger changeout kit as follows: 1400 bar at 99 liters/minute, and 2800 bar at 46 liters/minute. The fluid head of this pump, including stuffing boxes and valves will be used for both 1400 bar and 2800 bar. Changing pressure range between 1400 and 2800 Bar is carried out by a simple and easy plunger changeout. The unit was built in 2013 and kept operational as a backup machine, but was only used once for 14 hours at 2800 bar for a bundle heat exchanger cleaning project. This UHP machine is mounted on a zinc coated steel skid. The Deutz-MWM engine was purchased as a used engine, with approx. 3,000 operating hours , and was fitted in 2013 with a new Jetech UHDW high-pressure water jet pump. In addition, a large amount of accessories and spare parts are included, such as dump guns & foot valves, swivel joints, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP waterblast unit is also available, but with a Scania V-8 engine and counting 850 operating hours at max. 1400 bar / 99 liters/minute. That unit is housed in a 20ft. container, with an 800 l Diesel Tank, a work bench /vise, Furthermore, there are 3 additional high-pressure water jet units with 110 kW power each, 2 of which have Volvo TD71A Diesel Motors, plunger changeout kits for 1400 and 2800 bar. A third unit is a Kamat K11000 with 2800 Bar OP. and a JCB Dieselmax engine. Lasdpfx Aboxc E Tre Ujh Also available is a hydraulic heat exchanger cleaning device with a rotating lance mounted on a scissor lift table, suitable for very large heat exchangers. All equipment comes from the closure of my company due to retirement. A buyer is sought for all machines and accessories as a complete package. Price for the complete package 150000 € , pick up only, at D-36404 Vacha/Germany, or delivery in germany subject to additional fees.

Year of construction: 1996, condition: excellent (used), Hammelmann HDP114 2500 bar 20 ltr/min Lsdpfok Iu Efsx Ab Usah Caterpillar engine In absolute good working condition

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, total width: 2,400 mm, total length: 1,250 mm, total height: 1,150 mm, pressure: 2,000 bar, operating pressure: 2,000 bar, type of input current: AC, overall weight: 3,300 kg, rotational speed (max.): 1,500 rpm, power: 132 kW (179.47 HP), year of last overhaul: 2023, water pressure: 2,000 bar, pump capacity: 34 l/min, Equipment: type plate available, Stationary high-pressure pump unit Woma EG 250M-P20 on base frame. Similar but not Hammelmann, Kamat or Uraca. Pump type: 250M P20 Operating pressure: 2000 bar Flow rate: 34 l/min Drive speed: 1500 rpm Drive power: 132 kW With EMK electric motor, with pressure regulating valve, with safety valve. Dimensions LxWxH: approx. 1,250x2,400x1,150 mm Weight: approx. 3,300 kg Year of manufacture: 2013 Condition: In very good used condition. Pump has been serviced regularly, most recently at the end of November 2023. Documentation available. Lajdpfxexmkiys Ab Ush

Condition: like new (used), Year of construction: 2024, operating hours: 140 h, functionality: fully functional, total width: 1,900 mm, total length: 3,800 mm, total height: 2,000 mm, operating pressure: 2,500 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 1,950 rpm, empty load weight: 2,500 kg, fuel tank capacity: 140 l, noise level: 109 dB, power: 148 kW (201.22 HP), Equipment: type plate available, Den-Jet CDT200-2500 Pressure: 2500 bar Flow rate: 25L Lsdpfxexawf Io Ab Ujah Engine power: 200 hp A lease purchase is also possible. The full manufacturer's warranty is still available. Contact: +436677994594

