Condition: as good as new (ex-display), table length: 500 mm, table width: 300 mm, Flat grinding machine Ziersch Z35 - demonstration machine unused - Dslq Stevvwf Djdiskl Grinding area: 500mm x 350mm Dresser Permanent magnet Belt filter system with magnetic separator

Condition: good (used), Functionality: fully functional, machine/vehicle number: 542, Equipment: Precision six-jaw chuck -- Cylindrical grinding device -- Dividing device -- Coolant device -- Grinding wheel holder -- Grinding wheels --- Dslqjv Eyacj Stdiokl Operating instructions .

Year of construction: 1978, Condition: good (used), Functionality: fully functional, manual flanking machine Dslq Stdsv Rqunjiskl

Condition: reconditioned (used), Year of construction: 1982, Functionality: fully functional, grinding length: 600 mm, grinding width: 250 mm, grinding wheel diameter: 250 mm, grinding spindle speed: 3,000 rpm, power: 3.5 kW (4.76 HP), Equipment: rotational speed infinitely variable, JUNG JF520 Dslsh E Ix Djq Stdiekl Mechanically and electrically inspected and functionally tested by our JUNG specialists Wearing parts replaced Geometry overhauled according to the JUNG new machine protocol - Grinding area: 600 x 250 mm - Stepper motor feed - 2-axis HEIDENHEAIN digital display - Holding force control - Used magnetic chuck - Used paper belt filter 6-week parts warranty Delivery time: short notice We are happy to accept your used JUNG grinding machine as part payment

Condition: excellent (used), Functionality: fully functional, grinding length: 1,200 mm, Hidroprecis Tangential Grinding Machine model RSPB 1200, machine with electromagnetic chuck of 1200x 500mm, table stroke 1350mm, grindable surface 1200 x 600mm, maximum grindable height 575mm cross stroke 550mm, useful table support plane 1200 x 400mm, magnetic chuck height 110mm, grinding wheel motor power 10hp 1500rpm, grinding wheel diameter 400 x 127 x 50mm -400x127x100mm, machine with diamond dresser, machine in good condition, estimated weight 5500kg Dkolq Ssv Rnivetdiel

Condition: refurbished (used), Year of construction: 2025, Functionality: fully functional, grinding length: 500 mm, grinding width: 200 mm, AVAILABLE IMMEDIATELY FROM STOCK! Please contact us. Machine can be inspected under power at any time Grinding area: 500 x 200 x 400 mm (400mm between grinding spindle center and table) New electrics and control: - completely new electrics, cabling and conversion to 24V control voltage - 5.5 KW Siemens grinding spindle motor, so no generator cabinet is required, stepless speed control - Sensor control of the X and Z axis switching points - Cross table control via Siemens frequency converter and PLC - 2-axis digital measuring system - Programmable limit switch for the vertical/Y axis - Conversion of the cross table operation to eye level - Machine control in the usual position, with individual shutdown function Condition of the machine: - Geometrically overhauled Dkslqob A D Nlj Stdiel - Grinding spindle concentricity within 3µm - Completely new electrics VDE compliant - 5.5 kW Grinding spindle drive with new control, no more shelf cabinet - professional repainting in RAL 7035 / 7012 - CE declaration of conformity Equipment: - Magnetic clamping plate - 24V magnetic control with holding force control and demagnetization - Side dresser - Grinding wheel flange with disc

Condition: ready for operation (used), For sale is a square grinding machine in very good condition! It produced the back square of the tap! Dkolq Ssv Rlt Sjtdijl Accurate, fast machine! Selling due to lack of use!

