Year of construction: 2000, Condition: good (used), used drum shot blast machine Brand: OMSG Type: ROTOFLOW Model: 170-N Year 2000 Registration: 10371/00 Continuous belt shot blasting machine for sandblasting/shot blasting aluminum injection, brass or steel forgings, screws and bolts. Automatic feeding tower. Max unit weight of the piece: 8kg 9Ylccyoo7Y Turbines: 2 x 11kw Turbine diameter: 350mm inverter turbines Special two position valves Filter CURRENT STATUS: Disassembled and stored in our facilities.

Condition: used, Year of construction: 2017, Technical details: container volume: 200 l Total weight, approx.: 220 kg Beohtjjeom dimensions L x W x H: 1,2 x 1,1 x 1,8 m Mobile pressure blasting pot - Sand blasting system Blasting tank pressure up to 12 bar Test pressure 17.2 bar Ideally equipped with: -with remote control valve -with remote control lever -with electro-pneumatic remote control -with carbide spray nozzle incl. 10 m nozzle hose i.D. *

Condition: ready for operation (used), Year of construction: 1995, UV oven IST 1+2 lamps, 1 stearing cabinet Model: IST Type: HL 140 Year: 1995 Techn. info: Through feed width: 1600 mm IST-lamps type: CK 1400 U1 Power: 400 V, 50 Hz Stearing paower: 230 V, 50 Hz Lamp efficiency: 100 W/cm (14 kW/lamp) Energi consumption: 145 A Bjppefburu Size of oven 1-lamp (lxw): 2580x2540 mm Size of oven 2-lamps (lxw): 3020x2540 mm Control electric cabinet (lxwxh): 1600x600x2000 mm Stock no: 2000351

Year of construction: 2020, Condition: ready for operation (used), ALUMINIUM QUENCHING FURNACE Main features Brand Sistem teknik Model DBSAF-2500-1507-1830 Year of acquisition 2020 Heating method Electric Capacity 1000 Kg Al + 1500 Kg Fe Basket and mixtures Useful dimensions L 2,500 mm x W 2,500 mm x H 2,500 mm Useful volume of the furnace 9 m3 Approximate dimensions of the civil engineering L 7,700 mm x W 20,550 mm x H 8,700 mm Heating time with max. load 2.5-3 h (20 - 540 ° C) Quenching tank volume 34.000 lt (Switch-off delay time: 5.5 sn. after opening the doors) Maximum temperature 650 ° C Operating temperature 150 - 600 ° C Operating range * B Vertical air flow 4.5 m / s Temperature homogeneity ± 5 ° C (atmosphere) Number and type of electric heating elements 2 ea. ST heater (NIKROTHAL 80 Elements) Vertically mounted radiator installation Total installed heating power 280 kW Quenching tank heating capacity 90 KW Total installed power 455 kW Circulation fans 2ea. 70,000 m3 / h, 176 mmWC, 740 rpm, 37 kW Instrumentation Type according to AMS2750E YES * Please attach a copy of the latest pyrometric exploration as well as the latest test of the measurement chain accuracy (SAT) QUENCHING OVEN Temperature control Atmosphere (or medium) Type and brand PLC SIEMENS S7 1200 Nature Ambient air Number 2 Vacuum NA Type of thermocouples N Leakage rate NA Dew point NA Recording Quenching medium Type and brand SCADA Nature N/A Number of channels 15 Capacity 34 m3 Recording speed Modulable Additive N/A Rate (Nb °C/cm) Modulable Pressure N/A Type of thermocouples N Temperature 65 °C Recording capacity Bfuplrlgja under load NA Transfer time maximum 15

Year of construction: 1989, Condition: used, max. temperature 1000 Grad size of opening 170 x 90 mm depth of chamber 280 mm total power requirement 3 kW Gg3Gu2Rep weight of the machine ca. 80 kg dimensions 0,7 x 0,55 x 0,72 m