Condition: new, Year of construction: 2025, overall weight: 230 kg, water tank capacity: 110 l, Workshop Cabin Washer, constructed from stainless steel AISI 304 and acid-resistant steel AISI 316, designed for professional use in various industries and automotive applications. It is used to remove heavy dirt without damaging the surface of the cleaned element. Operates in a closed-loop system at temperatures up to 45°C. The working table width is 150 cm. The washer is equipped with a 110-liter tank that can be optionally thermally insulated to prevent the heated fluid from cooling too quickly. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner fluid, which, combined with the appropriate temperature and pressure from the spray gun nozzle, effortlessly removes all kinds of dirt. Standard equipment includes a high-pressure lance up to 140 bar, a compressed air gun, and a low-pressure overflow brush. The washer chamber is pneumatically lifted, with adjustable height, bright lighting, and air ventilation for the window to ensure user convenience. The design and construction of the Master Cleaner MC 1500 adhere to the highest quality standards, ISO 9001, and environmental protection standards, ISO 14001. It is ideal for removing dirt from steel, cast iron, and aluminum surfaces. The Master Cleaner MC1500 is equipped with a dedicated oil separator that effectively removes oil contaminants from the water in the washer’s tank. EQUIPMENT: - High-pressure nozzle: 140 bar - Low-pressure brush: up to 5 L/min - Compressed air gun: up to 8 bar - Air ventilation for the viewing window - LED lighting - Pneumatic chamber opening mechanism - Heated 110-liter tank - Dual liquid filtration system - Oil separator - Liquid level and temperature sensors - Adjustable height feet: up to 100 mm - Dual foot switch - XPOWER Active Cleaner (5L starter pack) OPTIONAL FEATURES: - Rotating basket - Spray arm - Rotary nozzle - Manifold cleaning nozzle - Thermal insulation for the tank TECHNICAL SPECIFICATIONS: - Weight: 230 kg - External dimensions - Open chamber (W x D x H): 175 x 85 x 235 cm - External dimensions - Closed chamber (W x D x H): 175 x 85 x 170 cm - Chamber dimensions (W x D x H): 150 x 64 x 65 cm - Heated fluid tank: 110 liters - Operating temperature: up to 45°C - Power supply: 3 x 400 V - Pneumatic power supply: 6 - 8 bar - Maximum power: 7.5 kW - Operating pump pressure: 140 bar Ljdpfsri Rn Ujx Ab Ujah - Dual liquid filtration system: Yes - High-pressure lance capacity: up to 15 L/min - Air connection: Pneumatic quick coupling DN7.2 plug - Manual washing with overflow brush: up to 5 L/min - Dual foot switch: Yes - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE MULTIPLE MODELS AVAILABLE - CONTACT US TO LEARN MORE.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, water tank capacity: 3,000 l, power: 300 kW (407.89 HP), year of last overhaul: 2025, water pressure: 1,000 bar, pump capacity: 131 l/min, Woma 325Z P30 diesel-driven high-pressure unit 1000 bar 131 l/min Well-functioning machine, ready for immediate use Machine built into a MAN TGA 26.320 6x2 year 2007 Euro 4 only 64,000 km truck is in top condition EXPORT ONLY Lajdpfexb Dp Asx Ab Ueh