Condition: good (used), Year of construction: 2002, Functionality: fully functional, center height: 180 mm, grinding length: 1,000 mm, center width: 1,000 mm, grinding wheel diameter: 400 mm, grinding diameter: 360 mm, controller model: Steuerung Siemens 840 D, TECHNICAL DETAILS Grinding length: 1,000 mm Center height: 180 mm Center width: 1,000 mm Grinding diameter: 360 mm Grinding wheel diameter: 400 mm Control: Siemens 840 D Djlq Stdov Rfz Ajiokl EQUIPMENT - Grinding detection - Coolant system - Internal grinding spindle - Flanges

Condition: used, Year of construction: 1969, Functionality: fully functional, Finimax peripheral grinding machine MAX-DS Dolq Stjv Rqbzjdiokl

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 1040-0016, STUDER S22 Cylindrical Grinder (used) Mfd 2010 Serial #: 1040-0016 with Auto-Load and Fanuc Robot load system, low hours, well maintained, many spares and extra wheels, fixtures, etc. Available immediately. It has straight, fixed wheel-head and was set up for OD’s only. It can grind multiple OD’s simultaneously, but does not do ID’s or faces on the work piece. Ideally suited for a Delqsv Dazwj Stdijkl production environment. SPECIFICATIONS SWING: 14" PLAIN OR ANGLE HEAD: Plain GRINDING WHEEL DIA.: 24" CONTROL: CNC (Fanuc) The S22 is a production platform for the mass production of medium-sized workpieces. It has distances between centres of 650mm (25.6") / 1100mm (43.3") and centre heights of 175mm (6.9") / 225mm (8.8"). It can machine workpieces with a maximum weight of 150kg (330lbs). The S22 with its extensive expansion options can be configured for every grinding application to be the perfect production machine. Highly dynamic axis drives, high-quality STUDER guideway systems, short reaction times and optimized traverses form the basis of the S22. The high-speed grinding option (HSG) contributes to increasing productivity with its peripheral speed of up to 140m/s (27,600 sfpm). Hardware: GranitanR S103 mineral casting machine base Cross slide X: anti-friction guideways with ball-screw Longitudinal slide Z: guideway with patented surface structure and ballscrew drive C-axis for the workhead Application-specific workhead concepts Additional NC axis for profiling the grinding wheel Full enclosure with movable front panels for optimal accessibility Integrated loading unit or loading cell for loading and unloading from left, right or above Large range of accessories Software: Easy programming with StuderWIN on Fanuc 31i-A StuderGRIND programming software to create grinding and dressing programs Standardized interfaces for loader and peripheral devices EQUIPPED WITH Fanuc 31i-A control Full C Axis work head 24" fixed straight wheel Auto Load Fanuc Robot System Fixtures Extra Wheels Spare Parts Low Hours Extremely well maintained

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 120 mm, travel distance W-axis: 450 mm, The machine was recently partially overhauled at a cost of €15,000! The machine features six high-quality grinding motors, a spur motor, and turbines. TECHNICAL DETAILS Distance between column and spindle: 365 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm Travel paths X-axis: 500 mm Y-axis: 350 mm Z-axis: 120 mm W-axis: 450 mm U-axis: 5.5 mm Taper grinding: max. 16° Table Table size: 600 x 380 mm T-slots: 6, 10 mm wide, 50 mm spacing Table load: 300 kg Tool holder and speeds 22S: E23 Speed 22S: 4,500 - 22,500 rpm 45S/45ST: E19 Speed 45S/45ST: 9,000 - 45,000 rpm 80S: F6 80S speed: 40,000 - 80,000 rpm T10/T16: Ø 3 mm T10/T16 speed: 100,000 / 160,000 rpm Groove grinder: 2,900 - 34,500 rpm Planetary motion: 5 - 250 rpm C-axis: 0 - 5 rpm Feed rates X/Y feed: 0 - 1,200 mm/min W-axis feed: 900 mm/min Z-axis feed: 0.5 - 12,000 mm/min MACHINE DETAILS Digital measurement accuracy: 0.001 mm Basic deviation: 0.003 mm Dkolev Rck Uoq Stdiol Power: 7.5 kW Compressed air requirement: 20 m³ Mains pressure: 5 bar Space requirement: 3.5 x 4.4 m Machine height: 3.5 m Power consumption: 8.3 kVA Weight: 3.1 t EQUIPMENT - Groove grinder - Rotary table, 300 mm diameter - Swivel table, 200 mm diameter - Coolant system - Extraction system - High-quality accessories included

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Grinding headstock Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 12 kW Speed control: with frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece spindle Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dslev Rck Ioq Stdiokl Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Speed control: with frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA

Condition: new, Year of construction: 2025, The brush grinding machine with a base, equipped with 250 mm diameter wire brushes included in the set, makes this model ideal for both professional applications and hobbyists. The stable and rigid construction ensures quiet operation with no vibrations. Description of the CORMAK BMS2080 twin-brush sander Rotor design based on bearings from the world's best manufacturer NSK, for quiet and smooth operation and long machine life Powerful drive motor with high torque Main switch and safety ‘mushroom’ switch Dkolq Sovlkm Tstdiol Adjustable, sturdy workpiece supports Robust, stable base with tool cabinet Equipped with 50 mm diameter suction port, with possibility of connecting an extraction unit Technical data of the grinder BMS2080 SANDER DISPLAY SIZE 250 x 80 mm disc or grinding wheel bore 25,4 mm suction nozzle diameter 2 x 50 mm RPM NUMBER 1450 rpm MOTOR POWER S1 2,2 kW MOTOR POWER S6 3,0 kW VOLTAGE 400 V DIMENSIONS 800 x 440 x 1170 mm WEIGHT OK. 95 kg

Year of construction: 2003, Condition: as good as new (ex-display), Exhibition machine: ACETI AC 02 Stationary edge milling and belt sanding machine Sanding belt: 120x1500mm Machine is in our showroom in Kobenz. Machine is as good as new and not run! Power: 1,8 KW Weight: 120 KG Size: 700 x 600 x H. 1600 mm Data grinding unit: Contact rollers: 135 mm diameter Cutting speed: 10 - 20 m/sec dimensions of working surface: 120 x 470 mm Data edge milling unit: Chamfer angle: 15° - 45° cutter diameter: 80 mm dimensions of the support: 100 x 500 mm Dslq Ssiknxgjtdiokl

Condition: used, Year of construction: 1967, Functionality: fully functional, Finimax DUO flank grinding machine, Dkoljv Rqa Djq Stdijl suitable for flank grinding 320 to 1720 Ø

Condition: good (used), Year of construction: 2005, Machine type: cylindrical grinding machine Manufacturer: Junker Model: Jumat 5340/s Serial number: 2328 Year of manufacture: 2005 Dolekyrqijq Stdiskl Available immediately Ex site for self dismantling Optionally we can offer dismantling and loading

Condition: not inspected (used), Year of construction: 1991, magnetic table 160 x 400 mm Dkelq Stev Eny Djdiel

Condition: ready for operation (used), For sale Vollmer CE Tandem 1300 in good working condition. Dkslsv N Hz Ijq Stdijl She can sharpen circular blades up to 1300mm

Condition: used, Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 20699, total height: 2,200 mm, total length: 2,980 mm, total width: 1,470 mm, spindle speed (max.): 9,000 rpm, spindle speed (min.): 1,000 rpm, type of input current: three-phase, grinding wheel diameter: 250 mm, overall weight: 4,000 kg, rotational speed (min.): 1,000 rpm, rotational speed (max.): 9,000 rpm, travel distance X-axis: 360 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 270 mm, power: 9 kW (12.24 HP), Equipment: rotational speed infinitely variable, Description: 5-axis CNC-controlled tool grinding machine Brand Schneeberger, type Gemini DMR, machine number 20699, built in 2004, Fanuc 160 i MB control system, Windows 2000 Description: Suitable for regrinding and remaking all types of wood and metalworking tools. Technical specifications: X-axis longitudinal movement 360 mm, Y-axis transverse movement 270 mm, Z-axis vertical movement 270 mm, C-axis swivel range 370°, ISO 50 workpiece holder, center height 210 mm, grinding wheel diameter max. 250 mm, grinding spindle drive power 9 kW, grinding spindle speed continuously variable 1000 – 9000 rpm, connected load 400 V / 50 Hz / 21 kVA, Dimensions W x D x H 1470 x 2980 x 2200 mm, weight approx. 4000 kg, color turquoise/light gray. Accessories: Quinto software for cylindrical milling cutters with sharp edges, corner radius, and full radius, Quinto software for conical-spiral tools with sharp edges, corner radius, and full radius, Quinto software for drills and step drills, Quinto software for Hertel drills, Quinto software for wood drills, Quinto software for profile tools, Interactive slot simulation software, eGrind software, External programming PC, Cylindrical grinding axis 600 rpm, Glass scales on the linear axes, Internal loader, Hydraulic steady rest, Manual tailstock, Measuring probe, Disk probe, Dkslsv N Hznoq Stdijl Optical profile control camera (OPC), Electrostatic vapor separators, Automatic central lubrication, Automatic fire extinguishing system, Hydraulic workpiece clamping, Turbo Separator coolant cleaning centrifuge, Machine light, Spindle cooler and heat exchangers, automatic chucks with drawbar (Schaublin), Schunk chucks Erowa system, tightening jaws, collets Ø 3, 5, 11, 13, 15, 18, 22, 25, 32 mm, loading pallets for Ø 6, 8, 10, 12, 25 mm. Pickup: Pickup by yourself