Condition: excellent (used), Year of construction: 2004, WIRE BELT BLAST MACHINE MANUFACTURER: RÖSLER WIRE BELT BLAST MACHINE BRAND: RÖSLER Manufacturer: Rösler Type: RDGE 800-4 Year of manufacture: 2004 Passage width: 800mm Passage height: 550mm Spinning wheel: 4 pieces with frequency converter, Filter system: wet filter system With several inlet and outlet belts. Incl., control cabinet, complete documentation, etc. TOP condition! System is dismantled! WIRE BELT BLAST MACHINE BRAND : RÖSLER Brand: Rösler Type: RDGE 800-4 Year: 2004 Belt Width : 800mm Inlethigh: 550mm Turbine: 4 Pieces with Drivers Filter: Wet Filter With many inlet- and outlet transport belt Incld. Main Panel, complete Doku Very good condition! Machine it s now desmantly Price: Loading on Truck Price: Loading on Truck Warranty: 6-month function and warranty guarantee when commissioned by DECK Sarl. Spare parts supply for the next 10 years Warranty: 6-month Functions- and warranty from DECK Sarl. When DECK Sarl. make the assembly OPTIONAL: Delivery to your factory: Assembly / commissioning / training B777Y9Tzu0 Assembly by foreman We also offer spare parts for Rösler, Schlick, Wheelabrator, Gietart etc. blasting machines! We can offert for spare parts for Rösler, Shot Blasting Machines!

Condition: used, Powder Coating Plant - Automatic The plant moves with conveyor system. The material to be powder coated is hung on the line, the system automatically follows the steps below and powder coats the material after cleaning it. Drheiz The best project suitable for the existing facility is made. Special design is made according to the customer's product and needs.

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, Vertical painting line for aluminum profiles. It's in full operation and ready for use. It's available for inspection while it's working until early December 2024, afterwards it will be turned off for dismantling. Brvejwadkwo

Condition: new, Year of construction: 2024, Functionality: fully functional, Our Sapi blasting halls A crucial component for excellent surface treatment SAPI sandblasting halls and systems with 50 years of tradition and proven quality Sandblasting halls are designed for industrial and commercial use and provide a safe environment for all types of blasting work. Cccoslw These halls typically consist of a blasting room, an abrasive recovery system with filter and dust extraction system, lighting and various safety devices. In the blast room itself, the user is guaranteed a safe environment. The recovery system is used to collect, separate and reuse the blast media used, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall is clean and safe. Lighting and safety equipment are also important components of a sandblasting hall and ensure that the operator can see well and is protected from potential hazards.

Condition: new, operating hours: 1 h, For sale are 2 sandblasting machines, price per unit 5000€ Cavs7Swbcc

Condition: good (used), Year of construction: 2013, machine/vehicle number: 1305, Offer 21369 Technical Specifications - 4-stage oil mist separation - Electrostatic air filter with filter elements - Pre-separation with washable pore filter - Fine filtration with compact filter - HEPA filter (H 13) - Air flow rate approx. 4000 m³/h - Extraction pipe diameter 315 mm - Drive - Fan 400 V / 3 kW - Space requirement approx. W 750 x H 2900 x D 750 mm Drgwmd - Weight approx. 500 kg

Condition: excellent (used), Functionality: fully functional, BMB TUA-200/2 coating system in top condition. Purchased: 2023 (as good as new) and in use for only 6 months. Version: Professional version (very good features) - High-speed coating up to 4x faster - 3 coating processes in one system Caodsmmmby - Suitable for components up to 1200x570mm - Permanent viscosity/temperature control - Full traceability (depending on version) - Tool recognition and parameterization - Maximum protection by coating the components with paint - (Digital work document system, under development) - Large paint tank volume for tall components - Paint consumption calculation - Innovative, robust, and proven technology With the BMB Traceability and PDM system (equipment under development), you can track at any time which component was produced when, where, by whom, and how. ISO/TS 16949 requirements are met. When setting up a tool, the PDM system automatically recognizes all the necessary coating parameters. Work instructions, videos, technical data sheets, processing instructions, etc. Everything in its place! 19" swiveling Smart Touch Panel Viscosity control Tool monitoring: Automatic detection and adjustment Machine electrically height-adjustable Coating processes: - DipCoat dip coating - Selective Contact Coating (SCC®) - Selective Transfer Coating (STC®) The system can be shipped by freight forwarder upon request. #8300

Condition: new, Functionality: fully functional, Year of construction: 2025, Aluminum Aging Furnace is the furnace where the precipitation hardening, i.e. aging process, of the aluminum profiles drawn in the extrusion line is performed. Aluminum thermalization furnaces harden the porous structure of aluminum by subjecting the profiles kept between the specified temperature and time periods to the aging process. As HAS MAKİNA POWDER PAINTING SYSTEMS, we design and manufacture furnace production in various sizes and capacities in accordance with the demand and intended use within the necessary engineering calculations for our valued customers. Profile Thermalization Furnace, Aluminum Thermalization Furnace, Thermal oven, Aluminum aging furnace, Cbmoanbdhm Profile thermalization furnace,