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, total width: 2,400 mm, total length: 1,250 mm, total height: 1,150 mm, pressure: 2,000 bar, operating pressure: 2,000 bar, type of input current: AC, overall weight: 3,300 kg, rotational speed (max.): 1,500 rpm, power: 132 kW (179.47 HP), year of last overhaul: 2023, water pressure: 2,000 bar, pump capacity: 34 l/min, Equipment: type plate available, Stationary high-pressure pump unit Woma EG 250M-P20 on base frame. Similar but not Hammelmann, Kamat or Uraca. Pump type: 250M P20 Operating pressure: 2000 bar Flow rate: 34 l/min Drive speed: 1500 rpm Drive power: 132 kW With EMK electric motor, with pressure regulating valve, with safety valve. Lsdjxmkh Aepfx Ab Usah Dimensions LxWxH: approx. 1,250x2,400x1,150 mm Weight: approx. 3,300 kg Year of manufacture: 2013 Condition: In very good used condition. Pump has been serviced regularly, most recently at the end of November 2023. Documentation available.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, PTC Torpedo Hot Water 140°C and Steam 140°C/32bar Skid, similar to but not Dynajet, Oertzen, Falch, DIBO, ... Laedpfxjfdvldj Ab Ujh - Skid mounted on a hot-dip galvanized frame with forklift pockets. The following hot water models are available: Torpedo 23/250 | 23 l/min at 250 bar | Engine: Kohler KDW 1003 26kW Torpedo 23/350 | 23 l/min at 350 bar | Engine: Kohler KDW 1404 26kW - Dimensions with 680L water tank: 2,300 x 1,310 x 1,310 mm - Dimensions with 1,000L water tank: 2,300 x 1,310 x 1,630 mm - Unladen weight: approx. 600 kg - High-pressure pump: Comet RW/TW Premium - High-pressure hose reel: manual or automatic, max. 30 m 1/2" or 50 m 3/8" hose (included) - Water supply hose reel: manual with 50 m 3/4" hose - Diesel tank: 75L - Anti-scale pump with tank - 80/100 kW heating module - Options and accessories available on request

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE150 series is an electrically driven high pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE150-200-240 Lasdpfx Ajhga Scjb Ueh CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 60 Hz and others see data sheet and on request. General specifications: ----- Power of drive motor: 90 kW (50Hz) / 110 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD700 can easily handle cleaning applications with high flow and pressure requirements. The pump is powered by a 6-cylinder Volvo diesel engine. There are two variants of the engine with an exhaust system according to EU Stage V / US EPA Tier 4 final or with an exhaust system according to EU Stage 2 / US EPA Tier 2. The Stage V solution is a pure SCR exhaust system. The frame is manufactured to be corrosion-resistant and is primed and painted for an attractive appearance. The frame is equipped with rubber mounts and forklift pockets. The machine can be supplied either as an open frame solution or as a fully built-in solution in a trailer or container. The CD700 can be equipped with a manual gearbox, which allows the pump to be operated in several flow ranges and even manual operation in the lowest gear is possible. Similar but no Falch, Hammelmann, Kamat, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD700-1000 1000 bar 261 Lpm General specifications: ----- Max. Pump speed: 522 rpm Laedpfxehgblks Ab Uoh Drive engine: 6 cyl. Volvo Diesel EU Stage V or EU Stage II Power of the drive motor: 522 kW Drive engine speed: 1800 rpm Diesel tank: 800 L Max. Fuel consumption: 90 L/h Dimensions and weight on base frame: 3100mm x 1700mm x 2300 mm (5850 kg)

Condition: as good as new (ex-display), Year of construction: 2025, PTC CTR-C cold water trailer similar but no Dynajet, Oertzen, Falch, ROM, Rioned, Karo, ... - Single-axle trailer on hot-dip galvanized frame with support foot with wheel, parking brake, automatic reverse, stands, rear lights and reflectors, towing eye for 50 mm coupling, 13" tyres and ABS. The following cold water models are available: CTR-C 43/180 | 43l/min at 180bar | petrol engine: Honda GX690 17,7kW CTR-C 55/160 | 55l/min. at 160bar | petrol engine: Honda GX690 17,7kW CTR-C 60/150 | 60l/min. at 150bar | Diesel engine: Kohler KDW 1003 19kW CTR-C 20/350 | 20l/min. at 350bar | Diesel engine: Kohler KDW 1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 350 kg - High pressure pump: Comet TW Premium with integrated gearbox - HD-reel: manual with max. 60 m. 1/2" hose (included) - Water supply reel: manual with 35 m. 3/4" hose Lodpfofdvkrox Ab Ujah - Water tank: 400 l - Options such as radio remote control, booster pump, warning light, working light, aluminium cover for hoses and accessories on request