Condition: refurbished (used), Functionality: fully functional, Machine for face and back grinding of carbide-tipped circular saw blades with extraction and fire extinguishing system; machine will be overhauled in-house after order confirmation! Photos are sample images. Dolq Stdsv N Eg Asiokl

Condition: like new (used), Year of construction: 2020, Functionality: fully functional, Service center with 8 controlled motion axes, including 2 simultaneously controlled servo axes, for the automatic grinding of saw blades (tooth shapes A, B, BW, and C according to DIN 1840, as well as special tooth shapes) with saw blade diameters • (40) 130–710 mm Ø in manual operation • (75) 130–560 mm Ø in magazine operation Device for the automatic grinding of chip breaker grooves in HSS and TK circular saw blades with a width of 1.6–6.0 mm; Consisting of: • Grinding device with additional CNC axis for freely selectable adjustment of the desired edge distance by corresponding data input (adjustment range from 0-3 mm) • Area of application: o HSS saw blades diameter 200-560 mm, tooth pitch 3-55 mm, tooth height max. 10 mm (incl. CBN grinding wheel AK-1203 (30 x 0.3 x 8 mm)) o TK saw blades diameter 200-500 mm, tooth pitch 8-28 mm (DIA grinding wheel AK-1403 (30 x 0.3 x 8 mm) required) • Increased positioning accuracy through lateral probing of the saw teeth • Air spindle with 30,000 rpm (required lift 225 l/min at 6 bar) • Advanced software "Groove grinding with programmable web width" • Air extraction (electrostatic: model 120) • HSS/HM fine filter system (modified coolant tank with extraction funnel, filter pump, external filter unit for HSS chips) Dslqjv Rp Nko Stdiokl • POLAR 2.9 cooling unit • Spacers for 32, 40, and 50 mm mandrels • Reducing rings (32/40 mm, 32/50 mm) • Saw blade mandrels for 40 mm and 50 mm saw blade bores • 40 mm and 50 mm magazine accessory kit

Condition: used, Year of construction: 2006, feed length Z-axis: 1,340 mm, For sale is a Junker Jumat 5000 year of manufacture 2006 Technical data see pictures. Deljt Hu Duoq Stdijkl Sold ex location (61279 Grävenwiesbach) for self disassembly. Optionally we can offer dismantling.

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, Demonstration machine BUB 50 CNC 3000 Center height: 500 mm Center width: 3000 mm Dkjlq Stev N D Hbjdiel 1 grinding wheel: 500/380 x 100 x 203 mm

Condition: ready for operation (used), Year of construction: 1990, Available immediately from location: Horizontal Surface Grinder ELB Type Optimal 6375 ND Year of manufacture 1990 Table 1000 x 370 mm Grinding length 1000 mm Grinding width 375 mm Dolqov N Azwj Stdiokl Installation height 375 mm Table load 300 kg Automatic feed Magnetic plate Drive 3.7 / 4.7 kW Coolant system Weight 4 tons Price: €5,750 plus VAT, ex location

Condition: used, Technical data: Speed: 2900 rpm Disc dimensions: 175 / 25 / 51 mm Dslq Sov Eadnetdiekl Motor power: 0.25 kW Dimensions (WxDxH), approx.: 370 x 220 x 235 mm