Condition: new, Model Name Uorjj78Uol SSK 4

Condition: new, Basic TWO sandblasting container Introducing the SAPI Basic TWO sandblasting container-a true milestone in the sandblasting industry, designed with double container space to maximize functionality and efficiency. With its spacious layout and innovative features, this sandblasting solution is perfect for professionals who need more space for their work without compromising on quality and performance. The ideal solution for maximum efficiency: The SAPI Basic TWO sandblasting container For companies looking for a comprehensive, practical and high-quality solution for their sandblasting projects, the SAPI Basic TWO sandblasting container is the ideal choice. With its exceptional equipment and sophisticated design, it brings a new dimension of productivity and quality to the sandblasting industry. More than just a container: a complete solution for professionals The SAPI Basic TWO sandblasting container offers a perfect balance between space, functionality and advanced technology. Thanks to its innovative design and equipment, it is not just a simple container, but a fully operational solution that takes sandblasting work to a new level of efficiency, effectiveness and safety. Whether for large projects with extensive requirements or intricate detail work, this setup provides the space, tools and features to get the job done efficiently, safely and professionally. Key features Spacious sandblasting area and technical room: This double container design offers plenty of space for sandblasting work and a separate technical room, allowing for an optimized workflow and easy access to important equipment. Plug-and-play convenience: The SAPI Basic TWO sandblasting container is designed for ease of use and requires minimal installation, so you can quickly get started with your sandblasting tasks. Improved air quality: Equipped with the SAPI Air Filter, our container ensures a cleaner and healthier working environment by effectively controlling dust and particles. Uoey0797H9 Dual cleaning modes with the 5kW Abrasive Vacuum Turbo Cleaner: Efficiently handle abrasive recovery and cleaning with two modes for maximum flexibility and control during operation. Durable, rubberized walls: The interior walls of the container are lined with durable rubber to withstand intensive sandblasting operations and extend the life of the work area. Bright, well-lit work areas: Three powerful LED lights are strategically positioned to ensure optimal visibility and promote precision and safety during sandblasting. Robust premium 200-liter sandblasting system with cyclone cleaning: The powerful 200-liter system ensures efficient and continuous sandblasting, while the integrated cyclone cleaning mechanism improves abrasive quality, reduces waste and increases productivity. Blast room dimensions Depth 4.40 m Overall width 2.25 m Overall height 2.65 m

Condition: used, Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 4912, We offer the Plasmatreat plasma machine including all accessories. The system was used for a small PCB table. It includes 2 nozzles. Main features Digital high-frequency plasma generator, system control and power control via integrated microcontroller Uy8Kbmh Touch control panel for status and error message display and ergonomic operation Integrated service manual Power: 2kVA (FG5002) Operating temperature range: 0-40 degrees Celsius Service installation in a control cabinet. Extensive monitoring functions for maximum process reliability and reproducibility.

Year of construction: 2025, Condition: new, Functionality: fully functional, - Box Type GAS Oven: Length:400cm, Width:200cm, Height:250cm - Powder Coating Booth with Cartridge Filter: Length:350, Width:150, Height:200cm Drgw8H - Electrostatic Powder Coating Equipment: Painting Spray Gun Model: HMK MULTICOLOR, Type of Use: Manual Electrostatic Powder Coating Plant For those interested. More photos, videos by E-mail, More information by phone.

Condition: new, Effective surface preparation and cleaning SAPI sandblasting booths are enclosed work areas designed for sandblasting or shot blasting operations. These booths are used to contain the abrasive and prevent the spread of dust and dirt during the blasting process. SAPI, a brand trusted by companies throughout Europe. INJECTOR Sandblasting cabinets The benefits and applications of injector sandblasting cabinets Injector sandblasting cabinets use an air-driven venturi system to create a vacuum that draws abrasive into the air stream. The abrasive is then propelled out of the blast nozzle at high velocity where it strikes the surface to be cleaned or prepared. Injector sandblasting is typically used for lighter applications. PRESSURE Sandblasting booths Advantages and applications of pressure sandblasting cabinets Pressurized sandblasting cabinets use a pressurized container to force abrasive blast media out of the blast nozzle. The pressure generated by the container accelerates the abrasive blast media to high velocities, allowing for more efficient and powerful blasting. Pressure sandblasting is typically used for heavier applications. MM2010 Pressurized sand blasting cabinets Efficient and reliable with integrated filter and material recycling system The MM 2010 pressure blast cabinet from SAPI is the ultimate solution for companies that require fast turnaround times and no downtime for cleaning. Gxc2Hkq Equipped with a powerful pressure tank and an automatic material recycling system, this cabinet offers efficient and cost-effective blasting with minimal manual intervention. *Please note that an additional filter system is required for all our injector sandblasting cabinets, with the exception of cabinets with an integrated filter system. These filter systems are our Turbo series (I, II or III), our cartridge filters PC 1 / PC 2 or our pocket filter models TFA 1 / TFA 2 . We offer all necessary filter systems, as well as customized solutions when required, to ensure efficient and safe operation of our sandblasting cabinets.