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD200 series of our high-pressure machines covers pressures from 200 to 2,800 bar and flow rates from 23 to 300 l/min. The pump is powered by a water-cooled 4-cylinder AGCO Stage V diesel engine. The entire frame is constructed from hot-dip galvanized steel, ensuring long durability and corrosion resistance. For an attractive appearance, the frame is primed and then painted. The machine’s dimensions are 2,250 x 950 mm. The frame is equipped at all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side bracket for protection and storage, for example for high-pressure hoses. Comparable but not the same as Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available SKID models: Model Pressure Flow rate CD200-200 200 bar 300 Lpm CD200-250 250 bar 250 Lpm CD200-1000 1000 bar 63 Lpm CD200-1380 1380 bar 42 Lpm CD200-2500 2500 bar 25 Lpm CD200-2800 2800 bar 23 Lpm OPTIONAL: TRAILER VERSION CDT200 General specifications: ----- Lajdpfx Abehgbhne Ush Max. pump speed: 560 rpm Drive engine: 4-cylinder AGCO Stage V diesel (optionally without AdBlue) Drive engine power: 149.1 kW Drive engine speed: 1,950 rpm Tank: 135 L for skid version, 200 L for trailer version Max. fuel consumption: 18-20 L/h Dimensions and unladen weight SKID: 2,170 mm x 1,350 mm x 1,810 mm (1,785 kg) Dimensions and unladen weight TRAILER: 3,800 mm x 1,900 mm x 2,000 mm (2,500 kg) Includes standard accessories.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE125 series is an electrically driven high pressure machine for a pressure of 200 to 2500 bar and a volume flow of 21 to 240 l/min. The frame consists of hot-dip galvanised sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE125-200-240 CE125-1500-35 Lajdehga Rxopfx Ab Ujh CE125-2500-21 60 Hz and others see data sheet and on request. General specifications: ----- Power of drive motor: 90 kW (50Hz) / 90 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 2150 mm x 1385 mm x 1750 mm Weight: 2000 kg Standard accessories included.

Year of construction: 2012, condition: excellent (used), Stationary high pressure pump unit Hammelmann HDP 47 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 477 Working pressure: 300 bar Delivery rate: 24 l/min. Drive speed: 1500 rpm. Drive power: 14 kW with AC motors ACM 160L-4/HE 3~ IP55 15kW electric motor, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.100x750x1.200 mm Lodpfx Aeh Uc Nkob Ueah Weight: approx. 570 kg Year of manufacture: 2012 Condition: In very good used condition.

Condition: good (used), Year of construction: 2009, pressure: 330 bar, operating pressure: 330 bar, Hammelmann HDP 77 stationary high-pressure pump unit on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 77 Operating pressure: 330 bar Delivery rate: 59 l/min. Drive speed: 1500 rpm. Laodpfxjrzuwmo Ab Ujh Drive power: 37 kW with Siemens 1LA6223-4AA60 electric motor 45 kW with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of construction: 2009 Condition: In good used condition.

Condition: as good as new (ex-display), Year of construction: 2025, PTC CTR-H Hot Water 95°C, Steam 140°C/32 bar, and High-Pressure Steam 150°C/200 bar (only for version 16 l/min and 350 bar). Trailer similar but not Dynajet, Oertzen, Falch, DIBO, etc. Lasdpfofdkaksx Ab Ueh - Single-axle trailer on galvanized frame with jockey wheel, parking brake, automatic reverse, support legs, rear lights and reflectors, towing eye for 50 mm coupling, 13" tires, and ABS. The following hot water models are available: CTR-H 21/200 | 21 l/min at 200 bar | Engine: Kohler KDW702 12.6 kW CTR-H 20/350 | 20 l/min at 350 bar | Engine: Kohler KDW1003 19 kW CTR-H 16/350 | 16 l/min at 350 bar | Engine: Kohler KDW1003 19 kW | High-pressure steam 150°C at 200 bar - Dimensions: 3,045 x 1,390 x 1,190 mm - Unladen weight: approx. 400 kg - High-pressure pump: Comet RW/TW Premium with integrated gearbox - HD hose reel: manual, max. 60 m 1/2" or 80 m 3/8" hose (included) - Water supply reel: manual, 35 m 3/4" hose - Water tank: 200 l - 75 kW heating module - Options such as warning light, automatic hose reel, and accessories available on request