Condition: new, Powder coating is a highly effective and widely used method of applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder of resin, pigments and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface and forms a uniform coating. Ul3Eik3E29 To achieve optimum adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively with the substrate to achieve a strong and long-lasting coating.

Condition: new, The SAPI Mammut sandblasting machines with QUICK STOP™ device are powerful industrial sandblasting machines used in various industries such as automotive, construction and manufacturing. These machines are designed for fast and efficient surface preparation, cleaning and processing of metal, concrete and other surfaces. The SAPI QUICK STOP™ device is a safety feature designed to prevent accidents and damage to the device. It works by immediately stopping the blasting process as soon as the operator releases the control handle. The sandblasting flow is immediately interrupted. This safety system can prevent accidents and protect the appliance from damage caused by overuse. Efficiency and durability The QUICK STOP™ system reduces air and fuel consumption, resulting in a more efficient and cost-effective sandblasting process. The Mammut sandblasting machine is robustly built and consists of high-quality components that perform consistently even under the toughest conditions. All our machines are fully CE and TÜV compliant. Flexibility and versatility Beizxsy The machine is available in different volume sizes to suit different sandblasting needs. A wide range of abrasive materials can be used, from normal sand to special plastic or metallic blasting materials. Our Mammoth with QUICK STOP™ can be used for a variety of applications including surface preparation, cleaning and removal of rust, paint and coatings. Precision and ease of use Our Mammut with QUICK STOP™ offers precise control and adjustment of pressure even during the sandblasting process, resulting in consistent results and high accuracy. In addition, our machines are equipped with easily accessible inspection and maintenance openings. Safety The QUICK STOP™ system with a dead man's switch ensures maximum safety during sandblasting operation. QUICK STOP™ also prevents the accumulation of moisture inside the machine, as the pressure is kept constant even when sandblasting is stopped. This is not the case with "normal" single-outlet technology, for example. All Mammut sandblasting machines with QUICK STOP™ are fully equipped right from the start. Our range usually includes sandblasting hose, nozzle, pressure control valve, water separator, sand dosing valve and basic personal protective equipment.

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: SAPI Jumbo, This ready-to-use, assembled, walk-in JUMBO blast cabinet offers a comprehensive solution for efficient blasting work. Equipped with 2 LED blast cabinet lights, it ensures optimum illumination of the work area. The double-leaf door allows easy access and handling of larger workpieces, while the blast protection rubber on the walls protects the interior from wear and tear and extends the service life of the cabinet. Gxcwvem For air filtration and dust reduction, the cabin is equipped with a powerful cartridge filter and an impact separator to ensure a clean working environment. The flat conveyor system in the floor with grating cover ensures automatic return transportation of the abrasive, and the electric drive unit for the conveyor system ensures smooth operation. In addition, the cabin is equipped with a bucket elevator and a high-performance abrasive conditioner to efficiently process and reuse the abrasive. The pressure blasting pot with a capacity of 38 liters offers sufficient capacity for longer work cycles. The scope of delivery also includes a 10-metre blasting hose and a durable boron carbide nozzle, which ensure optimum blasting results. This blast cabinet is ideal for companies looking for a reliable and efficient solution for blasting work. *Special equipment such as a loading trolley is also possible* Compressed air and electrical supply as well as the installations are provided by the customer. If we have aroused your interest, you are welcome to contact us at any time!

Condition: new, Year of construction: 2024, Functionality: fully functional, warranty duration: 12 months, total width: 2,438 mm, total height: 2,896 mm, total length: 6,058 mm, overall weight: 3,300 kg, workpiece weight (max.): 5,000 kg, filter area: 40 m², outer dimension width: 850 mm, outer dimension length: 900 mm, tank capacity: 200 l, Equipment: lighting, We offer an absolute novelty: A high-quality Highcube container for indoor and outdoor installation. This container is made of durable Corten steel and guarantees a service life of at least 30 years. The container is fully compacted, windproof and waterproof. Included is a Premium 200 pressure blasting unit with manual abrasive preparation, which can use and prepare any common reusable abrasive and with an integrated filter system in the container (with impact pre-separator, connecting elements etc.) The container is also already equipped with electrics and LED lamps. Ideal for a wide range of applications - robust, safe and ready for immediate use! It is also possible to rent or lease this container (e.g. leasing from €475/month) Transportation is also possible by arrangement and can be requested at daily rates. If you are interested or have any questions, please do not hesitate to contact me! If you need further details or an offer, please feel free to contact me directly at any time and I will be happy to help you! We are also happy to offer installment plan and leasing for this sandblasting container. Dptkyz If you are interested or would like a quotation, please feel free to contact Mr. Andreas Wallner at any time.

Condition: new, Year of construction: 2024, Functionality: fully functional, Equipment: lighting, of the new generation must meet higher requirements than was the case a few years ago. C93Ee9E The consideration of new paint systems such as hydro paints, polyurethane resin, epoxy zinc dust or epoxy micaceous iron ore paints places high demands on a sophisticated paint room system solution. An important criterion is the transport of workpieces to the painting system and for further processing. Our engineers offer you expert advice. Whether paint mist dry separation or wet washing, air humidification or air drying, condensation drying in a low-temperature process or hot air drying, whether pre-treatment of the workpieces by high-pressure washing with water flow in a circulation system or by compressed air blasting or wheel blasting technology.

Condition: new, pressure: 12 bar, Innovative dust-free sandblasting machines combine the performance of conventional sandblasting with a vacuum system that collects all dust and removed materials during work. This not only eliminates the need for extensive cleaning work, but also protects the operator and people in the vicinity from the harmful effects of airborne particles. With a dust-free sandblasting machine, you can carry out cleaning and surface preparation faster and more efficiently. And thanks to the intuitive controls and user-friendly design, these machines are easy to operate, even for novice sandblasters. PR 50 Dust-free sandblasting machine With its versatile application options, the PR 50 can handle a variety of surfaces, from hard metal to delicate glass. Our PR 50 is an excellent choice for anyone working in the automotive, construction or cleaning industries, to name but a few. Thanks to its compact size and handy design, it is easy to use and transport. Even for those who are new to sandblasting. Beizyly DINO II & DINO MASTER Available in 60 and 100 liter versions The SAPI pressure-suction sandblasting unit "DINO" is a compact and universally applicable device. It is characterized by its robust design and mobility. The blasting performance depends on various factors such as surface quality, compressor capacity, type of abrasive, etc. The cleaning performance is 3 - 10m² / hour. All in all, this device offers the worker a clean working environment, low abrasive consumption (due to the back suction unit) and lower waste disposal costs. The device is used in the steel, shipbuilding and petroleum industries as well as for maintenance work in the construction sector, by stonemasons, etc.

Condition: new, Equipment: lighting, Take your painting process to a new level - with mobile convenience. Mobile paint booths in container design for painting and coating various objects. They are specially designed for mobility so that they can be easily transported and set up on different construction sites. The booth is usually equipped with a ventilation system to ensure air quality, lighting and a filter system that prevents paint mist from escaping. Ul3Ky8Tgof The ventilation system ensures that the vapors and particles released during painting are kept inside the booth so that there is no danger to the environment. Mobile paint booths are a practical and flexible solution for companies that need an effective painting system that can be moved from one construction site to another at any time. Overview of the design and functions Our mobile 20-foot Sapi painting containers consist of a robust steel frame with welded wall and ceiling panels. Inside, we can add special equipment such as cranes or lifting devices. The floor is made of tear plate. There are ventilation grilles in both door leaves, which are fitted with fine-pored filter mats. One leaf is designed as an escape door for safety reasons and has a viewing window. It should also be mentioned that these are not simply converted shipping containers! We manufacture all our containers from scratch ourselves. We only use the most stable materials that meet the requirements and have also been tested and proven in terms of safety. Normal shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction wall for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with baffle plates including various suspension and fastening elements for the filter equipment. The powerful and EX-protected extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Next-generation mobile spray booths: meeting EU requirements and advancing coating solutions The new generation of mobile spray booths must meet the highest EU requirements. The consideration of new paint systems such as hydro paints, polyurethane resins, epoxy-zinc dust or epoxy-iron-mica paints places high demands on existing paint booths. That is why we have developed a new and unique mobile paint booth for the next generation of coating solutions. An important criterion is the transportation of the workpieces for painting and for further processing steps. Do you need more information? Our engineers can offer expert advice and support. Whether paint mist dry separation or wet scrubbing, air humidification or air drying, condensation drying in a low-temperature process or hot air drying, whether pre-treatment of the workpieces by high-pressure washing with water flow in a circulation system or by compressed air blasting or wheel blasting technology.