Year of construction: 2022, condition: as good as new (ex-display), High pressure cleaning unit, high pressure flushing unit, high pressure built-in flushing unit on hot galvanized and painted high quality steel frame with forklift lugs suitable for installation in company vehicles. PTC Salmon similar but no Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/150 | 60l/min. at 150bar | Engine: Kohler 19kW Salmon 45/200 | 45l/min. at 200bar | Motor: Kohler 19kW Salmon 35/250 | 35l/min. at 250bar | Motor: Kohler 19kW Salmon 30/300 | 30l/min. at 300bar | Motor: Kohler 19kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1.250x1.200 mm. dimensions with 400l water tank LxWxH: ca. 1.220x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 1.670x1.250x1.200 mm Empty weight without water tank: approx. 370 kg Empty weight with 400l water tank: approx. 400 kg Empty weight with 800l water tank: approx. 430 kg HIGH PRESSURE PUMP: - Manufacturer: HPP - Model: CLW - Flow rate: 30 - 60 l/min. - Working pressure: 150 - 300 bar MOTOR: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max power: 26 hp (19 kW) CONTROL PANEL: - Start button - Operating hours counter - Electronic fuel gauge - LED indicators for oil temperature, low lubrication oil pressure, clogged air filter, RPM, alternator and spark plugs - Emergency stop button ELECTRICAL OPERATION: - On / off hydraulic hose reel; - On / Off bypass; - Speed control +/-; - Emergency stop button; - Switching to radio remote control; INSTALLED ALARM: - Low water protection against dry running of the high pressure pump with automatic shutdown function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH PRESSURE HOSE REEL: - Type: electric hose reel - Material: stainless steel Ljdjiky H Sepfx Ab Uoah - Capacity: max. 80 m ½" u. 80 m 3/8" high pressure hose. - Hose: 80 m ½" high pressure hose (included) - Hose guide: manual LOW PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 35 m ¾" low pressure hose - Hose: 35 m ¾" low pressure hose (included). WATER FILTER: - With washable cartridge and drain valve . - Filtration degree: 50 mesh INCLUDED: - Multifunction radio remote control IMET; - On / Off motor; - On / Off Bypass; - Speed control +/-; - Winding / unwinding hydraulic hose reel; - Emergency stop button; - Battery charger for radio remote control; - 400 or 800 l (with steel frame) polyethylene water tank; OPTIONAL ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½" high pressure hose; - 50, 60 or 80 m 3/8" high pressure hose with G3/4" connection; ACCESSORIES ON REQUEST: - Kit STORZ for connection to the water hydrant; - Kit UNI 45 ; - Version with 2 HD reels; - Mobile hot water generator 10 kW - 12 VDC; - Kit high pressure spray gun, swivel and quick coupling; - Kit high pressure lance with flat jet nozzle 15° / rotating nozzle; - Kit lance for high flow; - Kit rotary nozzles; - Kit double head nozzles; - Kit water sand lance; - Kit detergent dispenser; - Step cleaner; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Other accessories on request

Year of construction: 2008, condition: excellent (used), Stationary high pressure pump unit Hammelmann HDP 77 on base frame. Similar/no Uraca, Woma, Kamat Pump type: HDP 77 Working pressure: 490 bar Laedpfx Abod Rmqpe Ush Delivery rate: 59 l/min. Drive speed: 1800 RPM Driving power: 65 kW with AC 55 kW 3~motor AH 250 M-4; 400V; 50 Hz with frequency converter dimensions LxWxH: approx. 1665x1212x1641 mm weight: approx. 1050 kg year of construction: 2008 Condition: in very good used condition. Including complete documentation.